Different Service Desks in different clients in the same Solution Manager?

Hi
Is it possible to place different Service Desks in different clients in the same Solution Manager?
Concrete we plan the following scenario:
- Division 1
-- System 1,2,3, etc.
-- Service Desk in client 100
-- Monitoring for the whole trust in client 050 (still exists)
- Division 2
-- System 4,5,6, etc.
-- Service Desk in client 200
-- Monitoring for the whole trust in client 050 (still exists)
Is it possible to realize this scenario or are there any restrictions?
Thanks & Regards
Andreas
Edited by: Andreas Städler on Mar 19, 2008 5:52 PM
Edited by: Andreas Städler on Mar 19, 2008 5:54 PM

hi Neil
did u solve the problem still Struck let me know
we can access the same iview n no of clients. let me know any do u have any queries and other infomation
bvr
Edited by: bvr on Dec 2, 2008 6:32 AM

Similar Messages

HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

We have 4 iphones in our family and an Ipad. When we purchase music I would like for the entire family to be able to use it. Should each of us use a different apple account or should we use the same one.

We have 4 iphones and an Ipad in our family. When we purchase music, I would like for the entire family to be able to use it and then back it up to Icloud. What is the best and cheapest way for this to happen. Should we all have a different apple id or should we use the same one.

You will all need to be on the same itunes account ID.
You can however all have seperate icloud accounts aswel.

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

Is there a way to order several different iPhoto projects at one time, on the same order? (to avoid paying shipping on each individual project?)

Is there a way to order several different iPhoto projects at one time, on the same order? (to avoid paying shipping on each individual project?)

No, unless they're all prints.
(117535)

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

Settings > General > Reset > Reset Network Settings
Contact the carrier to troubleshoot.

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...

Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Hello,
Could you please clarify you have two email addresses [email protected] and [email protected] each with it's own password and you want these delivered to differnt OS X user accounts or seperate folders within Mail?
mrtotes

Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account?

Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account? My family shares one I tunes account but it would be nice to be able to have a different I cloud for family member. Is there a way to do this. Because the I cloud part on the setting on the phone and I pad are greyed out on the phones so you can't change the user.

If they are greyed out then usually this means that the account is not validated on that device. The Delete Account button at the bottom should still work and allow you to remove the current account form the iCloud Section of Settings.
To answer your question, yes. There are four places you can use an Apple ID on an iOS device:
Settings > iCloud
Settings > Messages
Settings > FaceTime
Settings > iTunes & App Stores
The iTunes & App Stores is the only one you want to use a shared (family) Apple ID account. The other three you will want a unique Apple ID for that person to prevent info merging or messages getting shared, etc.
Using Different Apple IDs for iCloud and iTunes

TDMS: is it possible to use sender and receiver client within the same SID

Hi all
I have a general question about TDMS: i always read that it is possible to refresh data from a productive system/client to a test system/client, e.g. PRD100 => DEV100. But is it also possible to refresh data from one sender-client to the receiver-client inside the same system using TDMS, e.g. DEV100 => DEV200.
i'm asking because if i start to build up a new client using tdms the first step is to build up the client using package "ERP Initial Package for Master Data & Customizing". This includes under point "data transfer" the step "lock the system" with teh following description:
Lock System
Activities
During data deletion in the receiver client, the tables are dropped. All clients in the system are affected by this procedure. Consequently, all users in all clients in the receiver system must be temporarily locked while the data deletion takes place.
The function for this activity locks only the current client. If the receiver system is a single client system, it is sufficient to execute the function. If, however, the receiver system is a multi-client system, the user in the other clients must be locked using standard means.
Anyone has any experience with this scenario inside the same system?
Regards
Adrian

You can run TDMS package on the same system and between different clients. However SAP don't recommend to run TDMS package on the same system.
There are 2 ways to delete data in receiver system: Array delete and drop insert.
You have to use Array Insert only which is usually very slow as it first select all the relevant entries from the tables in the target client and then drop it. So, it is slow.
Drop insert is much optimized and fast but the same can not be used in this use case.
That is the reason SAP don't recommend to have TDMS run in same system.

Two clients in the same server--Script??

Hi Folks,
1.I have two clients in the same server say 100(used for dev) 120(used only for testing).I had developed a script in 100 which I want to test it in 120.Now how to move this script in 100 to 120.
2.How to use includes in scripts and what is the usage?
Thanks,
K.Kiran.

<b>INCLUDE: </b>Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh

We don't want to synchronise the custom views on every client accessing the same account

Hi
In our company we have a few clients accessing the same exchange account (not as shared mailbox). Outlook always synchronizes the custom view settings and inbox view (such as sorting order) between all clients. We want to disable this behavior, say Client1
shows ExchAccount1 inbox sorted by categories, Clinet2 shows ExchangeAccount1 sorted by receiving time, maybe having set different default fonts and so forth.
Every client should be able to keep it's custom view settings even if the view is changed on another client accessing the same mailbox with the same login. Is this possible to accomplish?
Thanks already
[repost from MS Office Community forums at http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/we-dont-want-to-synchronise-the-custom-views-on/8ab7d79c-451e-4267-a43f-9d4a3182c076]

Hi wasiwasi,
Base on my knowledge, it is impossible to accomplish.
When you log the same mailbox on different clients, it will sync with each other, and save the last changed on the client.
Best regards,
Niko Cheng
TechNet Community Support

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Different Service Desks in different clients in the same Solution Manager?

Similar Messages

Maybe you are looking for