Difficulty getting Sound input configure and sound input to read more than 2 channels

I need multichannel audio input for my project. I can't seem to read more than 2 channels of my audio interface.
The interface Im using is an Alesis Multimix8 USB 2 mixer and and audio interface. This supports 10 channels in and 2 out. With other software I can read all input channels simultaneously without any difficulty. When I specify the sound input configure and sound input read, to read more than 2 channels any extra channel is a blank signal. Im using Labview 8.5 here.
Solved!
Go to Solution.

Take a look here
http://forums.ni.com/t5/LabVIEW/Play-waveform-express-vi-list-devices-on-front-panel/td-p/1559336
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

Simultaneously read more than one input and generate output

Is it possible To simultaneously read more than one input and generate outputs depending on these inputs? If this isn't possible what is the best way to go about making some sort of timed loop that will read an input, read the next input, decide whether or not to output and so on. Hope someone can help. Thanks.Message Edited by Esmith13 on 05-25-2005 01:36 PM

Hi,
You should look at the synchronized examples for analog input and output that can be found in the example finder under:
Help>>Find Examples>>Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function
These will get you started to being able to handle multiple tasks at the same time.
I hope this helps. Have a Great Day!
George

Sorry if this has already been asked. Just got the newest i-pad had a bit of difficulty getting the charger in and now nothing not charging. HELP

Sorry if this has already been asked. Just got the newest i-pad had a bit of difficulty getting the charger in and now nothing not charging. HELP

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
~~~~~~~~~~~~~~
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Difference between batch input method and batch input recording in LSMW?

hi,
plz tell me the difference between batch input method and batch input recording in LSMW?
thanks & regards
Ruban

Hi Ruban,
The main difference between the two is in lsmw we can view the code status at any time just by coming to prvious steps, but whereas in batch input method unless the recording is finished we cant view the code.
second diff is tht we need to do lot of coding in batch inptu whereas here in lsmw we need not do much coding and mapping to data.
third diff is that batch input is both inbound and outbound where as lsmw is only inbound.
hope u got the differences.....
Regards,
sana M...

Difference between batch input method and direct input method in LSMW.

Hi all,
what is difference between batch input method and direct input method in LSMW. are they same?if differences are there tell me with details?

Hi,
Here are few differences bw Batch Input and Direct Inputs methods.
Batch Input: Uses classical BDC approach, but doesn't required an ABAP program to be written to format the BDC DATA. The user has to format the data using predefined structures and store it in a flat file. Yet it is a slower updation method.
Direct Input: Works similar to Batch Input programs. The difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. Much faster and suits for large volume of data.
Thanks.
DhanaLakshmi M S

Since I updated to IOS 8.1 yesterday my sound is garbled and sounds like it's in a tunnel. What can I do?

Since I updated to IOS 8.1 yesterday my sound is garbled and sounds like it's in a tunnel. What can I do?

That's because there is no supported way to downgrade the iOS. Further, discussion of such is prohibited here, by this forum's terms of use.
You'll have to go elsewhere if you want to go down this route.

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

Join configuration cannot be resolved. Reason :more than 1 of the detail .

Hi Guys,
I am getting a following error while opening a discoverer report.
Join configuration cannot be resolved. Reason :more than 1 of the detail folders uses non-aggregated items .I know this error is regarding the fan trap.
The report is built from 5 folders(Complex & Simple) and a custom folder.I have 3 more reports which are using some of the simple folders from these 5 folders and are joined with other folders with the appropriate joins.
Is this the reason I am getting the error ?
Appreciate your help !!
Veejay

Hi Veejay,
is it that the columns which I am using should be at same levelNo, not really. A item that has a data point property means that Discoverer knows that the item can be aggregated in a report. So if you include detail (i.e. non-aggregated) data points into a workbook from 2 detail folders then Discoverer will generate a fan-trap error because the workbook is not aggregated correctly.
Let me try and give you an example. Suppose we have 3 folders; A, B and C. Folders B and C are detail folders of A. Now support A has one row; folder B has 2 detail rows to A and folder C has 3 detail rows to A. Now if you create workbook selecting items from A and aggregate (e.g. SUM) items from B and C you will get 1 row containing the SUM from B and the SUM from C. Similarily, if you select the detail data point from B and the SUM from C you will get 2 rows containing rows from B and the SUM from C. However, if you select detail data points from both B and C you will get 6 rows in the report and Discoverer will generate a fan trap error because the number of rows do not relate to any one table. But, if you change the join from A to B to be a 1 to 1 join then you will still get 6 rows in the report, but Discoverer will not raise a fan trap error because Discoverer thinks the number of rows returned is in from table C because you have said that there is only 1 row in B for every row in A.
Rod West

Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.

HT2472 I must have done something inadvertently and now if I have more than one application open the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

Hi Jan, Almost sounds like Expose or Spaces....
http://support.apple.com/kb/HT2503

HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!

It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

Hmmmm.
If you reset the AirPort Extreme by holding in the reset button for 9-10 seconds and then releasing, the AirPort should be back in default settings which would allow mutliple computers to connect to the LAN ports on the AirPort.
Power off the cable modem for now and leave it off at least 15 minutes.
With the AirPort Extreme still powered on, hold in the rest button on the back for 9-10 seconds and release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking abmer light.
Then, power off the AirPort Extreme.
Check to make sure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme.
After the modem has been powered off for at least 15 minutes, power it up and let it run for 5 minutes by itself.
Now, power up the AirPort Exteme and let it run for 2-3 minutes
Open Macintosh HD > Applications > Utilities > AirPort Utility
Connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Express
Click on the AirPort Exteme, then click Continue to follow the guided setup tp configure the AirPort Extreme. You can use the same wireless network name, password, etc that you used before, or set up a new name and password, etc.

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

My iPod touch is downloading and updating apps very slow more than an hour.

My iPod touch 4th gen 32gb verson 4.3.1 is downloading and updating apps very slow more than an hour. I just got it a day ago and I backed up all my apps music and pictures and videos from iTunes. Few months ago I had an iPod touch but I lost it and it was working fine. Luckily before I lost it i backed up everything to iTunes so now everything that was in my old iPod is now in my new iPod. Anyways, When I first bought it I straight away backed up everything and saw that i had many updates on my apps. I started updating it all at once but even the first one was not loading at all and mty ipod was hanging many times during the updates so i cancelled all the updates. i even tried it on my computer and it was taking forever but my laptop does updating and downloading apps slower than my ipod so that doesnt matter. Even when I download an app on my iPod now its take more that an hour. So i was wondering, is my iPod slow cause I backed up too many things when i just got it . I have about 120 apps 150 plus photos and 70 videos and I backed it up all in one night on the day i got my ipod. So now I'm restoring my iPod and updating it to IOS 5 and see what happens. Hopefully it will be faster then but I still need to know what is main problem of m iPod hanging and slow updating/downloading. Need a reply ASAP. Thanks

Still you can switch it off while syncing.
You can also do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)

Difficulty getting Sound input configure and sound input to read more than 2 channels

Similar Messages

Maybe you are looking for