Differerence betwin distubution rules and settelment rule

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Hi gurus any doby explain the difference betwin ditibution rule and settelment rule.

Hi friend,...
The distribution rule is part of the settlement rule. You specify the following for a settlement sender:
Settlement receiver
Settlement share (percentage or proportional)
Settlement type (periodic or cumulative)
Validity of the distribution rule
The system automatically assigns a settlement rule to the production order when the order is created. The assignment is carried out via the default rule defined in Customizing.
The settlement rule includes one or more distribution rules for the production order. The distribution rule consists of a cost receiver, a settlement share and a settlement type:
The settlement receiver determines to which cost object the actual costs of the production order are to be settled. Possible receivers include
a material
a cost center
an internal order
a sales order
a project
a network
a fixed asset
The settlement share determines the percentage rate or the equivalence number to distribute the costs to the individual cost receivers.
The settlement type determines whether all the costs are settled which were incurred for the order (full settlement) or whether the costs collected on the order are to be settled periodically (periodic settlement).
for more details u may go the following link...
http://help.sap.com/saphelp_47x200/helpdata/en/e9/7a0716cde011d19eb4080009b0db33/frameset.htm

Similar Messages

Check Incompletion Rule and Completion Rule on Sales Document

Hii Guy...
where can i check Incompletion Rule and Completion Rule on Sales Document type the backgroud table of Sales order and item category ?

Hi friend,
Incompletion procedure you can check in the OVA2 transaction code.
There you can find the incompletion procedre for the sales document header as well as item.
Path: IMG-->SALES & DISTRIBTION->BASIC FUNCTIONS---> INCOMPLETION PROCEDURE--->
There you can find all the settings of the Incompletion procedure.
If you want to check the incompletion procedre in the document, then goto EDIT---INCOMPLETION LOG
FOR item click on the item and goto EDIT---INCOMPLETION LOG
regards,
santosh

Transfer Rules and Update Rules

Hello,
What is the exact difference between Transfer Rules and Update Rules ????
NImisha

Hi Nimesh,
   Transfer rules are the combination of communication structure and transfer structure here you are sassing the fields between transfer structure to communication structure..
   Updater rules are crating between data marts and info source, here you are creating the update rules based on communication structure.
   For more information go through the following link...
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/1251421705be30e10000000a155106/frameset.htm
Regards,
PRK
Message was edited by: PRK

Transport Rule and Journaling rule query

HI I am using Exchange 2010
i am using transport rule and journaling agent in my setup.
i would like to know when both agents applied to an user which agent applied first transport or journaling?
Ex:
On server, I have created n Transport Rule policy for an user to to move all incoming mails deleted items for the same user i have created journaling policy to move all incoming mails journaled.
which one will get apply?
Thanks

Hi chandru CT
Thank you for your question
The transport rule will be applied firstly.
The difference between transport rule and journaling role is that transport rule make the original mail BCC to someone by mail. But Journaling role make the original mail send to someone by attachment .
Jim xu

Calc script, Business rule and business rule macro

Hi John,
Can we use calc script , BR sequence and a BR macro against different databases at a single go.
In one calc script or BR sequence or BR macro itself can i calculate 2 databases

If possible could you not start every post with my name, there are lots of others helping on this forum and they provide excellent answers
Calc Scripts run against one database.
Sequences can contain multiple business rules, in the launch variables you can set the database to run against for each rule (outside of the planning application though)
Macros are called from a business rule and are run against the database the calling rule is being run against.
Cheers
John
http://john-goodwin.blogspot.com/

Co-rellation rule and confirmation Rule

Hi All
Can you please explain me the corelation and confirmation rules???? if possible please write some code for that??
Thanks

Hi,
A correlation rule only the Active Sync attributes for each event.
A sample rule is
    <list>
      <new class='com.waveset.object.AttributeCondition'>
        <s>employeeId</s>
        <s>equals</s>
        <ref>account.badge</ref>
      </new>
    </list>A confirmation rule uses the full view of an IDM user. As a result it is more costly to use.

How to Apply GP India Packages (Rule and Non-Rule) in peoplesoft

Hi All,
Can any one tell describe detailed description about applying GP India Rule packages and Non-Rule packages.
I.e. Import, Compare and Upgrade Rules package AND Import, Compare and Upgrade Non Rules package.
Thanks in advance
Thanks & Regards,
Siva Prasad B

Hi All,
Please upadte it
Thanks & Reagards,
Siva Prasad B

0SD_C03 transfer rule and update rules do not exist in BI Content

I am working on SAP BI 7.0 support level 16 and BI Content 703 support level 9.
I am not finding these objects in BI Content for the Sales Overview Infocube 0SD_C03:
Update Rules do not exist for 2LIS_11_VAKON,
2LIS_11_VASCL, 2LIS_11_VASTH, 2LIS_11_VASTI, 2LIS_11_V_SCL,
2LIS_11_V_SSL, 2LIS_12_VCSCL, 2LIS_13_VDKON.
Transfer rule does not exist for
2LIS_13_VDITM, but exists for all other DS.
7 Transformations exist only for:
2LIS_13_VDITM
Can somone help me out with why this is so? Which datasources are to be used for 0SD_C03, 3.x or 7?
This is an urgent requirement.
Regards,
Sony

Most of the problem has gotten solved by our upgrading to BI Content level 17.
The others, i made a direct mapping of some of the transfer rules manually.
It is working fine now.
Thanks for the replies.
Sony

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

Problem with Settelment Rule for iw32

Hi,
Good day guys
Iam getting the problem while creating the settelment rule creation. Ive got a problem with " wa_srules-SOURCE     = '1' ".
If i wont fill this field, settelment rule is going to be created. but i need to fill this field as per requirement.
Ive got a error message "Enter an Existing source assingment for souce stracutre CS.
Plz any one guide me, how to overcome this prob
DATA: srules TYPE srules_ext OCCURS 0,
      wa_srules TYPE srules_ext,
      lv_mandt type SYMANDT.
DATA IT_OBJNR TYPE STANDARD TABLE OF IONRB WITH HEADER LINE.
DATA: ls_copadata type BAPI_COPA_DATA occurs 0.
DATA: ls_cobrb type standard table of cobrb with header line.
IT_OBJNR-OBJNR = CAUFVD_IMP-OBJNR.
APPEND IT_OBJNR.
break-point.
CALL FUNCTION 'K_SRULE_PRE_READ'
EXPORTING
   I_PFLEGE               = ' '
TABLES
   T_SENDER_OBJNR          = IT_OBJNR
*   T_COBRA                =
EXCEPTIONS
   WRONG_PARAMETERS       = 1
   OTHERS                 = 2
CALL FUNCTION 'K_SETTLEMENT_RULE_EXISTENCE'
EXPORTING
    objnr                = caufvd_imp-objnr
*   FLG_LOCAL            = ' '
* IMPORTING
*   E_COBRA              =
EXCEPTIONS
   RULE_NOT_FOUND       = 1
   OTHERS               = 2
CALL FUNCTION 'K_SRULE_CREATE'
EXPORTING
   i_objnr                   = caufvd_imp-objnr
*     I_CHECK_ONLY_LOCAL        = ' '
*   IMPORTING
*     E_COBRA                   =
EXCEPTIONS
rule_already_exists       = 1
OTHERS                    = 2.
wa_srules-SOURCE     = '1'.
wa_srules-settl_type = 'FUL'.
wa_srules-percentage = '100'.
*wa_srules-amount     = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
wa_srules-SOURCE     = '1'.
wa_srules-settl_type = 'PER'.
wa_srules-percentage = '100'.
*wa_srules-amount     = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
CALL FUNCTION 'K_ORDER_SRULE_ADD'
EXPORTING
    object_no                  = caufvd_imp-objnr
* IMPORTING
*   FLG_RULE_INSERTED          =
tables
    srules                     = srules
IF sy-subrc = 0.
commit work.
Endif
Regards
Edited by: balaji kiran on Mar 26, 2010 10:18 AM

Hello Vitaliy,
Nice to "see" you here
I did try remodelling and it works fine here. A constant value rule really gets a constant value.
The user exit option also works fine here. Here's an example of a very simple user exit for a KF:
method IF_RSCNV_EXIT~EXIT.
FIELD-SYMBOLS: <l_s_old> TYPE ANY,
                 <l_fillfield> TYPE ANY,
                 <l_newfield> TYPE ANY,
                 <fs_kfsource> type any.
* Assign the references to field symbols
ASSIGN c_r_newfield->* TO <l_newfield>.
ASSIGN i_r_old->* TO <l_s_old>.
* We will use the value of the 0AMOUNT KF. The value of the new KF is 0AMOUNT + 5.
ASSIGN COMPONENT 'AMOUNT' OF STRUCTURE <l_s_old> TO <fs_kfsource>.
<l_newfield> = <fs_kfsource> + 5.
endmethod.
For a KF, you can check the fields of the FACT Table (/BIx/Fzzzz) to know the field names for your source KFs.
Hope this helps.

K_SETTLEMENT_RULES_UPDATE the settelment rule

Hi,
Ive created the settement rule. its fine.. if the end user change the Maintenance activity type[cobrb-ilart] in iw32.
the settelment rule should be updated or re-write..
ive got K_SETTLEMENT_RULES_UPDATE. function module.
how to pass the parameters to above f.m. bcoz in my save function exit ive got only cobrb itab data..?
Plz let me know hwo to do it?
Regards
Edited by: balaji kiran on Apr 15, 2010 8:24 AM

Hi Balaji,
I have created WBS elements using BAPI but in tht BAPI there were no fields relating to Settelement Rules.
I need to update Account Assignment category and Settlemnt Recvr Etc.
Can u please tell me how to upload r can u please give me the sample code.?
Thanks in Advance.
Sameer

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Open Interface for Approved Supplier Lists and Sourcing Rules

Hi All,
Is there an open interface or an API available for Appeoved Supplier Lists and Sourcing Rules.
Thanks and Regards,
MPH

Hi sandeep,
I prefer to use the API mentioned.
However this is in Oracle Manufactirung and we dont use that module instead I want to define them in Oracle Purchasing.
can I still do it in Purchasing using the same API.
Further as per the document there are 3 entities
01) Sourcing Rule/Bill of Distribution
02) Receiving Organization
03) Shipping Organization
Do I need to define all 3 in order to make it work?
Thanks and Regards,
MPH

Set up rule and lost mail!

I thought I was doing a 'good' thing when I set up a rule in Mail that said if the email address does not contain my exact email address, please move it to the junk folder. I set it up for both my cable company's email address and for my Mac address. Went back into Mail- all messages gone from both accounts!! Wiped out. So I went back into Rules and removed both rules. The Mac mail reappeared but my cable company emails did NOT reappear. Now I can probably recover them cuz I back up every morning but since the backup this morning, of course I have gotten some emails which did not get backed up. What happened?! Where did they go? Can I get them back? Ugh! Judy

I tried rebuilding the mailbox and that didn't help. Judy

Mail - Forwarding attachments manually and with rules - how do I keep my attachments?

I have the latest updates of Lion on by MacBookPro (late 2010 model). I use mail to receive mail from my business account (Exchange account) and my personal account (IMAP account). Up until this summer, everything was working peachy with the system. I have multiple folders in my accounts and many rules to sort the mail and some that automatically forward mail messages to other people in my office who are also on exchange server.
Since this summer, we really noticed in August, we have noticed that the attachements are sometimes missing from emails I send out either automatically through rules (attachements never appear in the emails on the receiver's end) or manually, sometimes they receive, sometimes they don't (most of the times, but not always, when they don't work, it is a pdf in attachement, although it has happened on occasion with docs and jpgs or other graphics files). The bizarre thing is that on occasion a receiver replies to my email telling me there is no attachement, and although the email I receive doesn't show a paperclip, the attachament is actually embedded in the email!
If I write a new mail, and manually add an attachement, it seems to work.
My IT guy, who runs the exchange server says that it is bizarre because he can see the attachement in my email, but when it is delivered it disappears, but if he opens it at the server, it reappears. He has made all the latest updates and has trolled the support sites, but has found no solution.
I receive a newsletter everyday, which is a rather large 8-10 Mb pdf. My rule tells it to automatically forward to the receptionnist so that she can send it out to her mailing list. The message I receive always has the attachment, but in the forwarded message the attachment dissappears. In this case, when I look at message in my sent mail folder - there is no attachment. I tried using re-direct instead of forward as a rule and it still did the same thing...
I guess I want to know if anyone is experiencing the same issue, and if anyone has any other solutions to make forwarding work better.
P.S. When I use the IMAP account, the forwarding doesn't seem to be a problem, however I can't figure out how I could run a rule for an email I receive on my exchange account so that it forwards via my IMAP account. Also this would not be ideal, as then all my business contacts would get mail from my personal account...
Thanks for any help you could provide.

Uncheck:
But you'll still have to navigate around the icon.

Differerence betwin distubution rules and settelment rule

Similar Messages

Maybe you are looking for