Different ways of enabling cache

Hi
Doubt:
what are the different ways of enabling cache in obiee,other than "enable=yes" in Nqsconfig.ini file.
Regards
mervin

Hi Mervin,
You have to specify the cache settings on the Physical Table;
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_QueryCaching5.html
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

Multiple iPhoto libraries to manage photostreams in different ways

My wife and I both have iPhone's. I have a 5s and she a 5. We share an iCloud account so that all photos she takes and ones I take go into one photostream and then automatically get loaded on my iMac hard drive. This way we are sure to not lose any photos.
This works great for that purpose. However, I would like to create an iPhoto library that will only upload photos taken with my iPhone.
I know I can create multiple iPhoto libraries, but I would like to have the ability to manage preferences for each so that they manage photos in different ways.
Is there a way to do this?
Thanks in advance for any suggestions you may offer.
Keith

I know I can create multiple iPhoto libraries, but I would like to have the ability to manage preferences for each so that they manage photos in different ways.
Keith, the problem is, that only one iPhoto ibrary can be associated with the photo stream on any device, see e.g. http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=14%26se ction=2%26tasks=true
Photo Stream is designed to work with one Aperture or iPhoto library at a time. However, it’s easy to switch the library Photo Stream uses to upload and download photos.
If you enable the photo stream in a different library, the photo stream will be removed from the earlier library. You would continually have to reanable the photo straem when switching between libraries, and each time the stream would be reset. This way, auto matic import will not work reliably, because the photo stream would only be seeing the current ly stored photos in iCloud.
Have you considered to use the Shared Photo Streams for specific purposes? I am using the Shared Photo Streams as thematic iCloud albums, for wildlife photos, family photos, etc.
iCloud: Using and troubleshooting Shared Photo Streams
-- Léonie

Is there any way to enable SSH via Terminal in the OSX Installer utility list?

Hi guys, I've messed up my install a little on my internal HDD.. I can't boot into OSX as I keep getting kernel panics on boot. I was just wondering if there's any way I can SSH into my Mac Pro via the Terminal on the OSX Installer Utilities list.. I have a Macbook Pro to SSH from but I need a way to enable SSH via that Terminal "-bash-3.2#"..
I've tried to use the systemsetup -setremotelogin on command but I know SSH requires login keys and as I have no idea what can be used as those keys for the OSX Installer version of Terminal I have no idea how I can enable SSH..
Tried some sudo commands but as I guess it runs at a completely different level to sudo it won't actually recognise the sudo command..
Any help would be greatly appreciated guys, if you need me to post any info or results to help then just let me know.
Thanks alot
Chris

If your Mac cannot boot to the OS X installation then you will not be able to set up the SSH (Remote Login) sharing service. The OS X installer does not support any of the system's sharing services. Technically it does have the sshd daemon (server process) that you can set up to accept a connection; however, this will not give you any additional benefit.
The only reason to SSH into the system would be to get to the Terminal command prompt anyway, which is available when you boot to the Recovery HD partition and choose Terminal from the Utilities menu. If you were to set up SSH and log in, you would still only have the functionality provided by the Terminal in the Utilities menu, and not have access to your Mac's full OS installation.

2 different ways to setup IPSec ?

Hello,
I am currently trying to setup IPSec tunnel between a pfSense router and a Windows Server 2008R2 (The windows server is located behind a router with NAT enable).
First of all, I found two different ways to configure IPsec on Windows :
1) Through Windows Firewall with advanced Security
2) Through IPSec snap-in into MMC.
Which one should I use ?
Well, anyhow I got some troubles to negotiate phase1. By analyzing packets, it turns out that Windows server always return a NO_PROPOSAL_CHOSEN error code.
My settings for phase1 (on both sides):
Authentication method: PSK
Negotiation mode: main
Encryption: 3DES
Hash: SHA1
DH Key group : 2 (1024)
Lifetime: 28800
(NAT-T Enabled on pfSense)
Finally, I noticed that it is possible to define peer identifiers on pfSense. Is it possible to do the same on the windows server or does it automatically use the IP addresses as peer identifiers ?
Any help would be greatly appreciated.
Best regards,

Hi bibibubu1,
The 2008r2 can’t establish an IPsec tunnel behind NAT-T have a known issue, please confirm the following KB meet your environment then install the hotfix. Another possible
is you have select the matching Encryption schemes.
You cannot establish an IPsec tunnel to a computer that is running Windows 7 or Windows Server 2008 R2 through a NAT device
http://support.microsoft.com/kb/2523881
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to enable cache on Business service having protocol other than JCA

Hi all,
In my use case I should use cache on my business service which uses Http as its transport protocol.
when I try to use the cache on http business service I am unable to use the cache functionality.
When I try to use the cache on JCA business service I am able to use it. Please help me in finding the
ways in which I can enable cache functionality on the business service which uses the other protocols.
Thanks,
Phanindra.

Caching in Business Service should work fine on HTTP transport as well. What all configurations have you done in your HTTP business service and how are you testing it?

Picture Frame will not play vidoe, only stills. Is there a way to enable it to play video?

Picture Frame will only play the stills in my photo albums, not the video. Is there a way to enable it to do both?

Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred

Write a SELECT statement in different ways is not the same thing!!!

Let's take a look
use AdventureWorks2012
go
dbcc freeproccache
go
and now select something
select * from [HumanResources].[vEmployeeDepartmentHistory]
go
so, analyzing 'Compiled Plan'
SELECT usecounts, cacheobjtype, objtype, text
FROM Sys.dm_exec_cached_plans
CROSS APPLY sys.dm_exec_sql_text(plan_handle)
where cacheobjtype = 'Compiled Plan'
ORDER BY usecounts DESC;
GO
and now let's write some SELECT in "fuzzy case"
dbcc freeproccache
go
select * from [HUMANResources].[vEmployeeDepartmentHistory]
go
select * from [HumanRESOURCES].[vEmployeeDepartmentHistory]
go
select * from [HumanResources].[VEmployeeDepartmentHistory]
go
select * from [HumanResources].[vEmployeeDEPARTMENTHistory]
go
select * from [HumanResources].[vEmployeeDepartmentHISTORY]
go
SELECT * from [HumanResources].[vEmployeeDepartmentHistory]
go
select * FROM [HumanResources].[vEmployeeDepartmentHistory]
go
and now let's see compiled plans again
SELECT usecounts, cacheobjtype, objtype, text
FROM Sys.dm_exec_cached_plans
CROSS APPLY sys.dm_exec_sql_text(plan_handle)
where cacheobjtype = 'Compiled Plan'
ORDER BY usecounts DESC;
GO
So, write a SELECT statement in different ways is not the same thing!!!
Hope it'll be useful
P.Ceglie

Yes. There is little or no query normalization that happens in front of the query plan cache. It would be a performance tradeoff to parse and normalize the query before matching it to the cached plans. The benefit of reducing the number
of plans in the cache probably wouldn't be worth it.
David
David http://blogs.msdn.com/b/dbrowne/

Enabling cache in Tiger?

Hi. I'm running a Beige G3 with an OWC G4/500 upgrade card inside. Just upgraded from Panther 10.3.9 to Tiger 10.4.0 and then 10.4.11 without a hitch, all Software Updates installed easily.
But, I can't seem to figure out a way to enable the backside L2 cache on my G4's CPU like I could in Panther, which is... a problem.
Now obviously, this isn't a problem for most of you, since you don't use G3 or G4 upgrade cards... but presumably some of you do.
Anyway, does anyone know how to get it to work? Normally I post on the Beige G3 forum, but it's pretty much dead lately... very little activity.
Any thoughts would be appreciated.

Thanks for the links. I've decided to just dial it back to 10.4.9 until PowerLogix can get their software compatible with 10.4.11. which they've delayed until Apple releases the Source Code for 10.4.11 (10.0 through 10.4.10 is out, including 10.5.0... no 10.4.11...).
It's a basically generic G4 ZIF.. OWC took the liberty of branding their name on it and calling it a 533 MHz ZIF (it's actually marked as 450, and only runs stably in OS X at 500, though it hits 533 easily enough in 9).
Articles were interesting, though no insight into the Beige and 10.4.10 or later; voltage mods for G3s and G4s I'd never heard of, though.

My Rocket i7 2,7GHz / 32Gig Ram iMac cannot use Airplay, while the newer small 24" i5 with 4Gig Ram can. This is silly. Is there a way to enable Airplay for "older" Models ?

My Rocket:
Modellname:          iMac
Modell-Identifizierung:          iMac11,1
Prozessortyp:          Intel Core i7
Prozessorgeschwindigkeit:          2.8 GHz
Anzahl der Prozessoren:          1
Gesamtanzahl der Kerne:          4
L2-Cache (pro Kern):          256 KB
L3-Cache:          8 MB
Speicher:          32 GB
Geschwindigkeit für Prozessorverbindungstyp:          4.8 GT/s
Cant use Airplay. This is just silly...
While my other iMac 24" i5 2GHz can use Airplay.
Is there a way to enable Airplay on the good iMac also ?

AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
You might wish to check out the AirParrot.

Is there a way to enable tabbing betwen form fields on ipad?

I have forms created in Adobe Acrobat X Pro on an ipad 3. The forms work as expected apart from being able to use the tab key to move between fields. is there any way to enable this on the ipad. Works fine on a pc and tabs in the correct order.
thanks.

There is no tab button on the on screen keyboard. Instead, there you should use the prev/next. As for the bluetooth, this is something we're considering. One odd issue with PDF is that the fields aren't actually fillable fields until they are activated by tap. This is why the standard prev/next behavior with the tab key on the bluetooth keyboard doesn't work. However, this is something we're actively investigating for a future release. It won't be in our next release, but please keep an eye out for future updates.

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

Different ways to setup applets... what's best?

Alright. I need some help deciding how to setup an applet. I'm a high school student and I'm going to be in a competition on Saturday that will be using Java applets. I've been trying to get my hands on as much info about it as I can, but I've seen so many different ways of displaying things on an applet that I'm not sure what to do anymore.
So here's the deal. In a book I have, they set up applets like this:
import javax.swing.*;
public class Example extends JApplet
   public void init()
      getContentPane().add(new ExamplePanel ());
      set size (300, 300)
}And the other class:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ExamplePanel extends JPanel
   private vars
   public ExamplePanel ()
      set up listeners and set background
   public void paintComponent (Graphics page)
      super.paintComponent (page);
      paint stuff
   event methods
}I'm pretty sure this works fine, but while on the Java website, looking for examples, I noticed that sun sets up applets like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class Example extends JPanel implements listener interfaces
   protected and private vars
   public Example ()
      set up panels, labels, basically any JComponent stuff
      create listeners
      use add(...) to put stuff on applet
   event methods
   private static void createAndShowGUI()
        JFrame frame = new JFrame ("Example");
        frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
        JComponent newContentPane = new Example();
        newContentPane.setOpaque (true);
        frame.setContentPane (newContentPane);
        frame.pack();
        frame.setVisible(true);
    public static void main()
        javax.swing.SwingUtilities.invokeLater(new Runnable()
            public void run()
                createAndShowGUI();
}I don't know which way is better, but we don't have much time so I need something that's easy. The problem with the second one is that I don't know how to draw shapes on the second one and I might need to do that. I tried using paintComponent in it and things just got screwy. If anyone knows of a better way, please let me know. And since that one was developed directly from Sun, I'm guessing it's more efficient, so I would like to use that one if I can just learn how to use it as easily as the first.
Also, if anyone knows a completely different way to do this that's better, please let me know.

The second Example class shows an important issue: swing is not thread safe, and thus all GUI operations, including creating the GUI itself, must be done in the event dispatch thread. Read more about it at http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html#EDT.
The second class Example does also not seem to be an applet, that is why main() is used instead of init(). But even in init() you are not guaranteed that the current thread is the EDT - it is choosen by the browser you are using - and you should thus use invokeLater() there as well.
Appart from that, a component should not care if it is displayed in an applet or in an application.

A different way to deal with "unknown" user after upgrade from Tiger.

It's a known issue that doing upgrade and install or archive and install from Tiger to Leopard, produces a lot of folders with "unknown" group in their "get info" panel. This has to do with a different group structure in Tiger and Leopard.
In Tiger, every user has their own private group with the same name as the username. That group is set to be user's primary group.
In leopard, every new user with an account is a member of the group staff (gid=20) which is not present in Tiger. Leopard doesn't fully understand Tiger's private group structure, hence the "unknown" group. This causes various problems such as Finder crashes when trying to change the permissions and ownership in the get info window.
Apple's proposed way of dealing with this is described [here|http://docs.info.apple.com/article.html?artnum=307128].
However, this method doesn't change the existing group structure and doesn't resolve all the problems.
I'd like to suggest a different way of dealing with it.
1. create a new admin user (if you don't have one already), log out of your primary account and log into the new one.
2. enter the following in terminal:
*sudo dscl . delete /users/"username"*
where username is the short name of the user on the main account (not the one you are currently logged into).
This will delete that user.
3. Log out/in.
4. go to system preferences->accounts and create a new user with the name and short name exactly as the one you've deleted in step 2.
You'll be get a popup saying that a home directory by this name already exists and asking if you want to use it. Say "Yes".
That's it. Your main user will be recreated using the native group structure of Leopard with gid=20(staff). Permissions on your home directory will be reset with correct group and ownership.
I tested the process on my powerbook after an upgrade and install from Tiger to leopard and it worked without a hitch.
I like this method better than Apple's because it completely gets rid of Tiger's group structure which was creating all the confusion. The only downside as far as I can see is that you might have to manually change the group ownership on some files belonging to the main user that sit outside your home directory.
I would appreciate any comments on this.

hmm, I confess, I did this before installing 10.5.2 so i can't say for sure. However, I've dealt with a few people (see e.g. this [thread|http://discussions.apple.com/thread.jspa?messageID=7012957]) who are running 10.5.2 and still have this issue. I don't know what if anything 10.5.2 did about this but I'm quite sure that it didn't change the group structure inherited from Tiger.
Message was edited by: V.K.

Two separate versions of the same file corrupted in different ways...

I was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen? Has anyone had this or a similar problem? I want to know how to prevent this from happening in the future. Please help! Thank you. =)

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Hi Michael,
You can set the thresholds via an import file. The easiest way to do this (and this goes for all importable data, webapps included, 301 redirects and so on) is this:
1. go into the Admin and create a single item, in you case create a test product and set the thresholds
2. export that data - in your case export the product list
3. take a look at how the data looks like in the export file so you can get an idea of how the format should be like in the import file
Unfortunately you cannot set more than 2 thresholds, that is not possible at the moment.
Thanks,
Mihai

Different ways of enabling cache

Similar Messages

Maybe you are looking for