Different Srokes For Different TV's

I also have this question posted in the DVD SP Discussions as well, but this may be a Final Cut thing...
I made a project and used DVD Studio Pro 3.0.0 to make the menu and burn the finished DVD... I have now played it on three different televisions and have seen the video look different all three times. The DVD is in 16:9.
On my 50 inch Flat Screen the DVD was perfect.
On my 36 inch Flat Screen the DVD looked good, but some shots where the focal point was on an extreme side of the screen, half of it was cut off...
On my 36 inch regular television the DVD looked good, but the edgees were cut off on some shots as well...
How do I make it so that the DVD will look as good as it does on the 50" on all screens?
Why is this happening?
I made sure the shots all fit in the viewer within the green outline while working in Final Cut, so there shouldn't be any problems there...
Thanks,
Ham

If you get a 'calibration' DVD, like "Digital Video Essentials" or "The AVIA Guide to Home Theater", they include "overscan" patterns that will show you how far 'off' your TVs are. You may be able to find a copy at your local Blockbuster.
CRTs are sensitive to the line voltage and power supply 'drift' so they always overscan and edges are cut off -- 5-10% is not surprising. It's not as bad on LCD and plasma sets, but there's often a little bit cut off. The overscan settings are not in a 'user' menu, unless it's a projector, but are in the 'service' menu.

Similar Messages

Different layouts for different pages

hi all,
i have created a form in which there are 5 output pages but the print preview shows only the first page out of 5.i want to go to the next page.plz help how would i do that.and i want different layouts for different pages.
thnks n regards,
mukesh.

Hi Mukesh,
Read these lines which has been given in help.sap.com and also go through the link given below.
Main Window on Several Draft Pages :
if you want the pages on which a table with items is printed to have different layouts. Height and position of the main window may differ on the different pages, but the width must remain the same throughout.
[Main Window|http://help.sap.com/saphelp_nw70/helpdata/en/b1/243fdabeee11d4b633006094192fe3/content.htm]
Regards,
Sravanthi

How to display different icon, for different node of jtree

Hi All,
How to display different icon, for different node of jtree

you haven't responded to my last post here: [http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676|http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676]

How can i set different font for different tabs/pages

I want to set different fonts for different tabs/pages?
is it possible to do the same? If yes how?
I can change the fonts under tools>options>contents>advanced. but that changes global settings.
tried some add ons too- but that too changes the global settings.
some pages like tweetdeck do not display icons etc properly under custom fonts.
when i check "allow pages to select their own font" tweetdeck shows up fine but a number of other pages show fonts that are too big or some non standard fonts.
Is there a way where i can select site default fonts for some sites/tabs, and custom fonts for other sites/tabs?
otherwise i have to open different sites in different browsers- say i use my custom fonts- which apply globally, and open tweetdeck etc in Internet Explorer or Chrome etc. if i can have all tabs in one window/browser, that would be great.

It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

Tabular form - Different LOV for different rows

In a tabular form column, is it possible to have a select list whose values depend on some other column in the row? There doesn't appear to be a way to use #COL# notation to refer to current row values in the LOV query definition.
Ideas? Thanks

Hi Scott,
Thanks ..I formed some idea about APEX_UTIL.KEYVAL_NUM. I have a problem where I am not able to decide if I can make use of this package and solve..
Can you please have a look at this thread.. Re: Tabular form - Different LOV for different rows
I have a SQL which populates a tabular form on the page.Coulmn1 some text, Column 2 is to show a drop down as YES and NO. i am trying to freeze the option for rows 2,3,4 as NO, if the Option choosen in first is NO.
So, what I am trying to ask is..can I save my first selection in a global variable and use it in where clause of [select list query] the second drop down..Not sure how I can do this..Appreciate if you can show me a direction.
Thanks,
Chaitu.

Purchasing info records with different prices for different packaging

Hi,
hope, someone can help me.
We have different prices for different kind of packaging, but all the material is bought in the same unit, i.e. kg.
Let's say, usually you buy x kg in a drum, but sometimes you buy y (or x) kg in a bottle or in a bag.
We won't allow variable order units. Even if we would, it's not helpful, because we always order kg.
So the price depends on a criterion - I don't know, which to take. And we want to maintain the different prices in the info records.
Is there a solution?

Hi.
I went through the history of the problem.It seems that your base unit of measure is KG.Also you have mentined that same material is used in various plants.
You need to activate the variable ordering unit 2 in material master. This is present in the materila master Purchasing tab.Also note that this data is maintained at plant level. This will not have any impact on the materials which are presnt in the other plants.
After activating variable order unit in materal master. You need maintains the conversion factors from Order units to Base UOM.(Eg 1 KG = 1 KG, 1BOX = 10 KG etc)
Create inforecord for the material and maintain price in Base unit of measure.
In PO enter the order unit as BOX system will automatically calculate the price of BOX based on the conversion factors which are maintained in the material master.
I belive this is the simple and best solution for your requirement..
If you have any suggestions please let me know
Cheers
Umakanth

Customisation for PO Release (different Values for different Doc Types)

Dear Experts,
I need to configure for PO release procedure where in the Characteristics would be Plant (2 Plants), Doc Type (3 types - Standard PO, Imports PO & Capital PO) and Value (2 stage release: 0-100000 & >100000 INR for Std PO, 0-200000 & >200000 INR for Imports PO and 0-300000 & >300000 INR for Capital PO).
Please let me know where I shoud define the different Values for different Docs for the Release procedure to work properly.
Or let me know the entire procedure for achieving the same.
Regards,
MNP

Hi MNP,
You have to create different CLASSes in IMG with the possible combination of different characteristics,
EX. CLASS EKKO11 - Plant A, Doc type- Std PO, Value- 0-100000 & >100000 INR
CLASS EKKO22- Plant A, Doc type- Import PO, Value- 0-200000 & >200000 INR
CLASS EKKO33- Plant A, Doc type- Capital PO, Value- 0-300000 & >300000 INR and same for other plant
then assign these classes to the respective Release group.
regards,
Pravin

Pixi able to have different ringtones for different callers??

So after about 4 years I finally had to get rid of my trusty Treo 650. I went with the Pixi and just got it a few hours ago. So far I like the phone, but have not been able to figure out how to set up different ringtones for different callers. I am on call with my work and having a distinct ringtone for when work calls me is super important (they showed up as NO CALLER ID on the 650 if that helps figure this out) . Also it was nice having a few other distinct ringtones so I knew right away who was calling and made it easier to decide if I wanted to take the phone out of my pocket to talk to them. So I guess long story short:
1. Does the Pixi support distinct ringtones for different callers?
2. If so where do I set that up?
3. If not does anyone have any idea if this will be something that can/will be addressed in an upcoming software update?
Post relates to: Pixi p120eww (Sprint)

So after playing with my phone some more I figured out how to give contacts distinct ringtones...but I still havne't figured out how to give "uknown callers" (at least thats what the Treo 650 called them) a distinct ringtone. This ringtone is the most important one due to the fact that when work calls me they come up as "NO CALLER ID" (once again thats what the Treo 650 did, been lucky enough to have not been called out in the few hours since I bought the Pixi....yet).
Anyone have any idea how to set up a distinct ringtone for "uknown callers" in the Pixi??

Different aggregation for different Dimensions

Hello,
is it possible to have different aggregations on different dimensions.
I have following situation:
I have a measure per client and day.
I'm interested in the maximum per month from the daily sums over clients.
In the measure properties I can only choose between Maximum and Sum in general but not per Dimensions.
To clearify what i mean here is some sample data.
* * Client A * Client B *
* 2014-11-28 * 7 * 8 * SUM() = 15
* 2014-11-29 * 6 * 8 * SUM() = 14
* 2014-11-30 * 6 * 10 * SUM() = 16 <-- monthly max
* 2014-12-01 * 7 * 8 * SUM() = 15
* 2014-12-02 * 5 * 12 * SUM() = 17 <-- monthly max
* 2014-12-03 * 6 * 9 * SUM() = 15
This data is stored in my fact table with reference to date and client dimensions.
This example data would have to be reported as:
/* Report on measure
* * Measure *
* 2014-11 * 16 *
* 2014-12 * 16 *
* Report on measure per client
(max per client and month)
* * Client A * Client B *
* 2014-11 * 7 * 8 *
* 2014-12 * 7 * 12 *
Can this be achieved with SSAS? Didn't find any property for that on the measure.
Best Regards,
Thomas

Hi Thomas,
According to your description, you want to calculate different aggregation for different dimensions, right?
Based on your scenario, I tested it on AdventureWorks cube, the query below is for you reference.
with member [Customer].[Country].[USA & Canada] as
Aggregate( { [Customer].[Country].&[United States],
[Customer].[Country].&[Canada]
member [Measures].[MaxAmount]
as
max([Date].[Calendar].currentmember.children,[Measures].[Internet Sales Amount])
select {[Customer].[Country].&[United States],[Customer].[Country].&[Canada],[Customer].[Country].[USA & Canada]} on 0,
[Date].[Calendar].[Month].members on 1
from
[Adventure Works]
where [Measures].[MaxAmount]
Here is similar thread with yours, please see:
https://social.technet.microsoft.com/Forums/en-US/1bd493ef-f957-4fd5-916b-ee60639106c3/calculated-member-different-aggregations-on-different-dimensions?forum=sqlanalysisservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

HT201371 In the next ios update, could we get the fingerprint function to unlock the phone and open up different apps in one swipe, using different fingers for different apps?

In the next ios update, could we get the fingerprint function to unlock the phone and open up different apps in one swipe, using different fingers for different apps?

This is primarily a user-to-user support forum. Following is a link for feedback/suggestions to Apple: http://www.apple.com/feedback/

Making different signals for different color average of the pixcells

Hello, everyone.
I'll take image of paper money by webcam,
and get the color average of the bills
and fractionate the color average by wavelength range of each bills.
and I want to making signal releasing time differently for different color average of the pixcells.(to fractionate the kind of bills)
(I want different signal for different kind of bills)
my question is this:
(1)How can I connect the webcam to the Labview?
(2)How can I get the color average of paper money?
(3)How can I make Labview program for releasing different signals which has different releasing time for each color average?

Hi 박지성,
you can use the IMAQ for USB Driver. See this link http://zone.ni.com/devzone/cda/epd/p/id/5030. You can also use the integrated windows dll to get your picture.
Hope it helps.
Mike

Different price for different batches

hai, is there any possibility of maintaining differenet prices for different batches.
say for example i put 10 pieces into 1 batch and like that maintain 10 batches.
for each batch i want to maintain different prices.
is it possible.
Thanks in advance

The link mentioned talks about production / proportion units which deals with different conversions for different batches. For example in leather industry, basic unit may be piece but sales unit may be sq feet. And each piece has different area so proportion unit may be used.
But as i understand your requirement is just to have different prices for different batches but the units, conversions will remain the same for all batches.
Maintaining a batch specific price is a standard feature of SD pricing; create an access sequence with field batch (CHARG).
However one potential danger with this is when the user changes the batch, price will not be updated automatically (unlike when you update plant). To redetermine price automatically whenever batch is changed, you can use the exit below.
Include: MV45AFZB
Form: USEREXIT_NEW_PRICING_VBAP CHANGING NEW_PRICING.
Code:
if VBAP-CHARG ne *VBAP-CHARG
new_pricing = 'C'.
endif

Is there a way to have multiple color Guides so I can have different colors for different layers

Is there a way to have multiple color Guides in Illustrator and Photoshop CC so I can have different colors for different layers?

I think it's not possible "natively" to have this functionalty but I found these topics for Photoshop :
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4618
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4617
On this one, you will see a workflow which are well described.
http://graphicdesign.stackexchange.com/questions/6030/how-to-set-different-color-to-guides ai-ps-id-fw
I've not tested them but you should give it a try!

Different Srokes For Different TV's

Similar Messages

Maybe you are looking for