Difficulty with HTTPS URL monitoring using GRMG Lite

Hello,
I am getting error when i use GRMG lite scenario which is HTTPS URL. The error that i get is 'Reason for HTTP POST failure:No error message returned' when i start my scenario, and scenario failed. Could you please help me?
Thanks a lot
Venky

Hello Venky
I have the same problem
Could you solve this in the meantime?
Thank you
Theo

Similar Messages

How to implement health monitor using GRMG?

Hi,
I want to configure the health monitor of a big-ip (F5) load balancer, so that it does only forward requests to a netweaver cluster node, if that is fully up and running (incl. KM, Portal and WebDynpro). The big-ip can only send simple (unauthenticated) http get requests and parse the response for a contained string. I thought, GRMG's heartbeat would be a good approach to do this. I can't find any documentation or examples on how to use GRMG without CCMS. Is there some API to send GRMG requests and process the results? How does an GRMG request look like, exactly?
Best Regards,
Jörg

Finally I found the answer in [Enabling Generic Request and Message Generator Heartbeat Monitoring|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a3a190-0201-0010-4984-b4fd369bb35f]. A GRMG request is a HTTP POST request that contains the XML section of a scenario from the curresponding grmg-customizing.xml file, which is for example:
<scenario>
     <scenname>Demo</scenname>
     <scenversion>010</scenversion>
     <sceninst>100</sceninst>
     <component>
          <compname>TestWeb</compname>
          <compversion>001</compversion>
          <property>
               <propname>url</propname>
               <propvalue>http://...</propvalue>
          </property>
     </component>
</scenario>

Catalog Manager not working with https url

Hi,
On the BI server, we had to implement SSL and now I do not seem to be able to connect to the catalogue manager.
The connection to the BI User interface works fine with https, it is only the catalogue manager that shows this error:
Unknown connection error: sun.security.validar.Validator.Exception:PKIX path build failed:
sun.security.provider.certpah.SunCertPathBuilderException: unable to find
valid certification path to requested target
Thanks and Regards
G.

Hi,
Try to connect the catalogue manager by using below kind of URL.
e.x:
http://IP:9704/analytics/saw.dll
Thanks
Deva

SOAP receiver channel with https url

Hi All,
We are working on SAP PO 7.4. We have RFC to SOAP scenario. To connect with external target system we are using https url.
We don't have any sign, encrypt requirement, do we still need to maintain certificates in Key Store as we are using https?
Thanks
Shivi

No.you don't have to select that option.
But you have to install the certificates.
Below one can help you.
How to Enable SSL certificate at the receiver SOAP Adapter

WSRP Provider reg not working with https url

Our portal is configured with https, listening to a virtual host (https://portalpilot:4443)
In order to consume WSRP / JSR168 java portlets we
- created a new OC4J container (wsrp_dev)
- installed the portlet-container ( $MIDTIERHOME/j2ee/wsrp_dev/ java -jar wsrp-install.jar)
- started the container & deployed the samples
all OK
but when trying to register the (tested & OK ) url https://portalpilot:4443/portalapp?WSDL
in the Provider Registration we got an error (error in provider url)
changing the url to the non-ssl host (http://gogol:7777) was the (pseudo) solution.
is this behavior by design? we would like to use SSL throughout

OOS,
Did the info in the release notes solve your problem?
It seems to me that the release notes address a similar but different issue. You want to run under https. The release notes are instructing you to change all references to https to http in the WSDL file. I don't see how this would fix the problem of trying to register a WSRP provider with a WSDL URL that uses https.
The reason I ask is because I am encountering the same problem.
Thanks.
Message was edited by:
user571987

Download URLs doesn't work with https url's?

I've setup a simple workflow to pull manuals from a local library. The script looks like this:
Get Current Webpage from Safari
Get Link URLs from Webpages (Only return URLs in the same domain as the starting page unchecked)
Filter URLs Entire URL ends with .pdf
(stepping through it the correct files appear here)
Download URLs
In my practice run, with only 2 pdfs, nothing gets downloaded. I then go to a regular non https website and use the same workflow to download images, exchanging .pdf for .jpg in the filter.
Is it https that is preventing the download?

I think I can confirm that *Download URLs* will not work with https: links. The same library had some files linked with http: and the workflow had no problem with those.

Wiki Editor fails with HTTP 501 when using certain tags

Hi together,
does anybody know where I can find a list of syntax elements which are not allowed in the SDN's Wiki editor (and also the Forum editor)? This is, what I found out:
<s c r i p t>
t y p e (as an attribute)
o n l o a d (as an attribute)
Apparently, those are prohibited to prevent XSS - if you try to save a Wiki page including a code snippet with the mentioned syntax elements, the session is ended with HTTP 501 ( Method not implemented'.
Thanks,
Felix
Edited by: Felix Hoefer on Jun 29, 2011 1:50 PM

Thanks for your reply. I did read the article and addressed that issue in the first part of my previous post. I don't think that the website where I am hosting my CRL has directory browsing permissions or that I have the ability to set them but the
point of my question was everything works using that same public website when I use a standard CA to create my certificate but does NOT work when I create the certificate using an Enterprise CA.
Rod
Rod Miller

Trying to connect my Macbook Pro with an external Monitor - Using VGA - DVI

Hi Everyone..
Please dont classify me as dumb but every-time i need to connect my MBP to an external monitor or projector i cant
It just doesn't work... I plug it in using all the right connectors - DVI-VGA or the other way around... Anyway - i get a blue screen which tricks me... =]
After the blue screen i go straight to the page i was on before connecting the monitor...! =[
Anyway.. are there any settings i need to adjust.... =]
If there is anything that you guys know of please inform me because i am in need to use a Monitor frequently but so far i havn't been able to do it seen as though i don't know what to do.. Ive watched tutorials and have done exactly what they've told me but it still wont display anything on the external monitor. Ive used 2 MBP's - Both i've had issues with connecting them to an external display. i know its only a minor change i need to make in System preferences but i dont know which one it is...
Please - if you know please please please tell me what it is.! =]
Thanks alot!
Carl... =]

I assume that you mean the blue screen is on your monitor, not your MBP. If this is the case, go to system preferences and click on displays, when the pop up box appears, click on "detect displays". See if that helps.

Search is showing no results with HTTPS URL

Hi All,
A power user wanted to have https entry in one of the content sources and asked us to remove the http entry for the web application. After that I have performed the incremental search.
However, the search on the https on the web site started showing NO results. We have configure search settings on the site as follows:
After that search is able to search but it search for other content sources. In the search service application we have several web applications and we want to scope to that specific web application and users should perform search only in that web application
scope. How could I scope search to a specific web application?
Our document library search is also retuning with no results.
Any suggestion to resolve the issue will be greatly appreciated.
Thanks in advance.
Sandy

Hi Sandy,
I think you have to edit the publick urls, and switch the default zone and intranet zone URLs, set the https as default zone public URL, then start a full crawl in a proper time if it impacts the user on production server, you may also test in a test
environment firstly.
Also there is aother article which should help.
http://ragavj.blogspot.in/2014/09/layouts15osssearchresultsaspx-not.html
https://support.microsoft.com/en-us/kb/2000365?wa=wsignin1.0
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Need with https url

          Dear All,
          import Base64Encoder.*;
          import javax.servlet.*;
          import javax.servlet.http.*;
          import java.io.*;
          import java.net.*;
          import java.security.*;
          import com.sun.net.ssl.*;
          import com.sun.net.ssl.HttpsURLConnection;
          try {
          Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
          System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
          URL url = new URL("https://abc/xyz");
          HttpURLConnection connection = (HttpURLConnection) url.openConnection();
          I have added th jnet,jcert and jsse in wlserver6.1\lib directory
          But it not working in weblogic6.1 sp2 what else do i need to get it working .
          The same code works fine in my IDE.
          Any help is highly appreciated.
          Thanks,
          ag


Try it like
          URL url = new URL(null, "https://abc/xyz",
          new com.sun.net.ssl.internal.www.protocol.https.Handler());
          ...url.openConnection();
          ag <[email protected]> wrote:
          > Dear All,
          > import Base64Encoder.*;
          > import javax.servlet.*;
          > import javax.servlet.http.*;
          > import java.io.*;
          > import java.net.*;
          > import java.security.*;
          > import com.sun.net.ssl.*;
          > import com.sun.net.ssl.HttpsURLConnection;
          > ...
          > .
          > try {
          > Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
          > System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
          > .
          > .
          > URL url = new URL("https://abc/xyz");
          > HttpURLConnection connection = (HttpURLConnection) url.openConnection();
          > .
          > I have added th jnet,jcert and jsse in wlserver6.1\lib directory
          > But it not working in weblogic6.1 sp2 what else do i need to get it working .
          > The same code works fine in my IDE.
          > Any help is highly appreciated.
          > Thanks,
          > ag
          Dimitri

Any one have difficulty with 10.5.7 using GB 09

hesitent to upgrade
because of my loops my Virtual guitarist 2
want to make sure

yesss i have few problems.... can any one suggest me wat to do??
1) I noticed that there are no Electric Guitar Preset. Under the pop-up menu i find 'none'.
2) after opening garageband for few times, i cannot se anything under new project when i start garageband.
Your help will greatly be appreciated.

Regarding Https Url Iview

We are using a https URL in URL iview and it is causing the issue. The issue is it is going out of the portal, thought it is opened in the same window.
The portal URL is not more seen and is overwritten by the URL iview URL, and also the portal top menu is not seen.
But the same thing is working fine with http URLs.I think the issue is with https.
Can somebody please help me?
Thanks

Hi,
did you have a look at the html-coding of the pages you are trying to call via URL-iView? Is there maybe something like 'target=top' or 'target=parent'? I think this might be a reason for the error you are describing
Kind regards
karin

Flash player not playing https urls (Videos)

We want to use flash player on web which we actually did it, but the problem is that it is not able to play the videos with https urls. It is doing good with http urls but not with https. Can you please guide me to make it work.
Thanks in advance,
Raju.

Kindly check it. This is rtmp (FMS) connection or process download connection.
Script
Ex:
nc.connection(null) - then this is run in http url (video/vid1.flv enough)
nc.connection("rtmp://sample/") - then this is not run in http url.

Https URL entry in AAM SharePoint

Hi, I need to publish one SharePoint site over Internet with https URL.
Currently I am using default URL to access internally, so I am creating new URL for Internet under Internet Zone in AAM with "https://desiredURL" .
So my question is can I entry https URL in AAM in Central Admin?
Or else there are other options to publish https URL for SharePoint site.
guide me.

You need to extend your web application and enable SSL for the extended web site. After these changes, update the changes in AAM. Refer to the following post for more information
https://nhutcmos.wordpress.com/2013/07/26/configure-ssl-certificate-for-sharepoint-external-https-access/
https://store.bamboosolutions.com/kb/article.aspx?id=12666
Cheers,

Web Url Monitoring internal/external network

We know that SCOM 2007 R2 can monitor the web url's. Does it monitor the weburl with in the internal network and also from external network. is it possible to monitor the same internal website which is confiured to use out side the network(external)
from scom 2007 R2. how to find which url is internal and which is external.

Please confirm that SCOM 2007 R2 having the capability to monitor a weburl from internal network and also from external network(internet).
I have configured the web url monitoring using the web application template…which I am sure that is monitoring the weburl internally(with in the network).
For the same weburl is configured to access from external network (internet). I need to monitor the same url
which is accessing from internet. If internet users are not able to access the weburl we need an alert from scom 2007 R2.
i googled for this answer and no luck.
Is there any different monitors available with scom to monitor weburl for both internal and external network

Difficulty with HTTPS URL monitoring using GRMG Lite

Similar Messages

Maybe you are looking for