Diffrence between Codec C40 Premium Resolution Option & Multisite MS Option & Dual Display Option

What is the difference between
Codec C40 Premium Resolution Option
LIC-C40-PR
Codec C40 Multisite MS Option
LIC-C40-MS
Codec C40 Dual Display Option
LIC-C40-DD

Hi patilaniket
Codec C40 Premium Resolution Option is option key which affects the resolution you can transmit during a video conference.
It should be required for:
1920 × 1080@60 fps (1080p60)
1920 × 1080@30 fps (1080p30)
1440 × 900@30 fps (WXGA+)
1472 × 1080@30 fps (SXGA+)
1680 × 1050@30 fps (WSXGA+)
1600 × 1200@30 fps (UXGA)
512 × 288@60 fps (w288p60)
768 × 448@60 fps (w448p60)
1024 × 576@60 fps (w576p60)
1280 × 720@60 fps (720p60)
Codec C40 Multisite MS Option is the option key on an endpoint that enables that endpoint to support a multipoint call w/o MCU. For example with this option you can create conference call with max. 4 members w/o MCU. For more participants you need MCU.
Codec C40 Dual Display Option is the option key that enables you to show 2 different contents. For example:
Video ouptuts on the C40 are enabled by default. W/o the Dual Display option, you'll get the same content on both screens. With this option you can have video call on one screen and shared content on the second screen.
Michal.

Similar Messages

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

Pls tel me what is the diffrence between snapshot isolation level of mssql and oracels isolation level

Hi,
In mssql i am using following things.
I have two database D1 and D2, i am using snapshot isolation (ALTER DATABASE MyDatabase
SET ALLOW_SNAPSHOT_ISOLATION ON) in both database.
Following is the situation.
1) There is one SP sp1 ( it can be in any database d1 or d2), it updates d2 from d1.
2) d2 is used for reading by web, execept above SP sp1
3) d1 gets updation from web in readcommite isolation.
4) both database will be on same instence of mssql.
Q1) wanted to know how to implement the same thing in oracle 11x express edition.
Q2) is there any diffrence between snapshot isolation level of mssql and oracel.
any link would be help full.
yours sincerely

>Q1) should i set the option to OFF after the process(ts) is complete
No keep it on.
>Q2) ALLOW_SNAPSHOT_ISOLATION ON , will affect other isolation level's transactions
No it will not affect any other transaction isolation level.
>Q3) is my choice of isolation level for process(ts) is correct or there can be any other solution.
Seems fine, although there are probably many other solutions.
David
David http://blogs.msdn.com/b/dbrowne/

Diffrence between IDOC successor and idoc copy.

Hello experts,
I have a released IDOC that I can not change. I have now two options, create a copy of
the IDOC or create a successor of it. can you tell me what is the diffrence between the two?
Thanks in advance,
Udi Dekel.

Hi Udi
If you are talking about IDOC data ,you can create the Copy of the Idoc or you can run the IDOC creator
FM or transaction to generate a new Idoc .
An then you can process them using the standard programs or as per the settings.
It would be good if you explain your problem in detail.
Regards
Neha
Edited by: Neha Shukla on Nov 30, 2008 3:32 PM

What is the diffrences between Oracle 11g standard & enterprise edition

Hi,
Can anybody please tell the diffrences between Oracle 11g standard & enterprise edition in detail.
Thanks in advance,
Anindya

Oracle Enterprise Edition:
Enterprise Edition is the full (top of the range) version or the Oracle Database Server. Options like RAC, Partitioning, Spatial, etc. can be purchased separately to enhance the functionality of the database.
Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
Oracle Standard Edition One:
Standard Edition One is a low cost, entry-level version of the Oracle Standard Edition database server. Standard Edition One can only be licensed on small servers with a maximum capacity of two processors.
Oracle Personal Edition:
Personal Oracle is a single user version of the database server. It is mostly the same as Enterprise Edition, but doesn't support advanced options like RAC, Streams, XMLDB, etc.
Oracle Lite:
Oracle Light is a database engine that can be used on mobile platforms like cell phones and PDA's.
Oracle XE:
Express Edition (XE) is a free, downloadable version of the Oracle database server. Oracle XE can only be used on single processor machines. It can only manage up to 4 GB of data and 1 GB of memory. ISVs can embed XE in 3rd party products and redistribute it freely.
Additional Reading:
Oracle10g Database Licensing Guide
(Part of the Oracle 10g Documentation Set)
Oracle9i Database New Features Guide
Chapter 5: Database Feature and Option Availability
Oracle Store
http://store.oracle.com/
source:http://www.orafaq.com/faq/what_is_the_difference_between_the_enterprise_standard_and_personal_editions_of_oracle

What is the diffrence between package javax.sql and java.sql

Is javax designed for J2EE?
And when to use package javax?

Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/

What is the diffrence between My Runnable Interface and Java Runnable

Hi folks
all we know that interfaces in java just a decleration for methods and variables.
so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
so what is the diffrence between My Runnable Interface and Java Runnable?
thnx

Hi folks
all we know that interfaces in java just a decleration
for methods and variables.
so my Question is why when i create an interface its
name is "Runnable" and i declared a method called
"run" inside it.then when i implements this interface
with any class don't do the thread operation but when
i implement the java.lang.Runnable the thread is going
fine.
so what is the diffrence between My Runnable Interface
and Java Runnable?
thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

What is the diffrence between a blanket PO and a Framework order?

What is the diffrence between a blanket PO and a Framework order?

Hi
You have to use document type Frame work order for Blanket PO.
You can use blanket purchase orders to procure consumable materials or services for which it is not worth creating a separate purchase order for each procurement transaction.
Blanket purchase orders are usually valid for a longer period of time. You can directly post the invoices for the materials and services procured for this blanket purchase order.
Raju

What is the diffrence between OMB plus command and OMB command

what is the diffrence between OMB plus command and OMB command?
are they both TCL command?

Hi Alena,
Welcome to SDN.
Check this
EXIT in Loops and Modularization Units
Basic form
EXIT.
Effect
Within a loop structure:
Terminates looop processing (DO, WHILE, LOOP, SELECT).
Within subroutines and other modularization units (but not in a loop structure):
Leaves the subroutine or modularization unit (FORM, MODULE, FUNCTION, TOP-OF-PAGE, END-OF-PAGE).
Outside loop structures and modularization units (report processing):
Terminates report processing and triggers list display.
But not sure about
atexit() .. ,may use in Object Oriented Programming.
(C++)
"At exit-command in module pool."
Mohinder
Edited by: Mohinder Singh Chauhan on Aug 1, 2008 8:06 AM

What is the diffrence between Row id and primary key ?

dear all
my question is about creating materialized views parameters (With Rowid and
With Primary kry)
my master table contains a primary key
and i created my materialized view as follow:
CREATE MATERIALIZED VIEW LV_BULLETIN_MV
TABLESPACE USERS
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT
BCODE ID, BTYPE BTYPE_ID,
BDATE THE_DATE,SYMBOL_CODE STOCK_CODE,
BHEAD DESC_E, BHEADARB DESC_A,
BMSG TEXT_E, BMSGARB TEXT_A,
BURL URL, BTIME THE_TIME
FROM BULLETIN@egid_sefit;
I need to know is there a diffrence between using (with row id) and (with primary key) on the performance of the query?

Hi again,
fast refreshing complex views based on rowids, according to the previous subject.
(You're example shows that) are not possible.
Complex remote (replication) snapshots cannot be based on Rowid too.
for 10.1
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_6002.htm#sthref5054
for 10.2
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#sthref6873
So I guess (didn't check it) that this applies ONLY to replication snapshots.
This is not documented clearly though (documentation bug ?!)
Documentation states that the following is generally not possible with Rowid MVIEWS:
Distinct or aggregate functions
GROUP BY or CONNECT BY clauses
Subqueries
Joins
Set operations
Rowid materialized views are not eligible for fast refresh after a master table reorganization until a complete refresh has been performed.
The main purpose of my statements was to try to give a few tips how to avoid common problems with this complex subject, like for example: being able to CREATE an MVIEW with fast refresh clause does not really guarantee that it will refresh fast in the long run (reorganisation, partition changes) if ROWID based, further the rowid mviews have limitations according to the documentation (no group by, no connect by, link see above) plus fast refresh means only to use filter columnns of the mview logs, plus for aggregates you need additional count (*) pseudo columns.
kind regards
Karsten

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
<b>System Events (Default)</b>
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
<b>Application Events</b>
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the diffrence between a javabean and EJB

hi!
what is the diffrence between a javabean and entreprise jvaabeans! i mean which are the uitilization featires of eaxh one !

i am seeking for a solution for my problem , in fact i ma trying to implement and develop an application with java that allows a certain range of IP adresses to be connected to a database server in order to extract the suitable data from the server .
let me explain mor ethe suitation , in fact what i am loking for is to use javabeans to grant my application much more consistence and pertinence : si i am asking if it could be possible to use javabeans in my case especially if i am not trying to developp a web application but a cleint /server one allowing some services.
The application is in fact dealing with a stock exchange market and what i am trying to do is to grant particilar registrated customers to have the informations that they need ( portofolio, currency's status, market indicators, .) also drawing some charts decribing rates, variations, and others specefic financial caracterestics .So , if we consider that this application is not a web application ( no HTTP request and no servers like apache or others ) how it is possible to use javabeans and not EJB to build the application? i mean what could be suitable and preferable to rely on and dvelop to ensure a good java application !!
if you need more details to help you find the answer for me don't hesitate to answer me back !!
Someone here gave me that answer
use RMI to code the services and (Updateable) Value Objects to pass the information between tiers.
RMI is an all-java distributed component framework (ie. EJB, CORBA, DCE/RPC, DCOM, etc.), that is very suitable for developing non-containerized multi-tier applications. Refer to the RMI trail in the Java Tutorial as a starting point for coding RMI solutions (http://java.sun.com/docs/books/tutorial/index.html). Under this scenario you would code the database access service as an RMI service (server-side). Client/server communication should be facilitated through the use of JavaBeans/classes that wrap the information being passed (customer information, portfolio details, market information, etc.) - these are refered to as 'Updateable Value Objects' (a design pattern). Graphing and charting would be handled in your client from the information received from the (RMI) server. GUI JavaBeans can be used to provide this functionality as well as other client-side services. There are numerous "shrink-wrapped" components for GUIs available on the market just peruse any Java magazine to find them.
but how comes? how can i do it !! and where can i find more information please about 'Updateable Value Object "
thanks

What is the diffrence between K7T266 Pro and Pro2?

What is the diffrence between the pro and the pro 2, besides the pro2 being red and having the link lights. Upto what CPU and what type can the pro 1.0 handle? Also, can it be moded to fit a better cpu? Anyone know?
-Nick

Pro has the KT266 chipset
Pro2 has the KT266A chipset
KT266A has improvements that increase performance, and the Pro2 can be modified to fit Thoroughbred CPUs.
The Pro (KT266) can only accept up to the Athlon 2000+ palomino. Also, overclocking the FSB disables USB; this was fixed with the KT266A.

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

What is the Diffrence between Oracle 11 and 11i

What is the Diffrence between Oracle 11 and Oracle11i ?.
With Rgds
Arun J.Isaac

Oracle 11i is internet based and run with java platform where we can see the applets downloading alongwith oracle forms and it refreshes all the jar files in oracle default directory.
Oracle 11 is not intergrated with Java its an Oracle standalone platform.
Regards,
Arumugam S.

Diffrence between Codec C40 Premium Resolution Option & Multisite MS Option & Dual Display Option

Similar Messages

Maybe you are looking for