Different stock between Acount view and Plant stock in MM03

Hello Experts,
In MM03 Acount view, I found the Total stock is 1, but in plant stock view, I found the stock is Zero.
There is not really any physcial invnetory so it must be a problem on the report.
And on mm03 that it was only on the finacial view screen that stock showed, it does not show on the normal stock screens.
What cause this difference? and How to clear the stock from the financial view?
Thanks

Hi
Please run MB5K for the problem material. If it shows difference, then there might be inconsistency between accounting stock and plant(storage location) stock. If that is the case, physical inventory can't help. The correction(direct table update) is necessary and can only be done by SAP.
Hope the information helps.
Regards,
Polly

Similar Messages

What is difference between bus.Area and plant

dear experts,
what is difference between bus.Area and plant?
thanks
Rajakarthik.

Hi
Plant and Business Area are not the same.
Business Areas are configured in FI module as per the Product lines or geographical operations basis.
Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
You can post a business area to several company codes and use it for cross-company-code reporting.
The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
Re: Business Area and Plant
Regards

Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

Diffrance between saved views and workbooks

Hello Friends,
Good Morning ..
Could any one please tell me what is the diff between saved view and Workbooks. .?
It will be nice help for me.
Thanks .

Hi Jain,
Do not know if your question is already answered. Let me give you my thoughts on this subject ... start with what is a query.
A query definition is saved on the server. Never anywhere else.
Although people say a workbook contains a query (or several queries); it does not. It contains a reference to a query. The workbook can be saved on the server; or anywhere else that you might save an Excel workbook.
What happens if someone changes the query definition on the server? Answer: the next time you refresh the query in the Excel workbook, the new query definition replaces the old query definition in the workbook. Maybe. It depends on what change was made.
For example, if someone added a Condition to the query definition, the workbook will be virtually invisible to this. The Condition is available; but, is not implemented in the workbook. (Until the user of the workbook manually adds the view of the Condition and then activates it.)
For example, if someone changed the definition of a KF in the query definition, the revised KF will show up in place of the old KF in the workbook.
But ... if, for example, someone deleted the old KF and added a new KF, we get a different story. Now the old KF no longer appears (it does not exist); but, the new KF does not appear (it was not marked to be visible in the workbook).
About workbooks as views ... OK, a workbook may very well have a certain "view" of the query (drilldown, filters, et cetera). And, if the workbook is saved to the server in a Role where everyone can access it, this is good. But, if the workbook is saved to one's favorites, then this "view" is only accessible to that individual. Which may be good. Or may not.
A "saved view", on the other hand is stored on the server. So, it is available to all.
If you navigate in a workbook you can back up. You can back up, though, only as far as you navigated in the current session. You cannot back up to where you were in the middle of last week's session. Unless you saved that navigation state as a "saved view". Then, you can jump to that view at any time.
The downside of saved views is that they are easy for anyone to set up and difficult for most to delete.
- Pete

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Where can I find the relation between company code and plant?

where can I find the relation between company code and plant?
I need to the list of plants under a company code.
Which table?

yes,wayne weng .What you said is right.
Thank you very much!
My MSN:[email protected]

UFT 11.53 - toggle between keyword view and editor not working

Hello,
I have installed the enterprise version of UFT 11.53. I have patched it with Patch # 3 (00082) and Patch # 4 (00106) in order to get Chome v 37 support. Now when I try to toggle between keyword View and editor, it is not working. The editor is fine. The Keyword just set frozen and will not allow me to do anything other than, change it back to the editor
see when I click the toggle button...its frozen...see the toggle button is down.
It's so annoying. I'm going to have to uninstall it again.
Please help, if you know what's going on

Hello sfarren,
The forum you want is the HP Enterprise Business Community.
Right now you are in the consumer products forum.
I am guessing this link is the area you will want to ask your question at.
http://h30499.www3.hp.com/t5/Unified-Functional-Testing/bd-p/sws-Fun_TEST_SF
Good luck and hope it helps.
PS: You might have to register again to post on that forum.

Wrong position of objects / difference between editor view and browser view.

Dear Adobe
System info: Mac OS X 10.9, Muse 7.1 Build 329, Chrome, Safari and Firefox in the newest versions.
I use Muse since version 5 and this effect does exist 'til today (v7.1) without any changes.
Many times i have differences in the position of placed objects. But this missbehaviour is not realy logical. For example take a look to this illustration:
Left: Muse Editor, right: Browser (in this case its chrome, but the effect is identical in safari and firefox too)
Left you see one pixel space between the blue bar and the shadow (image-object). In the browser is the space bigger (2px). When i move the shadow-object in muse one pixel higher, then look this so:
The shadow is now within the bluebar. The position has changed in muse for 1 pixel, in browser around 7 pixels... i don't see, why.
Another example:
Left Muse Editor, right Browser... do you see the dramatic difference between?
I hope, this problem can be solved with a future version...
Best regards
Michael

This variation is due to the difference in the layout of text between Design view and Preview, which is representative of the variations that exist between browsers, OSes, devices and individual versions of each of those.
It's impossible to reverse engineer the structure of the objects from the screenshots, but how the objects or individual sized and positioned relative to one another is key to understanding (and explaining) what you're encountering.
If you provide the URL for this page I'll attempt take a look at it and provide some guidance for how to achieve the effect you're looking for within the constraints inherent in working with live text on the web.
(In case you're not already aware, you can Publish to a free trial site on Adobe Business Catalyst at any time using the Publish button. Using trial sites on BC is very convenient, even if you don't plan to host the finished site on BC.)

DIFF. between Quick Viewer and Query Builder

Hi experts,
can any body explain the difference between Quick Viewer and Query Builder with examples and can u forward the related material( how to create Quick Viewer and Query Builder ) other than help.sap.com.
useful answers duly rewarded
thanks in advance
sai krishna

my mail id: was [email protected], please send me the material
i will assign the points
thanks in advance
sai krishna

Hi, difference between database view and elementary search help

hi
pl. can any one tell me the difference between
database view and elementary search help,
and help view and elementary search help,
and database view and help view.
in the output i do not see any difference.
thanx.
rocky robo

HI
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields). If new fields are included in the table or existing fields are deleted, the view is automatically adjusted to this change.
Database view:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/36/74c0358373003ee10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/36/74c0358373003ee10000009b38f839/frameset.htm</a>
Elementary search help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8b/415d363640933fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/8b/415d363640933fe10000009b38f839/frameset.htm</a>
Help view:
Help views are used if a view with an outer join is needed as selection method in a search help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/42/81c1351181b73fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/42/81c1351181b73fe10000009b38f839/frameset.htm</a>
Regards,
Gunasree

Difference between Database view and Table

Hi there,
Can anyone tell me the difference between Database view and Table.
Will the Database view query be more faster than a database table?

Tables and database views can be defined in the ABAP Dictionary.
These objects are created in the underlying database with this definition. Changes in the definition of a table or database view are also automatically made in the database.
Data from several tables can be combined in a meaningful way using a view (join).
You can also hide information that is of no interest to you (projection) or only display
those data records that satisfy certain conditions (selection).
Database views implement an inner join. You only get those records which have an
entry in all the tables included in the view.
in views db modifications are not possible
views only contain data at run time
when they consult the database
in case of views the join definitions are already sstored in the database itself
whereas join as open sql is a query to oracle database as similar select statements
Views are optimized by SAP and stored in the repository while Joins
are in reports that needs to be compiled at every execution
Reward if helps
Regards,
Senthil
Message was edited by: senthil kumar

STO between stores of same plant stock in transit

Hi,
How could I keep the stock in transit if I perform STO between stores of same plant?,I have configured it through sale route it is working fine ,now I want to track the goods in transit ,so i need to do a transfer posting to keep the stock in transit, How will I do ?,
Any suugestions
Regards
Senthilnambi

Hi,
Use T-code MB5T to check what is in-transit.
See below solutions :
Create a Stock Transport Order and make your receiving Plant and suppyling plant identical, however your receiving Storage
location should be different and in config make your sending storage location as number default.
Or
Use MIGO >Transfer Posting>Other and select movement type 411.

Outbound delivery allows only the unrestricted stock for particular material and plant

Hi,
In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
I want the outbound delivery creation of a particular material and plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
I need to know how to configure this or how to solve my requirements.
Regards,
Ramesh N

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Sales Order stock E not displayed in Plant stock view MM03

Hello Experts,
I am wondering if it is normal that the sales order stock level (type E) owned by the plant of a material is not displayed in the MM03 view plant stock of the same material. Is it a standard behaviour? Could you please explain why?
Thanks for your help.
Regards

Hi
The valuated special stock (sales order stock, project stock) is not
displayed in the material master (Transactions MM01/MM02/MM03).
The valuated special stock is not visible in the accounting view of
the material master because the accounting view shows
MBEW-LBKUM / MBEW-SALK3. Valuated special stock does not update
table MBEW - only EBEW / QBEW.

MRP View and Plant parameter

Hi,
In our one plant, we are not running the MPR , it is use to mfg. of control pannel, but we dont required the MPR run this, but the material will be made thorugh production order, then Finsih material will come in stock so for this is it necessary to maintian all the MRP view or do the plant parameter settings or we can skip all MRP view in Material master.
regards,
zafar

In our one plant, we are not running the MPR , it is use to mfg. of control pannel, but we dont required the MPR run this, but the material will be made thorugh production order, then Finsih material will come in stock so for this is it necessary to maintian all the MRP view or do the plant parameter settings or we can skip all MRP view in Material maste
Maintain a MRP1 view and work scheduling View for the production material with out this you can't able to create a production order , In MRP1 view maintain MRP type as ND- No MRP
No need to do any Config related to MRP.

Different stock between Acount view and Plant stock in MM03

Similar Messages

Maybe you are looking for