Different ways of adding FrameMaker files

What is the difference between the following two ways of
adding FrameMaker files to a RoboHelp project:
1. File > Import > FrameMaker document
2. Right-click project folder & select Add FrameMaker
File (with Copy or by Reference)
??

This is an old thread, but the answer is not sufficient, so I'm raising the question again.
RoboHelp is maintaining some kind of knowledge about the FrameMaker files, because the icon on the folder holding the individual topic files for a FM file will change to red, indicating an update is needed. Update based on what? I can make a text change in the FM file and the icon won't change, but at some point in the process, will get the red icon indicating the files need to be updated. It does not seem to retrieve changes to text, but I had a topic in which I had replaced a large graphic with a linked thumbnail image, and upon taking the bait and "Updating" the files, the thumbnail was replaced with the original image. During the update, the message says "Processing FrameMaker Documents."
So does anyone have a clearer explanation about the Add FrameMaker File > Add by Copy is doing?And should I ever/never/sometimes update the files?
I have FM 8.0p277 and RH 7.03.001 (can't upgrade due to client request).
Thx.

Similar Messages

[svn:osmf:] 10124: Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.

Revision: 10124
Author:   [email protected]
Date:     2009-09-10 10:40:10 -0700 (Thu, 10 Sep 2009)
Log Message:
Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.
Modified Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/.actionScriptProperties
Added Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld4.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld5.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld6.as

The connections which you have done are right, Here are some settings which you can set on your computer and check if this solves your problem or not.
Win XP: Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure"   jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
If still you face the same problem, then i feel it might be the problem with the Switch itself.

Different ways to deploye .par file

Hi,
How many ways we have to deploy .par file. As per my knowledge folloing are the ways
1. Deploying from NWDS
2. Portal -> Java Developer -> Portal Deployment
Is there any other way to deploy the par file like we can deploy .ear files from SDM.
We would like to remove PDK. So, the Java Developer role will be deleted.
Please let me know if we have any other ways to deploy
Thanks

Hi Bobby,
This is another way for PAR deploy
System Administration -- Support -- Portal Runtime -- Administration Console
Apart from that you check these links out :
Converting .EAR file to .SDA
Also for intro..,
http://help.sap.com/saphelp_nw04/helpdata/en/2d/b8b2426dbec86ae10000000a155106/frameset.htm
SAP Note: 696084 (For Multiple PAR deployment)
Regards,

Two separate versions of the same file corrupted in different ways...

I was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen? Has anyone had this or a similar problem? I want to know how to prevent this from happening in the future. Please help! Thank you. =)

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

Best Way to Copy Large Files

In copying files to a USB memory stick, is there a particular file size limit above which simple drag and drop using the Finder does not work consistently? In general can we assume that if it appears to copy OK, then the files are in good shape? For example, if I'm copying a Documents folder with 5 GB of data onto an 8 GB USB stick would it be appropriate to use drag and drop? What are the alternative ways to copy large blocks of data? Is there a way to use Disk Utility for this?
I should mention one of the reasons I'm asking. I've occasionally noticed large copying procedures sometimes cause the Finder to "hang."
I do have SuperDuper which I use to clone my internal HD to a peripheral HD on a regular basis. Would that software provide a way to copy single files or folders containing lots of files to my USB memory stick?
Thanks,
Steve M.
Message was edited by: Steve M.

Drag and drop is fine. There's really no good reason to do it a different way.
The only file limit is if the USB stick is formatted FAT32. Then 4GB minus 1 byte is the largest file size it can hold. If you format the stick as Mac OS Extended (HFS+), there's no limit to the file size, just the capacity of the drive itself.
If you need to share between Mac and Windows, then formatting the stick as ExFAT is best. The only catch is that versions of OS X earlier than Snow Leopard will not be able to read the drive. Windows XP, Vista and Win 7 can read ExFAT. There is also essentially no file size limit with ExFAT.
As far as the hanging, that may be the OS stalling on a file larger than 4 GB if the USB stick is formatted as FAT32.

Differents way of writing to file.

what are the way of writing file in java? why do we need all them?
do anointed me about this.

Try reading the API. Aside from that, there are different ways of writing to files precisely because different ways are needed depending on the context. For example, sometimes I need to write the contents of a stream to a file, others I need to append the contents of a StringBuffer. Most of the time, a means of buffering the output is recommended. And so on...

What are the different ways to upload file data to SAP? Please help

Hi Experts,
I have to transfer huge file data (few lakhs records) to SAP business transaction. What are the different ways to do the same? I have heard of BDC and LSMW. But are there any more options?
Which option is best suited for huge file data?
Is LSMW an old technology and SAP will not support it any more?
Kindly answer my queries at the earliest.
I will be greatful to you if you can help me.
Thanks
Gopal

for uplodig data to non sap we have 2 methodes
i) if u know bapi u will use lasm
2) bdc
but u mentioned so many records isthere
best thing is u will uplode all record sto al11 using XI interface
then u have to write bdc / lsmw program
beter to go for lsmw before that u will find bapi
if u will unable to find bapi
u have to create bapi and use it in lasmw
ofter that u have schedule the lsmw program as a bockground
then u have to create a job for it
and release from sm 37
then u have to moniter through bd87
if u want to go through i will help u.
if it is usefull to u pls give points
Saimedha

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Added new file but type still won't open in CS5

I would like CS5 to be able to open .m3u files as text files. I have added M3U into the Extensions.txt in my C:\Documents and Settings\[user]\Applications Data\Adobe\Dreamweaver CS5\en_US\Configuration\Extensions.txt, and the C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\Extensions.txt files. I've also added it to the C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml file. I have tried this two different ways: one by adding M3U as an addition TXT file, and the other as a completely new type.
In both cases, I can do File\Open and it lists my type (either Text Files (*.txt; *.m3u) or M3U Files (*.m3u)), but when I try to open a file with .m3u extension I get "Dreamweaver can't open .m3u files. Please choose an HTML, XML, or other compatible file."
Is there some other location I need to change this? Or is there somewhere to tell CS5 to open unrecgonized file types as text (the way Dreamweaver 8 used to work)?

Robert,
I would like CS5 to be able to open .m3u files as text files. I have added M3U into the Extensions.txt in my C:\Documents and Settings\[user]\Applications Data\Adobe\Dreamweaver CS5\en_US\Configuration\Extensions.txt, and the C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\Extensions.txt files. I've also added it to the C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml file. I have tried this two different ways: one by adding M3U as an addition TXT file, and the other as a completely new type.
You should never edit files in the *Application* Configuration folder (i.e.C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration). You should only edit files in the *User* Configuration fodler (i.e. C:\Documents and Settings\[user]\Applications Data\Adobe\Dreamweaver CS5\en_US\Configuration). The reason is that you can always delete your User Configuration folder to reset to your original installation files.
You said that you edited "C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml" but you should have edited the one in your User Configuration folder instead. If it doesn't exist in the User Configuration folder, then copy it there first, then edit it. You should just need to add it to the winfileextension and/or macfileextension attribute(s) as a comma-separated value.
You'll need to shutdown and restart DW.
HTH,
Randy

Two different ways to execute a custom method in an Application Module

I have a custom method exposed in an Application Module's Client Interface, and i know two different ways of executing it from my ADF Faces project (both works fine):
1) Calls the method directly through the Data Control:
MyModule service = (MyModule)JSFUtils.resolveExpression("#{data.MyModuleDataControl.dataProvider}");
service.myMethod();
2) Adding a Method Action in the PageDef's file:
<methodAction id="myMethod" InstanceName="MyModuleDataControl.dataProvider"
DataControl="MyModuleDataControl" MethodName="myMethod"
RequiresUpdateModel="true" Action="999"
IsViewObjectMethod="false"/>
//Call the method from the binding container
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("myMethod");
operationBinding.execute();
Basically i want to know: what are the differences (pros & cons) of each approach ??

Hi,
In my opinion the second way have a advantage, which its method could be invoke automatically using a invokeAction on pageDef, if necessary.
regards

How to tell what template is applied to a Framemaker file?

I'm new to Framemaker...so please excuse if this is a silly question.
We are trying to figure out how to tell what template has been applied to a Framemaker file. We are using the structured view in Framemaker 7.2.
Perhaps I am thinking too much like a Microsoft Word user -- in which case I can look at what template has been applied to a document.
Does Framemaker work the same way -- or are templates associated with Framemaker files in some other way?
Thank you --
J-Ha

J-Ha,
FrameMaker works differently. Strictly speaking, there is no way to tell which template was used last. A FrameMaker template is just a FrameMaker document which you call "template". Using File > Import > Formats you can import all or selected formats from one document to another. The main benefit: Each document is completely self-contained and does not require any other document.
Many solutions I know of include a user variable named something like "template-version" into their template document or put the version information on one of the reference pages. When importing user variables or reference pages, this can tell you version imported last.
- Michael

Fastest Way to Load Text Files Containing Thousands of Words

Hi, can anyone give me suggestions for fast loading of files containing many bytes in the form of a single word on a different line. The average file size is 45 kb. I'm currently splitting the words into separate files each containing 4000 words a piece. I use a different thread to read each file and then add all of the words into a single vector, formed by joining the vectors of each reader thread. Any suggestions for speeding up the process? (Currently, it takes about 30 seconds to load 52,000 words). My OS is Windows2000

Something seems wrong. There is no way that what you describe should take anywhere close to that amount of time, unless the computer is a constraint. I created a file of 56,000 lines, each line consisted of the byte string "abcdefgh" plus a \r\n,
for a total of 10 bytes per line - a total file size of 560,000 bytes (547 kb)
The following program read the file, created an ArrayList, and added the 56,000 lines to the list in less than 1 second, about what I expected. You might want to run it and see what you get.
import java.io.*;
import java.util.*;
class Zxin
    public static void main(String[] args)
        throws IOException
        FileInputStream fis = new FileInputStream(
            "C:/Documents and Settings/Chuck/My Documents/Java/junk/word.txt");
        InputStreamReader isr = new InputStreamReader(fis);
        BufferedReader br = new BufferedReader(isr);
        List<String> list = new ArrayList<String>();
        String data;
        while ((data = br.readLine()) != null)
            list.add(data);
        System.out.println("The list contains " + list.size() + " entries");
        System.out.println("The first entry in the list is: " + list.get(0));
        br.close();
}It printed these 2 lines:
The list contains 56000 entries
The first entry in the list is: abcdefgh

A different way to deal with "unknown" user after upgrade from Tiger.

It's a known issue that doing upgrade and install or archive and install from Tiger to Leopard, produces a lot of folders with "unknown" group in their "get info" panel. This has to do with a different group structure in Tiger and Leopard.
In Tiger, every user has their own private group with the same name as the username. That group is set to be user's primary group.
In leopard, every new user with an account is a member of the group staff (gid=20) which is not present in Tiger. Leopard doesn't fully understand Tiger's private group structure, hence the "unknown" group. This causes various problems such as Finder crashes when trying to change the permissions and ownership in the get info window.
Apple's proposed way of dealing with this is described [here|http://docs.info.apple.com/article.html?artnum=307128].
However, this method doesn't change the existing group structure and doesn't resolve all the problems.
I'd like to suggest a different way of dealing with it.
1. create a new admin user (if you don't have one already), log out of your primary account and log into the new one.
2. enter the following in terminal:
*sudo dscl . delete /users/"username"*
where username is the short name of the user on the main account (not the one you are currently logged into).
This will delete that user.
3. Log out/in.
4. go to system preferences->accounts and create a new user with the name and short name exactly as the one you've deleted in step 2.
You'll be get a popup saying that a home directory by this name already exists and asking if you want to use it. Say "Yes".
That's it. Your main user will be recreated using the native group structure of Leopard with gid=20(staff). Permissions on your home directory will be reset with correct group and ownership.
I tested the process on my powerbook after an upgrade and install from Tiger to leopard and it worked without a hitch.
I like this method better than Apple's because it completely gets rid of Tiger's group structure which was creating all the confusion. The only downside as far as I can see is that you might have to manually change the group ownership on some files belonging to the main user that sit outside your home directory.
I would appreciate any comments on this.

hmm, I confess, I did this before installing 10.5.2 so i can't say for sure. However, I've dealt with a few people (see e.g. this [thread|http://discussions.apple.com/thread.jspa?messageID=7012957]) who are running 10.5.2 and still have this issue. I don't know what if anything 10.5.2 did about this but I'm quite sure that it didn't change the group structure inherited from Tiger.
Message was edited by: V.K.

What's the best way to run FrameMaker 8 on a Mac?

What's my best bet for running FrameMaker 8 on a MacBook Macintosh laptop?
Can I run FM 8 directly under OS X, since it's a Unix app? Any special tricks to making it go?
Or will I need to run FM 8 under Linux or Windows? If so, I'll need to be able to copy and paste from one environment to the other. What are my options? Their pros and cons?
I'm switching from a PowerBook to a MacBook so I can run MacSpeech Dictate dictation software. Dictate ONLY runs on Intel Macs.
I currently use FrameMaker+SGML 6.0 in Classic. It CAN'T run on the Intel Macs.
I have over half a million words of FrameMaker files, including 7 volumes of cross-referenced research notes I add to almost daily. Since I am heavily dependent on FrameMaker's features, it's a must-have.
I haven't bought the MacBook yet, so if there are any hardware requirements I need to know about, or options I should consider or avoid, please let me know.

> If I understood him correctly, the Adobe salesperson I talked to
> yesterday runs the Unix version of FrameMaker directly under OS X
There is NO way to get the Unix (=Solaris) version of FM 8 to run
under OS X. It's an executable compiled for the SPARC processor,
and I don't think Apple has made a SPARC/Solaris emulator... :-)
/Thomas Michanek

Different ways of adding FrameMaker files

Similar Messages

Maybe you are looking for