Difficulties with auto capitalisation and autocorrect in these forums

I don't know if it's caused by my recent upgrade from iOS 7 to iOS 8.1 or changes made to these forums, but I'm now having trouble with autocorrect and auto capitalisation when I'm typing in the message text box.
Often when I start a new paragraph, it doesn't automatically change to uppercase. If I change to uppercase manually, it doesn't automatically change back to lowercase for the following letter.
If I make a mistake and delete a letter, the autocorrect suggestions behave as though the letter is still there when I continue typing.
I only see this behaviour in this forum, not on other websites and not in any other apps.
Anyone else?

pshute,
pleas give us your iDevice details so that we can get this question moved to that forum for folks eyes that may have seen this misbehavior.
1st, I see no change made here... looks and acts as I expect. My guess is that your update to iOS 8x is the culprit as there are many folks that have experienced anomalies after their upgrade/update.
Let's test... [I am on a desktop Mac running Firefox browser with no special preferences set for auto-correct or auto-CaPiTaLiZaTiOn]
As a rule, I get NO auto-cap (like in Microsoft products) - known names, the personal noun " I ", beginning of new paragrahs <-spelling mistake is on purpose**
for example... no shift key for a bit. james brown was faomous for screaming 'ow1, i feel good... i knew that i would'. lady gaga wears a meat suit
i wil now take a screengrab for an example of what I see when composing. all spelling mistakes and capitalizations (or lack thereof) here are intentional (apparently, my dictionary doesn't recognize the plural form of Capitalization) -- all 'AUTO' stuff has 'red-dot underlining'
CLICK to enlarge
ÇÇÇ    

Similar Messages

  • In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

    Thank you, that was perfect!
    Yoni

  • Rotoscoping with Auto Trace and the Hold Keyframes it produces

    I was looking at the masks that were created with AUTO TRACE and noticed that they are all with HOLD keyframes.  I had used Hold Keyframes only on the mask opacity but not on the Mask Path...is this the better way to go - with hold keyframes for Mask Path.  I toggled between Hold and Linear but can't see and difference

    I toggled between Hold and Linear but can't see and difference
    You'd only see a difference, when you use motion blur (a lot of it). Else the areas inbetween the keyframes do not figure into the equation and thus the visual result is the same.
    Mylenium

  • LOV with auto suggest and multiple check boxes

    Is it possible to implement LOV with auto suggest and multiple check boxes using ADF faces components?. Any alternative implementation/pointers are appreciated.
    Regards,
    Surya

    Hi,
    build it yourself as a task flow opened in a popup. see: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/69-custom-lov-with-btf-276178.pdf
    Frank

  • Appropriate component with auto complete and list of values

    Hello,
    I am using Jdev 11.1.1.6.0 with ADF BC and ADF Faces as technology stack.
    I have a use-case and right now struggling to find the appropriate component/implementation for same. The requirement is:
    1. User should be able to type and tab out to auto complete with perfect match.
    2. Not all users are expert so they should be able search and select the items from list
    3. Minimum key press should be there. E.g. auto complete should require only one tab press to complete and go to next field
    inputComboboxListOfValues fits most of above except #3. One tab simply selects the item from list and second tab is needed to move out to next attribute. Is there a way to force one tab to auto-complete and move out to next attribute?
    Tried simple inputBox with autoSuggest behavior but it lacks in opening of search and select feature that LOV component provides. Another drawback is that you need to wait for auto suggest list to appear and select before moving out to next attribute.
    This is needed on a very highly frequent used screen, so no speed and key press compromise is expected. Most users are expert and they know the code, so just type and tab out is expected but at the same time if typo happens and code does not exist in valid list then pop-up should appear to search and select.
    Is there a way to achieve this in ADF application (this is very well implemented in Oracle Forms application)?
    Any help is highly appreciated.
    Thanks,
    Jai

    Hi Frank,
    I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
    Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
    Thanks,
    Jai

  • Since IOS 6 update, malfunction with auto rotate and sounds

    Hello. I'm wondering if others have experienced a problem since updating their IPads. Since the update, I've lost the dual functionality of auto-rotate and sounds. I can only have 1 of the functions operate as per norm.  If I want sounds (for keyboard clicks/games/etc.) my screen will not auto orient. Vice versa for auto orientation. Normal rotation is only possible with NO SOUND for the previously mentioned apps. I've performed reboots, and also endeavoured to make the obvious corrections in the General Settings fields. When I uncheck "MUTE"...it automatically places a checkmark in the lock rotation field!!!
    Can anyone offer a solution, to what i perceive, as a software issue?

    Maybe this will help.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Difficulties with movie clips and frames

    This is really irking me.
    I am extremely new to Flash so please bear with me. I am assuming that this is a simple, easy to fix problem that I am having. I have Adobe Flash Professional CS5.5.
    What I am trying to do is display a sequence of images after other movie clips stop playing.
    The image sequence itself does what it is supposed to and works properly, and the other movie clips also are successful. However, whenever I try to put the movie clips for the images in frames or keyframes, the beginning movie clips only play part of the way before the images show up. This happens even though the images' movie clips are on frames/keyframes (I've tried both) after the other movie clips.
    The movie clips that are supposed to play first are each on a separate layer and there are two of them.
    The first layer is called "tree" and the second is called "text"
    The tree layer has a 45-frame gif animation that I have turned into a movie clip. I have created a motion tween and changed its alpha so that the gif has a fading in and out effect. I also have it so that it stops replaying once it reaches the last frame. I am using stop(); for this.
    The text layer has a 40-frame gif animation that I have also turned into a gif. This gif is also a movie clip and also has motion tween. Its alpha has also been changed.
    Both tree and text play together successfully and how I want them to.
    The sequence of images is three separate images, each a different layer, that fade into eachother. These images are pngs, therefore they aren't gifs nor do they have their own frames.
    The bottom layer is called floor1 and has frames 1 through 50 of motion tween and alpha adjustments fading the png image. The image is a movie clip.
    The layer on top is called floor2 and has frames 51-100 of a different png image fading.
    The very top layer is called floor3 and has frames 101-150 of yet another png fading.
    The images are successful in doing what they are supposed to.
    Layers tree and text are one fla file, and layers floor1, floor2, and floor3 are a separate fla file.
    When I copy the frames from layers floor1, floor2, and floor3 into a keyframe after layers text and tree, they transfer properly, but when I test the animation, the image sequence shows up a lot sooner than it is supposed to, interrupting the movie clips on the layers text and tree. I have tried moving the floor# layers' keyframes farther down the timeline, but then the other movie clips just stop.
    In the fla file with layers text and tree, I've imported the gifs into the library and then put them onto the stage.
    In the fla file with the floor# layers, I've imported the pngs into the stage.
    Here's what the text and tree layers look like:
    Here's what the floor# layers look like:
    The rest of the frames for the floor#s...
    So, I thought that the problem was that I needed to delay the image squence. I looked around and found no code or anything for that..
    Afterwards, I thought that it was because I had imported the tree and text gifs to the library before putting them on the stage.
    I opened a new fla and imported the "tree" gif straight to the stage.
    I figured that this should work because then it would show each of the individual frames in the movie clips, which it doesn't do in the above pictures. By importing the gif like this, it does show the individual frames. I've tested this with the image sequence and it works fine. But I have a problem with this method too..
    I select all of the frames for the gif to convert into a symbol, so I can add a motion tween and mess with the alpha. However, only the last frame is converted into a movie clip. Well actually no... Only the circled frames below are turned into the movie clip. Even when all of the frames are selected.  This isn't very helpful because then I can't change the alpha for the entire gif nor can I create a motion tween without getting a message saying that the motion tween could not be applied to all of the frames.
    Here's what this version of "tree" looks like.
    And the frames continue like so until 135.
    The frames that are turned into the movie clip are circled below.
    If I can solve the issue that I'm having with the tree shown in the two pictures above this sentence, then I can display the movie clips and image sequence without a problem. It wouldn't be quite how I had intended it to be, but it would be successful and would still work.
    If I can fix the problem with the image sequence showing up to early, and of the tree and text movie clips being cut off, then this project would also be successful and it would be how I had wanted it to be.
    If you need clarification, let me know and I'll explain something better.
    I am not willing to provide a download link in this forum for my fla files, but I can email them to you if you would like a look. I just don't want someone to be able to find them and take them by doing a google search.
    I have uploaded two swfs though.
    The first is of the tree and text layers/movie clips working as they are supposed to. The second is of the image sequence (floor1, floor2, floor3) doing what it is supposed to.
    Text and tree: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg1.swf
    Floor1, floor2, floor3: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg2.swf
    Notice how at the end of the text and tree swf, when the text stops the thing in the background keeps flashing. If that can keep flashing WHILE the images appear, then that would be great.
    TL;DR: I want the floor# flash to show up after the text and tree flash but I keep having problems and nothing I try is working properly.

    Very concise question, appreciate the screenshots. One thing that motion tweens don't always show very well is keyframes. Let me clear a few things up and see if it helps.
    Go back to what you wanted to do originally, which is copying the frames from one document to another. This is perfectly fine and to clear it up, it will also copy any library elements (images, clips, etc) that are required to copy those frames for you, so you do not need to import them yourself.
    To successfully copy frames (not symbols), select the first frame of the frames you want to copy, hold shift and select the last frame (alternatively double clicking anywhere in the blue motion tween should select it all as well). Now right-click and "Copy Frames". Now go into your new document, select a frame, right-click and select Paste Frames. You will see the same frames copied over, the blue representing the tween and keyframes came with it and you finally will notice all your images/etc were copied into your library.
    Now is a good time to manage the library clutter that was just copied in, if you're a clean freak like me.
    This process is the same, as you tried, for the other documents you want to copy in. If any resources match in name then Flash will ask you if you want to "overwrite" that library item. If you do that,  you will break one of your previous animations. Make sure that's not the case.
    The common gotcha here is not knowing how to slide frames over properly. If overwriting isn't the issue, this is what I suspect your problem is and as you expand/contract the timeline the keyframes aren't going with you.
    For example if I import 2 clips with fade in/out and move keyframes as you did I'll get something like this:
    Now moving them over I would be very careful to select all of the frames I want to move via the methods above. Click the first frame, hold shift and select the last frame, or double-click anywhere in the middle of the blue. The selection of frames:
    Now I simply drag my selected frames to the right, notice the keyframes stay as they should (the black dots):
    The animation plays as expected.
    Lastly I'm not sure if you've ever used the panel but you should really get used to the Motion Editor. This gives you control over easing as well as shows you an in-depth view of the keyframes that exist in a selected motion tween.
    At first this panel may look complex but it simply represents the basic properties you can animate. Any more properties you animate can be added in here. I moved the X, Y and Alpha properties of my object. So you can see over the frames 30-60 what I did. You can also adjust basic easing here.
    If your animations don't look correct you can select a motion tween, open the motion editor and verify the keyframes look correct. Scrub the timeline and look at the values you're interested in. Alpha for example, for you.
    If you don't see any keyframes when you scrub the timeline, you moved your frames over incorrectly and the keyframes probably exist in a different place and therefore it appears incorrect.

  • Connection difficulties with Lumia 800 and CK 100

    I have a Nokia Lumia 800 and an installed CK-100 car kit, the kit has been professionally installed and works as it should do ie it is switched on with the car ignition and can be paired with both my Lumia and my partners Samsung via bluetooth.
    The problem I am having is the car kit keeps connecting with the phone resulting in two beeps through the speakers as it confirms it has connected both the phone and player function.  This repeats every 1 minute and is very frustrating.  It does this almost non stop although some times after about 10 -15 connects it suddenly disconnects.
    I have found a way to stop this happening, but it is not ideal and certainly not how a hands free kit should be, as follows;
    Set the Lock function to its max setting (5 minutes) and tile to the Bluetooth screen, then by constantly touching the screen every 5 mins to keep the Bluetooth settings screen open it works.
    I have sent two emails to the Nokia help centre (both times it is clear that they do not understand the questions) and have phoned the help desk twice, on one of the occasions the help desk person told me to reset the phone (which clears all your setting, Apps etc) and it worked fine for 4 days then started as above.
    Anybody got any ideas? to me it looks like the bluetooth setting is doing something when it is in sleep mode.
    Regards
    martyn

    Check whether you may have use your Lumia 800 on another PC initially so it has it's primary sync relationship with that PC.
    When you connect your Lumia with your PC and Zune starts select 'phone' and verify the sync relationship which is shown below the phone image. If this says 'guest' you will have to click 'Change Sync Relationship' to move it to the PC you are using.
    On any other PC you can remove the phone from the list of know devices through Settings>phone>sync options and click 'forget this phone for each phone you wish to remove. If multiple phone are known to this install of Zune you will see left and right arrows besides the phone image with which you can select the phone to change settings for.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • I have followed all the steps to fix this problem, but I do not receive texts on my new Galaxy 4 from iPhone users.  I tried everything I was told and found in these forums.  Still no luck.

    I switched to Verizon in March 2014, from AT&T.  I traded in my old iPhone4 for a Galaxy 4.  Ever since, I am not getting text messages from anyone who has an iPhone unless they WORK for Verizon.  I have deleted my phone from my apple profile and I don't own any other apple products.  I switched to an Android because I was tired of Apple's proprietary ways.  It seems not matter what I do, and I have done EVERYTHING suggested here on these forums.  No luck. I am so frustrated.  I have a very large family and almost everyone else has an iPhone.  Even if they don't, I am not getting all their messages.  I like the new Galaxy, but believe I have made a huge mistake switching carriers and phones, even though I hate Apple products.

        Welcome to the Verizon family irishlass82! I know how important it is to stay in touch and we'll make sure that you don't regret your decision! Before trading in your device, did you turn off iMessage? In effort to correct this issue, text the word STOP to 48369.
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • How to handle security with Auto-Versions and Time Machine?

    I've upgraded to OS X Lion, which of course now has the new automatic "versions" system.
    Today, I created a text file in TextEdit, containing highly sensitive data that I must keep absolutely secure (well, you know -- as best I can.) The file was eventually copied to an encrypted sparse disk image (.dmg) and the original on my desktop deleted trashed and emptied.
    But before that happened, Lion had already saved two copies of the file through the new versions sytem --and-- one copy in regular old Time Machine! So much for keeping the file secure. (OK -- not "copies" but delta data. Whatever. )
    EDIT: OK ... I found how to "Delete all backups ..." from within Time Machine. (I feel silly for not finding that before!) But the real question here relates to manual and auto-save versions from the likes of TextEdit and any residual data that may leave lying around, despite the file seemingly having been deleted.
    My questions should now be fairly obvious ...
    Does "Delete all backups" from within TimeMachine also delete all data from the "versions" system? One would assume so. But I don't like to assume.
    Can one somehow pre-emptively flag a file to not be recorded by versions or Time Machine?
    Someone in some post noted that a file could be "locked" to prevent these issues altogether. But I can find no informtaion about such a thing, either by further googling or poking around in menus locally.
    EDIT: Good grief! You spend ages trying to find something, then you post on here and it magically appears. You can click the title bar of TextEdit to produce a pull-down (that's new!), which shows an option to "Lock".
    So this one is just about answered by myself -- except for the part about whether "version delta" info is also removed when "Delete all backups" is used from within Time Machine.
    Any help will be much appreciated. Thanks.
    Bryan.

    If you're dealing with highly sensitive data, you should enable FileVault on your primary and backup volumes. That's the only way to ensure that all copies of your files will always be encrypted. Needless to say, you have to be very sure you won't lose the password. Optionally, you can store an alternate decryption key on Apple's servers, but then you have to trust Apple.
    That said, in my opinion it's too soon after the release of Lion to trust FileVault completely.

  • Question on router connecting extender with auto config and upgrading firmware

     Hello I have a question regarding my linsys 160n and my wre54g extender. I am going to reset my linsys 160n with dd-wrt on it to the factory defaults, then set it up but leaving the security disabled to then setup my linsys wre54g extender since it has the auto configuration option. Once i have this completed would i be able to then enable the security on the router and the extender?
    Also, just noticed that when i flashed the firmware from original to the dd-wrt i did not reset the router or reset to defaults before i upgraded the firmware to dd-wrt. Will this have issues for me? I thought i read you are supposed to reset or set to factory defaults before flashing firmware to dd-wrt

    The best way to configure your WRE with your Routers Secured Wireless Network... Once you secured your Wireless Network on your Router..... Connect the WRE to the Router using an Ethernet Cable.
    Hardwired anyone of your computer to the Router.... Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240 and press Enter...Leave Username blank & in Password use admin in lower case... 
    Once you login to the WRE setup page, you need to match the Wireless Settings which you have input on your Router... Once you configure all the settings on WRE... then unplug the Ethernet Cable from WRE and then unplug the Power from WRE.... Wait for 30sec and then re-connect the Power to WRE. One both the Lights are Blue on WRE, these means your WRE is configured properly and ready to use. 

  • Why can't I open ccitt g4 compression tiff files with ps6? and could open theses same files with ps3?

    Why can't I open CCITT G4 compression , TIFF format files with PS6?  I used to open these same files with PS3.   Can anyone help me out with this????

    This is what I get when trying to open ccitt G4 compression files. Tiff format.   Thanks for trying to answer my question and Problem.  I found a site where supposedly I can download a plug in into photoshop 6 that will open the files.  don't know if it will work but am gonna try it.

  • Experience with "Auto-Complete and Go-Less Prompts"

    Hi all,
    does anyone have experiences with editing instanceconfig.xml for auto-completing prompts?
    Is it buggy? Or are there any kinds of risks?
    reference: http://www.peakindicators.com/media_pi/Knowledge/oracle%20bi%2011g%20-%20applying%2011.1.1.6.2%20bp1%20-%20windows.pdf
    Please have a look at page 10, it describes how to edit the xml
    Thanks

    Hi Frank,
    I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
    Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
    Thanks,
    Jai

  • IPhone 6 audio stops playing with auto lock and when earphones pulled out

    When playing an mp3 through Dropbox on my iPhone 6, by audio has been freezing when the phone goes into auto lock. It never used to do this, and I don't think I've changed any settings.
    I tried playing music through iTunes to see if it was a dropbox issue. The same thing happens. It also happens if I"m listening through the earphones and I pull the earphones out of the phone. The audio just turns off. iTunes is still open, but it stops playing.
    Does anyone know if this is an iPhone 6 thing?

    hh Darwin wrote:
    Thanks Meg,
    glad to know it's normal.
    So my problem remains with the audio freezing when the phone goes into auto lock then. This didn't used to happen.
    cheers,
    hh
    No, that shouldn't happen. Have you tried resetting your device by pressing and holding the Home button and power button until the apple appears?

  • Indesign Bug with Auto-Size and fitting in Anchored frames

    Hi,
    Steps to reproduce:
    1. Create a text frame with 2 Anchored text frames with the same width.
    2. Make the anchored frames Auto-Size --> Vertical only
    3. insert text to the first frame, when type enter to the next line the frame become higher but the next frame remain in the same position. just after typing the first character in the second line the next frame adjust in the right position.
    4. The same happen when pasting text that make the frame bigger.
    5. The same happen without Auto-Size when fit frame to content.
    Does anyone knows about it?
    Any idea how to bypass?
    Thanks

    This is a user to user forum with "some" Adobe staff participation, report bugs at this link
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

Maybe you are looking for