Diffrance between Generate Export D S and Maintain Export D S

Hi Experts
If we right click on the Cube here getting so many options, in that what is the Generate Export Data Source and Maintain Export Data Source. what is the difference between them. Please explain with example.
Thanks in Advance

Hi,
If you want to load any BW Dat Traget (Cube/ODS/Master data) into another BW Data Target in the same or different BW system then you would create an export datasource. In the context menu (right click) of the Data target you would find the option "Generate export datasource". This way you create the datasource and the infosource is created automatically. Then you create the update rules and load the target cube/ods.
Goto RSA1 -> Infosource -> Datamart -> 8<Source Data Target name> to find the Infosource.
-Sachin

Similar Messages

Difference between Release DP to SNP and Release profile

Hi Experts,
What is the difference between Release DP to SNP
And maintain Release profile. Can u suggest am lot of confusion about these?
Explain in brief.
prasad

Hi Prasad,
Aparna point is absolutely correct. From usage point of view, date is the only difference.
There are 2 options to release forecast from DP to SNP.
1. Demand Planning -> Planning -> Release -> Release to Supply Network Planning.
2. By creating Rlease profile, activity , planning job, etc
1 is used for online purpose & for few product/location combinations. However 2 is used for the mass processing.
Use 1 to release a limited amount of data (a few product / location combinations only) from Demand Planning to Supply Network Planning. Do not use it for mass releases, for example large planning books.
If you try to release too much data with this transaction, memory problems are likely, since the system tries to read all the data
simultaneously. For mass processing, use 2 - Releasing the Demand Plan with Mass Processing.
Decision is based on data volume & performance.
Hope this helps.
Regards,
Nawanit

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

What is the difference between generate partner profile and creat partner

What is the difference between generate partner profile and creat partner profile ?

Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
Generation of Partner Profiles
The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
ORDERS
ORDCHG
ZINVRV
ORDRSP
INVOIC
FIDCMT
The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
generate partner profiles tcode BD82
creating partner profiles tcode WE20
 There are two methods for maintaining the partner profile:
 Maintain partner profile manually:
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
 Generate partner profile:
Prerequisite: The current distribution model is distributed to all participating systems.
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
Regards
Vasu

Difference between defining segment and maintaining segment for GL items

Hello All,
Can someone tell me the difference between 'Defining a Segment' (in enterprise structure) and 'Maintaining Segment for general ledger Items' (tcode FQ0300) and when is the later used?

Hi,
Segment reporting is part of functional reporting in sap. Segment reporting is required as per International Accounting Standard 14 for listed companies thats why it is defined in Enterprise structure .
Segment is maintained in profit
center master data from where it is derived, When you post to a GL account containing segment it gets posted to profit center. This is the basis purpose of maintaining segment at Gl account level. Segment reporting is gradually being replaced by business area. This is for you information.
Regards

Can I export solid objects into Illustrator / InDesign CS2 and maintain vector format

Can Adobe 3D export solid objects in vector format into Illustrator or InDesign CS2 suite?
I'm interested in taking solid 3D objects developed in Pro/E 2.0 and import from Adobe 3D into Adobe Illustrator & InDesign in vector format for page layout. I want to import solid objects in vector format and maintain color scheme and surface textures.
I'm running 3D trial version and can successfully import 3D objects (asm & prt files) solid views from Pro/E but can only export wireframe views from Adobe 3D Toolkit into Illustrator or InDesign (CS2). Solid objects first have to get rendered in a raster format before importing into Illustrator.
If this function is not supported does anyone have experience doing this using Quadraspace or Right Hemisphere 3D software?

Any help???? After 2 weeks I still can't learn from Adobe or Right Hemisphere people how to import solid objects in vector format into Illustrator with color and surface textures in place. All imported objects in vector format are converted to a wireframe or line format unless they are first rasterized.

Difference between generating VO while creating EO and otherwise

Hello All,
I wanted to know - Is there any difference between
creating a VO while creating an EO (i.e.by checking 'Generate Default View Object')
and
when If I create an EO first , then seperately create a VO for the same table used in EO; and then attach that EO to the VO . By attaching EO to VO, I mean, after creation of VO ; if we right click that VO to edit - the 'View Object Editor ' window opens. here, I select an EO through the 'Select Entity Objects for this View Object' window.
My requirement was to create a page where I wanted to do search and create. In the create page, the employee id and date has to come automatically. When submit button is clicked, the record is to be saved .
1st I tried through the second method. I got the search results and in the create page, the id&date came as expected but create wasnt successfull. No error or exception came but in the record that got inserted into database had only the id,date and who column values. The other columns had null value.
Later, when I tried using the 2nd method i.e by using the 'Default VO generated', creation was successfull.
Could anybody tell me why it wasnt working the second way?

user605260 ,
There is no difference between creating a VO while creating an EO (i.e.by checking 'Generate Default View Object') and create an EO first , and then seperately creating VO . The latter is used if u haven't planned to make which VO or haven't finalised VO query.
In ur case it looks the first time some mapping in VO might have not created correctly in any one case!
--Mukul

How to import pdf with hyperlink and and maintain its hyperlink while exporting it as HTML?

We can import pdf in indesign either using plaacemultiplefile script or using place submenu under file menu but both of them import pdf as graphic object and lost its all hyperlink. no doubt when i again export its as pdf than hyperlink are there as it is but when i export it as HTML,IDML or other format than than all hyperlink are lost so is there any way to maintain this if no than is there any way to write some new script utilities which will do the same .one solution i think is first convert pdf into docx and than import it as docx indesign import it as text frame and maintain all hyperlink but in this process pdf file lost its some formating while converting it into docx .

I probably should've remembered "rtfm" before writing all that. It seems to me now that I need to create a Master Page for each of the different layouts, then dynamically select the one I want to use at run-time, maybe with a script event ? The Master Page creation is a bit messy ... the only way I seem to be able to get multiple Master Pages is to open each Word doc, let Livecycle import it, then copy all the content into a new Master Page in my main document. That is, there doesn't seem to be a way to import a series of Word docs directly into separate Master pages of a single Livecycle form. I'll continue with the "read" part of "rtfm" ...

Diffrance between full repair and Full load .

hello ,
could you please let me know , what is the diffrance between full repair and Full load .
Regards

Hi,
Full Repair :
If you indicate a request in full update mode as a repair request, then it is able to update that request in data targets even if they already contain data from initial runs or deltas for this DataSource / source system combination and with overlapping selections.
Consequently, a repair request can be updated to ODS without checking the sequence of delta requests. The system supports loading in an ODS object by using the repair request without having to check the data for overlapping or request sequencing.
Full load :
Pulls the entire data from the source system to the BI system
Assign points if it helps
Thanks & Regards
santo

Difference between client Export/Import and a system refresh

Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
Injamuri

Hi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil

Difference between DB Export and Offline Database Backup

Hi all,
This is a conceptual Question.
I want more information on what is the difference between DB Export and Database Backup? Also, it would be helpful if you can provide me with some links to them where I can increase my knowledge regarding DB Export, why it is done and tell me some scenarios.
Thanks.
Anil

Hi Anil,
I have no link for DB export for you, because you don't ask for a specific database. But if you like, you can read the export part of the System copy guide you can download from http://service.sap.com/instguides.
But may be a short description is enough:
DB Export:
A DB export exports only the structure and data from the database, but no index pages. Therefore you have to build the indexes during the import. This could be very CPU intensive if your tables are big.
DB Backup:
A backup is a copy of all used blocks/pages inside a database (in Oracle also unused blocks). This includes structures, data and indexes. When you restore it, only the blocks/pages were moved, no additional operations are necessary.
If you want to keep a small copy which is less release dependent than a backup, you should use a DB export (if you use R3load, you are also DB independent). If you want to have a copy of your database which could be restored quickly , you should use a DB backup.
Regards
Ralph Ganszky

Diffrance between SD extraction and FI extraction

Hello Friends,
Can you please suggest me what is a difference of extracting FI data and SD data from R/3?
As I know that SD extraction is through LO method and it is based on V3 update.
But what about FI and is there any specific difference while extracting the data from FI.
FI data source is based on table; lets take an example that I want to extract the data for Special ledger and for Sales distribution cube.
Please let me know that what all are the scenario where we can differentiate SD extraction and FI extraction.
If any once can give me FI SL extraction navigation steps then it would be really nice help for me.
Regards

Jain
Check this previous thread
Differences between LIS,LO,CO/PA and FI-SL extractors
FI-SL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
CO PA
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
Thnaks
Sat

My other computer died and have my bookmark synced setup, however, I no longer have access to sync key and I do not want to generate a new key and erase my old bookmarks. How do I retrieve them?

My other computer died and have my bookmark synced with Firefox sync, however, I no longer have access to sync key and I do not want to generate a new key and erase my old bookmarks. How do I retrieve them?

Sorry, without the Sync Key you can't use Sync to recover your personal data. If you have another device that was connected that Sync account, you can recover your Sync Key from that other device in the Password Manager on non-mobile devices. See - [https://support.mozilla.com/en-US/kb/how-do-i-manage-my-firefox-sync-account?redirectlocale=en-US&redirectslug=where-can-i-find-my-firefox-sync-key#w_where-can-i-find-my-recovery-key this].
''Firefox Sync wasn't intended to be a "backup" medium, it was made to keep certain data synchronized between multiple devices.'' That "key" is used to encrypt your data before being uploaded to the Sync server and decrypt the data as it is downloaded to one of your devices. Only you have access to that "key", to maintain security over your data no one else knows that "key".
If you still have that old PC or the hard drive from that old PC, you can connect it to the new PC via USB with a USB enclosure, and you should be able to recover that data if the hard drive didn't fail. 
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Copy and pasting to Photoshop and maintaining position

I have tried to export a fairly complex illustrator file to PSD but encounter a 'not enough memory to save image' error (even though I have 8gb installed). As a workaround I am trying to cut and paste each illustrator layer into a new Photoshop layer. Both documents are the same size, but I can't figure out how to copy and paste and maintain the relative position of the layers to each other once I paste them into PS.
Can anyone help? Surely this is possible!
Thanks

Best method depends on the specific circumstance. But not knowing the specific circumstance, here's a method I have used for many years:
Assume a full-page ad that includes of a full-bleed raster image in the background. Various vector elements and live text need to be positioned optimally relative to the background image. Some of those elements are to be created as vector objects, but "flattened" as part of the background raster image. The final will be delivered as a PDF exported from the program being used for page assembly.
1. Create the background image in the raster imaging program, including bleeds.
2. Set up the page in the vector drawing program or page assembly program to match, including bleeds, with guides at the trims.
3. Place a low-res FPO of the raster image in the page assembly program, on its own layer, or otherwise locked. (A mere screenshot often suffices for this.)
4. Create the various text and vector objects.
5. For the set of vector objects that needs to become part of the background image:
5.1 Draw two small filled, unstroked rectangles (quarter inch or whatever) aligned to two opposite corners of the raster image.
5.2 Select these two objects along with whatever objects I want to rasterize as part of the background image. Copy.
5.3 Paste into the raster image program. The pasted content either auto-sizes to the bounds of the background image because it is of the same aspect ratio, or can easily be scaled to size before being deselected and rasterized. When deselected, the pasted content is rasterized to the same resolution of the background image, on its own layer (depending on the program.)
5.4 If the temporary "registration objects" (the two tiny squares) are within the trim, simply select them and delete them. If they reside only in the bleed, they can be left.
5.5 Apply whatever layer effects or other raster editing desired to the new content.
5.6 Flatten the whole image. Save it in appropriate full-res format. Import it to the page assembly program. delete the now-unnecessary vector objects that have become parts of the raster image. Export the press-ready PDF.
Specifics vary, of course, depending upon what specific programs are being used, and according to the specifics of the design. The basic principle is simply to create a couple of temporary "registration objects" at two opposing corners and include those in whatever you are taking to the raster program. They then serve to establish the aspect ratio and/or size of the transferred content.
Clean, simple, straightforward. Yes, slightly more work than the "just-draw-whatever-'looks-good'-on-screen-and-hang-how-it's-built" school of haphazard design that puts too much trust in all the automated flattening of raster effects applied in vector programs. But the final page construction is also clean, simple, straightforward, and I never have to worry about ugly surprises such as stitching artifacts between too many auto-created abutting raster slices.
JET

Error when generating program /SAPAPO/TSM141 and Errors in source system

Hello APO Experts!
I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
Do you have any idea of what this could be?
Best Regards
Nik

Hello,
The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
- SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from '/1APO/EXT_STRU'.
- SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
Are the two extraction structures the same or different ?
If they're different, please read the below solutions, otherwise, you can ignore the following.
In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
Please refer to following content from note 549184:
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the structure of the planning areas. That's why the planning area MUST ALWAYS be transported with or before the DataSource.
The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
- Basis - form routines
- Create planning objects
- Planning area extractor
with the flags "Reset generation time stamp" and "Generate" set.
And in order to transfer datasource correctly, please also refer to the consulting note 514524.
Best Regards,
Ada

Diffrance between Generate Export D S and Maintain Export D S

Similar Messages

Maybe you are looking for