Different views in PA20 (Display Personal Data)

Hi,
in our (IDES) system I have seen that different persons could have a different view in PA20 (Display Personal Data).
For example one have a field 'First name' and a field 'Last name' and another have only one field full name.
Could somebody explain this?
Thanks and regards
Patrick

Hi Patric!
This diferences may be exists because of ID of Country Group of this persons. Check if this persons contains the same MOLGA (Country Group).
In others cases, this diferences was related with de relation of Pers. Area and Subarea at 0001 infotype.
Regards!

Similar Messages

Display Personal Data Screen

Hi,
How can I change the layout of the display when I display Personal Data(PA20)?
I would like to display the Personnel No, EE group, EE subgroup, Pers. area and valid from.
In this first screen I would like to display the Name and HR data tabs too. In the HR data tab, it should have the followings:
1. Male and female button
2. Birthday
3. Language
4. Nationality
5. NRIC
6. Birthplace
7. Country of birth
8. Religion
9. Since
10. No. of children
Regards,
John

Hi,
Customizing Procedure-infotype menus-infotype menu-
Here you get two options
a) user group dependancy on menus n infogrps.
Here click new entries and gv ur menu name in the menu column,text,usergoup check box shud b ticked and last column ref mention ur ref number.
b)infotype menu.
Here in the pop up give ur menu name which u mentioned in the menu column in the first step.
click new entries.
mention ur user group,infotypes which u want to display in ur menu.
Save it
Go to the next node dat is Determine Choice of infotype menus.you wil get 2 options.Choose infotype menus.
here mention 01 dat is HR Master data as ur menu.
click new entries.
ur user grp,sno,menu shud be entered.
save the entries.
And finally in su3,save ur UGR.
Hope this helps,
Regards,
RR

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

Results view does not display any data

Hi
Every time I execute a query in the sql worksheet, I do not see anything in the results view. I only see the ouput in the output script folder. The output script view display is just like the usual sqlplus screen results. I want to look at the results in a table format that is suppose to be displayed in the results view.I used F5 and F9 to execute the query.
Can anyone tell me why this is so?
Example below is what I see in the output script view, when I run the query below.
select file_name,tablespace_name from dba_data_files;
FILE_NAME
D:\ORACLE\ORADATA\ORA92\SYSTEM01.DBF
D:\ORACLE\ORADATA\ORA92\UNDOTBS01.DBF
D:\ORACLE\ORADATA\ORA92\CWMLITE01.DBF
D:\ORACLE\ORADATA\ORA92\DRSYS01.DBF
D:\ORACLE\ORADATA\ORA92\EXAMPLE01.DBF
D:\ORACLE\ORADATA\ORA92\INDX01.DBF
D:\ORACLE\ORADATA\ORA92\ODM01.DBF
D:\ORACLE\ORADATA\ORA92\TOOLS01.DBF
D:\ORACLE\ORADATA\ORA92\USERS01.DBF
D:\ORACLE\ORADATA\ORA92\XDB01.DBF
D:\ORACLE\ORADATA\ORA92\TEST01.DBF
11 rows selected.
I want to be able to see the results in the results view in a table format. Why is this not happening?
Thanks.

It works for me, when I use F9. Ensure you select the statement (unless it's the only statement) then press F9, or click the triangle button.
I guess it makes sense for F5, or execute script, to not show a table as there may be many selects, and other statements, in a script and there is no specific return value from a script.
Message was edited by:
TonyW

I want multiple Firefox windows open w/different View settings - toolbars displayed in one, not in other. With the new version, I can no longer do that ?

I want to remove the toolbars in one open instance of Firefox but not in others.......this was possible in the prior version. Now if I change the settings in one instance, it automatically changes in the other open Firefox windows. How I can I make this work as it did before the upgrade? Thanks, Kris

Thanks a million! It was not intuitive to "swipe" the open applications up but it works perfectly!!
Thank you
shafferd

How to display the data in XML files into JSP using Jdeveloper.

Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.

Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

Master Data - Different Views (Warning message in Display Data)

Hello Experts,
I'd like to know what the difference between Display Data and Maintain Data when I'm querying a Master Data. I'm seeing differences between tha records when I'm using this options.
Other thing, when I'm using Display data, I'm getting the message below:
The data from the InfoProvider ZMATPLANT involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
I already activate the data in the object.
Somedy could help me?
Thanks!!!

Hi,
Regarding the message DBMAN242, you may try the SAP Notes #1454581 and #1364083.
About the differences, from what I can understand, in the maintain option, you will be able to edit the records. In the display mode, you won't. It is different when seeing the values because the screen for maintaining the data uses a different program. Therefore, the display is different.
For example, invalid characters are showed as '#' in the "display master data" screen. However, they are not displayed at all in the "maintain master data" screen. Only if you double click the record to open the pop-up screen for the record, you will be able to see the '#'.
Best Regards,
Paulo

I created a pdf form and then iported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I wo

I created a pdf form and then imported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I would like the form to open directly in Adobe Reader form to make it easier to enter information. Thanks, Ike

If you created it in Forms Central, you have to edit it there. I believe Forms Central is similar to LiveCycle Designer in that the form created is no longer able to be edited in Acrobat. I might be wrong, but that is my understanding. You add the submit button in Forms Central. Within Acrobat, you should be able to go to the forms menu and Manage Data to save the data to an Excel file. Others better with forms should be by to clarify things, but this should get you started. In the future you might find it better to post a forms question in the forms discussions.

Data transfer across 2 different views in web dynpro ABAP

hi all,
can anyone please help me on how to transfer data across 2 different views in wd ABAP.
i have made a view-1 and using another view-2 as a component which is displayed in the tab in view-1.
i am required to fetch a value from the view-1's input field and use it for a further processing in the view-2.
i want to use the value which is in the input field in the view1 as a primary key to get the whole record corresponding to that value and that complete record must be shown in my view2.
the thing here is view1 and view2 are 2 different views.
view1 has a tabstrip control.
the view2 is embedded in a tab of that tabstrip as a used component because it was not possible for me to build the view in the tab as a whole.
please help me out if anyone has done so?
thanx in advance.

Hi,
If both the views are in the same comp, define the context node which holds the input field of view1 in the component controller. Then map this same context node into the context of view2. Then in the inbound plug of view 2, read the context, and fire your select statement based on the input value.
Another way is, pass the input field from view 1 as a parameter when invoking the inbound plug of view2.
Regards,
Wenonah

Error In ESS personal Data View

Dear All,
I am facing an Issue in ESS .
When I click on Personal Information Page--> Personal Data and click on the Edit button I am able to edit my own data.
When i Click on the Exit button present there, the current window is not returning back to the Personal Information Over View page.. Insetad a new window is opened displaying the Personal Information Page.
Kindly help me in solving this isse.
Thanks and Regards
Siva

Hi Shiv,
This issue of new window will occur not only in Personal Data , but in other ess services as well. There is a setting which you have to maintain called the Wworkprotect mode.
For a single user it is ,
click the personalise link in the right hand top corner after logging into the portal.You will find an option called 'Work protect mode' in the Left hand side of the 'personalize' window. choose any of the radio button suitable for you. In this case, choose 'open in the same window'. and save it.Relogin to the portal to see the change.
For all users, you can make a general setting
Go to Sysytem Adminstration -> System Configuration -> Service Configuration -> Expand Application -> Expand com.sap.portal.epcf.loader -> Exapnd Service -> open epcfloader.Change the property Workprotect.mode.default to 2.
Right Click com.sap.portal.epcf.loader -> click on Adminstrate -> Click on Restart.
You can also refer to note - 734861
Regards
Reshma

Views not displaying any data

Hi,
We are experiencing a strange issue with views in production server.
Views created off of one query is not working where it is displaying "NO Data Available" ,
When the view is executed we fill in the company code and date and leve the remaining 10 selections with out filling, and we are getting "No Applicable data" ,but there is data for that selection.
When we go and try to refresh the variable screen it is filled with date in all selections which are not date fields, and that is causing the problem. " Not sure why the date is filled in all the selections"
Views on different query are working fine.
But the views on same repot are working fine in Development server. But not in Production. We didnt make any changes to that query. We also regenerated the query.We have bounce the java server. We have retransported the query and nothing worked.
We are on SAP BI 7.0 SP 22
Please suggest
Thanks,
Kiran
Edited by: Kumar on Aug 17, 2010 4:04 PM
Edited by: Kumar on Aug 17, 2010 4:13 PM

Amer,
Thank you for your reply, based on your suggestion i have been trying to look for the OSS note untill now there is no success.
I will still look for the note.
Just in case if any one come across this oss note please let me know.
Thanks,
Kiran

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

How to get rid of the "mil" in Data View's large Display meter

Hi, there! I have two analog voltage inputs that I am having signal express V2.5 to collect data on. The first input is scaled to inches while the second input is scaled to pounds. For some reason, as i bring up the large display in Data View, the meter will show this "mil" thing. It won't go away until the scale reaches 1.0000. For instance, if the scaled signal is less than 1.0000, it will indicate 900mil, 800mil, 50mil 1mil, and so on..... This really created alot of confusion for my lab.
I am hoping if you guys can tell me a way to make 900mil to become 0.900, 50mil to 0.050, and 1mil to 0.001
Thanks in advance!
Kin

Hi Kin,
Sorry about this. I don't believe there is a way for you to change this in SignalExpress 2.5. However we did add this ability in SignalExpress 3.0. Most displays now have a property page, including the Large Display, which allows you to specify the format and precision shown, including to remove the SI notation. By right-clicking on the Large Display and select Properties, go to the Format & Precision tab, and select the Floating Point option (instead of SI notation).
Again, I'm sorry to say that this option is only available in SignalExpress 3.0+.
Phil

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

Different views in PA20 (Display Personal Data)

Similar Messages

Maybe you are looking for