Differential - add to Job Code?

We have a newly created position where I need to figure a way to add shift differential ($0.50 per hour) to a job code. Ideally, I would like to add the differential hourly amoutn to a job code, then the regular & OT hours to multiply by this differential on the paylines per week. This may not be possible, but if anyone can offer assistance, I would greatly appreciate it!

What version of PeopleSoft HRMS are you using, and are you using Global Payroll or Payroll for North America?
Normally you would setup shifts in the shift table and connect them to earnings codes. The documentation for your Payroll product has the details.
Regards,
Bob

Similar Messages

  • Creating users with supplier, buyer, job code info.

    I am writing a java app to create users in oracle apps.I am using apps api package fnd_user_pkg to create users,update users,add responsibilities.
    I need to add some extra attributes e.g. supplier, buyer, planner, job code info while creating a user.Is there any api package like fnd_user_pkg which can be used to update tables with above info? or should i update the tables directly?

    Thanks for the reply.  I was actually hoping the I-Chain/EDirectory variables would be available as CGI variables.  Here are some of the CGI variables I tried to retrieve from the header.  As you can see, only two contained values.  There must be some other way to obtain these.  I'd played around with CFLDAP, CFHTTP, etc.  No such luck.  But as mentioned, the IS dept says the values I'm looking for (UserID, Name, Location, etc.) are all being sent in every header (every response from the server).  Am just not sure which CF tags/tools to use to capture them.  Maybe it requires some special script.  I tried a few of those found in the CF7 on-line help, but no luck in getting the scripts to run.  If any other thoughts or suggestions, they would be much appreciated.  Thanks again, Gary1.
    <CFSET ValidSource1 = CGI.QUERY_STRING>
    <CFSET ValidSource2 = CGI.HTTP_REFERER>
    <CFSET ValidSource3 = CGI.REMOTE_USER>
    <CFSET ValidSource4 = CGI.REMOTE_ADDR>
    <CFSET ValidSource5 = CGI.AUTH_USER>
    <CFSET ValidSource6 = CGI.REMOTE_USER>
    <CFSET ValidSource7 = CGI.SERVER_NAME>
    ValidSource1 =
    ValidSource2 =
    ValidSource3 =
    ValidSource4 = 57.14.131.12
    ValidSource5 =
    ValidSource6 =
    ValidSource7 = aometrics.xxx.com

  • Job code not coming in profile identities in PeopleSoft

    I log in to the application as PS. When I go to non-person profile and try to add a new non-person profile, the job code associated to betty locherty is not coming up in the prompt button. What can be the reason ?

    Dear Khaled,
    please run the report
    RHINTE20  Create missing objects (OM or PA)
    RHINTE30  Transfer Org. assignment in batch input folder for infotype
    Best Regards,
    Deepak.

  • Getting CI Error while Update Job Code Description :

    Hi All,
    Am getting the CI error (Error saving the component interface CI_CMP_RULE_DEFN for Rate Code Defaulting Rule) while try to update the Existing Job code description. But am able to add the new job code details .
    The message catlog number MESSAGE_SET_NBR=1000 AND MESSAGE_NBR=1102 is getting trigger to throw the error.
    Can any one help me on which scenario this error will occur.
    Regards,
    Hari A

    This is called in JOB_CODE_TBL SavePostChange Function Update_Jobcode_Rule.
          If (ciHasErrors(&ExceptionArray)) Then
             /* Create an error because CI was not successfully saved. */
             Error MsgGet(1000, 1102, "Message not found.", &RULE_ID);
          ElseThe code is already passed the getci, so you do have permissions to start this CI, but the save was unsuccessfull.
    See if you can try to find some more loggin in the appserver or run it in trace mode the see the actual error.
    Hakan

  • Storing multiple PeopleSoft Job Codes and Departments in OIM

    Hello,
    We are trying to set up the PeopleSoft ER connector for OIM but it seems that OIM is not able to properly receive all the data that PeopleSoft sends it. In PeopleSoft, a lot of people have multiple Job Codes and Departments. When PeopleSoft sends WORKFORCE_SYNC messages, OIM receives all of them, but discards everything but the last Job Code and Department it receives. This behavior is not surprising since OIM only has a single field for the Job Code and a single field for the Department. We would like to store all Job Codes and Departments, but are not really sure how to address this issue.
    Has any of you encountered this problem and solved it?
    Thanks,
    --jtellier                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    This error is appearing as requires "jrf-api.jar" to be present in its CLASSPATH.
    Check if both following jars are present in CLASSPATH
    wlfullclent.jar
    oimclent.jar
    If not resolved-
    A simple workaround to fix the issue is:
    Add following jarfile to CLASSPATH property
    $MW_HOME/oracle_common/modules/oracle.jrf_11.1.1/jrf-api.jar
    where MW_HOME is the Middleware Home of FMW target .

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • How do I add a tracking code to my page?

    I want to add a tracking code to my page but iWeb doesn't seem to allow it. I copied the html code from a 3rd party site (Google Analytic) and tried pasting into the html widget in iWeb but when I check the tracking report it keeps telling me the code has not been installed. I have tried placing the text block at various places on the page and still no luck. The directions at Google Analytic tell me where I need to paste it into the html code but to do that I need an html editor or a text editor that can read html.
    Am I doing something wrong with the html widget? If a tracking code can't be added with a widget is there a way I can edit the source code directly? A text editor, maybe? I tried Word but but it wouldn't open the page.
    Thanks for any help!
    Rikki

    There's a way to add Google Analytic to pages without having to edit the page. It's a little bit of work but it's a one time process. Read about it here: http://www.wyodor.net/blog/archives/2010/05/entry_316.html
    Or you could add StatCounter to each page to get not only the number of hits but lots more information:
    Click to view full size
    This tutorial describes how to add it: Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet.
    OT

  • How do I add an area code to a phone number after clicking number in text message?

    Some people send 7 digit phone number in emails and text messages, and I need to add the area code to the front of the number, or else AT&T will choke. I have not found a simple way to do this.
    Current method: copy number to notes, add area code, then paste full number into dialer

    Any carrier in the U.S. will choke unless the number is in your area code.
    I'm not aware of a way to do this. Selecting the number dials the number.

  • How do I add the country code to all contacts when it did not previously appear?

    I just moved from the US to the UK and purchased a new iPhone 4S.  When my contacts migrated from Outlook to the iPhone they did not include the country code in the US and therefore all contacts numbers are now listed incorrectly.  How can I add the country code to hundreds of contacts painlessly?
    Thanks in advance.

    International Assist is activated.  Upon further review this appears to be a case of the original country codes not being added when the contact list was constructed.  iOS has not figured this out and thus when changing countries I've been forced to add the country codes to every contact record manually.  Disappointing and very labour intensive.  If only Apple allowed for a macro that simplified the mass change.

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • Org. Unit & Job Code not diplayed in IT0001

    Dear Consultants
    I have a problem which is the Org. unit and job codes are not displayed in IT0001 although I did the following:
    -     Integration between PA and OM in T. Code OOPS was set in PLOGI ORGA first.
    -     Structure was created using PPOCE and PPOME then we hire employees through PA40 through LSMW.
    -     The employee hire date and the date of creating O,S, and C is the same.
    -     The data of Company code Personnel area and sub area was recorded in account assignment tab in Organization and Staffing when creating the structure and positions.
    -      After loading the Employee data I run the report RHINTE00 and the employees displayed in PPOME.
    -     Then I run report  RHINTECHECK  and there are no issues.
    -     Then when I see that Org. Unite code and Job Code are not displayed in IT0001 I report RHINTE30 but he said (Personnel numbers for which an update is not necessary) and still Org. unit and job code is not there in IT0001.
    Is there anything else I can do to solve that problem?
    Regards
    Khaled

    Dear Khaled,
    please run the report
    RHINTE20  Create missing objects (OM or PA)
    RHINTE30  Transfer Org. assignment in batch input folder for infotype
    Best Regards,
    Deepak.

  • How do I add my request code offline to allow me to use Acrobat Pro XI

    I have been trying all morning to find out how to add my request code for the Acrobat Pro XI.  I have generated all the off line info I needed and now have the request code that I am struggling to find where to add.  Any link or help please??

    Hi Susan,
    I have checked your account and found that  Adobe Acrobat XI Professional has been activated, please let me know if you are still facing any problems with the activation. 
    Alternatively you can contact support here for the activation support
    If you want help with the offline activation, you may use the doc Offline Activation
    ^Ani

  • How to add a custom code to standard sap menu

    Hello guru,
    will you please explain me how to add a custom code to standard sap menu?
    thanks in advance.
    Best regards.
    juan

    Hello juan,
    with SE43N you can add custom transaction codes to the existing menues.
    see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
    regards
    johannes

  • How to add order reason code field to selection screen of VL10

    Hi,
       How to add Order reason code(vbak-augru) to the selection screen of VL10.
      1. How to find enhancement for it?
       2.I want to display Order reason code field on output list also?
      3.Pls give steps i am new to enhancements
    thanking u advance...
    surya

    Hi,
    there is no user exit available for this report program, one alternative is copy the program associated with this standard program i.e. RVV50R10C to a Z program and modify it as per your requirement or if you want to modify the standard program you need access key.
    Regards,
    Raghavendra

  • Is there a way to add a QR code to a file in photoshop?

    Is there a way to add a QR code made from a website generator (i.e. qrstuff.com)? When I tried to add it to the file, it said "Could not place the document because the current document has an input-only color profile."
    Is there a way to get around this or work with it in some way?

    There is not.
    Even with the high res art from the iTune Store, I believe the file size increase is less than 2%, at least for my library.

Maybe you are looking for