Different SBA DNS SRV entry for the same dns zone?

Hello,
I got here a testlab with one enterprise pool and one sba deployed. The Branch Site got also an DNS Server installed. Both are using the same dns zone "test.com".
Of course now i got different server for the same SRV Record _sipinternaltls._tcp.test.com - one for autodiscovery in the enterprise pool and one for the sba. Also I want to add the second one as failover srv + the DNS Server in the Enterprise Pool should
be used as a Forwarder.
Now I got some issues how to deploy several entries on two different dns server for the same zone.
1.) If I add manually the same zone + DNS SRV entries on the SBA the dns is somehow not resolving/forwarding the entries on the other dns server in ee to other servers which are not on my SBA dns.
2.) If I only pinpoint the SRV entries for _sipinternaltls._tcp.test.com (one for sba and failover for ee site) the dns won't resolve the second a record to the enterprise pool.
What is the Best Practise for DNS SBA? Always point to the enterprise pool and, therefore, no other configuration is needed?
Regards DrWho

I played a little bit around. Problem was that I can not add the pinpoint dns srv entries via gui. Aditionally the tutorials did not work as my DNS server for SBA is not on a domain controller. In the end I did this:
sbafe -> fqdn of my sba
eefe -> fqdn of my frontend of enterprise pool
dnscmd . /zoneadd _sipinternaltls._tcp.test.com. /primary /file _sipinternaltls._tcp.test.com.dns
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 0 0 5061 sbafe.test.com.
dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 10 0 5061 eefe.test.com.
dnscmd . /zoneadd sbafe.test.com. /primary /file sbafe.test.com.dns
dnscmd . /recordadd sip.sbafe.test.com. @ A 192.168.10.220
dnscmd . /zoneadd eefe.test.com. /primary /file eefe.test.com.dns
dnscmd . /recordadd sip.eefe.test.com. @ A 192.168.0.40
Question is if that is a good best proctise or should the dns server within a zone contain the same records (Primary/Backup). The Client will then always hit the FE of the EE Pool first.
Also its quite a lot of work to setup.

Similar Messages

Outlook-2 different entries for the same person (but not the same email)

i was asked to switch from outlook 2007 to outlook 2013 as a trial.
For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
I switched back to Outlook 2007 and the issue is still the same.
any suggestions?

I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
To fix this:
Open the message and double click the address and view source
Just replace the generated Display As with the Display As you want
Thanks,
Ethan Hua CHN
TechNet Community Support

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

HT204053 can two different apple ids be used for the same imatch

can two different apple ids be used for the same imatch homesharing for music

Welcome to the Apple Community.
No.

Multiple entries for the same company.

Anybody out there have any idea how to enter multiple entries for the same company in Mail without having to enter all information every time for each individual. This was a very basic feature in MS Outlook. Possibly a workaround if not an option within Mail? Thanks.

Select a card with the details on it, and Edit/Copy /Edit/Paste (Command-C Command-V). Now edit one of the cards with the new individual's details. If starting from scratch, create a company card with no personal information and duplicate it as needed.
AK

Fixing duplicate database entries for the same audio file

My iTunes Media folder is stored on a network accessible storage server. Since upgrading to 11.1.x, my computer seems to be duplicating database entries for the same audio files - for some albums, I have 4 entries for every song, each one pointing to the exact same file. The only difference between entries is rating info and play counts, which are specific to a particular entry (I think). Has anyone else seen this behavior? Is there an obvious way to stop this from happening? I can delete and rebuild the database from media files, but that starts getting old if I have to do it every week or so. Is there a script to delete duplicate database entries? (I found a VB script on the iTunes for Windows community, but the offending machine is a Mac).
Thank you for any assistance!
K

Select the photo stack under the People tab and click the rename icon (bottom left)

Two different accounts to be posted for the same valuation class on PGI

Hi Experts,
Please note that we want to post two different accounts for the stock offset entry( based on the nature of customer ) in the transaction of PGI in SO. However the valuation class is the same as the nature of the material is same (only the nature of customers is different). We have put one of the two accounts in OBYC GBB - VAX and GBB - VAY.
Is it possible to have two offset accounts on PGI for the same valuation class.If yes, how will the system identify which one to be posted to.
Thanks in advance for answers..
KJU

hi
why not create two asset class to easily to separate two situations for two company codes? just a suggestion
or
maintain one depreciation key for asset class as a default, if for another company code, just change the depreciation key manual when creating asset master. it is not very complicate.
or
create two depreciation areas, one for each company code, then, you will have one useless depreciation for each company code -- not a resonable way
and, yes, that is the limitation of substituion in AA.
best regards, Lawrence

How to generate different report view in teststand for the same execution?

My requirment is to have two different view for the same report that gets generated during one execution using in TestStand OI(CVI)? One view would be summary view (displays only test step types, excluding action step types) and the other view is detail view that displays all the steps that are recorded. Data for all the steps needs to get recorded in database. Any suggestions are helpful!!
CLD,CTD

Hello.
I think you would have to create two separate reports, one as summary report and one as a 'full' report The viewers are just 'viewers' and simply display whatever you set to them.
I had display a text report that was basically a summary report ( failures only ) and then display an HTML report that contained all steps were set to be recorded. This required quite a bit of modifications on both the process model and the operator interface side. The operator interface (in LabVIEW ) had to contain 2 separate UIReportView controls.
Let me know if that is your desired direction and I could point you to some more ideas.
Thanks,
PH

In MIGO two seperate entry for the same Material in Accounting Document

Dear Expert,
Hi
Business is doing stock transfer transaction. Here with reference to stock transfer PO when business is doing Goods Issue.
here there is two stock transfer PO. in one PO there is two line items for the same material. in the second PO again same material with two line items.
but at the tme of Goods issue it is showing two seperate line for same material stock account credit in accounting document. but in the other Goods issue with reference to second PO it is showing only one line for inventory account credit in the accounting dcoument.
so pl. guide me on this.
thanks
H shah

Hi,
Step 1 : First we create the Stock transfer PO.
Step 2 : Goods issue with ref to above stock transfer PO ( Movement type 351) - MIGO
Step 3 : Goods Receipt with ref to above stock transfer PO ( Movement Type 101 )- MIGO
Thanks
H shah

Acessing my outlook calendar over web and if i have many entries for the same hour FF only shows up to 6 entries and IE shows them all...why?

In my companie we use firefox and we access outlook calendar from the web but every time we have more than 5 or6 entries at the same hour FF doesn't show them all.
I´m placing a ilustrating image in the "site url"

In my companie we use firefox and we access outlook calendar from the web but every time we have more than 5 or6 entries at the same hour FF doesn't show them all.
I´m placing a ilustrating image in the "site url"

Multiple entries for the same genre in iPod, but iTunes is fine

In the Genre list in my iPod, there are several copies of a few genres -- for example, there are like 4 or 5 "Dance" entries under Genres.
Each duplicate genre contains the same songs, and the total number of songs in my iPod matches iTunes. So why there are there multiple Genre entries, and how can I get rid of them?

A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song/genre name, which fools the iPod into thinking that there are two different artists or songs/genres. The trailing space is the hardest to spot.
Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".
This brings up the multiple song info window. If you see the "artist" field (or in your case, the genre field) is left blank, then there is a discrepancy with that name.
So to correct this, in the artist or song box retype the name, as you would like it, and then click ok. You should do this even if no mistakes are immediately visible.
Re sync this new artist/song info to your iPod.

When importing my address book from Outlook why do I have multiple entries for the same contact?

I have an address book and it contains one list in Outlook. I just downloaded Thunderbird and imported my address book. The address book and one list imported very easily but there are anywhere from 3-5 entries for each person in my contacts. If I delete the extras they are removed from my list as well. Why are there multiple listings for each contact and how can I remove the duplicates without losing my list entries?

as I was looking thru pictures in my finder I noticed there were several copies of the same pictures I had taken yesterday. I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved them to trash, then I thought I'd look it up when I realized its not just these pics, but very many had een stored in groups of three or four.
1. Why is that?
Depends on where you saw them - If they were in the iPhoto library iPHoto has either two or three different versions (no duplicates) or each photos in its library - this is not optional and can not be changed -- If they were not in the iPhoto library then you can do what you please with them and they have nothing to do with iPhoto - iPhoto is only involved with the photos in its library
2. Why is it advised to NEVER make changes to the structure or contents of iPhoto in Finder?
(as quoted Below)
"I would suggest using one of the proven safe programs - if you are going to manually remove them be sure to remember that you NEVER make any chnages to the structure or contents of the iPhoto library using the finder - only make changes using iPhoto"
Very simple - if you do you will destroy your iPhoto library and have to start over losing all work you have done in iPhoto - The iPHoto library is a SQLite database and there are NO user servicable parts in the iPhoto library and any changes made using teh finder will corrupt the database and cause dataloss
Is that a good enopugh reason for you?
So if these photos were in the iPhoto library when you
I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved them to trash,
You destroyed your iPhoto library and will either have to restore your backup from before you did this. put everything back EXACTLY like it was before or start over
LN

Multipe mac addresses entries for the same port (FE)-Switch 3560

Dear All,
I have a problem with a host whitch is connected to 11 port of my cisco 3560. from time to time the, the connection is lost with the host and after some troubleshooting i see two entries of mac-address table for the port 11.
I'm asking if someone has an idee how to explain this issue and how to see if this port is participing to SPT or...
I see also somme error of collision :
===================================
5 minute input rate 1000 bits/sec, 2 packets/sec
5 minute output rate 7000 bits/sec, 1 packets/sec
     64677029 packets input, 17167881111 bytes, 0 no buffer
     Received 39036768 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 39036088 multicast, 0 pause input
     0 input packets with dribble condition detected
     54722071 packets output, 8588329003 bytes, 0 underruns
     0 output errors, 992 collisions, 1 interface resets
     0 babbles, 2316 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
======================================
i have two routers in the same switch: my wan router + un other router used to conneced some separated hosts to internet.
If i use statif addressing for the second subnet (2 hosts + internet router), is there any risk for collision or broadcast domains or errors ?
is the second router distrub my LAN or WAN ?
Manay thanks for your help and support.
Best regards,

Hello,
For the first part of the question, I guess somebody might be connecting a hub to that port. If the hub is not negotiating the speed/duplex with the 3560 switch, then that port will go to half-duplex mode and you will see collisions on the port. That might also explain why you are seeing multiple MAC addresses on that port. Please check the port to see if the hub is connected and remove it. You can use features like port-security to ensure only one MAC address is registered on that port and people are not connecting hubs/dumb switches on that port.
For the second issue, you can certainly use static IP addresses as long as they are not overlapping with other subnets in your network. If they are overlapping, you do need to configure NAT on the router so that they are not affecting rest of the network.
Hope this helps.
Regards,
NT

Why do i have 2 entries for the same event in iCal?

I have just upgraded to OS Lion, purchased an iPhone 4S and have also moved to iColuds - why do I have 2 entries for all my events in iCal?

You can just delete the ones you don't want from the document Library. Be careful though, that you do not delete the symbol(s) that are being used on the canvas.
It's hard to say how you got so many duplicates in the first place without knowing your workflow.
My guess is that you created a new symbol every time you added something to the canvas, but that is only a guess.
HTH
Jim

Different SBA DNS SRV entry for the same dns zone?

Similar Messages

Maybe you are looking for