Different screen after video

I have a page with an image that triggers a video. At the end of the video, I need a different image with links for websites. Is there any way to do that without making the whole page on HTML?

Try covering the video with a button that has 2 actions. The first action plays the video. The second action displays an MSO state set to hidden until played.

Similar Messages

Windows XP hangs on 'spash' screen after video drivers installed on K8N Neo4-F

Hiya folks - got a MASSIVE post for everyone here... Sorry but I think it's necessary... Here goes:
I just upgraded everything in my computer except for the HDD. New case, power supply, etc. I started by copying all important data from my original HDD to a portable USB 2.0 drive. My data is safe, and intact on that drive. So... I formated and repartitioned the oroginal hard drive (1 partition), assembled the system and everything runs perfectly. The problems come later....
The Windows installation is insanely fast and smooth... and the system boots into Windows with no problems after installation is complete. I didn't even need to install the nVidia RAID drivers because windows detects my single SATA drive fine. The First thing I do upon seeing the desktop for the first time is: Install nVidia chipset drivers, then AMD Athlon 64 driver (both latest releases). I then restart and the system boots fine. After Windows starts, I'm asked for display drivers. I click 'cancel', as specified in my ATI installation guide, open up the ATI CD and install the drivers via the ATI autorun setup. At this point, there are no further drivers for me to install and NONE of them have an "!" near them. So I figure everything is A-Okay and restart... BAM!! - Windows hangs on the splash screen. The blue bar moves for about 10 minutes, then stops for 2, then moves for 2, and so on... This will go on FOREVER.
So... I boot into safe mode and uninstall the ATI software/drivers with the help of some other third-party programs, schedule a disk check with CHKDSK and reboot. I startup in Directory Services mode to allow the disk check to complete. No errors and the system restarts on its own (supposed to). Now the system boots in normal mode again, but no video drivers installed. So I download the latest drivers from the ATI website and install them. I restart, and WHAM! -- same problem. At this point I'm thinking "bad video card" so again I go into safe mode, remove drivers, schedule disk check, etc.... restart in Dir Serv mode... "one or more errors found" this time... but that's okay.
After the auto-restart I shut down the computer and unplugged EVERYTHING but the video card, HDD and one stick of RAM... then reset the CMOS, checked battery and PSU outputs (all fine) I then went back into the BIOS to ensure everything is set to 'as safe as possible' and restarted. Again I tried the latest drivers, and again the same problem after restart. So I then booted into safe mode, but left the drivers intactthis time. I scheduled another disk check and restarted again in Dir Serv mode. After system restart I shut the computer down and switched to my other RAM stick and booted... same problem. now I'm DEFINITELY thinking "bad video card" so I plug everything back in the way it's supposed to be, reset CMOS and restart with the Windows CD the drive. I again format the HDD, etc... and install Windows.
Now, with another fresh Windows install, having read multiple tech articles, I thought this could be an issue with the NV SW IDE drivers, so I installed the driver pack minus that driver. I restarted and the system boots fine. Next, I again tried installing the latest ATI drivers, restart, and SLAMMO! -- again the system hangs on the splash screen. So, rather than waste my time with disk checks, etc... I did ANOTHER clean OS install. This time I decided to try installing video drivers BEFORE the chipset drivers... no such luck. I restart and Windows hangs in the usual spot.
NOW, I'm REALLY getting upset and can hardly contain my fists of rage that crave to desimate the computer case and all its internal componets. Time to RMA the video card. I exchange the card for the same type, thinking this will solve my problem, I drive happily home with the new card. Wouldn't you guess it... SAME PROBLEM, on ANOTHER clean OS install!!! Now I'm thinking "bad mobo"? - I don't know because it boots fine and runs fast without video drivers, but it seems to be directly linked to the video card. So... I figure "okay maybe these nForce boards don't like ATI cards"... so I return the Radeon X700 and exchange for a BFG GeForce 6600GT. Yep, you guessed it, STILL the SAME problem!!!
I 'm pretty-sure the problem has got to be with the mobo but I can't be too sure. It doesn't seem too likely because the system boots and runs fine with basic Windows VGA drivers. Also, if I were to try and boot to VGA mode after encountering this problem, that would not work at all either, in any situation, other than after removing the ATI drivers or installing windows without them initially. Right NOW, as we speak, I tried uninstalling the nvidia drivers/software via safe mode, I ran disk check, etc... but the system will no longer boot in normal mode or VGA mode even without the nvidia drivers installed. I've formated the hard drive and am ready to reinstall again if I can find a solution to this problem.
If ANYONE can help me it would be EXTREMELY APPRECIATED! I'm not a dummy when it comes to computers but this is pure MADNESS!!! I couldn't even BEGIN to fit everything else I tried into this forum. I had to sum-it-up, but I will gladly answer any questions from you 'brains' out there and will monitor this site daily. I won't ask the question and disappear never to tell of the solution I may or may not find...
Thanks in advance,
Eilios

Quote from: EdwinGF on 26-October-05, 16:01:40
Hi,
If you only have one Serial ATA Hard Disk, then you don't need the nVidia RAID Driver. This driver is only needed when you set up a Serial ATA RAID Array or a Parallel ATA RAID array. For this you must have two identical hard drives in your PC, for RAID 0 and RAID 1 arrays.
nVidia SATA RAID drivers supports RAID 0, RAID 1, RAID 0+1, and JBOD. When you install at least two Hard Drives, prepare your mainboard to use SATA RAID and
set up the RAID Array style you want to use.
Then you will need to install the nVidia RAID driver, to allow Windows to "See" and use the drives correctly. This is done by pressing the F6 Key, inserting the nVidia RAID Driver disk , and "telling Windows" where to find the driver it needs, at the very beginig of the Windows XP setup process.
However if you install a RAID driver with just one SATA Hard drive, or two SATA hard drives, (this last scenario not set to be used in an array, but as two different use drives, lets say one for OS and one for MP3 Storage), then Windows begins to load, it will load the RAID driver, but since there's no RAID Array, Windows will keep "looking" for an inexistant RAID Array, and if there's no such RAID array, this will take forever.
That's why installing nVidia RAID Driver may hang your system (which as you saw is not really hung), at the Windows Splash Screen, it is just trying to find something that doesn't exitst.
NOTE: nVidia RAID Controller, supports RAID Arrays into both, the Serial ATA channels and the Parallel ATA (IDE) channels too. But for both options, you always need to have at least two identical hard drives installed to build up and use a RAID Array, which can only be seen by the nVidia RAID Driver, for both Serial ATA hard drives and Parallel ATA (IDE) hard drives.
NOTE: JBOD stands for Just a Bunch Of Disks = In this scenario, you can combine hard drives of different brands and/or capacities into one big drive that will be seen by Windows as one drive only.
NOTE: Even if you don't have any RAID array, you must install the nVidia nForce 4 Drivers. You can just leave the nVIDIA SATA Driver check box empty.
Hope this helps
I did not have any RAID or SATA drive in my system, actually these were disabled in BIOS. I had the similar experience though. BTW, why NF4 chiset driver is very important to install if Windows XP drivers can get the job done? Look at my link in the previous post.

Spotify only displays black screen after video driver crashes

Using Windows 8.1 64x, AMD 7800 series card with the latest AMD 15.4 beta drivers. This driver release is prone to crashing. Spotify, though, doesn't recover after the driver crashes and only displays a black screen. Restarting the program fixes the problem, but it shouldn't have to be restarted in the first place.

I am so sorry to hear this, was it after an ad, i should be able to help, could you also tell me which country you are based in!

FBV0 - different screen after execution

Hi,
I have following problem.Below is the business case
Park the Document
Post the Document using transaction code FBV0
In FBV0, i am putting company code, document number and fiscal year.
The screen shows is SAPLF040.
Is there any set up / configuration about this.
Because i have super user access, if i execute FBV0, i am getting screen SAPMF05A but user gets the screen SAPLF040.
Please give your inputs.
Thanks,

Hello,
There looks to be a screen variant assigned to the transaction FBV0. Please check this in the TCode SHD0. Please let me know your findings.
Thanks and regards,
Suresh Jayanthi.

I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine. The audio disappears

I've tried 2 different screen capture devices, and in both cases, audio stops recording after 20 or 30 seconds, but video is fine. The audio disappears with both programs. Does anyone know what is happening with my audio capture?

Update, I took the webcam home over the weekend and tried on my home network and the outcome was the same video fine - audio delayed, is this a Skype for desktop issue?

Mouse back/forward buttons don't respond after exiting from full screen Flash video

Yeah. Has anyone else encountered this? After viewing a full
screen video (YouTube, Hulu) and exiting (via the ESC button), the
back and foward buttons on my mouse stop responding. Really!
Usually I will have to go back into a full-screen video twice for
the buttons to get "stuck," and then it takes them several minutes
to regain their functionality.
I've had this going on for over a year now, and I'm finally
sick of it enough to where I want to get some help. I've narrowed
it down to the Flash player as being the culprit, and it happens on
every browser I've tried it on (Firefox 3: RC2, RC1, Beta5; Firefox
2; IE7; IE6; Safari 3.x). This started happening when I upgraded
the Flash Player and the first offending version would be the one
that introduced the current full screen Flash video technology. I'm
guessing it was 9.0.
I have a Logitech MediaPlay wireless mouse, Win XP SP2. I
have the latest version of Flash and the most up-to-date mouse
drivers.

I have the same exact problem, only a different model
Logitech. Have you found a solution? Thanks, Shawn.
[email protected]

White screen after Flip/Rotate in Video Settings - Quicktime 7.1.3

After I flip/rotate a video (Show movie properties, Video Track, Visual Settings), the preview screen changes to a plain white screen. I've attempted to remove and reinstall Quicktime 7.1.3 though this did not resolve the issue.
I'm able to do the flip/rotate using Quicktime Pro 7.1.3 on my MacBook Pro as well as on Quicktime on a PC although Quicktime Pro 7.1.3 on my Mac Pro gives me this problem.
If anyone has any clue as to what might be going on and what could be done to address this, I would greatly appreciate your assistance.
I've tested with different videos including .mov's from the Apple website (Get a mac commercials... using coded H.264) and have the same problem with all videos.
Thanks.
Mac Pro Mac OS X (10.4.8) 3Ghz processor, 4GB RAM, Quicktime 7.1.3, lots of disk space
Mac Pro Mac OS X (10.4.8)

I still don't have any solution to this issue. I opened a ticket with Applecare. The 2nd level technician was unable to resolve the issue. Has anyone else experienced a white video screen after doinga flip/rotate using Quicktime?

I cannot open youtube videos to full screen after downloading the latest version of flash. HELP

I cannot open youtube videos to full screen after updateding flash to the latest version (11. something) HELP! youtube says it is adobe's problem

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

MSI R9 270X - Black Screen after Win7 logo

Hello there.
About a week ago I upgraded my PC, buying several components and putting it to work. Here's the specs.
Main Board: M5A97 EVO R2.0
Bios Version: Latest
Video Card: MSI Radeon R9 270X TwinFrozr OC Edition 2Gb
PSU: Don't know
12v rail Rating of listed PSU:
CPU: AMD FX 8350 4.0Ggz BE SkAM3+
Memory: 8Gb Crucial Ballistix DDR3-1600Mhz
SSD/ HDD: Western Digital WD10EZRX-00A8LB0 1TB
CPU COOLER: The one that came with the CPU
Raid Card: Onboard
Sound Card: Onboard
OC: (Yes / No) Don't know
Operating System: Win 7 SP 1 64
So, it worked just fine for about 3 days. Last Saturday night I tried to open Google Chrome after some gaming and the the system froze. I got a screen with vertical black and white stripes. I had to reboot the system and it gave me a black screen, crashing again, after the Win Logo at start up. At this time I was running either 14.7 or 14.9 ATI drivers.
I could only start the PC on Safe Mode. Removing the drivers and getting Windows general VGA card settings would allow me to use Windows in normal mode though. Once I installed the Graphic Card's drivers it crashed on reboot, always with the black screen after Win logo. I installed several ATI drivers, namelly 14.9, 14.11 beta, 13.12... and nothing worked.
I flashed the Mother Board BIOS to the latest version, formatted the HDD doing a fresh install of Win 7, installed Catalyst first and then the drivers, the drivers without catalyst, etc. and nothing worked, always getting a black sreen on reboot once the Graphic Card's drivers were installed. I even swapped the Graphic Card to a different slot to no avail.
Right now I'm using my old Radeon HD 5670 with the latest drivers and everything works just fine. It even works fine if I keep both Graphic Cards installed with the monitor plugged to the older card. I find this odd since to do so, Windows loads both cards drivers with no errors. But once I switch to the new card everything goes black.
Can someone help me out? I've tried to contact my vendor's technical support through mail but they're not answering. I fear that I'll have to report it as DOA and swap it out, which will take quite some time taking into consideration the way things tend to work around here.
EDIT - I don't have a 2nd system to test it on.

Nope. Not driver issue at all. I tested at least 3 different drivers, all with the same result. Besides, I used both Driver Fusion and Driver Cleaner and CClean to remove any non-deleted registry entries. Always got the same problem. Went as far as formating the drive and doing a clean Win install. The problem persisted.
Tried installing drivers without Catalyst to no avail. Tried installing Cataltst first and then the drivers. Nothing. It always crashed omce the drivers were installed.

Blank black screen in Videos in iTunes 6.0

After downloading 6.0, I clicked on the Videos button on the left of the screen and in the display window all I get is black screen with no video content to peruse.
Anybody know why?

I believe its blank because you havent added any videos yet. drag QuickTime-compatible movies (.mov or .mp4) to the library and they should show up.
I think it a very nice feature, as you can se the vidoe in several different screen-sizes, and if u pause a video at specific place it continous at the same place if you watch it the day after for example...

270X Gaming - Black screen after driver install

I just recently purchased an MSI R9 270X Twin Frozr Gaming.
I physically installed the board and booted my PC. Windows started fine, albeit in VGA mode. I then proceeded to install the latest AMD drivers for the card (13.11 Beta). I made it through installation and then rebooted. When I rebooted, I got a blank, black screen after the "Starting Windows" screen. I was unable to boot windows, so I restored to last known configuration and tried again with different drivers (13.9) with the same result.
Does anyone know why windows hangs when it loads the display driver? Any help would be much appreciated.
Thanks
Windows 7 x64 SP1 (fresh install)
ASRock Z77 Extreme4
Core-i5 3570K (no overclock)
4x4GB Corsair Vengeance (stock profile)
Rosewill CAPSTONE 550W ([email protected])
MSI R9 270X Twin Frozr Gaming (S/N 602-V303-03SB1309077057)

Hi everyone. I just wanted to give you an update. It seems I have resolved the problem.
After attempting other fixes (fresh Windows install, MB BIOS update, etc), flashing the BIOS of the video card fixed the problem. I used the BIOS version
015.040.000.000.002887. I believe the BIOS the card shipped with is 015.039.000.000.002887. Anyway, there are no problems now. I was able to install Catalyst 13.11 Beta 9.5 with no problems and no black screens.
I got the BIOS and ATIWinflash from TechPowerUp. I'd post links, but I am too new to the board.
Thanks guys.

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

Blank screen after poweroff

First of all, sorry for my language. I'm french (I've posted my problem on the french forum here but it hasn't been solved yet.
THE PROBLEM :
When I shutdown my desktop computer using any command ('shutdown -h now' 'halt' of using the syslinux poweroff, and even when I try to suspend with 'pm-suspend'), I have a blank screen when I try to turn the PC on. And then the screen says "no signal". Even the BIOS doesn't appear.
I have to use the RESET button of my tower to see the BIOS appear
First I didn't have the problem with the command 'reboot', but it's the same now (since I changed my CMOS battery).
And since that I have also to RESET several times to get the BIOS.
MY CONFIG :
- kernel : 3.14.2-1-ARCH
- openbox + slim
- bootloader syslinux
- graphic card : NVIDIA GeForce 8600 GTS + current Nvidia driver (my card is not recognized by 'nouveau')
- motherboard : ASUSTeK P5PL2-E
- BIOS version : 0904 (up to date stable version)
- CPU: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
- Screen : ACER G246HL (DVI connected)
WHAT I'VE TRIED SO FAR :
- unplug the computer, wait, plug it.
- reinstall the packages : nvidia nvidia-utils nvidia-libgl xorg-server xorg-xinit xorg-server-utils
- boot on the arch's liveUSB and shutdown from there >> same problem
- boot with the kernel options 'noacpi noapic nolapic'
- desactivate the QuickBoot option on the BIOS (it seemed to work but finally not)
- use the LTS kernel
- open the computer and clean everything inside, check that everything is OK, even change the CMOS battery
- run memetest86+ >> no error
- check the CPU temperature
WHAT I FOUND (quite similar):
http://support.asus.com/faq/detail.aspx … 732A11F1E2
Please help :'(
Last edited by cazuza (2014-05-04 16:12:43)

I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

Different screen after video

Similar Messages

Maybe you are looking for