Difficult with different coding masks for operative and std templates.

Hi Experts
I have below coding masks
OP-XXXX-XX-XX For operative structures (not allowed for std templates)
ST-XXXX-XX-XX For std tempplates (not allowed for operative structures)
But i am unable to create operative project using std template.
I have disabled Lck for std mask and tried, then i could create project but the operative project got created with WBS element's short id 'ST' and not with 'OP'
How to ensure getting the right WBS id while copying from different standard coding mask?
warm regards
ramSiva

Hi Ahmed
I have gone through help, but i did not get any clue to make use different project IDs for std and operative.
I am just looking for this to have dedicated structures for both std and operative, due to which one can easily recognise the nature by seeing the project id.
Of course, it is very comfortable using unique project ID / coding mask for both. Still i am exploring. You may suggest if feasible.
warm regards
ramSiva

Similar Messages

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

Dedicated coding mask for standard template.

Hi Experts
I wish to maintain coding mask for: various varities of projects like:
1) PP/00000-00-00-00
2) PS/00000-00-00-00
3) PA/00000-00-00-00
To have the template functionality also in place, please suggest which of the following is best?
1) The above coding masks are allowed for both operative and standard. It means, the number series contains mix of both std and operative projects.
2) To have a dedicated coding mask ST/00000-00-00-00 which will be a common standard template for creating Operative projects using the above masks. I am still having doubt since i could not test this as the existing system coding masks not allowed for modication.
I request the experts, to suggest a best practice in this regard.
warm regards
ramSiva

The number series will not contain the mix of both operative and standard structures as you have mentioned in point 1. Please check.
As for point 2, Kabir is right. Create a new mask for standard structures and lock it for operative projects.
Regards,
Ajinkya
Edited by: Ajinkya Vaidya on Oct 30, 2009 6:08 AM

Different material number for SD and for PP MM

Hello
Does sap provide a functionality to manage different material number for SD and for PP MM:
We produce and stock material A . We want to be able to sell material A and B. For MM (stock) and PP, B = A but for reglementation, we need to print on the delivery document caracteristics stored at the material level.
We don't want to substitute B by A on the sale document and we want that the stock of A beeing reduced by sales orders of A and B.
Thanks
Simon

Simon,
Iu2019m not aware of any way to manage the same thing using one material number in MM/PP and a different number in SD.
What makes B different from A? From your description it sounds like itu2019s the same thing with different characteristics. Without more info itu2019s difficult to offer solutions to your problem but Iu2019d start by looking at classification and batch management so you can differentiate differences between materials based on characteristics captured at the batch level.
If you provide a little more info about the products perhaps I can help.

Different Ringtone Notifications for Text and Email

I would like to assign different ringtone notifications for texting and email, and if possible, different ringtones for each of my two email accounts. I need to see texts immediately, but not emails. Am picking up the phone 50 times a day so I don't miss a text, critical to my work. Could do this on Bb Storm, but can't figure out on Incredible. At a minimum, I would like to shutoff notification for email, and just get pinged for texts. Thanks!!

valniemiec wrote:
I would like to assign different ringtone notifications for texting and email, and if possible, different ringtones for each of my two email accounts. I need to see texts immediately, but not emails. Am picking up the phone 50 times a day so I don't miss a text, critical to my work. Could do this on Bb Storm, but can't figure out on Incredible. At a minimum, I would like to shutoff notification for email, and just get pinged for texts. Thanks!!
Well,
The default notification tone that you set in the Settings->Sound is for the default tone in the generic e-mail account and all other notifications. If you use the Gmail client, you can set your own personal ringtone in it's settings (Menu->Settings). In the messaging Application you can also set a custom notification sound from there as well (Menu->Settings)
As for different e-mail accounts using the same e-mail application, I don't think that is possible with the in stock app...tho I am not totally sure I haven't use it like that before.
Hope that helps!

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

Use different email address (gmail?) just for FaceTime and Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

Does LR handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?

Does LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10. Does any have any idea?
Thanks

Moreover, the two monitors can have completely different characteristics. As always, you really need to calibrate/profile any monitor (with a hardware tool - Spyder, Colormunki etc). That's no more important with two monitors, but you see for sure if you don't, as two dissimilar monitors will then probably look different.

My iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

How to auto-detect a baud rate on UART or Serial port. and how to handle different baud rates for Transmission and Reception

Hi,
Till now i have used only single baud rate for opening a port, writing some stuff and reading back from other end. This time requirement is little different, can SerialPort class
be used to have different baud rates for Tx and Rx, I have not seen that in the msdn, but any other ideas also welcome!!!. I am experimenting!!!

When I look in the Info.plist file for the AppleUSBCDCDriver kext, which is what the driver should be for a USB modem, there are three driver personalities listed: DeviceClass = 2, DeviceProtocol = 0, DeviceSubClass = 0; DeviceClass = 2, DeviceProtocol = 0, DeviceSubClass = 2; DeviceClass = 2, DeviceProtocol = 1, DeviceSubClass = 2. When I look at the info for the Phone with USB Prober, the class, protocol and subclass are all 0 and it is assigned to the AppleUSBComposite driver which appears to be a default when it doesn't know what else to use.
Does that information come from the phone or is it assigned by the Mac? I'm wondering if the Mac doesn't recognize the phone and is assigning default values, or if the phone is responding with the wrong values causing it not to be assigned to the right driver. Are there other USB utilities out there which could possibly configure the phone's USB port to identify itself correctly?

Is it possible to have different pricing procedure for SO and invoice?

Hi,
Is it possible to have different pricing procedure for SO
and invoice?

Hi Kiran35086
--Yes you can have it.But it is based on the business requirement
--Create 2 Document pricing procedures & assign one in VOV8 & another in VOFA
--In Sales Document VOV8 you maintain different document pricing procedure Ex A
--Go to VOFA & select your billing document type in Account assignment/pricing assign the document pricing procedure.EX- B
--Create condition records in VK11 for the condition types which are included in the pricing procedures
--Maintain pricing procedure determination in OVKK with 2 different Document pricing procedure & save it
--When you raise SO in VA01 you will find one pricing procedure & when you raise billing in VF01 you find another pricing procedure in conditions.
Let me know if your problem is solved
Regards
Pradeep

Different Bluetooth connections for phone and music streaming

Can I have different Bluetooth connections for phone and music streaming functions on my 4s? If I can is there a way that the will automatically select (remember) the proper bluetooth receiver?

TDMA interference, and is a type of RFI (Radio Frequency Interference) unique to GSM mobile phones. It affects all GSM mobile phones, but is not harmful to you or your electronics. It is just an audible indicator of network activity.
GSM mobile phones generate this interference when they communicate with the cellular network. You don't need to be actively using the phone, as it constantly accessing the network to check signal strength, synchronize the clock, or perform other network-related tasks. The only way to stop this interference is to turn off the phone or its network capabilities. For example, by using Airplane Mode.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG ‏101 KB

Hi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri

Difficult with different coding masks for operative and std templates.

Similar Messages

Maybe you are looking for