Different times showing for an event

I received in invite from someone who is one hour behind me. He sent me a test invite ("Fake 2") for 10am my time, which is 9am his time.
In the Calender, the time is shown correctly, but when I click on it, it shows his time zone. Why is that? Why won't it show the time of the meeting in my time zone? Note that on my iPad, I see 10am in both cases.
This looks like this has something to do with the "Turn on time zone support" preference. However, I'd like to be able to use that function to change times if I want to set my Calendar to different time zones I'm visiting but see the actual time of the event in my time zone when I click it. If not, it can be a bit confusing to see two sets of times.
What am I missing?
Thanks,
Tony

Dispatching event from any component by either by using this or simply without this
can not be listen by each and every componet of the application,depends upon where you have write addListner. Check Event life cycle
in the flex. While if you are using the system manager for dispatching the event and
also for listenting the event so in that case you will always listen the event.
You can visit this link for making it simple to use and understand.By this way you can always listen your event
inside any component in your application.
http://shardulbartwal.wordpress.com/2009/04/15/managing-custom-events-in-flex-30-in-a-easy -way/
Hope it will help you.
with Regards,
Shardul Singh Bartwal

Similar Messages

My calendar appointments show for future events, but disappear once I reach the day of the event. So I can see tomorrow's appointments now, but they will be gone tomorrow. Why is this happening? It's on my iPhone and iPad.

My calendar appointments show for future events, but disappear once I reach the day of the event. So I can see tomorrow's appointments now, but they will be gone tomorrow. Why is this happening? It's on my iPhone and iPad.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Default time frame for ICAL events

Ever since I upgraded to Lion, the default time frame for ICal events has been set to "entire day". Is there any way to change this?

Hi,
If you add a time to the event description, like "meeting 11am tomorrow", it should create an event (with the title "meeting" on tomorrows date at 11am with a duration of 1 hour.
Best wishes
John M

Different time constraint for 0081-military service infotype and subty

Hello
I need as follows:
To enable entry for each desired valid Subty.
To enable ONLY ONE entry for each Subty.
Time constraint T is not allowed for 0081 so I used
Time constraint Z and I'm trying to maintain T591A.
But I don't find the expected entry which offer me to
define time constraint for each Subty.
Instead, I have only the field "ObjId".
(Are there other IT which behave the same ?)
Regards
Zeev Gavish

hi allan,
cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
plz help me how will i replace this "hrforms with pe51"..

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Time Constraint for Boundary Events

Hi experts.
I am pretty new to BPM (NetWeaver Developer Studio 7.1 SP04 BPM SP05) and I am just making a test process to try to get the time constraint concept right. So far I have three tasks in my process, very much like a textbook example. In my first task I have an input field in which you're supposed to type in your name, which is then saved to the context and triggers the second task when completed. That second task is nothing but a screen displaying "You successfully generated a second task, (with the name you entered in the first task here)."
That works fine so far. Then there's the third task, which is linked to a boundary event on the second event with a start deadline which is critical exception. Here's the idea... You complete the first task (name input), then you fail to start the second task within a certain amount of time defined by an expression, so the process should go to the third task because of the deadline. By the way, it works fine when using a default time, so I must be doing something right so far, the problem is when trying to dynamically change the time with the expression.
What I tried was to define a context attribute type time and date (I tried both) and assigning a time (current time plus whatever amount of minutes) to that attribute via Java coding at the time you click on the button which completes the task, then use that context element in the expression, but that didn't work. I also tried to make that context attribute an integer and set it to whatever amount of minutes I want to use for the deadline, then in the expression get the current time and add that afore mentioned integer to its minutes. That didn't work either.
Please help, I have seriously done some research, and no success yet.
Edited by: david.palafox on Jul 1, 2010 5:54 PM

Figured it out.

How do you change the time zone for all events?

I didn't have the correct setting checked for my time zone. It appears that I now have to go back and correct each event. Is that true? It would be impossible since I have over 1,000 events in my calendar.
Any suggestions? Thanks - Kris

Go to SETTINGS on your iPod Nano 6G.
From SETTINGS -> GENERAL -> DATE & TIME -> TIME ZONE and select the right zone/location form there.
Axel F.

Is it possible to have multiple lines of text show for an event in monthly view?

as an example, have a few lines of flight info show up without double clicking on event and it would be nice to have the entire event in a monthly printout too. Thank you.

Hi Scott,
Thank you very much for your reply and I apologize for getting back to this so late. I started using your suggestions today and I did have some success! The "shadow" button is very clever. Now, I think my lack of javascript syntax knowledge is keeping me from getting it all correct. I experimented with one field, a date field and I created the shadow button as you suggested and it worked perfectly!. The successful code I used for the click event for the gray button (see image below), was:
form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrShadowButton::click - (JavaScript, client)
if (form1.SSA.SF_Approver2RIF.Approver2RIFDate.rawValue == null) {
xfa.host.messageBox("Please fill in all required fields");
else form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrButton.execEvent("click");
However, I have not yet had luck getting the other fields in that row to work like the date field has though. I don't think I'm coding the "or' part correctly when I begin to add the fields (the next one I'm trying to add after the "or" is the "Name" dropdown list box, but maybet the dropdown list doesn't count as a "null" value like the Date field does?
My attempt at adding the name field so that two items are being checked is something like this but it does not work:
form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrShadowButton::click - (JavaScript, client)
if (form1.SSA.SF_Approver2RIF.Approver2RIFDate.rawValue == null){
or
(form1.SSA.SF_Approver2RIF.Approver2RIFName.rawValue == null)
xfa.host.messageBox("Please fill in all required fields");
else form1.SSA.SF_Approver2RIF.SubmitRIFToFinalHrButton.execEvent("click");
Thank you so much for any additional insights you or the other members may have. I really appreciate it!
-Chris

Why do my MacAir and iPhone show different times?

I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
Any idea how I can get them in synch with each other?
Many thanks!
James

I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
Any idea how I can get them in synch with each other?
Many thanks!
James

Adding One Event (Touch) at Different Times to One Symbol?

Hi,
I've searched to see if this has been answered. However, nothing seems to solve it fully.
The Problem:
I have a tablet design with multiple pages (three pages) and only one arrow button to move between pages in the lower right corner of the screen.
In theory, a user could press the button and the first page would deconstruct off and the next page would build on.
I would like this to happen for every page so a user can tap through the entire experience without swiping, looping back to the first page. I've been able to easily set up getting from the first page
onto the second (this uses the symbol for one touch event using triggers to start and stop).
The Question:
How to I make a button (symbol) do the same action at different times? For instance, from 1-2 seconds, the button action moves from page 1 to page 2. At 2-3 seconds, the button would then switch to be an entirely different click event for transitioning
between pages 2 to 3?
I just don't want to have to build multiple buttons and would rather solve this through code.
Thanks for any help!
Best,
-S

Hi,
So, your arrow will have a click event with a conditional statement:
if (sym.getDuration() == 1000) { sym.play() } //page 1 displayed
else if (sym.getDuration() == 2000) { sym.play() } //page 2 displayed
else if (sym.getDuration() == 3000) { sym.play() } ; //page 3 displayed
I assumed you put triggers at 1000, 2000 and 3000 with sym.stop();

Creating appointments in a different time zone with accuracy

I have my computer setup to set the date and time automatically. I also have iCal set to my current time zone. How do you create appointments for times in a different time zone with accuracy while you are in your current time zone?
For example, when I prepare for a business trip, I set my agenda in iCal while I'm at home. All of these appointments show up in my current time zone. When I get to my destination the times for my appointments are incorrect. I live in New York, but have a meeting in LA. The meeting is at 8:00 am PST. When I'm home, I set the appointment for 8:00 am, but by default, it is EST. When I get to LA, even if u change the time zone settings, the appointment shows up as 5:00 am PST. Do I need to set the appointment for 5:00 am while I'm at home in New York to take into account the time difference? Seems confusing and difficult to manage on a continual basis.
Any suggestions?
Mac

To elaborate further - what the current iOS manual says about times zones is:
_*When Time Zone Support is on, Calendar displays event dates and times in the time zone of the city you selected. When Time Zone Support is off, Calendar displays events in the time zone of your current location as determined by the network time.*_
Does that mean with time zone support off that when you move from one time zone to another and your phone readjusts its time setting that the appointment times are changed also or does it mean that the assumption is made that the event time is to be left as is. I believe it is the latter, but the description makes it sound to me like the opposite.
I do know that if one has time zone support enabled and you are in FL with an appointment with a California time zone enabled the time shown for the event will be 3 hours later. The description seems to say the opposite, but that was my experience in the past. In addition if time zone support is enabled and you change time zones, the time shown for the appointment will be changed.
For me at least a much clearer descrpition of what time zone support does is needed.
+*We need a checkbox that says adjust appointment time to correspond with time zone you are in in comparison to zone of event, and a checkbox that says:absolutely don't change the times I enter for events.*+
Message was edited by: waldhaus1

Time Constraint for Subtype

Dear All,
I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
Regards
Mangesh

Dear All,
My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
800     6     1     1          Permanent residence
800     6     2     3          Temporary residence
800     6     3     2          Home address
800     6     4     2          Emergency address
800     6     5     2          Mailing address
800     6     6     2          Nursing address
So please let me know the solution.
Reagrds
Mangesh

The time showing on Cisco Unified CCX Historical Reportsare not correct

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Also please refer the below thread for changing time zone.
https://supportforums.cisco.com/thread/2145833?tstart=0
Hope it helps.
Anand
Pls rate helpful posts !!

Events booked on icloud show up at different times on iphone calander?

The times I book in events on iphone change when I bring them up on icloud.. or if booked in on icloud show up in a different time on iphone. usually a few hours different but sometimes around day either side of when the event was actually booked for... can this be fixed?
Thanks in advance
Nick Parkin

Welcome to the Apple Community.
Check that the time zone is set correctly on each device.

ICals on OS X & iOS display different time for same event

I am in UTC+8 time zone. My boss is in UTC-5 time zone. I have set up sync service on my MBA and iPhone iCals with my company's MS Exchange Server.
I have a weekly meeting invitation from my boss, my MBA iCal displays this meeting on 10:30pm which is wrong, while my iPhone and MS Server displays 9:30pm which is corret - the meeting takes places on 9:30pm my time.
All my other iCal events are fine on both devices, only this weekly event displays different time. I have taken with MBA and iPhone to travel around the world over the past half year and switched time zones on them, but they are all set to adjust time zones automatically, and they are with most up-to-date system. Why does MBA iCal displays wrong time? Can I adjust it? This problem exisits on Lion and now also on M Lion.
Thanks for everyone's attention and help in advance!

Try using floating time zones. It helped for me.

Different times showing for an event

Similar Messages

Maybe you are looking for