Different safety stocks for differnt storage locations?

Hi all,
Can any one tell me if it is possible to set two different safety stocks for two diffetent storage lacations for one materila?
If yes, How?
Thank you,
Utpal

Hello UNP,
Normally, planning is useally carried out at plant level, however you can do MRP at Sloc level as well.
Safety stock is planning data which is defined for entire plant where as reorder level and replinishment quantity can be defined saperately for each storage location, but not safety stock.
hope this helps.
Regards
Arif Mansuri

Similar Messages

Can we maintain separate Profit center for each Storage location?

Dear Friends
My Org structure is like below:
We have 10 profit centers, one plant and 5 storage locations.
Now my requirement is these 5 storage locations belog to 5 different profit centers.
Can we assign different profit center for each storage location?
Regards
Kiran A

Dear Mehmet Gunenc
It is not happening because the profit center area is defined as General plant parameters. It is denoting the Profit Center is at Plant level and not at storage location level.
Please check it.
Regards
Kiran

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

Stock in 3 storage location..

Hi Friends,
I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
I would appriciate, if you could write in steps to do config.
Thnks

Hi,
There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
Configuration
SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
Assign a stock determination group to the material in the material master record.
Regards.

GR for Sevaral storage locations

Hi to all
Plz explain this scenario
Iam storing same material X in different storage locations with in a plant.
Then how to do GR for Multiple storage locations in single process?
Thanks & regards
ravi

Hi,
During confirmation or reprocessing the goods movement we can split the goods movement. This can be done in Goods movement over view.
Functions:
1. We can change the reqmts qts , plant, sloc and special stock.
2.We can use the function split goods movements to enter sevaral goods movements for one reservation.
3. We can use this function if we withdraw material components from different sloc.
Confirmation : co11n/co15
Reprocessing confirmation: co16n
Regards,
nandha

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

DataBase Tables for fetching storage location text

Hi All,
May I know the database tables used for storing storage location text.
Regards
Nikhil
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 14, 2011 9:22 AM

Dear Jaques,
Check in these tables,
SER00                        General Header Table for Serial Number Management
SER01                        Document Header for Serial Numbers for Delivery
SER02                         Document Header for Serial Nos for Maint.Contract (SD Order)
SER03                         Document Header for Serial Numbers for Goods Movements
SER04                          Document Header for Serial Numbers for Inspection Lot
SER05                          Document Header for Serial Numbers for PP Order
SER06                          Document Header for Serial Numbers for Handling Unit-Content
SER07                          Document Header for Serial Numbers in Physical Inventory
EQBS                         Serial Number Stock Segment
EQKT                           Equipment Short Texts
EQSE                           Serial Number Records
EQST                           Equipment to BOM Link
EQUI                           Equipment master data
EQUK                           Quota File: Header
EQUP                           Quota File: Item
EQUZ                           Equipment time segment
Regards
Mangalraj.S

Turn off ATP for a Storage Location

Hi,
I want to turn off ATP for a Storage Location.
I am aware of a setting on IMG where we can have this done but not able to find the right node.
Can someone help me with it?
availability check NOT TO CHECK the stock at the storage location level
Thanks,
Mike

Availability checks can be triggered either automatically or manually:
The availability of components in an order can be checked automatically during order creation and/or order release. You specify in CustomizingOPJK per order type and plant whether the availability should be checked automatically. In addition, an automatic availability check can be carried out when the order is saved.
You can always trigger a manual availability check
The checking scope is defined via the Checking Group (in the material master) and the valid Checking Rule (in Customizing).
They define:
Which MRP elements are taken into account in the check
Which inventory categories are taken into account
Whether the replenishment lead time is taken into account
Whether the check is also to be carried out at storage location level
In Customizing (checking control) you specify which quantity is used to check the availability of a material. You can choose between the following:
Availability Check Against Planned Independent Requirements
In the check against planned independent requirements, the system only checks the open planned independent requirement quantities created for the components. This means that the ATP quantity is not included in this availability check nor are receipts or stocks.
This type of availability check is most useful:
if assembly planning or phantom assembly planning is used to plan the components
if quick statements about the availability situation are required and the results from this check are precise enough
The system uses the open planned independent requirements quantity at component level to determine a committed quantity and this quantity is copied to the planned order header in the Committed quantity field. As opposed to the availability check according to ATP logic, however, the committed quantity is not recorded in the dependent requirements. The planned independent requirements of the components are not consumed by the committed quantity but by the complete dependent requirements quantity. In availability checks that follow, the system can only commit quantities for the amount of planned independent requirements that have not yet been consumed.
In the availability check against planned independent requirements, the following dates/quantities are not calculated:
overall commitment date
partial commitment date/quantity
ATP quantity
In the check according to ATP logic, the system checks whether the dependent requirements of each component are covered by specific receipt and issue elements or by stock. This check is carried out dynamically, that is, each time you carry out the check, the system recalculates the current situation. If a quantity can be committed for the requirement date, the system enters precisely this quantity as the committed quantity in the dependent requirements and the ATP quantity for the components is reduced by the committed quantity. Therefore, in the next availability check, dependent requirements can only be committed for the amount of the remaining ATP quantity.

Stock transfer between storage location in IS -Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha

Planing via MD01 only for one storage location

Hi!
I have the following setup:
Plant p1 has storage locations sl1, sl2, sl3, ... sl9
In transaction mm43 (display retail material) I can see the following setup of the material:
Dispositionsparameters:
-MRP Type V2, ... and so on
Behind Button MRP/Forecast Data I can switch to for example storage location sl3 and there I can see
Storage Location MRP:
-SLOC MRP indicator = 2
-Reorder point = 50
-Replenishment qty = 70
I think its meant like the following: if the material in storage location sl3 is equal or below 50 then there will be a goods movement from the "main storage location" to the storage location sl3 with 70 pieces of the material. Afterwards there would be 130 in the sl3.
Maybe its a good thing to run "the report" every day in the evening so that the sl3 location will be filled up every day if necessarily.
Now the questions:
Is the transaction MD01 "the report"? I have no chance of setting up the storage location there.
Where can I check whats the "main storage location", the location where the replenishment comes from?
Some of my colleagues mentioned the Transaction MB26 where they check the planed for replenichment materials. Is this at all usefull in this context? They told me the list is reacting very slow... so if they run out of stock of some material then "the list" recognizes this 2 or 3 days later.
I am looking forward to your answers!
Regards
Manfred

What you setup in OMIR will just be the default for a material master created after this customizing, when an existing material will be extented or a new material will be created.
It does not impact the MRP run directly.
You have to maintain the MRP view in your existing materials for the desired storage location as well. There you have to enter this MRP indicator manually or with MM17.
However, the MRP will in general run per plant, for all locations, it will just plant the locations separatly if the indicator is set.
If you really want an extra run per storage location, then you have to use the user exit (you see the 2 fields at the bottom of the MD01 screen).
the user exit has to be customized in IMG > production > MRP > planning > user exit material seelection

Stock removal from storage location

Dear All,
System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
Please explain me any how to delete this stock from those storage locations.
Thanks in advance.
Thanks & Regards,
Krish

Hi sap gurus,
there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
Thanks
Pavan

Different safety stocks for differnt storage locations?

Similar Messages

Maybe you are looking for