Different view to develop and library module

Hello everyone, I have a big problem during my workflow, or when working images from the development at the end of the work as the images are like me and very sharp. But when I see in the library module are not sharp and the blacks are very mordibi. Below I post the link to see for yourself.
MODULE DEVELOPMENT:
MODULE LIBRARY:
The problem is that when I export my image is identical to the form LIBRARY and not that beautiful clear form DEVELOPMENT. So I find myself not export images with crisp blacks and dishes.
I already tried to delete the cache, but does not change anything, and I use 1:1 previews, you have no idea how to fix my problem?

twenty_one wrote:
Ah, now I see the rightside of that screenshot, with, as you say, sharpening 150 and NR 0. That's a combo it would never even occur to me to use, not in a hundred years...
Anyway, I tried this with an ISO 1250 shot, but couldn't see any differences anywhere. But maybe you need to go higher.
I've learned to never take anything for granted when reviewing LR forum posts. An ISO 1250 shot is probably too low with most DSLR cameras to see this issue. On my 5D MKII I could really only see the "lightening" between Develop and Library views with ISO 6400 raw images. It may also show up at lower ISO settings with images that are heavily underexposed (i.e. LR Exposure +1 and greater), and with smaller sensor cameras (1.6 crop, P&S).
Gianlu24, keep in mind that Adobe increased the Sharpening amount from '100' in LR3 to '150' in LR4 when using a high 'Masking' setting. For most normal images and Masking settings you should use a Sharpening amount below '100.' There are two basic types–Capture and Output sharpening, each adjusted using separate controls. In addition you can apply both Global and Local Capture Sharpening in LR. These three articles by Laura Shoe may be helpful:
http://laurashoe.com/2011/08/21/sharpening-in-lightroom-part-one-overview-and-capture-shar pening/
http://laurashoe.com/2011/09/27/creative-sharpening-in-lightroom-sharpen-eyes/
http://laurashoe.com/2012/07/11/sharpening-in-lightroom-part-three-output-sharpening/

Similar Messages

Tonal change between develop and library module

After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple? Shooting with a nikon d5100 with ADL turned off as per other similar problems brought up in this forum. Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.

dennis4g1 wrote:
After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple?
Are you using a calibrated/profiled monitor? In Develop module, LR displays in ProPhoto colour space, in Library module it's Adobe RGB. If the monitor doesn't have a proper profile there could be differences in view between Develop and Library. However I would have thought LR would default to assuming monitors behave like sRGB if there's no profile (or no colour space info in the profile).
dennis4g1 wrote:
...Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.
The usual cause for that is that Adobe can't read Nikon proprietary metadata such as Picture control settings. If you shoot with the Nikon Picture Control setting (Standard, Portrait or whatever) at default settings, and if you use the corresponding profile in Lightroom's "Camera Calibration" panel (Camera Standard, Camera Portrait etc) then the appearance should be very close to the out-of-camera jpeg preview appearance.

5d Mark II Images not same in Develop and Library Module

Hello,
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
Please advise what needs to be done to get my images looking how I want them too and holding the adjustments.
thanks
todd bigelow

Sorry, but also noticed that this appears to occur only on the images with higher contrast, beautiful light that is vibrant and saturated. On other images that don't have the same intense, late afternoon colors, the adjustments seem to hold fine.
Meant to say "losing" in original post, not "loosing".......
thanks again for any recommendations

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

On your iPhone ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Date & Time
Switch: Set Automatically ON
No data is lost due to a reset.

Different View for same document library on a Wiki Page

Hi,
I am developing a Provided hosted app which have a functionality to create a document library with two Views. Also we need to show this document library in a wiki page with two different views.
I am using CSOM (C#). I am able to create the document library and the two views programmatically. But when I add the document library in the wiki page the default view (All Documents) is shown for both the web parts. There is an hidden view created with
the WebPartDefinition from the xml provided through code.
Through CSOM we are able make a View as default with the link below.
http://sharepoint.stackexchange.com/questions/90433/add-document-library-xsltlistviewwebpart-using-csom-or-web-services
In my case both the webparts will get the same view, where I need different view for same document library in a wiki page.
Also I tried to update the web parts with the following code.
string viewString = @"<View Name='{0}' MobileView='TRUE' Type='HTML' Url='/SitePages/Home.aspx' Level='1' BaseViewID='1' ContentTypeID='0x' ImageUrl='/_layouts/15/images/dlicon.png?rev=23' >
<Query><Where><Eq><FieldRef Name='KeyDocument'/><Value Type='Boolean'>1</Value></Eq></Where></Query>
<ViewFields><FieldRef Name='FileLeafRef'/><FieldRef Name='DocumentOwner'/><FieldRef Name='Modified'/>
<FieldRef Name='_UIVersionString'/><FieldRef Name='Editor'/></ViewFields>
<RowLimit Paged='TRUE'>30</RowLimit><JSLink>clienttemplates.js</JSLink><XslLink Default='TRUE'>main.xsl</XslLink>
<Toolbar Type='Standard'/></View>";
WebPartDefinition wpd = wpfound.FirstOrDefault();
string formattedstring = String.Format(viewString, wpd.Id);
wpd.WebPart.Properties["XmlDefinition"] = formattedstring;
wpd.SaveWebPartChanges();
web.Context.ExecuteQuery();
I created two views (viewString) as shown above.
The above code did not throw error, but it did not update the web part.
Please advise how to move forward.

Hi Samir,
When we click outside of the list view webpart on a webpart page (or allitems.aspx page) with containing multiple webparts, the list view webpart will lose the focus, and the selected items will be deselected, this is by design.
You can look at the following article with using the approach/workaround of Javascript to prevent the specified list view webpart from losing focus.
http://sharepoint.stackexchange.com/questions/44360/list-view-loses-focus-when-additional-webpart-added-to-page
//Set focus on our list web part
var webPart = document.getElementById('WebPartWPQ1');
WpClick({target: webPart});
//Prevent it from losing focus
SP.Ribbon.WebPartComponent.$3_1.deselectWebPartAndZone = function() { };
Thanks
Daniel Yang
TechNet Community Support

How to populate SNDPRN with different values in Development and Production?

Hello experts,
I have to fill the field SNDPRN in the message mapping with a different value in Development and in Production. As I am new to PI, I used a simple solution - but it is rather ugly: I set a constant value in the mapping in development and a different one in Production. However, I would like to know if there is any solution to have a condition in the mapping like:
IF system is Development, set SNDPRN as Constant1.
IF system is Production, set SNDPRN as Constant2.
(And eventually IF system is Test, set SNDPRN as Constant3)
Thanks in advance for your help,
Luis

Hi Luis,
      You can go with the parameterized mapping , where you can provide different values for SNDPRN in interface determination for development and production.
      At point of time if you want to change the values it requires only a change in the configuration.
      Please refer the below links for reference;
Parameterized Mapping Programs - Enterprise Services Repository - SAP Library
http://scn.sap.com/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
     We are following the same approach for some of our interfaces.
- Muru

Color changes between library/develop and web module

Hi there,
when changing between modules library/develop and web the color of the pictures changes. That means, pictures become darker and the red/orange colors become more intensive. Back to the library, everything is o.k. Webgaleries also change, but not normal exports.
Until yesterday everything worked wonderful, but then I updated from 3.0 to 3.3 and now there´s no more WISYWYG for the webgaleries!
Somedbody out ther who can help?
Thank´s, Tom

First up, Develop is the most current preview. Library previews depend on the preview settings and if they've been zoomed into recently. Web exports sRGB Jpegs and I believe the webcache files that are generated for preview are also. If you're using a Flash Gallery, then there is no colour management happening.
Is your monitor calibrated?

Selecting same photo in film strip and library module

When I select a photo in the library module, the same photo is not selected in my film strip, how do I change this?
The problem is when I select a photo in the library and then click develop, the photo that loads in the develop module is the one I have selected in the film strip, not the one I just clicked on in the library module. In my previous version of LR when I select a photo in the library module the same photo would become selected in the film strip so this problem would never occur, I am trying to find a way to restore this setting.
Also when I click "Ctrl A" in the Library module it selects all photos in my film strip, I would like to select all photos in library module instead so I can click "Sync Settings".
Thanks for your help!

What version of Windows? I'm using Windows 7 with 8 GB RAM, and don't see those problems. I would suggest that you upgrade to the current version, 5.7.1.
Product updates
The other suggestion would be to delete your Lightroom preferences so that Lightroom can generate a new preferences file.
Preference and other file locations in Lightroom 5

LR 3 beta-Beef up develop and print modules

Time is costly and we really need some Photoshop retouching tools where LR is very weak.The CS4 clone tool with opacity adjustment,patch tool,and healing brushes are better than the circular clone tool in LR which cannot deal with irregular shapes.For whatever reason,the LR clone/heal tool slows up LR where it almost freezes when a lot of dust needs to be dealt with whereas CS4 spot healing brush copes well.The curves feature needs to be made more sensitive with points added.
I have not seen the ability to rename files in the develop mode to avoid having to transfer back to the Library module to rename.Also it would be better when making changes to an image in stages, particularly if the image has been sent to Photoshop a few times,if each variation could be clearly marked automatically in the film strip tool bar in the sequence the changes took place.The edit tags currently used get a bit confusing (although renaming the file with a description of the editing carried out does help)
Sharpening is a bit better but a texture enhancer for say clothing or in landscapes- rocks and stone like in third party plugins would be beneficial.The problem is that the masking slider is good at eliminating oversharpening but smoothes out texture too much.
In the Library and develop modules there is no file size or picture dimension information.When exporting from LR,there should be a targeted file size in MB which is required by some users.
Full support for Video files need to be added to process the latest SLR technology.
In the Print module,the abilty to position text with title to the left instead of centred should be possible.Sometimes text might be set out in say ,two or three paragraphs as explanation of the picture without text being centered.This is very difficult to achieve at present.An international copyright symbol (not available on keyboard) should be added as a prefix option for use with the Identity plate (adjustable with the size and opacity slider) to prefix the photographer's name and date.
There appears to be no ability to print to the edge of the paper even at zoom to fill.

Jeff,
Thanks for the clarification and link to Bruce's article. I'm acquainted with the 3 pass approach and am trying to use LR as much as I can without ducking in and out of other applications.
I've heard that LR is good for output of small prints, but for anything intented for the wall, I would be better served by PS or Qimage.
I look forward to LR improving sharpening so that for images that don't need localized adjustments, I can stay in LR. (Did Mark ever give you a commitment for localized adjustments in LR 2.0? I'll have to listen to Podcast #29)
I've always considered sharpening one of the most important parts of the workflow. I'll be taking Mac and John's workshop at the end of June, so I'll get their additonal insight on sharpening.
Reid

Different view in table and screen for field

I need to display EKKN-PS_PSP_PNR in one of my purchasing reports. This is the WBS Element. the problem is it is displayed different on the screen and in the database
for eg: When i extract it from the database it appears as a number, but on the screen when you click on the record, it is a bunch of characters. And it is the characters that I need to display. How to do the conversion. thank you

Hi,
Use
CONVERSION_EXIT_ABPSP_INPUT Conversion External > Internal WBS Element Number
CONVERSION_EXIT_ABPSP_OUTPUT Conversion Internal > External WBS Element Number
routines to convert the data as you see on the screen.
Cheers
VJ

How can I quickly configure & save different views in Develop module?

Is there a method to quicky switch custom views (including my favourite selections for Panels, Toolbars, Window's Bars, and Info Overlay)?
In the "Develop" module, I would like to switch quickly from (1) seeing all panels, etc. to (2) seeing only my image and the right-side panel. There must be a better procedure than what I do now (please don't laugh). I use about six keystrokes as shown below:
(a) turn off top, left-side, and bottom Panels by clicking each individually,
(b) press the "t" key to turn off the Toolbar,
(c) press the "f" key to turn off Window's two top bars and one bottom bar, and
(d) press the [Ctrl-i] key combo to turn off the Info Overlay.
At other times in the "Develop" module, I use about six keystrokes to turn all these hidden objects back on!
I am using "Lightroom 2.5" with Windows Vista Home Premium.
Thanks in advance for your help.

Thank you, johnbeardy, for your suggestion of "Solo Mode". Checking "Help" for "Solo", I discovered the Windows\Screen Mode menu for the 1st time -- it helps. While right-clicking the panels, I also found "Sync with Opposite Panel" which allows me to turn both the top and bottom panels On or Off with only one click. (the LR book that I use doesn't cover these items).
However, I have not yet benefited form "Solo Mode". I turned it On for both left and right panels, but it doesn't appear to make any difference, even after I closed and re-opened LR. Is there something else I need to set to make "Solo" work? Is it applicable for only the left and right panels?

I DELETED SOME OF LIGHTROOM MODULES, ALL BUT DEVELOP AND LIBRARY

Several versions ago, possibly 3.6, I deleted several of the lightroom modules, all but LIBRARY and DEVELOP.
Now I need them all. I have installed 4.4 but the modules have not returned to the top of the LR window.
I cannot remember where I might have stored them on my HD or what their names are, and believe I have reinstalled my system since then anyway.
Is there anyway I can change my preferences, or something, and then reinstall LR so as to get the entire list of modules, such as SLIDESHOW,ETC.
Of course I have my catalog backed up but perhaps this can be done simply.
At the time I had a purpose but now I want the capabilities of the entire program.
thanks,
Vince
Message was edited by: vinsolo

John,
Thank you so much. I was making too big a deal of it. I assume, now, after your answer, that the modules were indeed installed with the update and that I needed only to follow your instructions.
I feared all kinds of unhappy problems.
I AM ALMOST HAPPY!
thanks again,
vince

Ratings Affect Navigation in Develop and Library

Every time I make any "gestures" regarding ratings, be they assigning stars to a file or flagging, navigation is affected.
Say I rate an image at four stars. Lightroom advances the veiw to the next file in the filmstrip.
This navigation issue occurs in both library and develop modules.
How might I remedy this situation?
Thank you.

Do you have SHIFT-LOCK on ?
Turn it off.
Frans

Message types for SAP HR Personnel Development and LMS modules

Hi Friends,
I had a requirement to create ALE's for SAP HR LMS module and Personnel Development module.
So, what are the message types and IDoc s are availble. Earlier replies could be appreciated.
Thanks,
Pavan.

Hi Nayani,
The Message type is HRMD_A for HCM to HCM with basic types HRMD_A01 to HRMD_A07(HRMD_A07 is the latest).
From HCM to Non Hr/CRM/SRM is HRMD_ABA.
Br/Manas

Lightroom 2.1 still crashing on Export in develop and web modules

I am running Lightroom 2.1 on a Windows XP Pro PC with 4GB of Ram, an NVidia graphics card and having found Lightroom 2 an absolute disaster when exporting files with it crashing even when exporting one file, LR2.1 is only slightly better.
I can export around 10 -15 at a time files in the develop module and export slidehows in the web module with up to 30 images or so. Any more and the computer crashes.
Adobe really MUST do something about this as amongst other things I do events and weddings and need to create slideshows for my clients of 100-200 images.
In the meantime any tips!??
Thanks Stefan

You have to report more about what symptoms the crash shows: blue screen, reboot, LR crashes, what does Windows say?
From your description you could have a computer with a hardware problem. Exporting is computationally intensive and taxes the hardware. I can export hundreds of pictures with no problem...
Get a tool like hwmonitor from cpuid.com and monitor your temperatures. And post more detailled symptoms.

Different view to develop and library module

Similar Messages

Maybe you are looking for