Different Updates with USB and Bluetooth

When my Nokia 5800xm is connected thru' USB, the OVI Suite informs of 3 updates available... but when I connect thru' Blue tooth it says 7 updates are available..
My device is having the latest software v 52.0.007 and OVI Suite v3.1.0.47 Beta..running on Windows 7 32 bit
Can someone throw some light.. ?
BTW this happened for the first time today..Till now both connections were showing the same updates whenever available.. 
Attachments:
USB.png ‏143 KB
Bluetooth.png ‏138 KB

Reported the issue at Nokia Beta Labs..
But did anyone else face such problem ???

Similar Messages

  • 4s Hotspot tethering only works with USB and BT but not with wifi

    Hi,
    XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan
    Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but when i try to tether with wifi it connects to the laptop at 54mbps and all appears well, even claims to have received a small amount of data packets, but no data comes to any browser. The iPhone reports 1 connection to the hotspot and stays connected with a non-pulsing blue bar after the first minute.
    In the PC i have tried this http://windows.microsoft.com/en-US/windows7/Change-the-order-of-network-protocol -bindings
    I've deleted my firewall (zone alarm) completely and turned off windows firewall to go naked surfing for a second even though they don't cause a problem with USB tethering, makes no difference
    I've deleted the network connection numerous times
    "repaired" connection
    dissabled and enabled the wifi
    turned off the wireless with a hardware switch and on again
    disabled bluetooth
    rebooted many times
    reinstalled itunes (latest)
    loads more things i can't remember
    This is causing me a nightmare. I've been through everything i can find online, been to the Apple store genius bar (genius appeared to have sub zero knowledge / interest as it involved a MS machine), been to a Three shop (legally not allowed to touch my PC apparently) and been to a Sony shop (laptop make, not their fault if my iphone doesn't work). All very frustrating.
    Please help if you can! Any suggestion will be tried unless it involves sledge hammers or lakes, and only then for a few more days at most.

    Turned off bluetooth on phone, turned off hotspot and on again, phone asked if i wanted to turn on bluetooth or go with USB and wifi only, said usb/wifi only. Still nothing. Rebooted PC and iphone. Turned on hotspot, pc seemlessly connects to network, still no data comes.
    One odd thing is zone alarm asks me to "select a security zone for the wireless network at ip address: *******.0" every time and doesn't seem to remember the setting over sessions. When i get the status of the connection the ip address is *****.2 and default gateway is same ********.1 Not sure if that's anything.
    Also getting a javascript error about an undefinded component (trustcheckermozilla) since i updated zonealarm but as i said even completely uninstalling zonealarm made no difference. I'll update firefox as well but tried with IE and still no data.

  • Share information from chip GPS to PC with USB or BLUETOOTH

    Hi!
    I want know if it's possible connect my iphone to my pc with USB or BLUETOOTH, to share information from the gps chip as a tethering mode.

    Hello Sir!
    After weeks of testing, i found the solution of my question. It´s quiet simply!!
    1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
    2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
         "Compartir Conexión desde":   iPhone USB  or  Bluetooth PAN
         "Con otros Ordenadores vía":  Ethernet
    3º Ethernet cable must be connected from Mac mini to Time Capsule !!
    4º In Time Capsule "Internet":  connect by:  DHCP
                                 "Network": bridged
    Nothing more!!!  Sooooo simply!!
    After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
    Also other Devices like IPad, or other iPhone, etc.
    Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
    and it´s working to.
    But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
    In- and Out-Going!
    Thank you for your help, no I made me a "small" TC expert...lol 

  • I have an old iMac and am thinking about getting an iMac intel do I need a different kind of usb and firewire cord?

    I have an old iMac and am thinking of getting an iMac intel. Do I need a different type of usb and firewire cords to work with the new one?

    What type of Firewire cable do you have?
    If our not sure then first look up your computer with the serial number here,
    http://support.apple.com/specs/
    Then take a look at the specs for the new iMac here and see if you have compatible cable,
    http://www.apple.com/imac/specs.html

  • HT4623 I downloaded update with itunes and now all I see is itunes logo and arrow to a plug

    I downloaded an update with itunes and now myiphone is black and only shows itunes logo with an arrow and plug.  no phone tried holding down on off still black  please help I need this phone

    http://support.apple.com/kb/ht1808

  • Problem With WIFI and Bluetooth

    HI Im Vikram
                        Recently i upgraded to IOS 8.1 so problem started with WIFI and Bluetooth . When i was in IOS 7.1.2 everything was fine with my device. so what should i do now ?? Is there any possibility to downgrade to IOS 7.1.2 ??

    Hi Rainxl,
    Unfortunately the BIOS is unable to be resorted to back it up, as the issue persists. I suggest contacting our Technical Support Team for all the information required and to get the details of the nearest Authorized Service Center to get the issue analyzed.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • TS3694 my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)

    my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)

    Hello Amz_Bajwa,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    Best of luck,
    Mario

  • HT204023 Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth  but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi do

    Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth  but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't

    troubleshooting hotspot http://support.apple.com/kb/TS2756

  • Just got an ipadmini. screen stuck with usb and itune motiff image?

    How to unlock ipadmini screen. Stuck with usb and itune image. Tried to turn off with sleep button and home button. No luck

    Your iPad is in recovery mode and you need to restore the device now. Take a look at this kb support article.
    http://support.apple.com/kb/ht1808

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP ENVY 6t has many issues with USB headphone, Bluetooth and more serious issue

    HP ENVY 6t doesn't work with USB headphone, unfortunately. could u let me know how to fix it?
    Bluetooth mouse has been working for a day, it suddenly stopped working. Having checked the PC bluetooth connection, which said "Working properly".   Could you let me know how to re-connect, or re-work?
    "Not complete shut-down" blue screen issue right after receiving the HP PC when I closed display to be in sleep mode.
    I see the "Safe mode" "...." or "Normal mode" screen always.
    The HP PC is not stable UNFORTUNATELY.
    Even if just brand new HP PC, there seems to be many issues.

    I would recommend using this document for your mouse: http://goo.gl/XDRRy
    And using this document to troubleshoot your headphones issue: http://goo.gl/hV9fu
    Most of the time with USB headphones, you have to download the driver from the manufacturer before they will work properly.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Not working USB and Bluetooth GPRS connection with LG KS360 Tribe

    Hello, I just bought an LG KS360 Tribe and I can't use it to connect to the Internet. I also successfully use a Nokia phone with USB connection.
    With the LG phone, when I click on "Connect", it tries to connect to the Internet for a few seconds, then the connection drops. on the phone I can see that 0KB of data have been transfered.
    Bluetooth connection is the same. I use the Generic GPRS/3G driver.
    Please help me with this one...
    Thanks

    Resolved! I've searched for similar problems with generic LG phones. This is what I found: http://www.taniwha.org.uk/
    I've download the zip file http://www.taniwha.org.uk/files/Generic3G2007-02.zip
    (just search for "Generic 3G Scripts" inside the page).
    Then:
    0. Unpack the zip
    1. Copy the "Generic 3G *" scripts in "/Library/Modem Scripts"
    2. Start the Network Manager
    3. Connect the LG KS360 phone using the USB connector
    4. Install the new device
    5. Where you should put the phone number, write the APN address
    6. In user I've inserted "none". Same thing in the password field.
    7. Click on Advanced and select the driver "Other" and "Generic 3G CID1".
    8. Click "OK", "Apply" and "Connect".
    All works for me.

  • How to print directly to printer using USB and Bluetooth from Java (J2ME) app.

    I write mobile phone apps in Java (J2ME). I want to print directly to a printer via USB and via Bluetooth. I cannot use a print job with the Java available to me. Once upon a time you could just send text and print control characters to a printer. I would like to be able to do that again. Alternatively could you provide a 'skeleton' data stream into which I could insert my code to produce what is sent to the printer when a print job is used with Java on a laptop or PC. I just want to sent simple text with a little formatting. 

    Hi,
    As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information.  Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
    I am an HP Employee.

  • Trouble with Vista and Bluetooth

    I'm having an issue with Vista SP2 and Bluetooth. I have Vista Home Premium SP2 running under Boot Camp on a MacBook Pro, and I have an Apple Wireless Mighty Mouse and Apple Wireless Keyboard I need to pair with Windows. I followed the instructions listed in the Boot Camp manual, but Vista won't let me create my own passkey, it just "pairs" the devices for me. When I close the window, the devices do not show up, nor do they function. I called AppleCare support, and have talked with all of who could help me, and they have determined this is an issue with Windows and that I need help from Microsoft. They said I have to enter my own passkey to get it to work, and they do not know why I can't. They're thinking it has something to do with a Windows Update.
    Just wondering what can I do to get these paired up and working. I really need these to work since my MacBook Pro is on a notebook riser and it's awkward to raise up and type and click in such an uncomfortable position.
    Thanks!
    Nathan

    I cannot get the apple wireless keyboard to work with my Mac Pro (Feb-2008 model) under bootcamp and Vista Home Premium 64. I had to upgrade from 10.5.1 in order to use Final Cut Studio 3, so I downloaded and installed OSX 10.5.8 update. Then I ran bootcamp and installed Vista 64. Afterwards, in Vista I inserted the original OSX 10.5.1 DVD and installed the drivers so Vista would recognize the apple hardware.
    I went to pair the wireless mighty mouse and apple keyboard and the instructions say to enter 0000 for the mouse, and enter an 8 digit or larger number for the keyboard. Since the keyboard doesn't work, I couldn't enter anything so I let the system choose a number for the keyboard and let the mouse go without a number. Both show they are connected but only the mouse works. I also tried letting the system generate a number for both but only the mouse works. I tried turning off the mouse but then the system doesn't detect the keyboard at all. For that matter, I don't even like the mighty mouse anyway and prefer to use the mouse with my Wacom tablet so I could do without the mighty mouse if that would somehow help.
    Is there a known issue with 10.5.8 and bluetooth under windows vista 64? What should I do? I must have Vista 64 in order to utilize 3ds Max 2010 and I must have a keyboard to use 3ds Max. Is there a driver I can download to make it work or do I need to buy a generic USB keyboard?
    Thanks in advace for any help with this. I am looking forward to finally getting this Mac all set up.

  • Tethering impact on battery with USB vs Bluetooth

    Assuming an on-the-go scenario with the MBA and an iPhone4, if I want to use tethering which one would be more battery friendly for the MBA: USB or Bluetooth tethering?
    My instinct tells me BT, since the MBA would not be trying to charge the iPhone with the USB cable. But not sure how much power the BT radio uses.
    Thoughts?

    Hi
    Interesting question. I had considered using tethering with my iphone, however in the end I opted for the USB dongle option instead. My main thinking was twofold:
    1) I didn't want to have to be reliant on my iphone being fully charged. Although it rarely happens, I do get caught out sometimes (e.g. when travelling and forgetting the charger cable). With a USB dongle, you don't have to worry about that.
    2) I deliberately selected a USB dongle on a different network to that of my Iphone. If I can't get a good signal on one network, there is a chance I might be fine on the other.
    The other thing to consider is the impact on your iphone battery with tethering. I would imagine the simultaneous data transfer and bluetooth operation would impact the battery charge quite a bit. Has anyone got any experience of this?
    Phil

Maybe you are looking for