Different versions Plugin and ActiveX with MSI file installation

Dear all,
we used the newest Adobe Flash Player MSI file with our software deployment tool. But we has trouble with two different versions of plugin and ActiveX installation.
Does any body know how that could be appear? Should we use now the .EXE file?
Best regards,
Marco Schmitt
Freudenberg IT

The EXE and MSI installers on the distribution page are always identical versions.
However, it seems to happen a lot that MSI installers are cached on some corporate servers.  Make sure the caches are cleaned, or download the MSI from outside your corporate environment.

Similar Messages

  • Deploy of 11.4.402.278 version with .MSI file

    After the deploy of 11.4.402.278 version with .MSI file, the Controll panel, falsh 32, tab advanced shows the 11.4.402.278 version.
    in control panel, install e remove application, the  Flash version is  always the preview 11.4.402.267 version.
    So i can't obtain a correct report with SpiceWorks(a scan network software)because the installed version remain the 11.4.402.267.
    If i install Flash 11.4.402.278 manually with the .exe files, in the installed application i find two versions installed and i must remove manually the 11.4.402.267 version.
    Before the 11.4.402.278.msi release everything worked well.
    For the deploy i use the Kaspersky Security Center Consolle.
    Any ideas?

    yes, it is September 17.
    it seems to be an error in the installer written version because the Flash control panel shows the right version.

  • How shall I use my IMac and MacBookPro, with synchronized files

    Hi, how shall I use my IMac and MacBookPro, with synchronized files? I used to work at home and office with those to machines and finally always have different version of my documents. Is there any dispositive that I should use, where all my files are moving with me? os there is something to synchronized the computers using WiFi or bluetooth?

    The following has instructions: OS X Mavericks: Share your Internet connection

  • I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

    I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • What apple software allows me to open and work with excel files?

    What Apple software allows me to open and work with Excel files?

    Numbers, OpenOffice, Microsoft Office 2008 or newer, or similar products. Microsoft Office 2004 doesn't work in 10.7.
    (86805)

  • RPT_MOPZ_COPY_STACK_XML shows SC version differs for JAVA and DUAL-Stack xml files

    Hi All,
    I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. Systems are identical. However, report shows below..
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
    Please help check how to resolve the issue.
    SAP notes mentioned in below KBA were already obsolete. Solution Manager system just upgraded to 7.1 SP11.
    1711612 - RPT_MOPZ_COPY_STACK_XML Report Troubleshooting.
    We would appreciate your response for us to resolve this issue. Thanks.
    Regards,
    Philip

    Hi Jansi, Divyanshu,
    Both system have the same patch levels.
    Here the situation, SYS1 is where we generated the stack xml file. Afterwards, used that stack file to upgrade SYS1.
    Now we built SYS2, ensuring it has the same components version with the un-upgraded version of SYS1, so yes they have same patch number for same components, for this issue, kernel and jvm.
    Thus, instead of running MOPZ for SYS2, we used RPT_MOPZ_COPY_STACK_XML to convert the stack file of SYS1 to be used for SYS2.
    This is where we encountered below messages, when performing the copy.
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    We previously used SOLMAN 7.0 SP23, and the report is working fine there. Then recently, solman was upgraded to 7.1 SP11, and now the report is not working with the above issue.
    We would appreciate if you could share actions on how we can fix the issue.
    Regards,
    Philip

  • Removing, installing or ugrade itune problem and the bonjour.msi file

    Finaly, i got it .
    this is the answer to all problem we the bonjour.msi file
    after 10 days looking to killed this file i yes found from other member that the soft. Revo Uninstall Pro. will removed and uninstall the file and any trace of it , im not expert on soft but was yes a simple scan and them select all and deleted., that work , i was able to install the itunes  and is running again , and the pro. version of the soft. is free for 30 days no need to input cc or any large info. yes visit the webpage http://www.revouninstaller.com/

    If I use the control panel to uninstall ITunes it also asks for a CD-ROM.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Cannot import  and work with the files from Canon 6D and Panasonic GH4

    Thanks for your answer, but it is not really helpful. Perhaps my question was not exactly enough-sorry but my english is not in the best condition. I dont need trials I have some applications and my Intel MAC Pro 2009 is strong enough. For instance Phase One can read my RAW-pictures from my Canon 6D, but no RAW-file from the GH4. Finalcut Pro Vers 7.0.3 no chance to open Movies made with the GH4 and the AVCHD-codec, though the AVCHD-codecs from my old Canon Videocamera works perfect. Even movies with Mpg 4 H 264 are not recognized.  Perhaps I need a special Converter App, for all my Converter Apps like Mpeg streamclip or Flip for MAC cannot read and convert the these files into RS 422.

    Will the DNG files perform the same, meaning will I retain all the information that makes RAW important for processing?
    Yes. That's why DNGs were invented. Adobe has put a lot of work into the DNG format for this very reason.
    Raw files are proprietary and manufacturer specific. Raw formats change with every make and model of camera. Software must be updated for the new Raw format of every single camera. Adobe does an admirable job of upgrading Camera Raw for every new camera.
    DNG is also a Raw format but it's open source and works in any software which can read the DNG format. If camera manufacturers used the DNG format instead of their own Raw format, you would not have to upgrade Elements 10. But they don't, and probably never will, so you must upgrade the Camera Raw plugin (and therefore Elements 10 since it's not compatible with the new Camera Raw) to read the new Raw format from the 6D or add another step to your workflow with conversion to DNG first.
    See
    http://photographylife.com/dng-vs-raw
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • HT2305 I downloaded, and have two .msi files and one setupadmin.exe file. I click the latter and nothing happens?

    I downloaded 2 updates (download only), and there's two  .msi files and one setupadmin.exe file. I click the latter and nothing happens? How am I meant to do install these updates?

    Sorry I forgot to mention I was doing this on a PC with Vista (the heading was Windows so I didn't bother to mention this). Anyway by trial and error I found that you can click on the .msi files to install them. The files were downlads of updates to iTunes and iCloud Control Panel.

  • Sender file adapter, file existence check in archive folder if exists rename the same and proceed with current file

    Dear SAP Gurus
    Interface flow:
    File --> File and RFC.
    We have a requirment where PI needs to check the file existency in archive folder and if there is a file already exists with same name we need to rename that file and archive the current file as is...
    Note* Customer don't want to add time stamp!!!!
    For ex today first message processed with file name "UBMO_delta20140626.xml" and archived as is- UBMO_delta20140626.xml
    and customer sends a second file on the same day with same name(UBMO_delta20140626.xml) in this case before archiving PI needs to check whether there is a file exists already in archive folder or not if there is, then it should rename the same like(UBMO_delta20140626_1.xml) and proceed with current message processing and archive the same name(UBMO_delta20140626.xml).
    Many Thanks in advance...
    Nagesh

    Hi Nagesh,
    I think you can use the feature of run operating system command before message processing. you can refer the below wiki for information.
    SAP XI File Adapter OS Command Line Feature - Process Integration - SCN Wiki
    regards,
    Harish

  • How to maintain different versions of XI mapping in TPZ file ?

    How to maintain different versions of TPZ file ? Does any one have any idea ? Do we create a new software component for an upgraded version of mapping  or just creating a new namespace in the earlier software component would suffice ?
    Thanks,
    Nivedita

    please visit the blog
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview

  • Older CUA version connectivity and functionality with ECC 6.0

    Our current Solution manager box, which is used for CUA, is on Netweaver 04 (sap basis 640 patch 16).  We are in the process of upgrading to ECC 6.0.
    Generally speaking I would recommend having a CUA box at the same level or higher than the child systems.  However I'm would like to know if anyone has experience with a similar version scenario as described above.  If so what issues did you run into and or other items should I be aware.
    Also, ECC has several new system parameters and other password related changes.  Can any of the newer password functionality be used if CUA is still on the older version?
    --B

    have a look at this thread
    Technical upgrade to ERP2005 6.0 and CRM2007 with CUA on 640?
    it should answer both your questions.

  • The FlashPlayer distribution download page still links to old version 14.0.0.176 MSI files

    The download links for Flash Player ver 15.0.0.152 still link to the old version 14 MSI files. Please fix. I'm not sure how else to report this issue.

    Looks like the files are there, so some simple changing of the copied URLs did the trick for me (change 14 to 15):
    download.macromedia.com/...install_flash_player_15_plugin.msi
    download.macromedia.com/...install_flash_player_15_active_x.msi

  • Slow open and save with psb files Photoshop CC

    Here is my system info:
    Mac Pro Early 2009
    Processor  2.66 GHz Quad-Core Intel Xeon
    Memory  32 GB 1066 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5770 1024 MB
    Software  OS X 10.8.4 (12E55)
    Running Photoshop off an SSD 220GB as my bootdisk , and then my scratches are two 1TB Western Digi Caviar Blacks, both at about 60% full, running Big and flat in PS CC prefs,
    Running Photoshop CC 14.0.0
    I'm having very slow open and save times for psb files ranging in size from 2GB to 6GB - slow meaning 5-6 mins
    Does anyone have any suggestions to improve this time?

    I've noticed the same thing with .tif files. It's taking a good minitue or more to save a 15 meg .tif. Very annoying. I opened PS4 and converted the same .jpg to a .tif and saved it in the same location and it took about 4 seconds. Something is totally jacked with saving files in CC.
    Checked the compression settings and the are the same in both. Not a big fan of CC everything is slower. I pay monthly now to work slower?!? May have to go back to CS4.

  • %SOURCE_PATH% and path to MSI files

    Hi.
    I have edited the path to a MSI file - and entered %SOURCE_PATH% - and made
    sure the macro is defined.
    It works fine for the users - but ConsoleOne keeps giving me an error about
    an invalid path to the MSI file. Any tricks to avoid that?
    The distribution and so on works just fine.
    Best regards
    Tue N.

    I can't think of an easy way to fix this in a real good way.
    It may be possible to set the windows variable "souce_path" to the matching
    value.
    It would be annoying as anything to try and work this way but its the best I
    can think of at the moment.
    Craig Wilson
    Novell Product Support Forum Sysop
    Master CNE, MCSE 2003, CCNA
    Editor - http://www.ithowto.com
    (Seeking Full-Time Expert? Drop me a note :> )
    "Tue Nrgaard" <[email protected]> wrote in message
    news:7fwEf.3231$[email protected]..
    >> Hi.
    >>
    >> I have edited the path to a MSI file - and entered %SOURCE_PATH% - and
    >> made sure the macro is defined.
    >>
    >> It works fine for the users - but ConsoleOne keeps giving me an error
    >> about an invalid path to the MSI file. Any tricks to avoid that?
    >>
    >> The distribution and so on works just fine.
    >
    > Just forgot:
    >
    > Zen 4.01 IR6
    > ConsoleOne 1.3.6c
    >
    > The specific error is:
    > Error: Database could not be opened. MSI file could not be found.
    >
    > Anyone?
    >
    > Best regards
    >
    > Tue N
    >

Maybe you are looking for