Different version of same form

I have 3 different versions of the same form that I need to make into editable PDF's. Each form has the same fields, placed in the same location however the logo and language is different on the PDFs. I have already made one form editable and it was VERY time consuming as there are many fields and check boxes throughout the document.
Is there a way to copy and paste (drag and drop) the editable fields from the completed form to the other 2 versions? Or will I have to create fields in each on individually? The first one took me multiple hours to finish and I am not looking forward to doing that 2 more times.
Any help or suggestions would be greatly appreciated!!!

All you need to do is open the document that has the fields and select "Document > Replace Pages" to update the underlying page contents with pages from a new document that you've created in the other language. Any fields, links, etc. will be retained.

Similar Messages

Multiple NW instances of different versions on same server

Hello,
Our current landscape has two NW 7.2 Java AS instances installed on a single server. This solution works well for us, as one instance functions as our Dev server and the other functions as the QA.
I am looking to upgrade to NW 7.3 EP1. Is it possible to have different NW instances at different versions on the same machine? For instance:
NW 7.2 DEV (port 50000)
NW 7.2 QAS (port 50200)
NW 7.31 PRD (port 50400)
I've already attempted to install NW 7.31 Java as a New and additional installation on the server. Both methods have failed so far. I haven't dug too deeply into the logs yet as I wanted to get feedback from the community first.
In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Thanks,
Greg

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

Installation of different version of same software

Hi everyone,
what is the way to do that? I mean for example:
package-1.0.tgz (depends on other-package-3.tgz)
package-1.1.tgz (depends on other-package-4.tgz)
I want to have both installed. Is there a way?
Thanks for your help.

You can install it to a non standard location, for e.g., your home directory. Of course this won't be possible with official arch packages, you'll have to compile yourself, i suppose.
And of course, there'll be the issue of the same executable name, so you'll have to adjust your $PATH accordingly.
Last edited by x33a (2012-02-04 13:51:01)

2 different versions of NetWeaver CE 7.1 on same computer

Hi experts,
is it possible to install 2 different versions of SAP Netweaver CE 7.1 EHP1 on same computer?
We have installed SAP NetWeaver CE 7.1 EHP1 SP3 with MII 12.1. Now we want to test MII 12.2 (on the same computer) which needs NetWeaver CE 7.1 EHP1 SP5.
Günter

Hi,
Its not a problem. You can install 2 CE systems of different version on same host. Make sure the OS is compatible with both.
Rgds,
Soujanya

Copy values from a filed to another in different blocks in same table

Hi All,
How to copy value from a filed to another field in different blocks in same form ?
example if i change value in Field A of block 1 it should reflect in Field B block 2 and again if i change in Field B block 2 it should reflect in Field A of block 1.
values will change twice or thrice then it will not change. It is happening like that.
how to do this ?
Regards

Same table / different blocks
I guess, both blocks will be marked for update, and when your user presses commit, the same table will be updated twice!
Are you sure that this is what you want to do? Is the same record current in both blocks? If so, you better use 1 block (it can be spread over several canvases and windows) and synchronize the items with the "synchronize item" property.
Anyway: If you can't apply the synchronize-property bcos the items are in different blocks, you can synchronize with 2 when-validate-item triggers.
Wolfram

Needs help to know the different versions of forms with their compatibility

Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
Kindly give the details or any suitable link for the same.
please consider it as on urgent basis.
regards,
rajesh

Rajesh,
the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
Frank

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

Firefox Sync on same computer with different versions of Firefox

Hi,
I know how to use Sync on two different computers and a mobile device, but how can I Sync two or more different versions of Firefox (Nightly, Beta, Aurora, Release Candidate)? I can't get the code from the other computer/firefox because I can only have one version of Firefox open at the same time. I tried it. This is my setup. I have a different Profile for each version of Firefox I have. I also have each version of Firefox installed in a different directory, for example:
Nightly - C:\Program Files\Mozilla Firefox\Nightly\
Aurora - C:\Program Files\Mozilla Firefox\Aurora\
Beta - C:\Program Files\Mozilla Firefox\Beta\
Release Candidate - C:\Program Files\Mozilla Firefox\Release Candidate\
and my Profiles are in my
Nightly - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Nightly\
Aurora - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Aurora\
Beta - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Beta\
Release Candidate - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Release Candidate\
and I run Firefox with the following command (Properties/Target)
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Nightly"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Aurora"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Beta"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Release Candidate"
Can anyone help me so that I can Sync all the accounts (basically, just the bookmarks), so I will have access to all my bookmarks, instead of going to the firefox version I saved it in? I would appreciate any and all assistance concerning this matter.
Thank You.

Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously, but do not use -no-remote with the default browser and the default profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Tools > Options > Sync" or "Firefox > Set Up Sync"
# click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
# click "I Have an Account" : Connect
# click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key)
# click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Different versions of the same app on the app store

Is it possible to let users download the different versions of the same app from the App store,( even though I have not seen it but just wonder whether it is possible) ?
If not then can we have different releases of the same product with different feature set.
This question is applicable for iPhone as well.
Thanks

Wouldn't do you any good, as you need to be a registered developer to use the forum. Just contact one of the developer's of an app you're interested in and ask the developer directly.

Running executables that have been compiled with different versions of a same vi

I am writing a LabVIEW 7 program on Windwos (NT 4.0 up through XP) that will have to simultaneously call and run at least two executable modules. Both of these modules will be written using some of the same utility vis from my user libraries. How can I run the two modules if they have each been compiled using different versions of the utility libraries (i.e. the two executables will have vis with the same name but with slightly different code)?
I know i could dynamically call each vi by reference node, but that can get a bit cumbersome with dozens of vis...

Hi meludwig,
Unfortunately, LabVIEW keeps track of the different VIs in memory using the VI's name. Therefore, if you want to load multiple executables that use the same VIs but with different code, you will want to rename those VIs. LabVIEW cannot distinguish between 2 VIs with the same name but with different code. Dynamically calling the VIs using VI Server, like you mentioned, will also potentially cause problems because the executables might try to load same VI name into LabVIEW memory at a time and this will still causes problems.
My suggestion would therefore to be to rename the utility VIs to another name and save it as a custom subVI in that program. Then, make sure to include that custom subVI in the App Builder executable and you should b
e golden.
Kileen C.
NI

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...

Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene

Different version of same form

Similar Messages

Maybe you are looking for