Different theme/interface of ios 7?

is there any way that you can change this? personally i think all the brightness and excessive amount white is annoying and ugly, ive been searching everywhere for a change to it, a black theme would be beautiful. and yes i know about invert colors, thats just as bad looking unfortunatly. is there any applications in the app store to change this? like a different theme, or even different theme for the keyboard at the most. it makes it such a hassle to see also :/

KentwoodWarrior wrote:
is there any way that you can change this?
No.
Forum Tip: Very often you can find an aswer to your question by using the Search box at the upper right.
Best of luck.

Similar Messages

How to do "default interface" on IOS XR?

Hi Guys,
Does anybody know an equivalent of “default interface” for IOS XR or a smart way to delete hundreds of attachment circuits for single physical interface?
Appreciate your comments.
Regards,
Vasil

Hello Vasil,
Use "no" with * to remove them.
For example we have gigabitEthernet 0/1/0/6 and we like to remove all the sub interfaces. Use "no gigabitEthernet 0/1/0/6.*"
To make the main config to default, use "no gigabitEthernet 0/1/0/6"
Before coming, you can use "show" to see what going to be removed:
RP/0/RSP0/CPU0:mercy(config)#no interface gigabitEthernet 0/1/0/6.*
RP/0/RSP0/CPU0:mercy(config)#show
Wed Oct 10 16:01:14.212 CEST
Building configuration...
!! IOS XR Configuration 4.2.1
no interface GigabitEthernet0/1/0/6.2
no interface GigabitEthernet0/1/0/6.3
end
RP/0/RSP0/CPU0:mercy(config)#
Regards,
/A

Copying page from one app to another: Different themes

All the threads on this forum for steps to copy a page from one app to another refer to Raj's instructions at Synonyms
What if the 2 apps involved have different themes? When I do the final step (f) in his procedure, that page will have Theme X and the rest of the pages will have Theme Y. How is this handled?
Will the new page just use the templates it needs from whatever theme the app it is imported into happens to be using? Or would it bring along the templates it uses from the old application?
Thanks

Raj's technique predates themes and has no connection with themes. A page has one numeric attribute that references a page template or is null.
Raj's technique never handled the case where the referenced page template didn't exist in the target application.
It's your job (see the caveat in that threat) to ensure that you don't reference non-existent shared components from the page being copied.
What if you do anyway? That isn't part of the solution that was presented but the answer is you have to repair the damage.
What you are saying, in effect, is that that technique for copying pages across apps really works best only if the 2 apps involved have the same theme, right?There are at least four cases: 1) the page template attribute is null so it will use the app's default page template which I believe is adjusted when you switch themes; 2) the page template attribute is not null and locates an existing page template which is a template in the current theme. In this case everything should work correctly; 3) the page template attribute is not null and locates an existing page template which is not a template in the current theme. In this case the referenced page template will be used at runtime, but the theme reports and/or switch theme functionality may not work as expected with respect to that page; 4) the page template attribute does not locate an existing template. I don't know what the result is in this case.
I also don't know if the template a page uses is considered to be part of a given theme based on the template's name or numeric ID.
Scott

When I download PDFs on my macbook I am given the option of saving them to iCloud and in Preview they are listed under iCloud. How can I then view them on my iOS devices? Help please.

When I download PDFs on my macbook I am given the option of saving them to iCloud and in Preview they are listed under iCloud. How can I then view them on my iOS devices? Help please.

Welcome to the Apple Community.
You can't share preview files to an iOS device. There are several other options for pdf's such as Adobe Reader or iBooks.

How to change the theme in the default profile so new users get a different theme

How can I change the theme (background picture, etc) for the default profile, so that when new users log in and get a new profile created, they get a different theme than the one they currently receive?

Hi,
If you want to get a different theme for new users, based on my understanding, it’s not easy, we can load the specific theme for all user because we can control OS to load this specific theme file.
The default location of theme file is:
C:\Windows\Resources\Themes
To configure OS load different theme for different user, I think this cannot be controlled by a registry key. It’s complicated to make OS choose different theme pack for different user, even more, the theme pack files are limited.
Here is some different but similar discussion about changing theme programmatically:
How do I change the current Windows theme programatically?
http://stackoverflow.com/questions/546818/how-do-i-change-the-current-windows-theme-programatically
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

BPM 1:N split into different service interfaces

Hi everyone, just a quick question about multimapping scenarios.
If I want to make a 1:N message split in BPM I should use a transformation step and specify a multiline container element to get the result of the transformation. That multiline container element is bound to a single message type so, If I want to split my incoming interface into different service interfaces (based on different message types), how can I handle that in BPM? Or is it just not possible?
Thanks in advance.

Hi,
It is possible to specify more than one container element for the resulting messages of the transformation step
Its possible.
In operation mapping in IR if you add 3 interfaces in Target side and the same mapping if you select in BPM transform step then it will ask for three contaner.
Create 3 contaneir.
Select type as Abstract Interface.
Then select individual interface in those containers.

Why can't i change background colour and choose different themes in iphoto 9.4.3?

I am trying to create an iphoto book as I have done in the past. I am now using iphot 11 9.4.3 and it doesn't give me different themes and I can't change background colours in the book like I can with 9.4.2

It looks like you'll have to reinstall iPhoto go get the themes back. To reinstall iPhoto:
On all Macs running Snow Leopard or Earlier
1 - delete the current application and, , all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
(10.5 and earlier) - HD/Library/Receipts folder
or from the
(10.6) - /var/db/receipts/ folder
On all Macs with Lion or Later Pre-installed
Deleting receipts is not necessary if your Mac came with Lion or later preinstalled.
Finally re-install iPhoto from the source it came from originally:
1 - (10.6 or earlier) from the disks that came with the Mac or an iLife disk.
2 - (10.7 or later) from the App Store .
OT

Using different themes on different pages?

Is there a way to use a different theme on different pages in a Keynote presentation? So, maybe one look on one slide and another on another slide?

I'm sure that there are multiple ways to accomplish this, but the one that occurs to me off the top of my head is to select the slides you want to change, pull up the Theme Chooser, and at the bottom it'll give you the option of applying the new themes to just the selected slides...
I've had several themes active within the same presentation with no problem.

Seperating management and normal service on two different LAN interfaces

We would like to keep administration and general service of Windows Servers seperate on two different LAN interfaces "A" and "B" (on "dual home" machines i.e. machines with two network interfaces).
Is this feasible so that no administration can be performed on LAN Interface A, all regular Services runs over LAN Interface A and all administration has to be done over B?
Reasoning for this is security - only certain people and machines would be granted access to the management LAN.
Any ideas how this is best achieved?
Thanks in advance

Hi,
We can use the firewall to achieve your goal.
Firstly, disable all the port in firewall of LAN B.
Enable the port which used by the services in firewall of LAN B.
After that all traffic from LAN B, which is not related to the services will be denied on the server.
This is the general method of protecting the server on internet. (It is usually to be performed by a hardware firewall).
Best Regards.
Steven Lee
TechNet Community Support

CF9 and Ext JS - has anyone applied a different theme?

Has anyone had any luck applying Ext JS themes to override the built-in theme that ships with CF 9? If so, which theme did you apply, where did you get it, and what was your method?
My guess is that i can put any Ext JS 3.0 theme into my web site and then include the ext-all.css file and it should work. CF 8 allowed us to switch between themes (at least for some of the Ext JS functionality), which was cool because you could (in theory) add new themes on the server level and allow each of your applications to quickly choose. But this seems to be scrapped.
Ideas?

I was able to apply a different theme as follows:
First, I downloaded one of these: (very simple modifications of the default CF theme)
http://extjs.fudini.net/
Then I used the csssrc attribute in cfajaximport to specify where I want CF to look for the styles. You will have to rearrange the folders of your downloaded extjs theme to be exactly like the one that ships with CF. Look at the documentation for cfajaximport.
If you have control over your server, you could try putting new themes in the ColdFusion folder so they can be accessible by all your applications.
If anyone knows how to find some really cool extjs themes, please share!

Implementing 2 Different User Interfaces

Hi all,
i have implemented an application that communicates with a certain type of
digital camera, now there is the demand to support a second type of
camera with a slightly different user interface. My question is, can i use the
code that i already have (something like the DLL concept in Windows, i
believe its called creating my own framework in Mac OS X) and just switch
between interfaces when i detect the second type of camera?
This brings up the question of using 2 different ViewControllers as well.I am
not sure how to go about that at all. Can anybody give me some pointers?
Thank you very much!
Best Regards
artOf...

Imaplemeted a solution... will post it tomomrrow.

Tabs Styles in different themes

I'm using a blue theme #20 in APEX 3.1. This theme is fine for most of the templates except for parent and standard tabs. I like tab style in Theme #16 (Dark blue). is there way I can use those tab styles for parent/standard tabs from a different theme in my current theme. Especailly, my application needs standard tabs also similar to parent tabs as in Vikas's example below.
Vikas example page with tabs from Theme #16
http://apex.oracle.com/pls/otn/f?p=21826:2
My page exampe with tabs from Theme #20 ( needs to be modified as example above)
http://apex.oracle.com/pls/otn/f?p=54577:5
thanks for your help,
Surya

Hello,
You have to copy the HTML and the appropriate CSS from the page templates on theme 16 to theme 20. The images should still be linked correctly except for backgrounds images in the CSS section which you will have to relink.
You will also want to use Firefox with the Firebug addon to help trackdown the exact CSS. It will basically be an exercise in cutting and pasting it's just a matter of tracking down what you need.
Regards,
Carl

Two different themes in one application

Hello,
I am quite new to Apex and currently I have a problem which g**gle can't answer :-)
I want to set two different themes on some pages in the same application. When trying to change the theme on one page this can only be done for all pages in this application. Is there a possibility to reach my goal?
Thanks for your support
cheers, sebastian

Hi Sebastian,
It isn't possible to apply multiple APEX themes to one application, but the same effect can be achieved by applying one set of templates with multiple styles.
What you need is a theme that separates the style (CSS and images) from the structure (templates) so that multiple colour schemes can be applied to the same template set. Unfortunately the themes supplied with APEX weren't designed this way.
The general idea, that Matt mentioned, is to have multiple CSS style sheets and sets of images that can be applied to the same template set. This way, you can create two pages in the same application, with the same template set, but apply a different style/colour scheme/look and feel to each page by setting different paths to the CSS files and images at page level.
All of my themes work this way for exactly this reason. This article on dynamic theme switching might help explain the concept. Although the switching mechanism is presented to the user as a select list, this doesn't have to be the case. The "switch" could be made internally based on page number or some other condition.
-Stephen
APEX Themes

How can one add contacts to different email accounts in iOS 8?

I'd like to know if I could add contacts to different email accounts in iOS 8 without having to change the default Contacts account and only using my iOS device!

You should be able to -
If you go into Settings - Mail / Contacts
You see Groups at the top left corner
Adding to those groups will keep your contacts separate - although you have to check the group name for the contact to appear in the list

Any else having their IPAD 3 freeze up on them after loading ios 7

any else having their IPAD 3 freeze up on them after loading ios 7

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Different theme/interface of ios 7?

Similar Messages

Maybe you are looking for