Different tp r3trans versions in kernel upgrade phase
Hi,
we're actually in an kernel upgrade phase (R/3 6.40 from 175 to 196). The new kernel version will be deployed first on DEV system, and after evaluation/troubleshooting the PRD will be done. The tp and r3trans programs are also upgraded.
My question is the following : is it possible to do transports from DEV to PRD when you're working with different tp and r3trans versions (during the upgrade phase) ?
Kind regards,
Erik
Hi Erik,
There is no problem if you transport,we have recently changed the tp and r3trans in our DEV and have done many transport everthing worked fine,no problems.You can proceed.
Make sure you back up the sys/exe directory.
Reward points if helpfull.
Regards,
Vamshi.
Similar Messages
-
Dp lib version mismatch-After kernel upgrade
Hi All,
After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
Full qualified hostname = XXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 00:33:37 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
XXXXXXXXX:ts2adm 30% pg sapcpe.log
================ >>> main =======================
INFO: sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
=================================================
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
=================================================
Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2008/10/20 00:33:34
ERROR: can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
Mon Oct 20 00:50:19 2008
ERROR => gateway (pid 24413) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
please help in solving this problem
Thanks
Giridhar
Edited by: giridhar n on Oct 20, 2008 12:47 PMHi,
We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
Error Log
(XXXXXXXXX is the hostname)
Dev_W1:
XXXXXXXXX:ts2adm 9% more dev_w1.old
trc file: "dev_w1", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 01
M sid TS2
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 162
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 3867
M
M
M Mon Oct 20 03:59:26 2008
M kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c 1281]
M ThInit: running on host XXXXXXXXX
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C
C Mon Oct 20 03:59:27 2008
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPTS2's password
C Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Got SAPTS2's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
C Now I'm disconnected from ORACLE
C Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081020 035926 XXXXXXXXX
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I
I Mon Oct 20 03:59:30 2008
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff64c00000, size: 20000768)
M SHM_ROLL_AREA (addr: 0xfffffffe40000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0xfffffffe36000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff7597a000, size: 3715586)
M SHM_PAGING_ADM (addr: 0xffffffff79a00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7a900000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 1 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe2c092088, size: 576)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe2c1553c0, size: 3195648)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe2c4616c0, size: 30740480)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe2e1b6088, size: 576)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe2e2793c0, size: 798912)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe2e33c480, size: 6148096)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe2e91c088, size: 576)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe2e9df3c0, size: 798912)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe2eaa2480, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe2ed94088, size: 3072)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe2ee57d80, size: 1997280)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe2f03f760, size: 14580144)
B db_con_shm_ini: WP_ID = 1, WP_CNT = 24, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
I *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c 2782]
I *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c 1359]
I *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c 855]
M *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 5064]
M in_ThErrHandle: 1
M *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10506]
M
M Info for wp 1
M
M pid = 3867
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Saving TBX statistics:
B dbtbxbuf: 0 object entries written.
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c 269]
dev_icm:
trc file: "dev_icm", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 177
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3865
[Thr 1] started security log to file dev_icm_sec
[Thr 1] ICM running on: XXXXXXXXX.saipc.XXX.com
[Thr 1] MtxInit: 30001 0 2
[Thr 1] IcmInit: listening to admin port: 64999
[Thr 1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
[Thr 1]
[Thr 1] * LOCATION ICM runing on host XXXXXXXXX
[Thr 1] * ERROR dp lib version mismatch, please check installation
[Thr 1] *
TIME Mon Oct 20 03:59:28 2008
[Thr 1] * RELEASE 700
[Thr 1] * COMPONENT DP
[Thr 1] * VERSION 241000
[Thr 1] * RC -9999
[Thr 1] * MODULE dpxxtool2_mt.c
[Thr 1] * LINE 688
[Thr 1] * DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
[Thr 1] * COUNTER 3
[Thr 1] *
[Thr 1] *****************************************************************************
[Thr 1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
[Thr 1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
[Thr 1] *** ICM shutdown completed (pid: 3865) ***
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Mon Oct 20 03:59:24 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 145
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3853
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
[Thr 1] 4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsTS2 (3601) ***
[Thr 1] *** I listen to internal port 3901 (3901) ***
[Thr 1] CUSTOMER KEY: >C0395101982<
[Thr 1] Mon Oct 20 04:01:28 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
[Thr 1] Mon Oct 20 04:05:07 2008
[Thr 1] MsSExit: received SIGINT (2)
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
dev_rd:
trc file: "dev_rd", trc level: 1, release: "700"
Mon Oct 20 03:59:26 2008
***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c 1757]
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 176
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3864
gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=700.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Oct 20 03:59:27 2008
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
Full qualified hostname = XXXXXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 03:59:27 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
dev_rfc24:
Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
======> User is locked. Please notify the person responsible
ABAP Programm: SAPLTMSC (Transaction: )
Called function module: TMS_CI_START_SERVICE
User: DDIC (Client: 015)
Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 162
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3854
Mon Oct 20 03:59:25 2008
kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c 1257]
shared lib "dw_xml.so" version 162 successfully loaded
shared lib "dw_xtc.so" version 162 successfully loaded
shared lib "dw_stl.so" version 162 successfully loaded
shared lib "dw_gui.so" version 162 successfully loaded
shared lib "dw_mdm.so" version 162 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >XXXXXXXXX_TS2_01 <
DpShMCreate: sizeof(wp_adm) 42240 (1760)
DpShMCreate: sizeof(tm_adm) 150350080 (30064)
DpShMCreate: sizeof(wp_ca_adm) 31232 (104)
DpShMCreate: sizeof(appc_ca_adm) 208000 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (1000056/862328/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff66000000, size: 153051096)
DpShMCreate: allocated sys_adm at 0xffffffff66000000
DpShMCreate: allocated wp_adm at 0xffffffff66002218
DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
DpShMCreate: allocated tm_adm at 0xffffffff6600c778
DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6f02f488
DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
Mon Oct 20 03:59:26 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4048 MB allocated
<ES> 4047 blocks reserved for free list.
ES initialized.
Mon Oct 20 03:59:31 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1659]
***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c 12153]
DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3866) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3867) exited with exit code 255
ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3868) exited with exit code 255
ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3870) exited with exit code 255
ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3871) exited with exit code 255
ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3872) exited with exit code 255
ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3873) exited with exit code 255
ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3874) exited with exit code 255
ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3875) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3885) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3888) exited with exit code 255
ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3890) exited with exit code 255
ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3902) exited with exit code 255
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 162
Release check o.K.
Mon Oct 20 03:59:51 2008
my types changed after wp death/restart 0xbd --> 0x81
ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3903) exited with exit code 255
ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3904) exited with exit code 255
ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3905) exited with exit code 255
ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3908) exited with exit code 255
ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3911) exited with exit code 255
ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3914) exited with exit code 255
ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3915) exited with exit code 255
ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3916) exited with exit code 255
ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3919) exited with exit code 255
ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3924) exited with exit code 255
Mon Oct 20 04:00:11 2008
ERROR => gateway (pid 3864) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(3869,0) successful -> process alive
killing W3-3869 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 20 08:00:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3866 Ended no 3 0 0
1 DIA 3867 Ended no 3 0 0
2 DIA 3868 Ended no 3 0 0
3 DIA 3869 Run yes 0 0 0
4 DIA 3870 Ended no 3 0 0
5 DIA 3871 Ended no 3 0 0
6 DIA 3872 Ended no 3 0 0
7 DIA 3873 Ended no 3 0 0
8 DIA 3874 Ended no 3 0 0
9 DIA 3875 Ended no 3 0 0
10 UPD 3885 Ended no 3 0 0
11 UPD 3888 Ended no 3 0 0
12 UPD 3890 Ended no 3 0 0
13 UPD 3902 Ended no 3 0 0
14 ENQ 3903 Ended no 2 0 0
15 BTC 3904 Ended no 2 0 0
16 BTC 3905 Ended no 2 0 0
17 BTC 3908 Ended no 2 0 0
18 BTC 3911 Ended no 2 0 0
19 BTC 3914 Ended no 2 0 0
20 BTC 3915 Ended no 2 0 0
21 SPO 3916 Ended no 2 0 0
22 UP2 3919 Ended no 2 0 0
23 UP2 3924 Ended no 2 0 0
Dispatcher Queue Statistics Mon Oct 20 08:00:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
4000
0
0
--------++++--
+
DIA
4
4
4000
4
0
--------++++--
+
UPD
0
0
4000
0
0
--------++++--
+
ENQ
0
0
4000
0
0
--------++++--
+
BTC
0
0
4000
0
0
--------++++--
+
SPO
0
0
4000
0
0
--------++++--
+
UP2
0
0
4000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 2 ( 66%), shm 1 ( 33%)
since last update total 3, udp 2 ( 66%), shm 1 ( 33%)
Dump of tm_adm structure: Mon Oct 20 08:00:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Oct 20 08:00:21 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >XXXXXXXXX_TS2_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
please help me to solve this.
Thanks
Giridhar -
TP version problem during upgrade from 4.7 sr2 to ECC6
Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
#====================================================#
Requests and information for module Initialization #
#====================================================#
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
The R3trans in your active SAP kernel is either older or
the version could not be determined. Call it without
any option to determine the build date.
If the build date is too old, you have to replace it
before you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
INFO: The version check of the disp+work in your active SAP kernel
determined that it has a sufficient level.
No update of disp+work is necessary.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
The tp in your active SAP kernel is either older or the
version could not be determined. Call it without any option
to determine the version.
If the version is too old, you have to replace it before
you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
the ST-PI software component with at least Support Package Level 8
After the update is done, the module must be repeated!
For more information, see the upgrade documentation
INFO: The upgrade strategy for the addon ABA_PLUS
is described in note: 632429
INFO: The upgrade strategy for the addon APPINT
is described in note: 632429
INFO: The upgrade strategy for the addon BP-R3PF
is described in note: 632429
INFO: The upgrade strategy for the addon FINBASIS
is described in note: 438521
INFO: The upgrade strategy for the addon LSO
is described in note: 503468
INFO: The upgrade strategy for the addon LSOFE
is described in note: 503907
INFO: The upgrade strategy for the addon PI
is described in note: 700779
INFO: The upgrade strategy for the addon PI_BASIS
is described in note: 555060
INFO: The upgrade strategy for the addon SLL_PI
is described in note: 1306751
INFO: The upgrade strategy for the addon ST-A/PI
is described in note: 69455
INFO: The upgrade strategy for the addon ST-PI
is described in note: 539977
INFO: The upgrade strategy for the addon WP-PI
is described in note: 632429
#===========================================================#
PREPARE module Initialization finished with status failed #
#===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
ManiHi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia -
Error during the upgrade phase "start_shdi_first"
Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=de4
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid DE4
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01 <
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c 1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724] 1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724] 2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c 1694]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
VadiDear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies. -
Dear Experts,
We are having one unique problem , We having one BWP server CI install on AIX + Oracle 9i, and one application server on windows application server(the server resided on diffrnt windows domain) , But now since we have installed these systems . while kernel upgrade we have forgotten to upgrade the kernel level of application server. Hence the kernel got differed.
Now we have ci installed on kernel level 196 and Kernel level of app. server is 22 . and we have tried to upgrade it to 196 but instance is not getting up after copying kernel pacth.
Kindly suggest what to do, I am sending the Devloper trace at the time we have tried to upgrade the kernel level.
Regards
Yogesh
The trace is as followed
trc file: "dev_disp", trc level: 1, release: "640"
Sun Jul 06 21:52:39 2008
kernel runs with dp version 136(ext=102) (@(#) DPLIB-INT-VERSION-136)
length of sys_adm_ext is 312 bytes
sysno 01
sid BWP
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 196
intno 20020600
make: multithreaded, ASCII
pid 4552
Sun Jul 06 21:52:40 2008
***LOG Q00=> DpSapEnvInit, DPStart (01 4552) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 196 successfully loaded
shared lib "dw_xtc.dll" version 196 successfully loaded
shared lib "dw_stl.dll" version 196 successfully loaded
shared lib "dw_gui.dll" version 196 successfully loaded
shared lib "dw_mdm.dll" version 196 successfully loaded
Sun Jul 06 21:52:42 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0232.qqq.nxst) took 2 seconds
Sun Jul 06 21:52:47 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3881]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >bw1_BWP_01 <
DpShMCreate: sizeof(wp_adm) 6656 (832)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 064F0040, size: 2665488)
DpShMCreate: allocated sys_adm at 064F0040
DpShMCreate: allocated wp_adm at 064F17D8
DpShMCreate: allocated tm_adm_list at 064F31D8
DpShMCreate: allocated tm_adm at 064F3200
DpShMCreate: allocated wp_ca_adm at 06738240
DpShMCreate: allocated appc_ca_adm at 0673C890
DpShMCreate: allocated comm_adm_list at 0673E000
DpShMCreate: allocated comm_adm at 0673E018
DpShMCreate: allocated vmc_adm_list at 0676CE18
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0676CE40
DpShMCreate: allocated wall_adm at 0676CE48
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2546 blocks reserved for free list.
ES initialized.
Sun Jul 06 21:52:48 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( mdbiwprd) [dpxxdisp.c 10113]
DpStartStopMsg: send start message (myname is >bw1_BWP_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => platform patchno is 21 [dpxxdisp.c 14975]
ERROR => but my patchno is 196 [dpxxdisp.c 14976]
DP_FATAL_ERROR => Release inconsistent with running system
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-9124 (SIGUSR2)
killing W1-3092 (SIGUSR2)
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-9796 (SIGUSR2)
ERROR => DpWpKill(9796, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-6252 (SIGUSR2)
ERROR => DpWpKill(6252, SIGUSR2) failed [dpxxtool.c 2508]
killing W4-10008 (SIGUSR2)
ERROR => DpWpKill(10008, SIGUSR2) failed [dpxxtool.c 2508]
killing W5-4008 (SIGUSR2)
ERROR => DpWpKill(4008, SIGUSR2) failed [dpxxtool.c 2508]
killing W6-9768 (SIGUSR2)
ERROR => DpWpKill(9768, SIGUSR2) failed [dpxxtool.c 2508]
killing W7-9976 (SIGUSR2)
ERROR => DpWpKill(9976, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:52:58 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Sun Jul 06 16:22:58 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 9124 Run no 0 4 0
1 DIA 3092 Run no 0 0 0
2 DIA 9796 Run no 0 4 0
3 DIA 6252 Run no 0 4 0
4 DIA 10008 Run no 0 4 0
5 DIA 4008 Run no 0 4 0
6 DIA 9768 Run no 0 4 0
7 DIA 9976 Run no 0 4 0
Dispatcher Queue Statistics Sun Jul 06 16:22:58 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
5
5
2000
5
0
--------++++--
+
DIA
2
2
2000
2
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 9
wake_evt_udp_now 1
wake events total 7, udp 1 ( 14%), shm 6 ( 85%)
since last update total 7, udp 1 ( 14%), shm 6 ( 85%)
Dump of tm_adm structure: Sun Jul 06 16:22:58 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Jul 06 16:22:58 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:03 2008
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >bw1_BWP_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
Stop work processes...
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:04 2008
NiISelect: TIMEOUT occured (1000 ms)
wait for end of exclusive shutdown
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:05 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
wait for end of exclusive shutdown
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:06 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
wait for end of exclusive shutdown
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:07 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
wait for end of exclusive shutdown
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:08 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
wait for end of exclusive shutdown
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:09 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
wait for end of exclusive shutdown
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
[DpWpDied] W3 lives (PID:6252 HANDLE:384)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
[DpWpDied] W5 lives (PID:4008 HANDLE:376)
[DpWpDied] W6 lives (PID:9768 HANDLE:372)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
DpTestAndSetSoftCancel: set soft cancel for T0/M0
SoftCancel request for T0 U1 M0 received from DISPATCHER
DpHdlSoftCancel: T0 M0 running in W0 status 4
DpHdlSoftCancel: set CONTROL_SOFT_CANCEL
switch on control 0x20000 for W0 (0x0 -> 0x20000)
DpInsertSchedule: inserted slot 8 (DPT_SOFT_CANCEL:next schedule 1215361394 (total 9))
DpHdlSoftCancel: interrupt W0
killing W0-9124 (SOFT_CANCEL_KILL)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
DpTestAndSetSoftCancel: set soft cancel for T1/M0
SoftCancel request for T1 U2 M0 received from DISPATCHER
DpHdlSoftCancel: T1 M0 running in W1 status 4
DpHdlSoftCancel: set CONTROL_SOFT_CANCEL
switch on control 0x20000 for W1 (0x0 -> 0x20000)
DpInsertSchedule: inserted slot 9 (DPT_SOFT_CANCEL:next schedule 1215361394 (total 10))
DpHdlSoftCancel: interrupt W1
killing W1-3092 (SOFT_CANCEL_KILL)
[DpWpDied] W2 lives (PID:9796 HANDLE:388)
DpTestAndSetSoftCancel: set soft cancel for T2/M0
SoftCancel request for T2 U3 M0 received from DISPATCHER
DpHdlSoftCancel: T2 M0 running in W2 status 4
DpHdlSoftCancel: set CONTROL_SOFT_CANCEL
switch on control 0x20000 for W2 (0x0 -> 0x20000)
DpInsertSchedule: inserted slot 10 (DPT_SOFT_CANCEL:next schedule 1215361394 (total 11))
DpHdlSoftCancel: interrupt W2
killing W2-9796 (SOFT_CANCEL_KILL)
[DpWpDied] W4 lives (PID:10008 HANDLE:380)
DpTestAndSetSoftCancel: set soft cancel for T4/M0
SoftCancel request for T4 U5 M0 received from DISPATCHER
DpHdlSoftCancel: T4 M0 running in W4 status 4
DpHdlSoftCancel: set CONTROL_SOFT_CANCEL
switch on control 0x20000 for W4 (0x0 -> 0x20000)
DpInsertSchedule: inserted slot 11 (DPT_SOFT_CANCEL:next schedule 1215361394 (total 12))
DpHdlSoftCancel: interrupt W4
killing W4-10008 (SOFT_CANCEL_KILL)
[DpWpDied] W7 lives (PID:9976 HANDLE:368)
DpTestAndSetSoftCancel: set soft cancel for T7/M0
SoftCancel request for T7 U8 M0 received from DISPATCHER
DpHdlSoftCancel: T7 M0 running in W7 status 4
DpHdlSoftCancel: set CONTROL_SOFT_CANCEL
switch on control 0x20000 for W7 (0x0 -> 0x20000)
DpInsertSchedule: inserted slot 12 (DPT_SOFT_CANCEL:next schedule 1215361394 (total 13))
DpHdlSoftCancel: interrupt W7
killing W7-9976 (SOFT_CANCEL_KILL)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:10 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 lives (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:11 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:12 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:13 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:14 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:15 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:16 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:17 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:18 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:19 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:20 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:21 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:22 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:23 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:24 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:25 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:26 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:27 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:28 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:29 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:30 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:31 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:32 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:33 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:34 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:35 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:36 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:37 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:38 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:39 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:40 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:41 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:42 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:43 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:44 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:45 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:46 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:47 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:48 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:49 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:50 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:51 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:52 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:53 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:55 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:56 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:57 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:58 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:53:59 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:00 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:01 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:02 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:03 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:04 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:05 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:06 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:07 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:08 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
wait for end of cancel
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:09 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
killing W1-3092 (SOFT_KILL)
Stop gateway
killing process (9548) (SOFT_KILL)
Stop icman
killing process (7716) (SOFT_KILL)
Terminate gui connections
[DpWpDied] W0 died (PID:9124 HANDLE:396)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 died (PID:9796 HANDLE:388)
[DpWpDied] W3 died (PID:6252 HANDLE:384)
[DpWpDied] W4 died (PID:10008 HANDLE:380)
[DpWpDied] W5 died (PID:4008 HANDLE:376)
[DpWpDied] W6 died (PID:9768 HANDLE:372)
[DpWpDied] W7 died (PID:9976 HANDLE:368)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:10 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:11 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:12 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:13 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:14 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:15 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:16 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:17 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:18 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:19 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:20 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:21 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:22 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:23 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:24 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:25 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:26 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:27 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:28 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:29 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:30 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:31 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:32 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:33 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:34 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:35 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:36 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:37 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:38 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:39 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:40 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpWpDied] W0 handle not set (PID:9124)
[DpWpDied] W1 lives (PID:3092 HANDLE:392)
[DpWpDied] W2 handle not set (PID:9796)
[DpWpDied] W3 handle not set (PID:6252)
[DpWpDied] W4 handle not set (PID:10008)
[DpWpDied] W5 handle not set (PID:4008)
[DpWpDied] W6 handle not set (PID:9768)
[DpWpDied] W7 handle not set (PID:9976)
waiting for termination of work processes
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Jul 06 21:54:41 2008Hi,
don't upgrade kernel on windows server.
stop application server.
copy kernel of windows on AIX machine under \sapmnt\<SID>\SYS\exe\uc\NtI386
start application server.
if still fails then do following
delete the old patch number in the message server status area
which previously contained the old patch level:
- Transaction SMLG
- Goto -> System Diagnosis -> Message server status area
- delete old patch level of dialog instance.
restart application server.
regards,
kaushal
Edited by: Kaushal Malavia on Jul 9, 2008 11:57 AM -
Hi Gurus,
I have questions regarding kernel upgarade. I have downloaded db dependent and independent .sar files and put it in new folder outside the directory usr/sap/SID/sys/exe/uc. Now my questions:
1. Is it ok to uncar .sar files in my own directory?
2. After unpacking .sar files, do i need to transfer the files to the directory usr/sap/SID/sys/exe/uc?
I need your expert opinion on this since this is the first time I do kernel upgrade. If anyone happens to have document on kernel upgrade in Windows, much appreciated.
Regards,
Eleazar4 ETW000 r3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.03.2010 - 18:41:56
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Mar 02 18:41:57 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 00000001887A0000
4 ETW000 44134 0.044134
4 ETW000 [dev trc ,00000] using "E:\usr\sap\BPF\SYS\exe\uc\NTAMD64\dboraslib.dll" 11 0.044145
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 13 0.044158
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll 15 0.044173
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.234) 208 0.044381
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll 12 0.044393
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll 21 0.044414
4 ETW000 [dev trc ,00000] New connection 0 created 21 0.044435
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 35 0.044470
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 17 0.044487
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 11 0.044498
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 28 0.044526
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or 206 0.044732
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 [dev trc ,00000] -->oci_init1 33 0.044765
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 11245 0.056010
4 ETW000 [dev trc ,00000] Default connection: tnsname ='BPF' 24 0.056034
4 ETW000 [dev trc ,00000] -->oci_initialize(con_hdl=0, char='', nchar='') 15 0.056049
4 ETW000 [dev trc ,00000] application info callback registered 12 0.056061
4 ETW000 [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 1598 0.057659
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrHp=0000000000316200)
4 ETW000 103 0.057762
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrBt=000000000032A9C8)
4 ETW000 28 0.057790
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 149 0.057939
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
4 ETW000 21 0.057960
4 ETW000 [dev trc ,00000] charset='', chset='UTF8', UNI_ASC=FALSE/FALSE 12 0.057972
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 12 0.057984
4 ETW000 [dev trc ,00000] Connecting as /@BPF on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 22 0.058006
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 22 0.058028
4 ETW000 [dev trc ,00000] 0 UTF8 000000000030DFD0 0000000000316200 000000000032A9C8
4 ETW000 22 0.058050
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 25 0.058075
4 ETW000 [dev trc ,00000] Allocating server context handle 16 0.058091
4 ETW000 [dev trc ,00000] Attaching to DB Server BPF (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 37 0.058128
4 ETW000 [dev trc ,00000] Assigning server context 00000000096DC0E8 to service context 000000000032A888
4 ETW000 132293 0.190421
4 ETW000 [dev trc ,00000] Allocating user session handle 33 0.190454
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=000000000032A888, srvhp=00000000096DC0E8, usrhp=0000000009770C70)
4 ETW000 47 0.190501
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 30256 0.220757
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1033: 70 0.220827
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 24 0.220851
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000096DC0E8) 14 0.220865
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 21 0.220886
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000096DC0E8 from con_hdl=0 315 0.221201
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033' 44 0.221245
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1033 16 0.221261
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1033) 14 0.221275
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1033 51 0.221326
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 23 0.221349
4 ETW000 [dev trc ,00000] Try to connect with default password 13 0.221362
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@BPF on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 19 0.221381
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 20 0.221401
4 ETW000 [dev trc ,00000] 0 UTF8 000000000030DFD0 0000000000316200 000000000032A9C8
4 ETW000 22 0.221423
4 ETW000 [dev trc ,00000] Allocating server context handle 12 0.221435
4 ETW000 [dev trc ,00000] Attaching to DB Server BPF (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 31 0.221466
4 ETW000 [dev trc ,00000] Assigning server context 00000000096DC0E8 to service context 000000000032A888
4 ETW000 9132 0.230598
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0, usrhp=0000000009770C70
4 ETW000 25 0.230623
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0, usrhp=0000000009770C70
4 ETW000 28 0.230651
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=000000000032A888, srvhp=00000000096DC0E8, usrhp=0000000009770C70)
4 ETW000 111 0.230762
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 27312 0.258074
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1033: 54 0.258128
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 22 0.258150
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000096DC0E8) 13 0.258163
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 18 0.258181
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000096DC0E8 from con_hdl=0 261 0.258442
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033' 28 0.258470
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1033 12 0.258482
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1033) 12 0.258494
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1033 44 0.258538
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 30 0.258568
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 1033 performing CON [dblink#8 @ 433] 43 0.258611
4 ETW000 [dblink ,00433] ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress [dblink#8 @ 433]
4 ETW000 19 0.258630
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BPF'" -
Kernel upgrade on window system 32-bit
Hi team,
I have installed ECC6.0 on my windows32-bit system, now the present kernel level is 75.
I need to do kernel upgrade, i had ABAP+JAVA instance, Can u tell me the procedure or any is it normal we do for ECC5.0 having only ABAP instance.
So please be specific in the replies,
Your replies are very helpful.
Regards
Bhaskar.TOn your sytem
1. -> get your DB information form typing R3trans -v or from the
R3 level system status. Note down your DB like Oracle or
MSSQL.
2. -> go to SMP and download the appropriate kernel by going
checking 32-64 bit and unicode and non-unicode.
3. -> go to DataBase independant and download
SAPEXE<version>.SAR
4. -> got to DataBase dependant and download
SAPEXEDB<version>.SAR
5. -> for safer side make a backup copy of your existing kernel
with the date and version info.
6. -> Shutdown your SAP (NOT YOUR OS). if you have
application server bring them down first and then Central
Instance.
7.-> now extract this two new .SAR file into your existing
kernel or to any new folder by typing
SAPCAR -xvf SAPEXE***.SAR and SAPEXEDB***.SAR
8. -> if you have extracted the files at some other location that
copy them to your existing location.
9. -> if you are using linux than it is good to do
cleanipc <instance no> remove command, on windows
it is not required.
10.-> Start your Central Instance. type dpmon to find out the
system status. Once the sytem is up start your
Application server also.
11.-> You can check your new kernel version from OS level by
typing disp+work or from the R3 level by going in to
Syste-> Status..
V... -
Respected Gurus
I have planned to upgrade my system kernel to the latest Pck lvl.
What is the latest version for kernel in ECC 6.0.
Also, my kernel Pck lvl is 146, so should i upadate the intermediate Kernel Pck lvl along with the Basis and abap support packs and finally reach the latest Kernel Pck lvl.
Please suggest me.Thank you Bhudev,
i uncar the 159 patch at a different directory other than the kernel directory.
But, i am trying to uncar the same file once again, as error occurred during previous upgrade.
Sapcpe is not starting. But i am safe and the system is up as i had the backup, as per suggestion provided by u and other guru's.
I found that dbghelp.dll should be deleted.
Let me try and revert back to you.
Please try in some other angle, as i am not sure whether this will work out.
Regards,
Daya -
SEVERE ERROR in Upgrade Phase ADDON_SPEC2
I`m trying to upgrade R/3 Release 4.6C to SAP ECC 6.0 SR3 (7.0) Abap:
Unix - Oracle.
I found no errors in log files.
I have successfully completed all the PREPARE PHASES.
Source System:
SAP release: R/3 Release 4.6C
DB version: 10.2.0.2
S.O. version: HP-UX B.11.23 U ia64
Kernel: 46D_Ext
Target System:
SAP release: ECC 6.0 R/3 (7.0)
DB version: 10.2.0.2
S.O. version: HP-UX B.11.23 U ia64
Please help,
Regards,
Erickmore SAPup.log
UPGRADEPHASE ADDON_SPEC2
...started at 20090219124818
Phase log file: 'ADDONSPEC2.LOG'
..finished at 20090219124818 with SEVERE ERROR(S).
...begin dialogue at 20090219124818
...end dialogue at 20090219135001
..answered at 20090219135001.
-> decided to exit.
more ADDONSPEC2.SAV
#---- MASKING file ADDONSPEC2.LOG from /usr/sap/put/log
#---- TIME: 20090219124818
1 ETQ201XEntering upgrade-phase "ADDON_SPEC2" ("20090218183020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSP1
4 ETQ399 auth_shadow_upgrade=0
ADDONSPEC2.SAV: END
more ADDONSPEC2.LOG
1 ETQ201XEntering upgrade-phase "ADDON_SPEC2" ("20090219124818")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSP1
4 ETQ399 auth_shadow_upgrade=0
Some idea,
Erick -
Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors
Hi ,
Need some assistance. Logged message with SAP AG, still waiting for response.Anyone that can assist will be appreciated. Error from logs.
/usr/sap/put/log# more SEDCORG.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_ALI_ORG" ("20061108125644")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT_NEW"
4 ETQ381 request "TP_EXECDBSCRIPT_NEW" means "execdbscript with 46A feature"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ276 Executing SQL-script "ALORDC.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/exe
4 ETQ399 ext. env.: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131
/jre/bin:/usr/java131/jre/bin/classic
4 ETQ399 2006/11/08 12:56:44: put_execute: (tp) forkpid:97258
2EETQ278 Errors during execution of SQL-script "ALORDC.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors ("20061108125645")
Checked TPSQLSTD.OUT log
/usr/sap/put/log# more TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 97258 at 20061108125644
ENV <0x2ff22d14>: dbms_type=ORA
ENV <0x2ff22d22>: dbs_ora_tnsname=BB1
ENV <0x2011c290>: dbs_ora_schema=SAPR3
ENV <0x2ff22d4b>: ORACLE_PSRV=BB1
ENV <0x2ff22d5b>: ORACLE_SID=BB1
ENV <0x2ff22d75>: ORACLE_HOME=/oracle/BB1/102_64
ENV <0x2ff22d94>: ORACLE_BASE=/oracle
ENV <0x2ff22da8>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0x2ff22ddf>: NLS_LANG=AMERICAN_AMERICA.US7ASCII
ENV <0x20147368>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x2014864c>: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131/j
re/bin:/usr/java131/jre/bin/classic
ENV <0x2011be90>: auth_shadow_upgrade=1
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 370.00.09 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
2EETP000 sap_dext called with msgnr "2":
2EETP000 -
db call info -
2EETP000 function: db_ntab
2EETP000 fcode: NT_RDTDESCR
2EETP000 tabname: TADIR
2EETP000 len: 5
2EETP000 key: TADIR
2EETP000 retcode: 2
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 97258
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0200
tp finished with return code: 200
meaning:
ERROR: see tp's stdout (Standard Out may not be available)
Process with ID 97258 terminated with status 200
History : Original problem was related to environment variables for DIR_LIBRARY. Resolved that issue; UaGui was started as root and not the <sid>adm user. UaServer was started as correct user. Killed session and logged on as <sid>adm restarted UaGui as the correct user. Now this error comes up, SAPup won't allow me continue or retry
Replaced tp, r3trans and SAPup tools. Also when I run the cmd /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL in a seperate session, it completes successfully and creates the necessary views as described in ALORDC.XQL. I checked the ALORDC.LOG to confirm this.
Kind Regards,
Ricky PadayacheeHi John,
The problem I had was wrong environment when starting the Uagui and Uaserver, must be started as adm user. I also restarted the installation from scratch...
I had an issue with a duplicate database object, SVERS in my case. I dropped the object not required and restarted phase, went through fine.
Let me know, how it goes.
Regards,
Ricky -
After kernel upgrade "file not found"
I upgraded to kernel version 3 and I rebooted but I didn't do anything in menu.lst, because I thought symlinks would work, so I rebooted but it didn't work. I tried to boot changing names in grub menu but I'm always getting same error "file not found" and I don't know what else to do. I can see the vmlinuz-linux but I can't see initramfs-linux file in /boot from a Live CD. Can you share your menu.lst to try them please.
tbuitenh wrote:
I ran into the same problem. I bookmarked this thread earlier, sorry if the problem has been solved in another one and I didn't notice it.
After putting back the kernel and ramdisk from a backup (using different filenames) and downgrading the kernel (mkinitcpio doesn't work, that's why I had to take the ramdisk from a backup), I was able to get back into my system.
I found a mkinitcpio.conf.pacnew, but no significant changes in there. Applied them anyway.
So let's try that again...
sudo pacman -Syu
(3/5) installing linux [######################] 100%
>>> Updating module dependencies. Please wait ...
/tmp/alpm_kwQ6VA/.INSTALL: line 10: depmod: command not found
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
/tmp/alpm_kwQ6VA/.INSTALL: line 12: mkinitcpio: command not found
Optional dependencies for linux
crda: to set the correct wireless channels of your country
That doesn't look healthy. Perhaps a path problem?
[tb@progress ~]$ su -
Password:
[root@progress ~]# pacman -S linux
warning: linux-3.0.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.0.1-1
Total Download Size: 0.00 MB
Total Installed Size: 54.55 MB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading linux [######################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [autodetect]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux.img
6472 blocks
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
13946 blocks
==> Image generation successful
[root@progress ~]# ls -l /boot
total 12484
drwxr-xr-x 2 root root 4096 Aug 15 12:18 grub
-rw-r--r-- 1 root root 5216044 Aug 15 12:41 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 1460104 Aug 15 12:41 initramfs-linux.img
drwxr-xr-x 2 root root 4096 Jan 26 2011 memtest86+
-rw-r--r-- 1 root root 1453292 Jul 11 19:22 offmylawn.img
-rw-r--r-- 1 root root 2333056 Aug 6 16:22 vmlinuz-linux
-rw-r--r-- 1 root root 2305152 Jul 9 15:00 vmlinuz-offmylawn
That's better. I'll reboot now and see what happens.
@tbuitenh: I encountered this same situation today when I tried to update linux-ck-corei7 from 3.0.4-1 to 3.0.4-2. Like you, running pacman after "su -" (instead of "su") permitted me to complete the update.
I figure this has to do with default login path, right? What exactly is going on here, and how can I fix it? I don't normally run pacman this way.
Last edited by dhave (2011-09-22 23:07:53) -
Solution Manager 4.0- Kernel Upgrade(disp+work stops)
Hi,
While doing Kernel Upgrade for Solution manger 4.0 , the disp+work stops.
I have taken the Packs as per my requisite for Windows server X64 bit - Unicode
The files that were taken are :
SAPEXEDB_102-20001356.SAR
SAPEXE_102-20001354.SAR
The services were stopped,the sap was stopped and the exe backup was taken.
Now after uncar of the SAR files,and while starting the services and SAP, the disp+work stops.
The trace file of disp+work has been shown below:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CPS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 756
Fri Aug 10 11:14:07 2007
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 756) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Aug 10 11:14:11 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solmgr_CPS_00 <
DpShMCreate: sizeof(wp_adm) 19136 (1472)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F320050, size: 6274496)
DpShMCreate: allocated sys_adm at 000000000F320050
DpShMCreate: allocated wp_adm at 000000000F321F40
DpShMCreate: allocated tm_adm_list at 000000000F326A00
DpShMCreate: allocated tm_adm at 000000000F326A60
DpShMCreate: allocated wp_ca_adm at 000000000F87A130
DpShMCreate: allocated appc_ca_adm at 000000000F87FEF0
DpShMCreate: allocated comm_adm at 000000000F881E30
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F908AC0
DpShMCreate: allocated gw_adm at 000000000F908B40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F908B70
DpShMCreate: allocated wall_adm at 000000000F908B80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Aug 10 11:14:12 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1904
argv[0] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1061
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CPS
argv[7] = -DSAPMYNAME=solmgr_CPS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( solmgr) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >solmgr_CPS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Aug 10 11:14:13 2007
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Fri Aug 10 11:14:16 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 384
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1067) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Aug 10 11:14:52 2007
ERROR => W0 (pid 1548) died [dpxxdisp.c 14319]
ERROR => W1 (pid 1516) died [dpxxdisp.c 14319]
ERROR => W2 (pid 1944) died [dpxxdisp.c 14319]
ERROR => W3 (pid 1496) died [dpxxdisp.c 14319]
ERROR => W4 (pid 1968) died [dpxxdisp.c 14319]
ERROR => W5 (pid 1964) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2560) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2548) died [dpxxdisp.c 14319]
ERROR => W9 (pid 3052) died [dpxxdisp.c 14319]
ERROR => W10 (pid 1808) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 1792) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:02 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Aug 10 05:45:02 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1548 Ended no 1 0 0
1 DIA 1516 Ended no 1 0 0
2 DIA 1944 Ended no 1 0 0
3 DIA 1496 Ended no 1 0 0
4 DIA 1968 Ended no 1 0 0
5 DIA 1964 Ended no 1 0 0
6 UPD 1980 Ended no 1 0 0
7 ENQ 2560 Ended no 1 0 0
8 BTC 2548 Ended no 1 0 0
9 BTC 3052 Ended no 1 0 0
10 BTC 1808 Ended no 1 0 0
11 SPO 980 Ended no 1 0 0
12 UP2 1792 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 10 05:45:02 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Aug 10 05:45:02 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 10 05:45:02 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:07 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >solmgr_CPS_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1404) (SOFT_KILL)
Stop icman
killing process (848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1404 HANDLE:488)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1404 HANDLE:488)
wait for end of icman
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:848 HANDLE:496)
[DpProcDied] Process died (PID:1904 HANDLE:472)
DpStartStopMsg: send stop message (myname is >solmgr_CPS_00 <)
NiIMyHostName: hostname = 'solmgr'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Aug 10 11:15:20 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11977]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 416 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 416 (pos=3)
SiSelNRemove: removed sock 416
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 416
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 756) [dpxxdisp.c 10334]
Good Bye .....
Could you please help me in resolving this issue ?...
Regards,
Radeesh VHi,
Below is the trace file of dev_ms
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2416] Sat Aug 11 15:23:23 2007
[Thr 2416] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 1252
[Thr 2416] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1252) [msxxserv.c 1824]
[Thr 2416] load acl file = D:\usr\sap\CPS\SYS\global\ms_acl_info.DAT
[Thr 2416] MsGetOwnIpAddr: my host addresses are :
[Thr 2416] 1 : [172.16.82.227] SOLMGR (HOSTNAME)
[Thr 2416] 2 : [127.0.0.1] solmgr (LOCALHOST)
[Thr 2416] Sat Aug 11 15:23:24 2007
[Thr 2416] MsHttpInit: full qualified hostname = solmgr
[Thr 2416] HTTP logging is switch off
[Thr 2416] set HTTP state to LISTEN
[Thr 2416] ms/icf_info_server : deleted
[Thr 2416] *** I listen to port sapmsCPS (3600) ***
[Thr 2416] *** I listen to internal port 3900 (3900) ***
[Thr 2416] *** HTTP port 8100 state LISTEN ***
[Thr 2416] CUSTOMER KEY: >C1198656006<
[Thr 2416] Sat Aug 11 15:23:51 2007
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden) -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
Upgrade-phase "SYIDUP_EXTRACT/PROFREAD" error
We are upgrading SCC system.
While generating stack.xml file from solman 7.1 sp 10, we got error in the verification execution as Cannot recognize installed product instance in lmdb.
We referred the note - 1816146 - Correction of installed software information (CISI.
1. We run the report RLMDB_DOWNLOAD_INST_SOFT_INFO and created .xml file.
2. downloaded SUM sp10
While running SUM tools we got the error the phase "SYIDUP_EXTRACT/PROFREAD" as below.
Attaching files as -
1. All log file from directory 'S:\usr\sap\SCC\SUM\abap\log'
2. All profiles
We analyzed the issue. Error is coming the file PROFREAD.LOG as
1 ETQ201 Entering upgrade-phase "SYIDUP_EXTRACT/PROFREAD" ("20140409192228")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000'
4 ETQ399 Environment variables:
4 ETQ399 auth_shadow_upgrade=<null>
1 ETQ200 Executing actual phase 'SYIDUP_EXTRACT/PROFREAD'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DDICPWD_ONLY'
4 ETQ399 Starting dialog 'Passwords' at 20140409192229.
1 ETQ359 RFC Login to: System="SCC", AsHost="dl5802" Nr="", GwHost="dl5802", GwService="sapgw"
2EETQ231 RFC Login failed
4EETQ399 Dialogue validator 'DDICValidator' failed with 'DDIC password does not work:
RFC login to system SCC ashost dl5802 nr gwhost dl5802 gwservice sapgw failed with code 1 key RFC_COMMUNICATION_FAILURE:
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'dl5802:3300' not reached
TIME Wed Apr 09 19:22:37 2014
RELEASE 721
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3285
DETAIL NiPConnect2: 172.17.206.26:3300
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
4 ETQ399 Repeat dialog since input validation failed.
Please check the same and revert backup.
Thanks,
Kundan Gandhi
9930446697Hi all,
Please check 4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000' in the log mentioned.
Why it is not picking up any value for System-nr = (It should get system no. 40 - as my system no is 40)
Please revert, if any body faced this type of issue.
Thanks,
Kundan Gandhi -
Upgrade-phase "CONFLICT_CHECK" fails with error
Please help, I am trying to run the prepare for our BW 3.5 to BI 7.0 (SR2) upgrade and am running into an error in the CONFLICT_CHECK phase:
Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
INBC9D"
When i ran this in our beta and dev environment I wasn't updating as many support packs and plug in's; and I did not run into this error. Here are the addon's I am updating
Addon current version upgraded version how I am updating
PI_BASIS 2005_1_640 2006_1_700 UPG With ADDON CD
BI_CONT 353 703 UPG WITH SAINT PACK
ST-A/PI 01F_BCO640 - DELETE
ST-PI 2005_1_640 2005_1_700 UPG WITH SAINT PACK
Here is the output file:
more CONFLCHK.LOG
1 ETQ201XEntering upgrade-phase "CONFLICT_CHECK" ("20071011155952")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '30', GwService = 'sapgw30'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPBWS
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
2 ETQ160 Starting conflict check
4 ETQ010 Date & Time: 20071011155952
4 ETQ230 Starting RFC Login to: System = "BWS", GwHost = "sapbws", GwService = "sapgw30"
4 ETQ233 Calling function module "SPDA_CONFLICT_CHECK" by RFC
2 ETQ161 Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
INBC9D"
4 ETQ010 Date & Time: 20071011155952
As you can see it is looking for SAPKINBC9D. This is not an addon package I selected. The PI_BASIS uses SAPKINBC9A. I checked SEPS (EPS admin) and do not see this. I also tried to search for this file on service.sap.com and do not see it. I have no idea what could be causing this. Please help!
ErikaHello,
If I remember correctly it was the version of PI_BASIS. I ended up upgrading the following addon's during the upgrade follows:
PI_BASIS 2005_1_640 2005_1_700 Inst/UPG with STD CD
BI_CONT 353 703 UPG WITH SAINT PACK
ST-A/PI 01F_BCO640 - DELETE
ST-PI 2005_1_640 2005_1_700 UPG WITH SAINT PACK
After the upgrade, I applied the PI_BASIS upgrade and support packs.
Maybe you are looking for
-
when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes
-
When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?
-
What component is included with Microsoft SQL Servers that can be used to perform a broad range of data migration tasks? a. Full Text Search service b. SQL Notification Server c. SQL Reporting Server d. SQL Server Integration Services
-
I want to remove all YAHOO files from my computer. HOW ???
When I launch Firefox, I get a YAHOO search window , and I don't want anything to do with YAHOO -- how do I change it to Google search, like was before I installed Firefox 4 ??
-
I used Firefox on Saturday and then closed it (I thought). When I clicked on it yesterday, it wouldn't come up, not even when I went on Applications and clicked on that icon So I tried downloading it again, but when I went to drag the icon into the a