Differentiate ring tone for internal/external call

how to differentiate ring tone for internal call and external call?
rgds,
walad.

Floyd,
Those parameters were changed in 4.1 CCM. I don't believe they are going to affect Ring Type but could effect CFNA or CFB settings.
?Use the Call Classification field in the Cisco CallManager Administration Gateway Configuration window to configure H.323 and MGCP gateways with the option for OffNet, OnNet, or Use System Default.
?The default value for H.323 and MCGP gateways specifies OffNet.
?The default value for intercluster trunks (ICT), or trunks other than SIP trunks, specifies OnNet.
?In Cisco CallManager release 4.1, Call Classification replaces the H323 Network Location, MGCP Network Location, and MGCP Network Location OffNet for E1 and T1 service parameters.
?To configure trunks and gateways, the administrator can use the Call Classification clusterwide service parameter and choose the Use System Default option for the individual trunks and gateways.
?By default, the service parameter specifies OffNet.
?You can also configure trunks and gateways individually.
?The system considers FXS and phones to be OnNet; you cannot configure them.
The only way that I know of to achieve what you want is dual-line. Ring settings can be set per line or a default for the phone. You could use a unique inbound Gateway CSS with a 2nd line on the phones just for inbound calling. Then you can specify the ring on the phone to be different for the second line.
There is nothing in 4.1 and below (again to my knowledge) that will allow for distinctive ring per call. You should double-check the 4.2 and 5.x release notes to make sure there isn't a new feature though.
Please rate any helpful posts
Thanks
Fred

Similar Messages

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

Set up ring tones for family won't work

Anyone have this problem??? I set up different ring tones for my 'family' - I was told I did set it up right, but for some reason it just does the default ring when those people call. (Default for me in the 'old phone' ring).... I called Apple and phone was 'reset' etc., they will call again today :-( I love my iPhone and do miss my old ring tone i had for them.
Any help thanks!

Thanks. I did see that troubleshooting guide and went through most, if not all, of the steps.
I neglected to mention in my original post that my home computer is a Mac. When I set up the iPad on the PC at work, I did tell it not to sync at that time because I wanted to wait and sync it at home. Now that iTunes on the home computer doesn't see the device, I can't figure out how to change that...

CCM 4.1(3)sr3a different ring tone for different line

Hi there,
I've got a dual line 7941 phone and would like to configure different ring tone for each of the lines. eg. I've got ext 100 and 101 on my phone. i would like the phone to ring differently when a call comes into 100 and 101 so i can know just by the ring tone which number has been called.
Can anybody help?
Cheers,
Jesminder

Jesminder,
Unfortunately ring tones are configured at a phone level. In order to do this you need to go to the phone, push the settings button, select ring type. From there you will get a menu. Line 1 of the menu is the default ring. Line 2 and on corresponding to your line numbers in order. So if you want CallManager line 2 to be a different ring tone then you will select line 3 from the ring type menu, it should have the extension number next to it.
There also might be a way to set it via the web interface. You would want to post in the Ip Communications - Ip Phone services for end users forum.
Please rate any helpful posts
Thanks
Fred

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How can i set up different rings/tones for incoming emails for different email accounts?

HI, I would like to be able to hear different rings/tones for emails coming from different email accounts. Eg, One sound for incoming email from gmail and another sound for incoming e-mail from Yahoo.
Thanks!

" Is there a possibility to set up different ringtones for each of the emails separately? "
No. Maybe with ios 6 this fall.
"Also would there also be an option for high priority emails to have a different ringtone as well?"
No. Maybe with ios 6 this fall.

SCOT configuration for internal & external email system in EP.

Hi,
I want to add SCOT configuration for internal & external email system in SAP EP 7.0 ?
What all steps I need to do ? any good documents on this ?

Hi Haider,
I have read the link you have given me to configure SCOT. I have 3 doubt plzz clarify.
Doubt No. 1:
In that link its mentioned that I have to add 2 profile parameter in the transaction RZ10 namely icm/server_port_<>* and is/SMTP/virt_host_<>*
My question is Can I put any value which i like in place of * like can I add either icm/server_port_2 OR icm/server_port_3 OR icm/server_port_4 in icm parameter AND ALSO
Can I put any value which i like in place of * in is/SMTP/virt parameter like can I add either is/SMTP/virt_host_0 OR is/SMTP/virt_host_1 OR is/SMTP/virt_host_2 .
Doubt No. 2:
What port value I have to put in the profile parameter    icm/server_port_2 in RZ10. Can I put any port value ? and automatically that port will work? say suppose I addded this profile parameter in RZ10
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180          so automatically 25000 port will work ? or will it give error?
Doubt No. 3:
When I go to SMICM transaction and go to services , I get the following:
No. Log         Service name/port     Host name           Keep Alive    Proc TimeOut   Active
1     HTTP               8000                  epv.sopm.com           30                     60               Yes
2     SMTP               0                       epv.sopm.com            30                    60                Yes
3     HTTPS             8001                 epv.sopm.com            30                    180               Yes
This means that HTTP port is 8000,   HTTPS port is 8001. My question is why in SMTP its showing 0, why no port is shown?
I have not added any profile parameter like icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180     for SMTP in RZ10 as of now.
Is this the reason for this ?

Ring tones for certain people

How do I set certain ring tones for specific contacts???
Many thanks

Hi Napfla745,
Try going into Options > Sounds&Ringtones > Sounds for Contacts from there you can add contact alerts.
sent using my fingers :0

Different ring tones for different email accounts

Is it possible to set different ring tone for different email accounts?

No - but you can change the sound for the email the notification in the settings .... Settings>General>Sounds>New Mail> and select another sound from the list, but that will use the same sound for all of your email accounts.

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

Yeah, I did. But if I go to settings and change the standard ring tone again, the ring tone for that special contact is still the old standard tone. But I want to 'tell' my iPhone/iPad that this contact should always have the standard ringtone from settings.

6220 Classic - ring tones for individual contacts ...

My partner and i both got the 6220 classic at the same time.
On his phone he can select a contact, then options and scroll down to ringing tone and have a different ring tone for each contact or group. When I do exactly the same, it says under the contact name that their ring tone has been changed, but it still plays the standard tone. Despite saying that each contacts ring tone is different, it just plays the same one for each.
Is there a setting somewhere which we've missed? Can't understand why it works fine on one phone but not on the other.

Nope, not currently... but hopefully that change is coming in an update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does iTunes still offer ring tones for iPhone?

Does iTunes still offer ring tones for iPhone? I cannot seem to locate it on the web site.

Yes.
Some songs available via the iTunes store are also licensed to be sold and used as a ringtone. You can use the iTunes ringtone creator to create a ringtone for your chosen segment of a song that is also licensed to be used as ringtone.

Old ring tones for BB10

i made a collection of ring tones for you in zip format for you to use
no guaranteee if it works but it should
i test in a bit
if work ok let me know
enjoy
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V
Attachments:
old ring tones.zip ‏4767 KB

rat-7 wrote:
I have downloaded the ZIP file and copied the content into the Z10, but when I try to use them in the SETTING > NOTIFICATION, I get the listing of all of the pre-install notification, but I can not get to the new notifications
Where am I suppose to place them on the phone so that the system will find them
After you click to choose the ringtone, you'll see the pre-installed ones listed, at the bottom of that list you'll see "Browse music..." choose that and navigate to where you saved the other tunes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can anyone help me? i am unable hear ring tone for incoming calls from my iphone 4.

Hi,
I am unable to hear incoming call ring tone. But able to talk calls and hear music through headphone.
But without headphone not able to hear music .Is there any settings to control speakers other than sounds.
Can anyone help me to solve the issue.?
By the way vibrate settings are working fine.
Thanks in advance for your help.

First check the silent switch located above the volume buttons on the side. Make sure it doesn't show any oragne.

Differentiate ring tone for internal/external call

Similar Messages

Maybe you are looking for