Different type Optical Networking

Dear All,
i have question,can i do this: "ws-c3560e-12D-E with X2 transceivers direct connect to uplink port (SFP+) on WS-C2960S-24TD-L " ?
At each link Fiber, can we use diffrent type of transceiver? (Example : X2 - SFP+ , GBIC - SFP)
Please give me info,
Thanks & Regards

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Not 100% certain what you're asking. You can have different physical optical modules on the two ends of a link, e.g. SPF on one end, GBIC on the other, but they have to be compatible, e.g. SX to SX. You also need to insure the optical modules are compatible with the actual fiber type and fiber length.

Similar Messages

HH5 and Openreach Optical Network Box

I have just upgraded my Infinity 1 to Infinity 2 and have a new HH5. I have not yet connected it up.
I understand that the HH5 has a built in modem.
The instruction book which came with the HH5 tells me to connect it to my Openreach optical network box.
Is there an advantage to using the HH5 on its own or is it better with the Openreach box, or does it make no difference?
I would prefer a single box solution if possible, for reasons of domestic harmony.
Any advice gratefully received.
Solved!
Go to Solution.

the Openreach optical network box is only used on fibre to home not fibre to cabinet if you are on FTTC then the hub 5 replaces the Openreach modem they are different pieces of equipment
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Media types, optics questions

Hello Experts,
I am a lot confused about the different types of optics and media types. I will try to list some of my confusions:
I think when we say "optics", it means the same thing as transceivers...sfp,sfp+ etc are kind of transceivers, right?
Is media type one of: "copper" or "fiber"?
If copper is the media type, then what transceivers can be put on each side of the cable?
If fiber is the media type, then what optics/transceivers can be put on each side of the cable?
Is it necessary to have same types of optics at each end of the cable?
can a copper cable be connected to an RJ45 port at one end and to a 1000Base-LX/LH on other end? Or is 1000Base-LX/LH is just for fiber and no copper?
I am also confused about what all optics are compatible with each other...for eg, if I want to have some optic at one end, how can I find out what optics are compatible with it and can be used at other end.
What is meant by connector and optics? What is LC/SC connector, SR/LR optics...
Sorry these are beginner questions and may have been answered already. But I could not find any single doc which could have explained things clearly.
So any help is appreciated.

I am also confused about what all optics are compatible with each other...for eg, if I want to have some optic at one end, how can I find out what optics are compatible with it and can be used at other end.
sh int
sh int trans
What is meant by connector and optics? What is LC/SC connector, SR/LR optics...
different sizes. you see it all in google image

Fiber optic network monitoring tool

Dear,
Anybody's know Fiber optic network monitoring tool (Including cable)
Thanks

What do you want to monitor ?
If you want to monitor signal strength and such or do you want to monitor that noone connects to the optical link itself and taps out information, or do you want to monitor traffic flows inside of the link.
or do you want to monitor the cable itself with "special" testequipment.
The First and Third options you can get some stuff out of the switch.
The Second uption there are depending on what type of cabeling and wat speed you are in. Do you want to encrypt the information traveling the links ? if so this can be quite expensive.
The fourth one there are some fiber optics test equipment that tells you of cable faults and types and such.
Those range from about 100$ to 10 000$
good luck

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Mini-DVI to DVI Adapter issues (2 different types, no info from Apple)

as you can see below, I have an iBook G4 1.2GHz
three weeks ago I got a Mini-DVI to Video Adapter
there were two different types in the Apple Store because there are two generations of Mini-DVI outputs, therefore some close inspection and it was easy to get the right part.
Now, three weeks later, all that stuff is off the shelf so it looks like they only have up the more recent size plug. Thus, I cannot find the slightly smaller Mini-DVI to DVI Adapter. (typical Apple, probably just wants me to spend more money on a new machine)
Anyone have a line on where to buy the older type of adapter?
be very careful out there. They are pimping the heck out of the newer generations. I'm looking for the older one.
(if not, I'll probably just stop buying Apple stuff. No need for the headache any more since they are no longer really different products. Just fashion)

I have both an iBook G4 and a MacBook, which use each of the adaptors you have described. I found the information on the Apple site by identifying the Model iBook I had, Dual USB, and looking at he detailed views of each model to identify the type of 'video output port'. I obtained a '2 input' VGA switch from Tiger Direct to be able to switch my monitor from iBook to MacBook.
Hope this helps!

Convert different types of files and merged them into one pdf

Hi, everyone. I'm girl from China.
There is folder containing severl files of different types, like doc, msg, jpeg etc. And I want to convert and merge them into one pdf following a certain order. I know that PDFmaker can do that nicely, but the problem is that I have like 3000+ fodlders that requires the same work.
I want to do it with VBA and Acrobat. I have a Acrobat XI Standard Version and a perfect license, by the way
And I have got the code(Thanks, Karl Heinz Kremer) of merging two pdfs into one, but how can I convert them into pdf first?
Thank you very much.
If I can finish this, I would like to publish my code on this forum.

Wow, that's great news. But how should I add the Action?
1. There is no action named "Covert files into Pdf" in the tools panel....
And if I write Javascript code to do this action. How should I write it?
app.openDoc({
cPath: "/c/temp/myPic.jpg",
bUseConv: true
These code only works when I specify the path of the file.
If you know how, pls tell me..........

How can I get the program to recognize two different types of thermocouples?

I am using a PCI-4351 card with a TBX-68T terminal block. I was having trouble writing and finding a program that would give me more than one reading/sec. I found a program on the NI website called "435x_logger_triggering", and so far it is the only program that I have found that will actually collect data at 60 Hz. Unfortunately, this program only lets you specify one mode for your thermocouples. This is a problem because we are using two thermocouples, one is type K and the other is a type R, so we get bad readings from one of the thermocouples depending on which mode it is set on. I would like to know how I can program in a seperate mode for each channel in this program. Un
fortunately, some of the sub VI's in this program are password protected, so I don't know if this is possible. Everything is entered correctly in the Measurement and Automation explorer, so that isn't the problem. I will attach a copy of the program that I am using. I have modified it slightly from the one I got off the NI website, so that the thermocouple readings have a time stamp and are saved to disk. Any assistance you could give me would be greatly appreciated.
Thanks,
Jordan
Attachments:
Forest_Fire_Thermocouple.vi ‏140 KB
435xlogger_triggering.vi ‏110 KB

Jordan,
You should be able to sample two different thermocouples in the example that ships with the 435x driver called "Getting Started with multiple tranducers Continous". Simply put each type of thermocouple in a different index . Each index of the Transducer Group Array can have a different type and specify the channels that correspond to that type.
One way that you can speed this VI up is to place a wait inside of the while loop. This will reduce the number of times the software polls the card if it has available data(increasing the overhead). I would suggest about 500 ms. The data that you receive will all have the same delta t because the sampling clock is hardware driven not software, so it does matter when the data is polled.
You will not be
able to get 60 samples per second when you are measuring multiple channels anyway. The sample rate for multiple channels is about 9/(# channels). This is explained in the 435x Users Manual.
I looked at your code and noticed that you tried to change some of the enumeration controls. Unfortunately you will not be able to change these because they are password protected on the low level subVIs, which is where they are defined.
The way you select if you want the notch filter is in the 435x Config you specify fast or slow. If it is slow then it will select 10Hz as the nitch filter. If you select fast the it will select either 50 or 60Hz You would then use the function "435x Set power line frequency"
Good luck,
Mike

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

What are the different types of bind that we can use to configure COREid?

Hi
What are the different types of LDAP bind that we can use to configure COREid?
Thanks for your input.

(http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
7.5.2 Creating an LDAP Directory Server Profile

What are the different types of Wage types for Indian Payroll...??

Dear Frnds,
What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
And also please list Info types numbers for different types of TAX and Allowances.
Many thanks in advance.
Regards
Ahmed.

for the list of the wage types you can check V_512W_D for country grouping 40 Inida
for Tax related info please search the forum or search google you will get lot of inputs

What are the different types of exits available?

hi all,
Can any explain different types of exits ? user exit ? menu exit etc?
can anyone explain me each exit with an real time scenario
regds
hari

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits 
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits 
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
Note that you can write any code that satisfy your needs. ****
But in this case, this was wrote as a sample code for reference sake. ****
And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
Regards,
Pavan

What are the different types of parameters available in function builder an

What are the different types of parameters available in function builder and where do we use them.

The different type of parameters available in FM are
Import - They are used to pass the values to the function module.
Export- They are used by FM to pass the result back to the calling program.
Changing - The variables are passed to the FM and can be changed during the FM processing.
Tables - Internal tables can be passed to the FM (it works similar to changing parameter).

What are the different type of projects

i mean how many different type of projects are there in sap implementation..
what do you mean by,
enhancement project
rollout project
development project
support project
is there any thing else other than this?
please clear my doubt.
points would be rewarded.
thank you.

Check the link:
http://help.sap.com/saphelp_sm40/helpdata/en/ba/38c93a37c59122e10000000a114084/content.htm
Implementation Project
Project to implement business processes in an SAP landscape.
Create a project structure from the business processes. You can either create a new project structure, or base it on one of the following:
One or more user or partner templates
An existing project
Scenarios and configuration structures delivered by SAP
An existing production solution landscape
Template Project
A project to create a template.
A template makes your project structure, or parts of it, with its assigned objects (documentation, test cases, IMG activities), available to other projects.
You can lock templates, completely or partially, against changes when they are used in other projects. To use templates in other systems, transport them.
Template projects are especially suited to SAP partner solutions or global rollout.
Upgrade Project
A project to upgrade existing systems.
In an upgrade project you can:
Upgrade customizing: Upgrade existing functions
and/or
Delta customizing: Copy additional functions
Optimization project
A project to optimize the flow of business processes, or the use of a software solution.
You can use optimization projects, for example, in SAP Services.
Safeguarding project
A project to resolve a critical situation in the implementation or use of an SAP solution.
Safeguarding projects show the reasons for a critical situation and coordinate the steps required to resolve the problems.
Maintenance project
A project to maintain a solution
in Change Request Management. The project contains all maintenance activities and urgent corrections of a solution.
in Check-In/Check-Out Business Processes from the Solution Directory
Regards
Edited by: Sravan Prakash.V on Dec 28, 2007 12:25 PM

Different type Optical Networking

Similar Messages

Maybe you are looking for