Differentiate bulk email from user email

Currently i am looking for best practices regarding differentiation of bulk email and user email. I know i could be done by setting up different interfaces with their own private listeners, however, this way applications that send bulk email have to be reconfigured.
The question is: are there other best practice config examples how to differentiate bulk email from user email? Of course, this concernes outgoing email traffic.
Thanks in advance!
Nino Laudani

Similar Messages

Alert emails from Users when BIA blade gone down

Hi all,
We have BIA version 50 in production in some scenarios during peak reporting days one of the blades overloaded and going down .
We have alert emails configured to whom it should send the alerts , some times we are getting emails from users like 30 to 40 emails when BIA blade restarted not sure why we are getting emails from users.. other than from TREXADMIN
Is there any configuration or parameter we can check for this...
Thanks,
Subhash.G

Hi Subhash,
if the BIA isn´t available and a user executes a query which runs against the BIA, you will get an email directly from this user, because you have configured some receivers in table RSDDTREXEMAIL. Related to this there also will be some entries in table RSDDTREXHPAFAIL.
Regards,
Jens

My IPAD is downloading old emails from my email account on my PC. How can I get it to stop?

My IPAD is downloading old emails from my email account on my PC. How can I get it to stop?

You might be able to trick iMovie by temporarily moving that project folder out of the following location:
Mac HD > Users > (your home folder) > Movies > iMovie Projects > (look for the name of the project that blew-up)
Drag that project folder to the Desktop for the time being. Launch iMovie and see if it still tries to create the Project Thumbnails. If it gets past any error messages or other house keeping, you can create a new project. Otherwise, quit iMovie. Drag that project folder from the desktop BACK into your iMovie Projects folder. Try launching iMovie again and see if it gets stuck generating the Thumbnails.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200

I am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

With one mailbox server in the production site and one in the DR site, you do not have high availability. If the main site goes down, the cluster loses quorum and all databases dismount. You must then force quorum or move the file share
witness to restore quorum.
I can't tell you why what you observed happened. At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
To send mail outside, you must allow relay. To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay. There are plenty
of articles on the Internet that describe how to configure a relay connector.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I just upgraded to Firefox 8 from Internet Explorer. Previously, I pulled up my emails from Start, Email-Microsoft Office Outlook. I get no response doing that now. How should I get my emails?

I just upgraded to Firefox 8 -- from Internet Explorer.
Previously, I pulled up my emails from Start, Email-Microsoft Office Outlook.
I get no response doing that now.
How should I get my emails?

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Iphone 5 not downloading emails from one email address. Other email address work ok. Any suggestions?

iphone 5 not downloading emails from one email address. Other email address work ok. Any suggestions?

Hello rtie1,
Thanks for using Apple Support Communities.
For troubleshooting Mail on your iPhone please follow the steps in the article linked to below.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Take care,
Alex H.

All SAP ITSM outbound emails from one email address

How to send All SAP ITSM outbound emails from one email address.. ?

You can set the default sender. Check this out:E-MAIL INBOUND CONFIGURATION- ALM: Incident Management - SAP IT Service Management on SAP Solution Manager - SCN Wiki

When I send an email from one email address, the reply is always received in another email account?

When I send an email from one email address, the reply is always received in another email account?
Thank you,
Alain

In Mail preferences under composing tab, check to see what you have for sending new messages from.
You can also check the account settings and make sure you have the correct SMTP server for each account and the correct settings for each. Also check the box to use only that server for the account so it doesn't switch to another accounts server without asking if there is a failure with one.

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong?

Each email account can have its own alert or notification settings.
Settings > Notifications > Mail > tap on each account and set the alerts you want.

Can't unsubscribe from user email notification in Forums

In this post http://forums.adobe.com/thread/416458, user Jochem said to start a new discussion if the steps provided did not unsubscribe someone from getting emails. I did all steps, and there's simply no way to mark the subscription I want to remove. Please see the screenshot Jochem said to attach (below). When I go to Your Stuff | Profile and choose Email Notifications, the user I'm following is not listed, even though the filter is set to "All Items."
Even if I chose "User" from the filter drop-down list, it does not display the user I'm following. If it did, I'm sure I could easily remove the notification. This seems to be a bug. Could someone confirm by signing up to follow a particular user and then verifying whether or not it displays under Email Notifications?

Here's what I got this morning. I have not subscribed to this thread; I'm receiving it because of subscribing to the user "MergeThis."
I don't know what you mean by showing you the full reply-to address, since I posted what I thought you wanted earlier. If I reply to unwanted messages below, the address it wants to replies to is [email protected]. Others include [email protected], [email protected], and [email protected] taken from a few of the emails I've been getting.
This is the email in its entirety; again, this is just one example of what I get on a daily basis from this user's posts.
-----Original Message-----
From: MergeThis [mailto:[email protected]]
Sent: Tuesday, August 31, 2010 8:31 AM
To: [my name]
Subject: [WebHelp] RH8 Single project not merging
Possible issues:
1. The parent is not calling for the child properly.
2. The child folder is either incomplete or is in the wrong place.
3. The perl script is incorrect.
(1) You might check the parent TOC file (parent.hhc) for these two lines (in the proper order):
<item name="child_dir" merge="::/" merge2="child_dir">
</item>
(2) The webhelp.ssl file (in the child_dir project) should have this line:
<element name="DestinationProjectName" value="C:\generate_dir\mergedProjects\child_dir\start.htm" />
(3) Compare the perl script for this child to any of the others that work.
If these are all OK, it's time to put down the scalpel and pick up the chain saw.
Generate the parent and this child only to an entirely new directory structure; does it appear now? If so, go back to your initial directory structure and:
1. In Win Explorer, remove the entire folder for this child project (the "generated" folder under the mergedProjects folder).
2. In RH (not your Perl script), generate the child project.
3. In RH (not your Perl script), generate the parent project.
Good luck,
Leon
This message was sent to: amj0948
To post a reply to the thread message, either reply to this email or visit the message page:
http://forums.adobe.com/message/3096918#3096918
--end--

How to move an email from user mailbox to shared mailbox using apps for office mail app

How can I move an email from a users main mailbox to a shared mailbox using apps for office. I know I can do this manually but i am creating an for owa/outlook that would be a button to move the item. I have tried using ews but can only find
the commands to move emails inside the users mailbox
for example :
'<?xml version="1.0" encoding="utf-8"?>' +
'<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"' +
' xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages"' +
' xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types"' +
' xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">' +
' <soap:Header>' +
' <t:RequestServerVersion Version="Exchange2013" />' +
' </soap:Header>' +
' <soap:Body>' +
' <m:MoveItem>' +
' <m:ToFolderId>' +
' <t:DistinguishedFolderId Id="junkemail" />' +
' </m:ToFolderId>' +
' <m:ItemIds>' +
' <t:ItemId Id="' + id + '" ' +
' ChangeKey="' + changeKey + '" />' +
' </m:ItemIds>' +
' </m:MoveItem>' +
' </soap:Body>' +
'</soap:Envelope>';
Can I create a xml that would would do this? Is there a way to do it using the EWS service reference. I do not want to use import/export to do this.

yes I was able to make it work using Microsoft.Exchange.WebServices.Data and writing it as a web API, however i am unable to to authenticate the user if it is hosted on another server (without them retyping their password. I assume that
their is a matching java script version of what i am doing on the api side. I am just stuck trying to figure it out. the below code works as a Web Api if i could authenticate the user.
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013);
service.Url = new Uri("Ews url");
service.Credentials = CredentialCache.DefaultCredentials;
//service.UseDefaultCredentials = true;
// Create a new folder view, and pass in the maximum number of folders to return.
FolderView view = new FolderView(5);
// Create an extended property definition for the PR_REPLICA_LIST property.
ExtendedPropertyDefinition PR_REPLICA_LIST = new ExtendedPropertyDefinition(0x6698, MapiPropertyType.Binary);
view.PropertySet = new PropertySet(BasePropertySet.IdOnly, FolderSchema.DisplayName, PR_REPLICA_LIST);
// get to the inbox folder of spam mailbox
Mailbox SpamMailbox = new Mailbox("Smtp of other mailbox");
FolderId SpamInbox = new FolderId(WellKnownFolderName.Inbox, SpamMailbox);
Folder SpamFolder = Folder.Bind(service, SpamInbox);
FindItemsResults<Item> findItems = service.FindItems(WellKnownFolderName.JunkEmail, new ItemView(10));
foreach (Item item in findItems)
item.Load();
ItemId ItemToMoveId = new ItemId(item.Id.UniqueId.ToString());
Item ItemToMove = Item.Bind(service, ItemToMoveId);
ItemToMove.Move(SpamFolder.Id);
//item.Move(SpamFolder.Id);

Email from specific email not being forwarded to BB

Since I have set up my owa email account on the BB, using BIS, there are emails I am unable to receive from specific users on the BB. These users are within the same domain as me and the emails are in my inbox when I log in to my account through IE. I also use an IMAP account on the BB and those users are copying that email and those emails are forwarded to the BB via that email, but not my email via OWA. Has anyone had this issue before, does anyone have any kind of solution to this problem?
We have already deleted and readded the email on the BB and nothing is working....
Any insight would be helpful.
Thanks

Look through the Cookie extensions at AMO for an extension that has the features you want.
[https://addons.mozilla.org/en-US/firefox/search/?q=cookies&cat=all&lver=any&atype=0&sort=&pid=1&pp=20&lup=&advanced= AMO search for "cookies" extensions]

Cannot send emails from mac email address

Over the past 24hrs I am unable to send emails from my ibook and sporadically from my iphone. Please advice what the settings should be for SMTP and port. I think this might be the problem but I am unsure. I have a mac email address. I can send emails from my icloud account. Any help would be appreciated. Thanks

Wow, after research I can't believe what a problem BT is!???
This post by vanessa seems to have gelped many that could not send...
Just set up my macmail with the help of the BT guys after a year of struggling! Hopefully this could work for others for whom the emails will receive but NOT send....
Set up your 3rd party domain names via the mail relay system and confirmed via BT. Then try these settings.....
In your @btconnect.com email set its up using these:
incoming mail server: pop3.btconnect.com
username: the bt email
password: the bt email password you supplied
outgoing mail: we'll come to this!
on the drop down box next to Outgong mail server (SMTP) select 'edit SMTP server list'
press '+' button and add these details....
In the Account information tab:
Description: mail.btconnect.com
Server Name: mail.btconnect.com
In the advanced tab:
Select 'Use default ports'
Authentication: Password
username: the bt email
password: the bt email password you supplied
NOW The next bit, the 'second' server....
press '+' fro a new server add these details....
In the Account information tab:
Description: second server (or any name you want)
Server Name: mail.btconnect.com
In the advanced tab:
Select 'Use default ports'
Authentication: NONE!
Now on all your email addresses back in the accounts section, set the SMTP server to 'second server' (or whater you hae called it) NOT mail.btconnect.com and select Use only this server.
http://business.forums.bt.com/t5/Email/How-to-Set-Up-Mac-Mail-OSX-Lion-inc-mail- relay-Message/td-p/30323

Differentiate bulk email from user email

Similar Messages

Maybe you are looking for