Differnce between GLPCA and GLPCT

Dear Viewers,
Amount in Table GLPCA and Table GLPCT is looking different. Hence in the report display and line item totals are looking different.
Can any one tell me how to correct these discrepency in GLPCT table.
Thanks
Aswin

Hi,
Please, refer to note 180906.
Regards,
Eli

Similar Messages

Profit center data in GLPCA and GLPCT Tables

Hi ,
We are in ECC 6 but with classic GL and profit center accounting.
We have the documents posted with profit center as the assignment object. When i check the documents through document display i could see the profit center in it , but when i execute the transactions 5KEZ , 2KEE i couldnt fetch any data. Actually there is no data updated to the GLPCA and GLPCT Tables.
These accounts are Frieght clearing , benefits clearing etc...
My actual requirement is the ending balances of GL accounts by profit center subtotals/ GL Trial balance by profit center .
Thank you.

Hi
If these are balance sheet accounts, you need to run period end transactions like 1KE* to transfer the balances to EC-PCA
also, Tick the "Online Transfer" in EC-PCA config & Specify these accounts in 3KEH and then post a transaction.... It should get transferred online on real time basis
Br, Ajay M

Differece bet GLPCA and GLPCT in ECC 6 with classic PCA

Hi Ajay and Experts,
Thank you for helping me till now for all the issues in COPC and COPA we are all set.
I found once issue in PCA today as below, can anyone please give inputs.
I have reviewed all the threads but i want to specify my case first.
We are in ECC 6.0 with Classic PCA.
We are using Sales order substituion to get the PCA based on Region.
User dowsnot want to use transactions iKEK etc., for Balance transfers.
We crated on e kind of dummy PCA and assigned in 3KEH so all the balance sheet accounts posting with same.
we are trying get balances from GLPCT.
I observed the line items are getting updated in GLPCA but not in GLPCT, so our report get failed.
Can you please help me as early as possible.
Thanks,
Sudha

Hi,
My problem is resolved.
Actually the values in GLPCA and GLPCT are getting updated as expected.
The problem is with my custom report, i have identified and working with my technical team.
Thanks,
sudha

Basic differnce between 000 and 001 clients.

what is the basic differnce between 000 and 001 clients?
why do we use client 000 as source client while client copy?

Hi Kumar
The basic difference between Client 000 and Client 001 is that Client 000 is client independent instace while Client 001 is Client dependent.
Client 000 is SAP source client while Client 001 doesn't exits for every installation.
Regards
Shashank

Differnce between unicode and non unicode

Hi every body i want to differnce between unicode and non unicode and for what purposes this ulities are used explain me little brief what is t code for that , how to checj version, how to convert uni to non uni ?
Advance Thanks
Vishnuprasad.G

Hello Vishnu,
before Release 6.10, SAP software only used codes where every character is displayed by one byte, therefore character sets like these are also called single-byte codepages. However, every one of these character sets is only suitable for a limited number of languages.
Problems arise if you try to work with texts written in different incompatible character sets in one central system. If, for example, a system only has a West European character set, other characters cannot be correctly processed.
As of 6.10, to resolve these issues, SAP has introduced Unicode. Each character is generally mapped using 2 bytes and this offers a maximum of 65 536 bit combinations.
Thus, a Unicode-compatible ABAP program is one where all Unicode checks are in effect. Such programs return the same results in UC systems as in non-UC systems. To perform the relevant syntax checks, you must activate the "UC checks" flag in the screens of the program and class attributes.
With TC: /nUCCHECH you can check a program set for a syntax errors in UC environment.
Bye,
Peter

Differnce between portal and collaboration

Hi All
What is differnce between portal and collaboration & uses as well?
Thanks in advance
Raja.S

Periodic billing is used when you want to bill the customer at different points of time based on the periodicity or progress of the work. Milestone billing can be used for this type of billing purposes when you want to have billing control from the project.
Resource billing is based on the resource consumption for the particular activities. Dynamic Item Processor (DIP) profile is used for the resource related billing.
Further information acn be had from the link
[http://help.sap.com/saphelp_47x200/helpdata/en/aa/96853478616434e10000009b38f83b/frameset.htm]
Hope this is of some help
Venu

Differnce between MMPV and OB52

Wat is the differnce between OB52 and MMPV,
Thanks
Ramki

Hi Ramki,
This question has been answered already in several threads before.
Please use the search before posting new threads.
Hi Priyanka,
Sam has already answered the question.
Why are you replying with same answer and requesting points for that please do not do that.
Thank you

Differnce Between /n and /BEND

Hi,
Differnce Between /n and /BEND?
thanks and regards
sarath

Hi ,
/n ends the particular transaction .
/bend - This means batch end .
This comes only in BDC concept .This is where you transfer data from the legacy system to sap R/3 system .When you are performing recording process and you dont want to continue any more you give /bend .

Differnce between periodic and Resourse billing.

Differnce between periodic and Resourse billing, and how to do it in sap?..
Can anyone suggest me step wise
Thanks in advance

Periodic billing is used when you want to bill the customer at different points of time based on the periodicity or progress of the work. Milestone billing can be used for this type of billing purposes when you want to have billing control from the project.
Resource billing is based on the resource consumption for the particular activities. Dynamic Item Processor (DIP) profile is used for the resource related billing.
Further information acn be had from the link
[http://help.sap.com/saphelp_47x200/helpdata/en/aa/96853478616434e10000009b38f83b/frameset.htm]
Hope this is of some help
Venu

Differnce Between OBIEE and BO And Cognos

Hi experts.
I would like to know the differnce between OBIEE , BO And Cognos. Is there is any white paper regarding this.
Thanks in advance
Regards
Frnds

Hi Friend ;)
Check out this.. http://www.forumtopics.com/busobj/viewtopic.php?p=543325&sid=21c3e9a1b9dd85679d5e51c335b8a74e
also http://oracle.ittoolbox.com/groups/strategy-planning/oracle-projectmanagement/what-is-obiee-1681803
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Nov 20, 2008 11:52 AM

STO DIFFERNCE BETWEEN UB AND NB

HI all
can someone plz tell me the differnces between po type NB and UB
and y do we use UB for Intra Company and NB for Intercompany
where exactly is the contrl\ol
olz clarify

hi
UB: If the supplying plant and Receiving Plant belong to the same company code. then we use UB document type.
If you use own document type you should ensure transport control field.
NB : If the Supplying plant and Receiving plant belong to different company code then use document type NB.
difference : IF the company need billing document for stock transfer use NB document.
else use UB document for the stock transfer .
regards
murali

Differnce between exception_init and init_exception

I have declared an usernamed exception and wanted to call...
I came to know that these can be called by using two of the below -
Pragma Exception_init
Pragma Init_Exception
What is the differnce between[b] exception_init and init_exception ? And where they can be used ?
awating for your rresponse ..!

Oracle Database 10g Enterprise Edition Release 10.2.0.3.0:
SQL>declare
2     my_exception exception;
3     pragma exception_init(my_exception, -20101);
4 begin
5     raise my_exception;
6 exception
7     when my_exception then
8        dbms_output.put_line(sqlerrm);
9 end;
10 /
ORA-20101:
PL/SQL procedure successfully completed.
SQL>declare
2     my_exception exception;
3     pragma init_exception(my_exception, -20101);
4 begin
5     raise my_exception;
6 exception
7     when my_exception then
8        dbms_output.put_line(sqlerrm);
9 end;
10 /
   pragma init_exception(my_exception, -20101);
ERROR at line 3:
ORA-06550: line 3, column 11:
PLS-00127: Pragma INIT_EXCEPTION is not a supported pragma

Differnce between sync and async webservices

All,
What is the difference between sync and async web services?
Actually i am looking for a web service, which doesn't return a response. is this achievable?
Thanks

SRAVZ wrote:
What is the difference between sync and async web services?from a webservice protocal perspective there is no difference. you still make a request and get a response. the difference is in what the initial response contains. in a synchronous call, the initial response will contain the final result. in an asynchronous call, the initial response will not contain the final result, but may contain some sort of "ticket" which can be used in a subsequent call to get the final result. generally, the client will need to poll the webservice until the final result is available.
Actually i am looking for a web service, which doesn't return a response. is this achievable?it's not really possible to not return any response. http is a request/response protocol. if you don't have any data to return, then the response will be fairly minimal, but it will still exist.
Edited by: jtahlborn on Dec 2, 2012 9:22 AM

Differnce between requestor and preparer

Hi,
Can u please any one give the description of purchase requisition details.
I have one doubut how to find the requetor and preparer of perticular requisition ,where is stored in data base.
what is the derfernce between requestor and preparer.
i know only preparer is nothing but buyer hwo ever create the requisition it is stored in po_requisition_headers_all column as preparer_id,\
But i don't know what is requestor and where it is stored.
Thank's

Preparer id is at the req. header level. It is the employee id of the person who actually types in the req.
Requestor id is at the line level. It is the employee id of the person who actually requested the material.
In a lot of companies, a manager will request material but his admin will type the req. Here the manager is requestor and the admin is the perparer.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

Differnce between jre and container

This may be a silly question, but i want to know what is the difference between jre and a container?

gtkrish wrote:
yes i am specifying about containers like sevlet container , it also does the job of executing code,right?No. The JVM is executing the code (insofar as the JVM ever actually executes anything). The container simply manages some of that code for you, and provides services to your code, such as JNDI

Differnce between GLPCA and GLPCT

Similar Messages

Maybe you are looking for