Different Service Types

Hi All,
Can any body please suggest me the difference between various service types available in integration directory..
- Business System
- Integration Process
- Business Service
Thanks and best regards,
Kulwant Singh

Hi
Business system :http://help.sap.com/saphelp_nw04/helpdata/en/7b/d4653fd1d3b81ae10000000a114084/content.htm
Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
A Business system will have an entry in SLD unlike a business service.
I configure  business service and not a Business system.  suppose a  client is not ready to provide  with his system details.
Integration process
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/exchange+infrastructure&
All the links provided in this thread would give u good insight into Inegrationprocess
Integration Process

Similar Messages

  • Is it possible to set the IMB Service Type Identifier on a per record basis

    From not doing any research, it looks like Presort applies the IMB Service Type Identifier to all records in the output file. Does anyone know if it's possibly to specify different Service Type Identifiers within the same Presort job?
    In my specific example I want to enable OneCode Confirm on specific records within the presort job, but not all records within the presort job.

    Hi Jay,
    You are not restricted to a single Service Type ID for every record in a job.  By using the PW.SRVC_Type input field, it is possible to assign different Service Type IDs to your records.
    Here's a more indepth how-to from our knowledge base:
    https://service.sap.com/sap/support/notes/1462718
    Thank you,
    Brandon Law

  • BPM 1:N split into different service interfaces

    Hi everyone, just a quick question about multimapping scenarios.
    If I want to make a 1:N message split in BPM I should use a transformation step and specify a multiline container element to get the result of the transformation. That multiline container element is bound to a single message type so, If I want to split my incoming interface into different service interfaces (based on different message types), how can I handle that in BPM? Or is it just not possible?
    Thanks in advance.

    Hi,
    It is possible to specify more than one container element for the resulting messages of the transformation step
    Its possible.
    In operation mapping in IR if you add 3 interfaces in Target side and the same mapping if you select in BPM transform step then it will ask for three contaner.
    Create 3 contaneir.
    Select type as Abstract Interface.
    Then select individual interface in those containers.

  • Automatic G/L account Selection in Service type Invoice

    Hello,
    I want to select G/L Account automatically in the service type Invoice instead of item type. How can i do that , can any body suggest me about that.
    I want a default G/L account selection for they service type Sales Order or Invoice. Please do suggest me.
    Thanks in Advance.
    Regards .
    Shrikant.

    Hi,
    Use Formatted Search to acheive your requirement.
    If all the service type Sales order or Invoice with same GL A/C Code use the following query
    SELECT 'XXXXXX'
    If all the service type Sales order or Invoice with different GL A/C Code use the following query
    SELECT T0.AcctCode FROM OACT T0 WHERE T0.AcctCode ='XXXXXX'
    XXXXXX - Means GL A/C Code.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Two different document types in MIRO

    Hi Gurus,
    Can we have two different FI document types in MIRO for Service PO and Normal PO?
    Standard is RE but we want one more.
    Can you please suggest something?
    Regards,

    You can work with your own document types but I do not hink you can have two different document types for Standard and Service PO.
    The effect of MIRO is still the same whether its Service PO or Standard PO - GR/IR debit and Vendor credit.
    If it is just for reporting, you can always take the PO number from RSEG table.Then drill down to EKKO/EKPO and get all the details.

  • Provisioning different User Type to different systems

    Dear Experts,
    Is there a way by which we can provision different user types to defferent systems via CUP?
    We have the following requirement:
    1. User created in ECC should be dialog user
    2. User created in BW should be service user
    3. User always selects ECC and BW at the same time in one request
    Thanks for your attention.

    Hi Tang,
    You can try this with creating 2 different  custom field or 2 unused field in end user form like employee type and some other field. Then you need to define provisioning field mapping for both of these system differently.
    Like you created 2 fields EEC_USER_TYPE  & BW_User_TYPE then while making provisioning field mapping you need to create 2 different group. EEC_Mapping and BW MApping and map the respective custom field with Provisioning field mapping group.
    I hope this will help you.
    Regards.
    Hemant

  • Service type documents

    Dear All
    When i copy the service type of GRPO to AP Invoice i am changing the GL code but system automatically delete the base document link. How to stop this?

    Hi K. Asupathy Raja ,
    for version 2007, please refer to SAP Note 1334491.
    System behaviour in version 8.8 SP0 pl16 is different in that the link between the documents is retained, even when the GL account is changed.Also, document status of the base document (GRPO) is changed to 'Closed'.
    All the best,
    Kerstin

  • A/P Down Payment Invoice Item/Service Type

    Dear Experts,
    Just wondering why in A/P Down Payment Invoice for the Item Type, the G/L Account i can view and select the G/L Account in a List. However, in A/P Down Payment Invoice for the Service Type i ONLY can view and select the only one G/L Account which i have been set at Adminstration-> Setup-> Financial-> G/L Account Detremination-> Purchase Tab for Down Payment Clearing Account.
    Your Reply is highly appreciated.
    Thanks.
    Regards,
    Danny

    The Clearing accounts is just that, a place where the down payment amount temporary sits, until it is cleared out through normal business processing. Having all the down payment amounts residing in a single expense account makes reporting this expense much easier from a General Ledger perspective.
    With that being said, you can create down payment clearing accounts at the Business Partner level, this giving you the ability to use different accounts: Business Partners > Business Partner Master Data  > Accounting > General Tab.
    Hope that helps.
    Mike

  • Different service orders have the same label

    Hi
       i have different service orders to create.( x service order, y  service order ...).    when i am clicking to create new service order of any type, the label is not changing.  
    the same label New: Service order is coming.   I want to change the label New:Service order to  x service order or y service order.....  depends on selection
    please suggest.
    ram

    hi ram,
    i guess u r not changing the long description of service order for that matter.
    change that and see

  • Cannot find ShipDate in Service Type documents

    I need delivery date (ShipDate) information in service type purchase order.
    I can set the visibility and active from form settings when I select item type purchase order but not service type purchaser order.
    Anyone can help on this? Thanks.

    Hello,
    You are correct this is SAP Process because when you select item then this items have different - different delivery schedule but in SAP service type document manage only header level info.
    And if you want to manage then make a UDF in marketing document ,UDF type should be Date then configure according you in Service document.
    Thanks
    MAnvendra Singh Niranjan

  • Item/service type

    hi all,
    In sales order content tab item/service type what is use of service type.
    in what condition we use this type
    thanks
    rahul

    Hi Rahul,
    please see the SAP Business One on-line-help file:
    Document Type and Summary Type Fields
    Item/Service Type Choose one of the following options:
    Item u2013 to create a purchasing document for items defined in the Inventory module.
    Service u2013 to create a purchasing document for a service that has not been defined as an Item in SAP Business One, such as a one-time consultation.
    The table view on this tab is different for each option.
    All the best,
    Kerstin

  • Join columns of different data types

    Can i join two columns of different data types in a single statement. Is there any cast or convert statement
    SELECT B~PARTNER AS RESP_GROUP
    FROM BUT000 AS B
    INNER JOIN CRMV_LINKPARTNER AS C ON BPARTNER_GUID = CPARTNER_NO.
    Here PARTNER_GUID is Raw 16 and PARTNER_NO is Char 32, the query is not returning any rows.
    Thanks
    Akila.R

    Hi!
    Basically we can say, you can't join them, but you might try this way:
    SELECT B~PARTNER AS RESP_GROUP
    FROM BUT000 AS B
    INNER JOIN CRMV_LINKPARTNER AS C ON BPARTNER_GUID = CPARTNER_NO(16).   "add
    (16)
    Or an other version
    C~PARTNER_NO+16(16)   "depends on, where is the real number stored
    Regards
    Tamá

  • Saving cluster of different data types to a file

    Hi,
    I use LV 8.6 SDK. I need to save clusters of different data types to a file on a disk, row by row.
    To be specific: I have a program that performs various investigations on a signal collected by DAQmx. Each time the quality of the signal is not in a specified boundaries, i get an indication. It is a cluster of time stamp, string, dbl, and Boolean. The program is supposed to run for few weeks in a row so there can be a lot of these indications. I expect to have around 200 000 rows a week (Altogether, divided into several groups).  
    I thought about TDMS but I am not able to save such a cluster. And I would like to save it as tdms cause i could divide the data to different groups. I also thought about data base but that would be the first time i use db and I really do not  have time to learn that now.
    I know it is possible to change some of the data types to others, ex Boolean to 0-1, but i need a string and a time stamp there. 
    Can someone advise me which data format should I use? Which one is the best one in this situation?
    Thanks in advance
    handre

    If you do not need to access data from another application (other than Labview) you can just save it as a binary file.
    It is the best choice (for me).
    I made an example with one cluster. You can replace that with an array of clusters, of that data type.
    Attachments:
    Example_VI_BD.png ‏2 KB

  • Store values of different data types into single database field

    Hi Friends,
      I  have to store values of different data types(character, numeric, date, time,  text, etc) into a single database field(Char 80). Then read the same values and display it into ABAP Webdynpro report. 
    Appreciate any ideas, examples, suggestions.
    Thanks
    JB

    Hi,
    Try like this:
    data: txt1 type string,
          var1(1) type c,
          var2(1) type n,
          var3 like sy-datum,
          var4 like sy-uzeit.
    parameters: a type c,
                b type n,
                c like sy-datum,
                d like sy-uzeit.
    concatenate a b c d into txt1.
    write txt1.
    var1 = txt1+0(1).
    var2 = txt1+1(1).
    var3 = txt1+2(8).
    var4 = txt1+8(8).
    write: / var1,
           / var2,
           / var3,
           / var4.
    Regards,
    Bhaskar

  • ACS 5.3 - 11033 Selected Service type is not Network Access

    I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3 
    I understand that by default, ACS only supports TACACS for device administration.  So I'll get this error when trying RADIUS:
    11033 Selected Service type is not Network Access
    Description:
    RADIUS requests can only be processed by Access Services that are of type Network Access
    Resolution Text:
    Verify that the Service Selection Policy rules are correct
    However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.  Any Ideas?

    If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
    Regards,
    Amjad
    Rating useful replies is more useful than saying "Thank you"

Maybe you are looking for