Different Sender Service as expected! Please help...

Hi all,
I have an HTTP -> XI -> HTTP scenario with on both sides an SAP system. So the SAP systems communicate with XI through HTTP.
In the SLD i configured both systems. e.g. systemA and systemB.
SystemA sends data to XI and XI sends it to systemB (the receiver service is SYSB_100). This works fine.
Now, systemB sends a message back to XI, but in the monitoring it returns an error saying that it cannot find a receiver determination. If i look at the sender service name it says BS_SYSB_100 in stead of SYSB_100.
My configuration is done using SYSB_100 in the sender agreement etc. In the SLD i can not find anything saying BS_SYSB_100..
Does anybody know where to find the prefix "BS_"? I have looked all day, but i am not able to find it anywhere.. it seems that systemB sends it, but i am not sure.. systemB is ECC 6.0 system by the way...
Thanks in advance.
M. Leeraar.

Hi -
If your using the sender plain HTTP adapter, then you have to supply the service name (e.g BS_SYSB_100) in the query string of the URL. For example:
http://sap-ag.com:8088/sap/xi/adapter_plain?service=sender&namespace=urn%3Asap-ag%2Ecom&interface=%2Fsap%2Forders
If you're using an RFC/HTTP destination to send your request, check the destination in your source SAP system.
Any special reason why ur using HTTP adapter instead of proxy/idoc/rfc adapter for sap to sap communication?
Regards,
Jin

Similar Messages

Please help me, mail wont send!!! Please help me!!!!

Please help me, mail wont send!!! Please help me!!!!
I have not changed anything but today cant send mail!
Any help would be most appreciated.

Try deleting and recreating the account on the iPad.

Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

- Try here:
iOS: Device not recognized in iTunes for Windows
- Next try a different computer to help determine if you have a computer or iPod problem.

HT4061 I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me

I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me

Take it to an authorized service center or Apple Store in the country where the phone originated. Apple does not sell iPhones in Pakistan, nor will they ship them to Pakistan.

TS2755 the pic butten on messages is not working. can not send or recieve photos. please help.

the pic butten on messages is not working. can not send or recieve photos. please help.

Hi Beharley,
try resetting your network settings: Settings - General - Reset - Reset Network Settings. This works fine if something is messed up with your carrier bundle.
Regards, Peter

I have a iPad 2 and I can't send a text messege please help?

I have a iPad 2 and I can't send a text messege please help?

See Here > Troubleshooting Messages
http://support.apple.com/kb/TS2755

My iPhone has stopped working. I have insurance but Verizon isn't willing to send a replacement. Please help!

I have insurance on my iPhone 4 with the extended warranty. For the last few days, I've been having non-stop problems with the phone. Freezing, closing apps when it wants to, restarting itself. I called Verizon customer support and explained the problem. She tried to do basic troubleshooting on my phone but I had to stop the process because I wasn't near a Wi-Fi to do a hard reset after the basic troubleshooting. Which wasn't a problem.
So today my home button stopped working completely. I had to turn off the phone and turn it back on after opening an application because I couldn't do anything with it. So I called Verizon to see about more troubleshooting and the girl (who was very nice btw) helped me do a hard reset. The home button started working, but now has stopped working again.
The thing with the warranty on the phone.. when I bought the phone from someone, I was asked if I wanted insurance on the phone when I activated it. I said yes. So the insurance was added. Now that something is wrong with my phone, I am being told that the warranty should have never been added because I didn't get the phone actually from Verizon. I have been paying for insurance each month as long as I have had the phone. If not almost a year, maybe a little over a year? I'm not sure how long I have had the phone. So I have insurance on the phone right now.. and I cannot get my phone replaced. I do not work for Verizon, so if I am asked if I want insurance and I say yes, I expect and assume it's covered incase something goes wrong. Which is the point of having insurance. Now, it's a different story? I am confused and a little upset with the whole situation. The only thing the Verizon rep today told me was that she could refund me three months of charges on the insurance and get it removed for me. I did not agree to that and I didn't want the insurance removed as of right now until I get this fixed. I told her that it wasn't about the money for the insurance.
I am hoping someone with Verizon on here can help me with my phone situation because apparently it's something with software. Please help!

I would think that at the very LEAST you would be eligible for a COMPLETE refund of ALL charges for insurance paid thru Verizon! They were charging you for something you were ineligible for! Verizon has a record of whether or not you purchased the phone from them - otherwise how could they deny the claim!
It very sad to see how customer service and customer satisfaction has been lost here ... !

I need to know how to connect different projects in final edit - please help!

Okay, here's my predicament:
I'm editing a movie, but I've been putting each scene together individually. I have a different file for each scene, and sometimes even small parts of a scene were edited in a seperate file. Now I need to piece them together, but I don't know how. I'm a beginer with this, I only have a basic understanding of Premiere. I don't understand all of the technical stuff. It was hard to even word this properly, so I couldn't just search for an answer.
My original idea was to export all of the seperate scenes and then put those video files together in a project, but that didn't work. The size of the video too small. It only took up half of the preview screen. Again, it's hard to really explain what I mean, since I don't know the technical term for it. After that didn't work, I tried copying each clip from one file to another, but I didn't expect that to work. It didn't.
Is there perhaps some export setting that will not make the video too small? There are too many settings, and I couldn't try them all. Or is there something else I could do? Please help!

Put all your Premiere projects into the same folder (optional).
Create a new project.
Go to FILE > IMPORT
Select either
The entire folder where your projects are located (hence step 1) or,
The individual projects you want to bring in
Drag/drop whatever you want to a master timeline sequece in the new project and
Sell your movie.

I have a client round what quetions can i expect please help me this?

I have a client round first time iam going to phase wt type of quetions can i expect plese help me

hi venumadhv,
1. What is the typical structure of an ABAP/4 program?
ANS:-
 HEADER ,BODY,FOOTER.
2. What are field symbols and field groups.?
 Have you used "component idx of structure" clause with field groups?
ANS:-
 Field symbols:-
 Field groups :-
3. What should be the approach for writing a BDC program?
ANS:-
STEP 1: CONVERTING THE LEGACY SYSTEM DATA TO A FLAT FILE to internal table
CALLED "CONVERSION".
STEP 2: TRANSFERING THE FLAT FILE INTO SAP SYSTEM CALLED "SAP DATA TRANSFER".
STEP 3: DEPENDING UPON THE BDC TYPE i)call transaction(Write the program
explicity)
 ii) create sessions (sessions are created and processed.if
success data will transfer).
4. What is a batch input session?
ANS:-
BATCH INPUT SESSION is an intermediate step between internal table and
database table.
Data along with the action is stored in session ie data for screen fields,
to which screen it is passed,program name behind it, and how next screen
is processed.
5. What is the alternative to batch input session?
ANS:-
Call transaction.
6. A situation: An ABAP program creates a batch input session.
 We need to submit the program and the batch session in back ground.
How to do it?
ANS:-
 go to SM36 and create background job by giving
 job name,job class and job steps (JOB SCHEDULING)
8. What are the problems in processing batch input sessions?
 How is batch input process different from processing online?
ANS:-
PROBLEMS:-
i) If the user forgets to opt for keep session then the session will be
automatically removed from the session queue(log remains). However if
session is processed we may delete it manually.
ii)if session processing fails data will not be transferred to SAP
database table.
10. What are the different types of data dictionary objects?
ans:-
tables, structures, views, domains, data elements, lock objects, Matchcode
objects.
11. How many types of tables exists and what are they in data dictionary?
ans :-
4 types of tables
i)Transparent tables - Exists with the same structure both in dictionary
as well as in database exactly with the same data and fields. Both
Opensql and Nativesql can be used.
ii)Pool tables & iii)Cluster tables -
These are logical tables that are arranged as records of transparent
tables.one cannot use native sql on these tables
(only opensql).They are not managable directly using database system tools.
iv)Internal tables - .
12. What is the step by step process to create a table in data dictionary?
ans:-
 step 1: creating domains(data type,field length,range).
 step 2: creating data elements(properties and type for a table
field).
 step 3: creating tables(SE11).
13. Can a transparent table exist in data dictionary but not in the data
base physically?
ANS:- NO.
TRANSPARENT TABLE DO EXIST WITH THE SAME STRUCTURE BOTH IN THE DICTIONARY
AS WELL AS IN THE DATABASE,EXACTLY WITH THE SAME DATA AND FIELDS.
14. What are the domains and data elements?
ANS:-
DOMAINS : FORMAL DEFINITION OF THE DATA TYPES.THEY SET ATTRIBUTES SUCH AS
DATA TYPE,LENGTH,RANGE.
DATA ELEMENT : A FIELD IN R/3 SYSTEM IS A DATA ELEMENT.
15. Can you create a table with fields not referring to data elements?
ANS:-
YES. eg:- ITAB LIKE SPFLI.here we are referening to a data object(SPFLI)
not data element.
16. What is the advantage of structures? How do you use them in the ABAP
programs?
ANS:-
Adv:- GLOBAL EXISTANCE(these could be used by any other program without
creating it again).
17. What does an extract statement do in the ABAP program?
ANS:-
Once you have declared the possible record types as field groups and
defined their structure, you can fill the extract dataset using the
following statements:
EXTRACT <fg>.
When the first EXTRACT statement occurs in a program, the system creates
the extract dataset and adds the first extract record to it. In each
subsequent EXTRACT statement, the new extract record is added to the
dataset
EXTRACT HEADER.
When you extract the data, the record is filled with the current values of
the corresponding fields.
As soon as the system has processed the first EXTRACT statement for a
field group <fg>, the structure of the corresponding extract record in the
extract dataset is fixed. You can no longer insert new fields into the
field groups <fg> and HEADER. If you try to modify one of the field groups
afterwards and use it in another EXTRACT statement, a runtime error
occurs.
By processing EXTRACT statements several times using different field
groups, you fill the extract dataset with records of different length and
structure. Since you can modify field groups dynamically up to their first
usage in an EXTRACT statement, extract datasets provide the advantage that
you need not determine the structure at the beginning of the program.
18. What is a collect statement? How is it different from append?
ANS:-
If an entry with the same key already exists, the COLLECT statement does
not append a new line, but adds the contents of the numeric fields in the
work area to the contents of the numeric fields in the existing entry.
19. What is open sql vs native sql?
ANS:- by Madhukar
Open SQL , native SQL are the interfaces to create the database applicatons.
Open SQL is consistant across different types of existing Databases.
Native SQL is the database language specific to database.Its API is
specific to the databse.
Open SQL API is consistent across all vendors
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of
using it?
ANS:-
21. What is the meaning of ABAP/4 editor integrated with ABAP/4 data
dictionary?
ANS:-
22. What are the events in ABAP/4 language?
ANS:-
Initialization, At
selection-screen,Start-of-selection,end-of-selection,top-of-page,end-of-page,
At line-selection,At user-command,At PF,Get,At New,At LAST,AT END, AT
FIRST.
23. What is an interactive report?
What is the obvious diff of such report compared with classical type reports?
ANS:-
An Interactive report is a dynamic drill down report that produces the
list on users choice.
diff:-
a) THE LIST PRODUCED BY CLASSICAL REPORT DOESN'T allow user to interact
with the system
 the list produced by interactive report allows the user to interact
with the system.
b) ONCE A CLASSICAL REPORT EXECUTED USER LOOSES CONTROL.IR USER HAS CONTROL.
c) IN CLASSICAL REPORT DRILLING IS NOT POSSIBLE.IN INTERACTIVE DRILLING
IS POSSIBLE.
24. What is a drill down report?
ANS:-
Its an Interactive report where in the user can get more relavent data by
selecting explicitly.
25. How do you write a function module in SAP? describe.
ANS:-
creating function module:-
called program - se37-creating funcgrp,funcmodule by assigning
attributes,importing,exporting,tables,exceptions.
calling program - SE38-in pgm click pattern and write function name-
provide export,import,tables,exception values.
26. What are the exceptions in function module?
ANS:-
COMMUNICATION_FAILURE
SYSTEM_FAILURE
27. What is a function group?
ANS:-
GROUP OF ALL RELATED FUNCTIONS.
28. How are the date and time field values stored in SAP?
ANS:-
DD.MM.YYYY. HH:MM:SS
30. Name a few data dictionary objects? //rep//
ANS:-
TABLES,VIEWS,STRUCTURES,LOCK OBJECTS,MATCHCODE OBJECTS.
31. What happens when a table is activated in DD?
ANS:-
It is available for any insertion,modification and updation of records by
any user.
32. What is a check table and what is a value table?
Check table will be at field level checking.
Value table will be at domain level checking ex: scarr table is check
table for carrid.
33. What are match codes? describe?
ans:-
It is a similar to table index that gives list of possible values for
either primary keys or non-primary keys.
34. What transactions do you use for data analysis?
ANS:-
35. What is table maintenance generator?
ANS:-
36. What are ranges? What are number ranges?
ANS:-
 max,min values provided in selection screens.
37. What are select options and what is the diff from parameters?
ANS:-
select options provide ranges where as parameters do not.
SELECT-OPTIONS declares an internal table which is automatically filled
with values or ranges
of values entered by the end user. For each SELECT-OPTIONS , the system
creates a selection table.
SELECT-OPTIONS <SEL> FOR <field>.
A selection table is an internal table with fields SIGN, OPTION, LOW and
HIGH.
The type of LOW and HIGH is the same as that of <field>.
The SIGN field can take the following values: I Inclusive (should apply) E
Exclusive (should not apply)
The OPTION field can take the following values: EQ Equal GT Greater than
NE Not equal BT Between LE Less
than or equal NB Not between LT Less than CP Contains pattern GE Greater
than or equal NP No pattern.
diff:-
PARAMETERS allow users to enter a single value into an internal field
within a report.
SELECT-OPTIONS allow users to fill an internal table with a range of values.
For each PARAMETERS or SELECT-OPTIONS statement you should define text
elements by choosing
Goto - Text elements - Selection texts - Change.
Eg:- Parameters name(30).
when the user executes the ABAP/4 program,an input field for 'name' will
appear on the selection screen.You can change the comments on the left
side of the input fields by using text elements as described in Selection
Texts.
38. How do you validate the selection criteria of a report?
And how do you display initial values in a selection screen?
ANS:-
validate :- by using match code objects.
display :- Parameters <name> default 'xxx'.
 select-options <name> for spfli-carrid.
39. What are selection texts?
ANS:-
40. What is CTS and what do you know about it?
ANS:-
The Change and Transport System (CTS) is a tool that helps you to organize
development projects in the ABAP Workbench and in Customizing, and then
transport the changes between the SAP Systems and clients in your system
landscape.
This documentation provides you with an overview of how to manage changes
with the CTS and essential information on setting up your system and
client landscape and deciding on a transport strategy. Read and follow
this documentation when planning your development project.
For practical information on working with the Change and Transport System,
see Change and Transport Organizer and Transport Management System.
41. When a program is created and need to be transported to prodn does
selection texts always go with it? if not how do you make sure? Can you
change the CTS entries? How do you do it?
ANS:-
42. What is the client concept in SAP? What is the meaning of client
independent?
ANS:-
43. Are programs client dependent?
ANS:-
 Yes.Group of users can access these programs with a client no.
44. Name a few system global variables you can use in ABAP programs?
ANS:-
SY-SUBRC,SY-DBCNT,SY-LILLI,SY-DATUM,SY-UZEIT,SY-UCOMM,SY-TABIX.....
SY-LILLI IS ABSOLUTE NO OF LINES FROM WHICH THE EVENT WAS TRIGGERED.
45. What are internal tables? How do you get the number of lines in an
internal table?
How to use a specific number occurs statement?
ANS:-
i)It is a standard data type object which exists only during the runtime
of the program.
They are used to perform table calculations on subsets of database tables
and for re-organising the contents of database tables according to users
need.
ii)using SY-DBCNT.
iii)The number of memory allocations the system need to allocate for the
next record population.
46. How do you take care of performance issues in your ABAP programs?
Performance of ABAPs can be improved by minimizing the amount of data to
be transferred.
The data set must be transferred through the network to the applications,
so reducing the amount OF time and also reduces the network traffic.
Some measures that can be taken are:
- Use views defined in the ABAP/4 DDIC (also has the advantage of better
reusability).
- Use field list (SELECT clause) rather than SELECT *.
- Range tables should be avoided (IN operator)
- Avoid nested SELECTS.
i)system tools
ii)field symbols and field groups.
ans:-
Field Symbols : Field symbols are placeholders for existing fields. A
Field Symbol does not physically reserve space for a field,but points to a
field which is not known until runtime of the program.
eg:- FIELD-SYMBOL <FS> [<TYPE>].
Field groups : A field group combines several fields under one name.At
runtime,the INSERT command is used to define which data fields are
assigned to which field group.
There should always be a HEADER field group that defines how the extracted
data will be sorted,the data is sorted by the fields grouped under the
HEADER field group.
47. What are datasets?
ANS:-
The sequential files(ON APPLICATION SERVER) are called datasets. They are
used for file handling in SAP.
48. How to find the return code of a statement in ABAP programs?
ANS:-
Using function modules.
49. What are interface/conversion programs in SAP?
ANS :
CONVERSION : LEGACY SYSTEM TO FLAT FILE.
INTERFACE : FLAT FILE TO SAP SYSTEM.
50. Have you used SAP supplied programs to load master data?
51. What are the techniques involved in using SAP supplied programs?
Do you prefer to write your own programs to load master data? Why?
52. What are logical databases? What are the advantages/disadvantages of
logical databases?
ANS:-
To read data from a database tables we use logical database.
A logical database provides read-only access to a group of related tables
to an ABAP/4 program.
adv:-
The programmer need not worry about the primary key for each table.Because
Logical database knows how the different tables relate to each other,and
can issue the SELECT command with proper where clause to retrieve the
data.
i)An easy-to-use standard user interface.
ii)check functions which check that user input is complete,correct,and
plausible.
iii)meaningful data selection.
iv)central authorization checks for database accesses.
v)good read access performance while retaining the hierarchical data view
determined by the application logic.
disadv:-
i)If you donot specify a logical database in the program attributes,the
GET events never occur.
ii)There is no ENDGET command,so the code block associated with an event
ends with the next event
statement (such as another GET or an END-OF-SELECTION).
53. What specific statements do you using when writing a drill down report?
ans:-
AT LINE-SELECTION,AT USER-COMMAND,AT PF.
54. What are different tools to report data in SAP? What all have you used?
ans:-
55. What are the advantages and disadvantages of ABAP/4 query tool?
56. What are the functional areas? User groups? and how does ABAP/4 query
work in relation to these?
57. Is a logical database a requirement/must to write an ABAP/4 query?
59. What are Change header/detail tables? Have you used them?
60. What do you do when the system crashes in the middle of a BDC batch
session?
ans:-
we will look into the error log file (SM35).
61. What do you do with errors in BDC batch sessions?
ANS:-
We look into the list of incorrect session and process it again. To
correct incorrect session we analyize the session to determine which
screen and value produced the error.For small errors in data we correct
them interactively otherwise
modify batch input program that has generated the session or many times
even the datafile.
62. How do you set up background jobs in SAP? What are the steps? What are
the event driven batch jobs?
ans:-
go to SM36 and create background job by giving job name,job class and job
steps(JOB SCHEDULING)
63. Is it possible to run host command from SAP environment? How do you run?
64. What kind of financial periods exist in SAP? What is the relavent
table for that?
65. Does SAP handle multiple currencies? Multiple languages?
ans:-
Yes.
66. What is a currency factoring technique?
67. How do you document ABAP/4 programs? Do you use program documentation
menu option?
68. What is SAPscript and layout set?
ans:-
The tool which is used to create layout set is called SAPscript. Layout
set is a design document.
69. What are the ABAP/4 commands that link to a layout set?
ans:-
control commands,system commands,
70. What is output determination?
71. What are IDOCs?
ans:-
IDOCs are intermediate documents to hold the messages as a container.
72. What are screen painter? menu painter? Gui status? ..etc.
ans:-
dynpro - flow logic + screens.
menu painter -
GUI Status - It is subset of the interface elements(title bar,menu
bar,standard tool bar,push buttons) used for a certain screen.
The status comprises those elements that are currently needed by the
transaction.
73. What is screen flow logic? What are the sections in it? Explain PAI
and PBO.
ans:-
The control statements that control the screen flow.
PBO - This event is triggered before the screen is displayed.
PAI - This event is responsible for processing of screen after the user
enters the data and clicks the pushbutton.
74. Overall how do you write transaction programs in SAP?
ans:-
Create program-SE93-create transcode-Run it from command field.
75. Does SAP has a GUI screen painter or not? If yes what operating
systems is it available on? What is the other type of screen painter
called?
76. What are step loops? How do you program pagedown pageup in step loops?
ans:-
step loops are repeated blocks of field in a screen.
77. Is ABAP a GUI language?
ANS:-
Yes.
ABAP IS AN EVENT DRIVEN LANGUAGE.
78. Normally how many and what files get created when a transaction
program is written?
What is the XXXXXTOP program?
ans:-
ABAP/4 program.
DYNPRO
79. What are the include programs?
ANS:-
When the same sequence of statements in several programs are to be written
repeadly they are coded in include programs (External programs) and are
included in ABAP/4 programs.
80. Can you call a subroutine of one program from another program?
ans:- Yes- only external subroutines Using 'SUBMIT' statement.
81. What are user exits? What is involved in writing them? What precations
are needed?
82. What are RFCs? How do you write RFCs on SAP side?
83. What are the general naming conventions of ABAP programs?
ANS:-
Should start with Y or Z.
84. How do you find if a logical database exists for your program
requrements?
ans:-
SLDB-F4.
85. How do you find the tables to report from when the user just tell you
the transaction he uses? And all the underlying data is from SAP
structures?
ans:-
Transcode is entered in command field to open the table.Utilities-Table
contents-display.
86. How do you find the menu path for a given transaction in SAP?
ans:-
87. What are the different modules of SAP?
ans:-
FI,CO,SD,MM,PP,HR.
89. How do you get help in ABAP?
ans:-
HELP-SAP LIBRARY,by pressing F1 on a keyword.
90. What are different ABAP/4 editors? What are the differences?
ans:-
91. What are the different elements in layout sets?
ans:-
PAGES,Page windows,Header,Paragraph,Character String,Windows.
92. Can you use if then else, perform ..etc statements in sap script?
ans:-
yes.
93. What type of variables normally used in sap script to output data?
94. How do you number pages in sapscript layout outputs?
95. What takes most time in SAP script programming?
ANS:-
LAYOUT DESIGN AND LOGO INSERTION.
96. How do you use tab sets in layout sets?
97. How do you backup sapscript layout sets? Can you download and upload?
How?
98. What are presentation and application servers in SAP?
ANS:-
The application layer of an R/3 System is made up of the application
servers and the message server. Application programs in an R/3 System are
run on application servers. The application servers communicate with the
presentation components, the database, and also with each other, using the
message server.
99. In an ABAP/4 program how do you access data that exists on a
presentation server vs on an application server?
ans:-
i)using loop statements.
ii)flat
100. What are different data types in ABAP/4?
ans:-
 Elementary -
 predefined C,D,F,I,N,P,T,X.
 userdefined TYPES.
ex: see in intel book page no 35/65
 Structured -
 predefined TABLES.
 userdefined Field Strings and internal tables.
101. What is difference between session method and Call Transaction?
ans:-
102. Setting up a BDC program where you find information from?
ans:-
103. What has to be done to the packed fields before submitting to a BDC
session.
ans:-
 fields converted into character type.
104. What is the structure of a BDC sessions.
ans:-
 BDCDATA (standard structure).
105. What are the fields in a BDC_Tab Table.
ans:-
 program,dynpro,dynbegin,fnam,fval.
106. What do you define in the domain and data element.
Technical details like
107. What is the difference between a pool table and a transparent table
and how they are stored at the database level.
ans:-
ii)Pool tables is a logical representation of transparent tables .Hence no
existence at database level. Where as transparent tables are physical
tables and exist at database level.
108. What is cardinality?
For cardinality one out of two (domain or data element) should be the same
for Ztest1 and Ztest2 tables. M:N
Cardinality specifies the number of dependent(Target) and independent
(source) entities which can be in a relationship.
Tell me ur mailid. I will send more.

Plesae reward points if helpful.

Hi my partner used my email address and iTunes account to set up his iPhone and now both our phones have merged! Does anyone know how to separate these? Can he still use our iTunes account with a different Id or email! Please help!!

HI my partner used my apple id and email address when setting up his iPhone so when he turned on iCloud our phones merged!! How do we undo this? Can he still use my iTunes account with a different Id and can he change the email on his phone without losing information? Also iPad is linked too, the family uses this and I would like to keep my phone separate! At the moment nothing is sacred! Please help! We are not very good with computers!!

Several things here so let me attempt to clarify.
For iCloud the reason the contacts where removed from he other device is because you updated your contacts, in this case deleted them, and then iCloud updated the other device to match. By deleting the iCloud account on the device it will stop the device from using that iCloud account and therefore nothing will change on the other device. By using a seperate Apple ID you can still use the features of iCloud, Find My iPhone comes to mind, without your content (contacts, message etc.) merging with the other device
For iTunes, you cannot use two Apple IDs for one account however if you use the same account iTunes on your computer will keep the content on each device seperate very nicely. You can also configure the settings for iTunes and the App store on each device to keep the content from automatically downloading to the other device. What I meant by share apps and music is this. What happens if you find a game, lets say Minecraft, that you really like and it cost, as Mincraft cost, $6.99USD. You buy it and play for a while and then you realize that your husband really likes the game as well. If you both use the same Apple ID for iTunes he can download the $7.00ish game to his device at no additional charge. If you use seperate Apple IDs for iTunes well... it look like he will also be paying for the game to have it on his account. Same goes for Music and Movies
I hope that clears things up. Let me know if you have anymore question.

Certificate based authentication with sender SOAP adapter. Please help!

Hi Experts,
I have a scenario where first a .Net application makes a webservice call to XI via SOAP Adapter. Then the input from the .Net application is sent to the R/3 system via RFC adapter.
.Net --->SOAP -
>XI -
>RFC -
R/3 System
Now as per client requirement I have to implement certificate based authentication in the sender side for the webservice call. In this case the .Net application is the "client" and XI is the "server". In other words the client has to be authenticated by XI server. In order to accomplish this I have setup the security level in the SOAP sender channel as "HTTPS with client authentication". Additionally I have assigned a .Net userid in the sender agreement under "Assigned users" tab.
I have also installed the SSL certificate in the client side. Then generated the public key and loaded it into the XI server's keystore.
When I test the webservice via SOAPUI tool I am always getting the "401 Unauthorized" error. However if I give the userid/password for XI login in the properties option in the SOAPUI tool then it works fine. But my understanding is that in certificate based authentication, the authentication should happen based on the certificate and hence there is no need for the user to enter userid/password. Is my understanding correct? How to exactly test certificate based authentication?
Am I missing any steps for certificate based authentication?
Please help
Thanks
Gopal
Edited by: gopalkrishna baliga on Feb 5, 2008 10:51 AM

Hi!
Although soapUI is a very goot SOAP testing tool, you can't test certificate based authentication with it. There is no way (since I know) how to import certificat into soapUI.
So, try to find other tool, which can use certificates or tey it directly with the sender system.
Peter

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

Hello,
If you don't have an entry like "SQL Server Reporting Services (InstanceName)" in Windows Service Manager (Services.msc) then because SSRS service not installed on that machine. Install it, then you will see such an entry.
Olaf Helper
This is not an SQL issue it's a SC Service Manager issue. Reporting Services is installed and running on the SQL side. The problem is that as I am now aware I cannot get the Data Warehouse Server to register in the Service Manager consoles to connect that
with the canned reports and turn on Reporting Workspace. Any thoughts?
[ Blog] [ Xing] [ MVP]

JMS sender adapter setting. Please help!

Hi Experts,
I want to receive 4B2 PIP from BizTalk in PI. Therefore I am configuring Sender JMS communication channel.
I am having couple of doubts here.
1. What happens if "Transactional JMS Session" is checked or selected in processing tab? What happens if it is unchecked?
2. In BizTalk messages are getting queued if there was error in the first message. Actually the error is in the adapter engine because BizTalk has sent a message with wrong schema. So any subsequent message with correct schema is getting queued in BizTalk. What should be done so that correct messages are received in PI? Do I need to change anything in sender JMS communication channel?
Please help!
Thanks
Gopal

Hi Gopal,
1)notes for JMS adapter
Go thru these notes 790963,747601,746393,856346,802754,
837501 and 790224.
2)information regarding use of JMS Adapters,Go thru these links of help.sap.com
JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
Configuring the Sender JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Configuring the Receiver JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
JMS-Provider-Specific Settings:
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
And to deploy the jars which are given in the JMS Adapter link go thru this article "How To Install and Configure External Drivers for JDBC and JMS Adapters"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.doc
http://wiki.sdn.sap.com/wiki/display/XI/FAQ+J2EEJMS+Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D52011%26messageID%3D535575%23535575
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D46150%26messageID%3D466488%23466488
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Thanks
Ravi

Return Data from Oracle using a web service in AXIS - please help

Hi Forum,
I am very new to web services and Java tech. and recently I have been assigned to work with technology and I am struggling to learn it and need your help and assistance.
I am trying to return some data from a an oracle database but I have to do that using a web service and I am using AXIS. For example below is a simple program that returns two columns for the demo EMP table
import java.sql.*;
class emp {
public static void main(String args[])
throws ClassNotFoundException, SQLException {
Class.forName("oracle.jdbc.driver.OracleDriver");
// or you can use:
// DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:orcl","scott", "tiger");
Statement stmt = conn.createStatement( );
ResultSet rset = stmt.executeQuery("select * from emp");
while(rset.next( )) {
System.out.println(rset.getString(1));
System.out.println(rset.getString(2));
rset.close( );
stmt.close( );
conn.close( );
} but I do not know how to convert this into a web service.
Please help.
Thanks in advance.
Regards,
Ravi

The following code returns Document. I will be calling the below function to convert my Resultset to document. In my JWS file i simply call a method with parameters. can a web service method in .jws file return Document type. It shows error will doing so. Please help me.
public static Document toDocument(ResultSet rs) throws ParserConfigurationException, SQLException
 Document res_doc = null;
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 Document doc = builder.newDocument();
 Element results = doc.createElement("Results");
 doc.appendChild(results);
 ResultSetMetaData rsmd = rs.getMetaData();
 int colCount = rsmd.getColumnCount();
 while (rs.next())
 Element row = doc.createElement("Row");
 results.appendChild(row);
 for (int i = 1; i <= colCount; i++)
 String columnName = rsmd.getColumnName(i);
 Object value = rs.getObject(i);
 Element node = doc.createElement(columnName);
 node.appendChild(doc.createTextNode(value.toString()));
 row.appendChild(node);
 return res_doc;
 }

Sending object over socket - please help (urgent)

I have written a server/client application where server sends object to client.
But on the client I've received the first message "@Line 1: Get ready!!!" TWICE but NEVER the second message "@Line 2: Please input Start".
Please help me! Its urgent! I appreciate my much in advance.
The source for Server:
import java.net.*;
import java.io.*;
import java.util.*;
import sendNode;
public class TestSer {
     static sendNode sendNodeObj = new sendNode();
static String inputLine;
     public static void main(String[] args) throws IOException {
ServerSocket serverSocket = null;
try {
serverSocket = new ServerSocket(4444);
} catch (IOException e) {
System.err.println("Could not listen on port: 4444.");
System.exit(1);
Socket clientSocket = null;
try {
clientSocket = serverSocket.accept();
} catch (IOException e) {
System.err.println("Accept failed.");
System.exit(1);
OutputStream o = clientSocket.getOutputStream();
ObjectOutput out=new ObjectOutputStream(o);
BufferedReader in = new BufferedReader(
                    new InputStreamReader(
                    clientSocket.getInputStream()));
sendNodeObj.sendMsg="@Line 1: Get ready!!!";
sendNodeObj.typeNode=-1;
out.writeObject(sendNodeObj);
out.flush();
sendNodeObj.sendMsg="@Line 2: Please input Start";
sendNodeObj.typeNode=-2;
out.writeObject(sendNodeObj);
out.flush();
inputLine = in.readLine();
while (!inputLine.equalsIgnoreCase("Start")) {
     sendNodeObj.sendMsg="@Error, Please input Start";
sendNodeObj.typeNode=-1;
out.writeObject(sendNodeObj);
out.flush();
inputLine = in.readLine();
out.close();
in.close();
clientSocket.close();
serverSocket.close();
The source code for Client :
import java.io.*;
import java.net.*;
import java.util.*;
import java.applet.Applet;
import sendNode;
public class TestCli extends Applet {
static sendNode recNodeObj=null;
public static void main(String[] args) throws IOException {
BufferedReader stdIn = new BufferedReader(new InputStreamReader(System.in));
Socket kkSocket = null;
PrintWriter out = null;
try {
kkSocket = new Socket("127.0.0.1", 4444);
out = new PrintWriter(kkSocket.getOutputStream(), true);
} catch (UnknownHostException e) {
System.err.println("Don't know about host.");
System.exit(1);
} catch (IOException e) {
System.err.println("Couldn't get I/O for the connection to: taranis.");
System.exit(1);
InputStream i= kkSocket.getInputStream();
ObjectInput in= new ObjectInputStream(i);
try {
     recNodeObj = (sendNode)in.readObject();
System.out.println(recNodeObj.sendMsg);
     recNodeObj = (sendNode)in.readObject();
System.out.println(recNodeObj.sendMsg);
if (recNodeObj.sendMsg.equalsIgnoreCase("@Line 2: Please input Start")) {
out.println("Start");
} catch (Exception e) {
System.out.println(e.getMessage());
System.out.println("receive error.");
System.exit(1);
out.close();
in.close();
stdIn.close();
kkSocket.close();
The object to be sent:
import java.io.*;
import java.net.*;
import java.util.*;
class sendNode implements Serializable {
String sendMsg;
int typeNode; // -1 no ObjectNode;
// 1 right node, 2 base node, 3 left node;
Object objectNode;

You forgot to reset the OOS. ObjetOutputStream keeps a buffer of objects, so if you write the same object again with changes on it, you must reset the buffer.
out.writeObject(sendNodeObj);
out.flush();
out.reset();

Different Sender Service as expected! Please help...

Similar Messages

Maybe you are looking for