Different storage location automatically pick for same material code

Hi,
As per my requirement,
We have two storage locations i.e Return Location and Finished Location and single plant and single shipping point.
At the time of Normal delivery system should be automatic picked Finished Location and return delivery system have to pick Return Location only.
I tried to do Storage location determination but system is not picking correct location. Kindly guide me.
Thank You!
Chakradhara

Check this thread
Creation of return order with ref to an Invoice
G. Lakshmipathi

Similar Messages

Create storage location automatically for movement type 261

Hi Experts,
Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
Did we missed any required configuration? Pls kindly advice on what we should do.
Thanks a lot. Really appreciate the prompt response.
Rgds,
MD

Here's the current situation,
We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
Thank you

GATP/ATP Check for Different Order Types for same material

Hi :
I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
In real time the atp and cumulative atp position should be same in R/3 and in APO.
Please let me know solution for this issue.
With Regards
Ashish Gupta

Hi Ashish,
Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
My scenario goes this way:
I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
Thanks in advance,
Susanth

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

Multiple physical inventory document active for same material-storage locat

hi experts,
I am using transaction code MI31 for creating physical inventory document for all materials at a particular warehouse(storage location). User is selecting direct generation of of PI documents in the transaction. If by mistake he presses execute button more than once system is creating as many copies of physical inventory documents. As per ERP system logic it sound very wrong to have multiple physical inventory document active for same material-storage location ( no batches or special stocks exist ).
Is there a message number or some standard setting to prevent such occurrence.
regards
Avinash

Hi,
Syetem won't create again physical inventory document, if allready PI is active for the same part number, plant, storage location & batch/valuation type.
Check your PI documnets
Regrads
KRK

Picking quantity from a different storage location during batch split??

Hi Gurus,
Have an issue with doing batch split in a delivery with batches from several storage locations.
Have delivery XXXXXX where I want to pick batches from several different storage locations.
I click on the batch split button and select the different batches and quantitys.
The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
Thank You for all Your help!
BR,
Christian

Hi Christian,
you have not jet got an answer -- here my suggestion.
You have to use the Userexit Mv50afz1. Here you can do some checks and you can do a popup, where you can sign the LGORT, where the batch is.
In any case, you need an ABAPer
In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
If nessesary create an ylips- Line of the position.
Use an assign-command to avoid the change of the index.
hans

Could WM setup same location in different storage location type ?

Hi
Now we have same part but which is bought from different vendor by currency RMB or USD.
We hope when we receive material, it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
If there is any advice, please tell me , Thanks
Thanks
Alice

Hi, Expert
Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
We use migo to receive these mateirals , most are in WM module, Some in IM module. Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails.
To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
Thanks
alice

Maintain new storage location for existing material codes

Dear,
We want to extend material master to more storage locations. Currently we have coding starting from 910000 for finish material and is configured for storage location FG01, now we want to extend all the codes with 91 series to storage location PR06 & QC01
The same needs to be done for many other material codes with different series.
Kindly give suggestions/solutions
Thanks
Vikram Sanghvi.

Hi,
You can use extend the material from Plant to plant or from Storage location to storage location.
or 2nd is that Go to SE16 to get all material from MARD Table. then
export in Excel and go to Mass mainteince in material master to extend the material.
try this one
http://www.sap123.com/showthread.php?t=158
this may help U !
Regards,
Pardeep Malik

How to extend material in storage location automatically???

Dear Gurus,
We have 9 plants in this company.
Every time we create a material we have to extend it in all plants.
Because it takes to long to do this one by one with MM01 we use mm17 and we created there a variant that extends the materials in all plants automatically.
Then we have 3 storage locations for each plant. we use MMSC: enter storage locations collectively, to extend each the material in all the storage locations of the company 9x3 = 27. This takes too long as a procedure.
Is there a way to automate this procedure, via rutines, codes, variants, ABAP etc??? and how should I do that??
Thank you in advance

Dear Friend,
In customization spro>>MM>>inventory management>>Plant parameters>>select your plant >>click on create storage location automatically
click that one, if your not extended the material to the particular storage location and doing the goods receipt to the particular storage location system will allow you to do that
Regards
Pramod

Movement type for blocking to a different storage location

Hi Gurus,
Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
Regards,
Kumar

Hi Kumar,
344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
Better use 343 for transfer posting from Block to Unrestricted.
If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
Then try do to TP for different storcge location for same plant with 343.

Automatic selection of products in a plant but differant storage locations

Hi Gurus
Here is a requierment from our client that is they maintain differant storage locations based on differant prices however they want automatic selection of products during sales order entry, based on manufacturing date like FIFO comparing differant storage locations with in a plant. if you have come across these scenario and other solutions relate to this
please share your experiance
with regards
Baalakrushnan.da

hello, friend.
yes, we have come across this. first, your material should be batch managed specifying FIFO. then, inventory/availability search should be plant level instead of storage location level.
i will try to get back to you with the specifics. but in the meantime, you could probably get your MM consultant to help you with this.
regards.

Different Storage Location required for RGA

Hi,
My requirement is that whenever Returns is done for SO, different Storage location should default, which is currently not happening.
For ex - Standard Storage location(0001) is determined whenever SO is created but we want that different storage location(say 0096 which is created for Returns) should be determined whenever Returns is created.
For these I have made the following config settings :
Defined 1000(Shipping Point Std) which is assigned to Plant(BPX1)
Also 1100(Shipping Point for Returns) is assigned to Plant(BPX1)
Storage loc (0001- std) is assigned to Plant(BPX1) and warehouse no (BP1)
Storage loc (0096 - for Returns) is assigned to Plant(BPX1) and Warehouse no (BP1)
In OVL3 following settings done:
Shipping Point (1000) , Plant (BPX1) than storage loc - 0001(Std)
Shipping Point (1100) , Plant (BPX1) than storage loc - 0096(Returns)
Still when we are creating returns storage loc 0001 is defaulting in Returns and NOT 0096 (Which is my requirement).
Kindly advise which config settings are still missing to determine 0096 storage loc in RGA.
Thanks in advance

Hi,
I have ticked the Plant and movement type in OMJ8, but still same storage location is coming while posting the Returns.
Thanks

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

Checking for storage location when picking

Hi all,
I'm trying to put some code in the picking requirement to check whether user enters a storage location when they pick via program LV07A111.
the storage location is in table LIPS (item table), however, this table is not populated at all. Do you know why LIKP (header table) is populated, but not LIPS? If LIPS is not populated, do you know of another table where I can check for the storage location after picking?
Thanks for your help.

Thank you for your reply.
I tried XLIPS and this table is unknown in include LV07A111.
Is there another table? Again, I need to read the storage location in the item level when picking.
Thanks.

Movement type authorisation for different storage locations

Hi sdners
can we make the movement type restricted to any storage location
Ex: i have 2 storage locations 1110 and 1114 in plant 1100
and i have two end user mst1 mst2
if so i want to make sure that mst1 is responsible only for issue goods from 111o
and he should not able to issue goods from 1114 vice versa to mst2
is there any possible configuration please let me know.
With regards
S.K.chaitanya

Hi
u can achive this through authorization
First
You need to activate the storage location authorization check for goods movements in config
SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
Then required control is achieved via authorization object M_MSEG_LGO.
Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
Vishal...

Different storage location automatically pick for same material code

Similar Messages

Maybe you are looking for