Different time constraint for  0081-military service infotype and subty

Hello
I need as follows:
To enable entry for each desired valid Subty.
To enable ONLY ONE entry for each Subty.
Time constraint T is not allowed for 0081 so I used
Time constraint Z and I'm trying to maintain T591A.
But I don't find the expected entry which offer me to
define time constraint for each Subty.
Instead,  I have only the field "ObjId".
(Are there other IT which behave the same ?)
Regards
Zeev Gavish

hi allan,
cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
plz help me how will i replace this "hrforms with pe51"..

Similar Messages

  • Time Constraint for Subtype

    Dear All,
    I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
    Regards
    Mangesh

    Dear All,
    My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
    MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
    800     6     1     1          Permanent residence
    800     6     2     3          Temporary residence
    800     6     3     2          Home address
    800     6     4     2          Emergency address
    800     6     5     2          Mailing address
    800     6     6     2          Nursing address
    So please let me know the solution.
    Reagrds
    Mangesh

  • T. Code to Check Out Time Constraint for an Infotype

    Is there any central transaction code to check the time constraint for an infotype? What will be its IMG Path?
    Rgds,
    Tapan Shah

    Hello tapan
    go to SM30 -> V_T582A
    it is the table to configure infotypes
    regards

  • Change Time Constraint for Personal Data InfoType

    Hi,
    How to change the Time Constraint for Personal Data InfoType.
    I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
    Thanks

    Hi,
    you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
    But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
    ex:- without personal details like names no personnel will exist in an organization.
    regards,
    Soori

  • Time constraints for infotype 0185

    Hi experts,
    Need your suggestions,
    Is it possible to change the Time constraints for infotype 0185. What will be the impact if i change from 2 to 3 time constraints. Please explain...
    Shiv.

    hi,
    what i meant was standard time constraints should not be changed unless there is no other option.
    changing the time constraint is a quick fix solution.
    these standard time constraints are set after a lot of thought.
    like he referred 185  which is personnel ids.
    here you can see that it has sub types each sub type can have one record.
    you cannt have two passports .
    you cannot have two pan numbers etc.
    lets us sasy the end user enters some data wrongly and then he realises and creates another record for the same with out deleting the old one.
    the system will take it.
    but as you can see the data is already duplicated and it gives errors if some work flow or some other functionality is written basing on that input.
    regards
    nalla

  • No Time constraint for S 1001

    Dear Team,
    When I am trying to create a relationship to Position (S) or (C) Job, receiving a message as "There is no time constraint for S 1001". Unable to locate the exact error location in the customization.
    Could anyone know how to solve this. Not maintained any new objects or relationships.
    Thanks and Regards
    Team Member.

    Hi,
    Should have been standard for Position (S) and Job (C), but check table V_T777ZIT for IT1001 that the time constraint entry exists for the exact relationship you are trying to create.  If it does not exist, you will have to create the time constraint for that object and relationship. 
    IMG:  Personnel Management --> Organizational Management --> Basic Settings --> Data Model Enhancement --> Maintain Infotypes.  Select IT1001 and click on the folder on the left for Time Constraint.   Only one relationship at a time (Position described by one Job) - time constraint = 2.  More than one relationship at a time (Job describes many Positions) - time constraint = 3.
    Paul

  • Time estimation for HR Self Service implementation

    Hi All,
    What will be the best time estimation for implementing Self Service HR with moderate number of customizations (Generally custom workflow or workflow customizations) with 2 CRPs, one UAT and all AIM documentation.
    We have HRMS and Payroll already in place since more than an year.
    Appreciate your answers.
    Thanks,
    CAH

    Realistically it would take an experienced application person who could do the personalizations about 3 months in an existing implementation. This would include testing, training etc. Perhaps 2 or 3 weeks for an experienced person to customize the various workflows.
    If you have never done this application before, triple the time as you figure things out.

  • Time Constraints for objects and relationships

    Hi,
    How to set up time constraints for objects and relationships under Org Management?
    Thanks in advance.

    Hi,
    If you need time constraint for subtype A002 then you have to define it over here.
    Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
    regards
    guds

  • Time Constraint for IT 1007

    Hi all,
    Where can I change the time constraints for IT 1007???
    Thanks
    Amar

    would u please share it with us.....dude...

  • An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Hi I m getting the below wxpection when i run test browser from workshop. please help me.
    An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Thamarai,
    Can you provide more information on your jws ? Also can you start the server
    from the command line with verbose option. This will cause
    weblogic_debug.log to be generated in the domain folder.
    Raj Alagumalai
    Backline Workshop Support
    "Thamarai Selvan" <[email protected]> wrote in message
    news:[email protected]..
    Hi I m getting the below wxpection when i run test browser from workshop.please help me.
    >
    An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
    java.lang.reflect.InvocationTargetException:null

  • Delta update for Cube :  0CRM_PRI  - Service Orders and Confirmations: Item

    Dear experts,
    For Cube : 0CRM_PRI  - Service Orders and Confirmations: Item
    Source data is from Two ODS 
       1. Confirmations (Item Data)  : 0CRM_CNFI and
       2. Service Orders: Item Data : 0CRM_PROI
    I have done Init upload to this cube from both this ODS.
    I am not getting delta option to this.
    When I am trying update Delta after init from ODS message is No new deltas in DataStore object 0CRM_PROI for update. No delta option available . It is showing  Initial and Full Update option only.
    How i can initiate delta option for this Cube ?  Please update us.
    Thanks in advance.
    Regards,

    Hi,
    you can use DTP's to laod data from ODS to cube .. it will take deltas ..
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred. The data transfer process controls delta handling and therefore allows you to fill several targets with different deltas from one source. With a data transfer process, you do not need to explicitly initialize the delta method as you do when copying data with an InfoPackage.
    or you can create a sepeate Ip for delta apart form full and init .. that will laod delat data in cube ..
    Regards,
    shikha

  • I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it?

    I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it. Can anybody help?

    The application iExplorer may be useful in your situation. Read these links below
    I found this in another long discussion (on the ASC site) about this very same problem that you are having.
    http://www.blog.gleff.com/2012/03/app-store-unable-to-purchase-fix/
    This is the discussion.
    https://discussions.apple.com/thread/3681763?start=45&tstart=0

  • Different movt. types for GR against Purchase order and GR against Prd. Ord

    All SAP Gurus,
    Is it possible to have Different movement types for GR against Purchase order and GR against Production Order?
    Regards,

    yes my friend ,
    I dont know abt 131 movement type,i think so it is related to RUN SCHEDULE HEADER(rep scenario),order type is different to that in discrete.
    But you can do one thing for sure,you can try to create a new movement type copy of 101,and make MIGO allowed for the movement type,and you can easily distinguish between two movement type used for receipt two different functions....
    Plz correct me
    Enjoy SAP
    Rahul..

  • Can i use time capsule for back up my movies and watching them with my bravia tv

    can i use time capsule for back up my movies and watching them with my bravia tv.
    i mean can i use this for external hard disk drive to back up my movies and watching them with tv that has a lan port or wi-fi technology.

    Only if the TV is a media player.. the TC is dumb as a board router with a hard disk.. there is no DLNA which I suspect the TV requires.. you can get a player like the WDLive and it will play movie files from the TC to the TV.. remember the TC is nothing but a file store.. no servers .. no nothing.

  • How to display different Time Statement forms in ITS service PZ04

    Hi all,
    I am working on a underlyinge R/3 4.7 system and are working with standalone ITS and ESS 50.4. I am posting this question to find out if any of you has experience with my problem.
    The business wishes to use the ITS transation PZ04 standard and wish to be able to display different Time Statement forms in the transaction through customized variants for the report(RPTEDT00) that the PZ04 transaction executes. In the IMG it is posted that one variant has to be created called HRESS_TEDT00 and this works, but restricts the PZ04 transaction to always be called with this variant and therebye the same Time Statement form every time.
    I then by debugging found that the underlying ABAP code processed from SAP standard has a variable VARIANT that is hardcode to = HRESS_TEDT00.
    The question is: Is there anyway to setup the PZ04 transaction so that it can be dynamic decided which variant should be used, f.ex. from persons subarea from infotype 0001?
    Looking forward to here if anybody can help.
    Regards,
    Allan Brauer

    hi allan,
    cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
    plz help me how will i replace this "hrforms with pe51"..

Maybe you are looking for