Diffrence between quality of preview monitor from hardware & GFX card

Can anyone explain me the diffrence between quality of preview monitor from 3rd party hardware card like BM, matrox, AJA etc & GFX card like GTX 285 which also gives preview full frame HD, is it an draft mode or full quality

This topic has been quite extensively covered - and VERY recently too.
See this thread...
http://forums.adobe.com/message/3333199#3333199

Similar Messages

Is there any diffrence in quality between apple products that is buy from united states or one that i buy from Emirate?

is there any diffrence in quality between apple products that is buy from united states or one that i buy from Emirate?

Not from this Forum .This is a User to User technical support Forum .There is no relevant Apple presence here
All iOS devices are made at the same factories in China for world wide distribution .
The only difference is that some Middle East governments forbid the shipping of devices with Facetime and Apple are required to remove it from shipments to certain Countries

Preview Monitor and Exporting Quality Issues

Hello, in a previous life I was a video editor from the world of Avid and I just picked up Premiere for an emergency side mission at my current place of employment and I have run into a couple issues with CS4.
1. The preview monitor for the Sequence displays a lower quality of the video that comes from the uploaded Clip and it also does not play back at a steady frame rate. However, when I look at the Clip in the secondary preview monitor that is reserved for clips, titles, etc, the video quality is as high as what is expected. How do get the sequence monitor to playback at the quality the clips are uploaded as and how do I get the playback to do so at a steady 30fps?
2. My exporting experience was based around dubbing directly to Beta tapes and I never really had to do any digital file exporting. I need some tips on what to export a Sequence as that will retain a high amount of the quality while also keeping the file size to what will fit on a disk. The video length in this case would never be more than 5 minutes as I am only working on sales videos. Also, the file needs to be playable in Windows Media Player.
Thank you in advance for any help on these issues.

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

What is the diffrence between LLA and LZA of macbooc.imean quality?!

what is the diffrence between LLA and LZA part numbers of macbooc.i mean quality?! i want to buy ME865LZA .is that ok?

Those letters simply indicate the region where the MacBook will be sold.
LL = North America
LZ = Chile, Paraguay, Uruguay.
http://www.jbfaq.com/article.asp?id=63

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Diffrences between versions

hi experts,
can u help in knowing the diffrences between the version of BW i.e
Diffrence between BW 3.5 and BW 3.1
Diffrence between BW 3.1 and BW 3.0
thanks in advance
deep

hi deep,
difference between 3.5 and 3.1
(This asset was deleted 27 Dec 2011)
what's new in bw 3.5
-Information Broadcasting via Business Explorer (BEx) Broadcaster
-Universal Data Integration
-Embedded BI: Integration into SAP NetWeaver
-BI Platform Enhancements
-Planning and Simulation (BW-BPS)
difference between 3.1 and 3.0
service.sap.com/bi
what's new in bw 3.1
- capability to install new business content with 'add-on'
SAP BW Release 3.1 Content - What' s new?
SAP provides a comprehensive set of business analytics to integrate and analyze process-oriented content from a variety of sources and across various applications and industries. It enables companies to improve business processes and quickly respond to changing market dynamics by providing business information to executives, analysts and information consumers, delivered in real-time via the Web.
SAP BW's analytical foundation and wide-range of Business Content enables customers to create their own analytical applications that best fit their business requirements.
Business Content and Business Analytics
Business Content for Oracle Applications
Standard Business Content for Oracle Applications 11i was delivered with BW 3.0B covering the Financials and Project Accounting areas. To enhance the value of these existing analytical applications, including Web cockpits for cost center and project monitoring, we provide predefined extractors to load the business data from the Oracle Applications source system into SAP BW.
The integration of Oracle Applications into SAP BW is based on the new Oracle extract package of Ascential's DataStage product. Business data from Oracle Applications is extracted into the InfoCubes for the Oracle General ledger and for Oracle Project Accounting that were delivered with BW 3.0B. For more information please click here and also here.
Analytics Supporting The Concept of Business Activity Monitoring (BAM)
BAM is a Gartner term that defines the concept of providing real-time access to critical business performance indicators in order to improve the speed and effectiveness of business operations. As business transactions are increasingly automated, the speed of these transactions accelerates. SAP BW delivers packaged analytics, for example in the SCM area, that combine application and data integration using SCEM (Supply Chain Event Management).
SCEM enables companies to monitor processes immediately and in great detail. This means that they are able to recognize and react to critical situations quickly, before they result in delayed deliveries and production standstills. In many cases, event information is essential not only during the processes, but also after completion, because it can be used both for measuring quality aspects and for cost saving. For this reason, it is advisable to integrate the Supply Chain Event Manager with SAP Business Information Warehouse (SAP BW).
Business Analytics - SAP's Packaged Analytical Applications per Business Area / Industry
Analytical applications measure and improve business processes across a company's entire value chain. Based on a solid foundation (Data Warehousing, BI Platform and BI Suite of tools), SAP BW provides integrated applications that understand each other's metadata, and offer a closed loop that incorporates all aspects: Operations, analytics, and personalization.
SAP BW 3.1 Content delivers analytics for all business areas such as CRM, SCM, SRM, HR, etc. as well as for different industries, such as Retail, Banking, and Service Providers to name a few.

Cannot view high quality on external monitor - Prores 422?

I am working on a music video and trying the Prores 422 codec for the first time. When I view the clips from the viewer in Final Cut pro I can insert in and outpoints as normal and watch the clips on my external monitor in full quality and that is all good (full quality and full screen 1080P).
But when I drag the clip into the timeline it becomes green. When I view the film on my external monitor now the resolution drops a bit and the quality looks coarse. Then I render it, but the same result occur (bad qality during viewing og the external monitor). I have managed good preview quality before (working with full quality, although that was from another camera and with a different codec, but still 1080P). I am using a laptop / Macbook Pro, 2.5 GHZ intel with 4GB of ram and an esata external drives + additinal FW 800 drives externally.

I did encode with Clipwrap (Prores 422 and for audio Convert Audio to LPCM). It seems Final Cut Pro does not recognize the settings as the sequence settings were to low.... as you said.
I tried changing the sequence settings to Prores 422 1920x1080 / 50i, with no change (it seemed like).
The camera I was shooting with is the Panasonic SD700 which shots at 50i (60 in the us).
Message was edited by: Simen Myrberget

Low quality video after import from After Effects in FCP 7, but not FCP5

Hi everyone,
I trying to export a video from final cut pro. This video has motion graphics I built in After Effects, as well as footage from my T2i camera. I then took it into FCP to drop in audio and edit all my elements together.
When I exported a 30 second preview a few days ago in FCP5, the .mov file retained the quality of the export from AE and looked great - no quality lost, smooth animations, high quality video.
However, I then upgraded to FCP7, and now the quality is lower and the video components are a bit grainy when I export using the same settings. I've tried tweaking the settings, different ways of compression, but nothing is giving me the same clean export. I've even tried changing the sequence settings and putting my footage back down.
The only other thing that's different is I compressed my T2i footage to ProRes422 before taking it into After Effects, however even the 15 seconds of original footage I didn't compress is grainy now (and so is the original and new graphic work) so I don't think that's it. When I change the timeline sequence settings, I can get it looking good in the preview - but as soon as I render it or send it to compressor it loses quality again.
The ONLY differently between the two exports was upgrade Final Cut, but that doesn't make any sense to me. I've even tried reopening the preview FCP file (which then asks me to update the file to FCP7) and when I do it exports grainy as well - and NOTHING else has changed in that file or the export settings since my initial export of a 30 seconds preview.
Does anyone have any suggestions on what the issue may be? Or, what settings I can use to retain the quality when exporting?
Thanks,
Lauren
Message was edited by: kiwikiwi

Thank you so much! Although it's not exporting quite as clear as before, it's much, MUCH better now that I've corrected the timeline dominance - I'd say 95% better; and it will be re-compressed by my clients for web streaming so it doesn't need to be perfect - but the initial quality was garbage.
I suspect when I exported my T2i footage as a ProRes file, than imported into After Effects, then back into FCP something happened along the way that messed up the quality slightly. Although the only difference in my method between FCP5 and 7 was converting to ProRes; which I only did for editing purposes as the native T2i footage needs to be rendered... which ended up being redundant as all my After Effects work needed to be rendered anyway. Ho hum.
Do you think the ProRes conversion could account for the quality loss? It wasn't just the footage that was grainy/fuzzy, it was also the After Effects graphic work, which is why I didn't think the converstion could be the culprit. Hm. I'll have to look into this more!
Thanks again - and so sorry for my delayed reply, I went on vacation shortly after I posted that message and only just got back to this project now
Message was edited by: kiwikiwi

Preview monitor not displaying properly

i just did a clean install of leopard, then did a clean install of FCS2, and then ran all the updates. a couple days later i try to run color (which worked on this machine when i had tiger)and the preview window is very funky and not usable. i have attached a screenshot. i tried restarting, tried other clips, tried other formats- but nothing seems to get the preview to actually display the video properly.
color did work on this exact setup before i upgraded the OS. I bought anew harddrive and installed everything from scratch. i have the ati x1900 as the main card with pcie lane width set to 16 as well as an ati hd 2600xt with the lane width set to 1x. i have a mac pro with 8 gigs of ram, 8 core x 3.0ghz.
working with prorez footage. no special hardware add ons at all. sent to color command in fcp kept causing a crash as soon as i tried to playback in color (and preview monitor still didn't work).
here is a link to a screeshot of what the monitor previews.
http://smcouples.com/Samples/color.jpg
please help- i can't use color anymore.
P.
Message was edited by: Patrick Moreau

Colormunki is a known no-no with Color. http://discussions.apple.com/thread.jspa?messageID=8640308&#8640308
Searching the forum can reveal your answers, if you use the search function.
However, a color profiler does nothing to help you with regard to consistent color when working with video. Again, you need to use a video input/output device (I sound like a blasted broken record with this) with a video display device capable of a daily setup, like a projector or a video crt or flat panel. Using computer monitors with Color is worthless.

Preview Monitor?

So on my pc I have Adobe Premiere Pro CS3 and I have the preview play in the canvas and on a preview monitor at the same time. I am trying to do the same thing on my mac pro. I want final cut to preview to my canvas and preview monitor at the same time just like I have in Premiere. I have an iLink cable from the mac pro to a HVRM15 and from there component cables to the hdtv. How do I set final cut to output a preview to this monitor?
Thanks

#8 External Monitor Viewing.
Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/monitor via RCA or S-Video.
Then start up your camera and TV, then open FCP.
Go to the View Menu, choose > External Video > All Frames
VIEW>Video Playback should be “Apple Firewire NTSC” (If you are using an NTSC set)
VIEW>Audio playback should be “Audio follows Video”
Technically, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the A/V DEVICES tab.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Diffrence between N85-1 and N85-a

is there any Hardware/Software Diffrence between N85-1 And N85-a ?

Hi
Abstract classes
Abstract classes are normally used as an incomplete blueprint for concrete (that is, non-abstract) subclasses, for example to define a uniform interface.
Classes with at least one abstract method are themselves abstract.
Static methods and constructors cannot be abstract.
You can specify the class of the instance to be created explicitly: CREATE OBJECT <RefToAbstractClass> TYPE <NonAbstractSubclassName>.
Abstarct classes themselves cant be instantiated ( althrough their subclasses can)
Reference to abstract classes can refer to instance of subclass
Abstract (instance) methods are difined in the class , but not implemented
They must be redefined in subclasses
CLASS LC1 DEFINAITION ABSTARCT
PUBLIC SECTION
METHODS ESTIMATE ABSTARCT IMPORTING
ENDCLASS.
Interfaces
Interfaces only describe the external point of contact of a class (protocols), they do not contain any implementation.
Interfaces are usually defined by a user. The user describes in the interface which services (technical and semantic) it needs in order to carry out a task.
The user never actually knows the providers of these services, but communicates with them through the interface.
In this way the user is protected from actual implementations and can work in the same way with different classes/objects, as long as they provide the services required. This is known as polymorphism with interfaces.
Interfaces features
INTERFACE I_COUNTER.
METHODS: SET_COUNTER IMPORTING VALUE(SET_VALUE) TYPE I,           INCREMENT_COUNTER, ENDINTERFACE.
CLASS C_COUNTER1 DEFINITION.   PUBLIC SECTION.
    INTERFACES I_COUNTER.
PRIVATE SECTION.
    DATA COUNT TYPE I.
ENDCLASS.
CLASS C_COUNTER1 IMPLEMENTATION.
METHOD I_COUNTER~SET_COUNTER.
    COUNT = SET_VALUE.
ENDMETHOD.
METHOD I_COUNTER~INCREMENT_COUNTER.
    ADD 1 TO COUNT.
ENDMETHOD.
ENDCLASS.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10535251&messageID=2902116
Regards
Kiran

Diffrence between Direct Delta,Que Delta and Un searlised v3 update

Dear All,
Can any one explain the diffrence between Direct Delta,Que Delta and Un searlised v3 update and in which situation to which update mode.
Thanks in advance

Dear Friend,
Transaction posting lead to:
1. Records in transaction tables
2. For an initial load a setup needs to be executed which reads the transaction data and stores the data in a setup table
3. These setup tables are read during an initial or full load
4. Further transactions are posted into the transaction tables and also caught into Update tables / Extraction Queue.
5. A periodically scheduled job transfers these postings into the BW delta queue
6. This BW Delta queue is read when a delta load is executed.
a. Update methods: (serialized) V3
u2022 Transaction data is collected in the R/3 update tables
u2022 Data in the update tables is transferred through a periodic update process to BW Delta queue
u2022 Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
u2022 Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
u2022 V2 Update errors can lead to V3 updates never to be processed
u2022 Details in SAP Note 505700
b. Update methods: direct delta
u2022 Each document posting is directly transferred into the BW delta queue
u2022 Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
u2022 Extraction is independent of V2 update
u2022 Less monitoring overhead of update data or extraction queue
Cons:
u2022 Not suitable for environments with high number of document changes
u2022 Setup and delta initialization have to be executed successfully before document postings are resumed
u2022 V1 is more heavily burdened
Note: Con 2: a delta queue has to present to collect the document postings. This queue is only available after a successful delta initialization.
c. Update methods: queued delta
u2022 Extraction data is collected for the affected application in an extraction queue
u2022 Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
u2022 Extraction is independent of V2 update
u2022 Suitable for environments with high number of document changes
u2022 Writing to extraction queue is within V1-update: this ensures correct serialization
u2022 Downtime is reduced to running the setup
Cons:
u2022 V1 is more heavily burdened compared to V3
u2022 Administrative overhead of extraction queue
d. Update methods: Un-serialized V3
u2022 Extraction data for written as before into the update tables with a V3 update module
u2022 V3 collective run transfers the data to BW Delta queue
u2022 In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Note: i. Pro 2: In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each Data Source into the BW delta queue, depending on the application.
ii. Pro 4: Even without a successful initial load and thus no BW delta queue yet available, document postings are already collected in the extraction queue.
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
u2022 Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
u2022 V2 update has to be successful
Hope this will be helpful.
Please respond back if there is still any query.
Varun

What is the diffrence between linksys ea4200 v1 and v2?

The title says my message.
what is the diffrence? and why can i not find the ea4200 at the support page and at the buy page.?

Hi there. There's no EA4200 with Cisco just EA4500, EA3500, and EA2700. Perhaps you mean, E4200? There is an E4200 V1 and V2. The main difference apart from hardware version 1 is that the E4200 V2 can be installed or configured via the Classic Userinterface (means logging in to 192.168.1.1) or with the newest Cisco Connect Cloud where you can create an account and from there you can either set it up locally or remotely. . You can check the links below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=7824947fe4444ac3ad5ccb896007e9b8_Getting_to_Know_t...
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=19d223f0c48c470484a99a28a40f5c6b_Getting_to_know_t...

What is the diffrence between Row id and primary key ?

dear all
my question is about creating materialized views parameters (With Rowid and
With Primary kry)
my master table contains a primary key
and i created my materialized view as follow:
CREATE MATERIALIZED VIEW LV_BULLETIN_MV
TABLESPACE USERS
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT
BCODE ID, BTYPE BTYPE_ID,
BDATE THE_DATE,SYMBOL_CODE STOCK_CODE,
BHEAD DESC_E, BHEADARB DESC_A,
BMSG TEXT_E, BMSGARB TEXT_A,
BURL URL, BTIME THE_TIME
FROM BULLETIN@egid_sefit;
I need to know is there a diffrence between using (with row id) and (with primary key) on the performance of the query?

Hi again,
fast refreshing complex views based on rowids, according to the previous subject.
(You're example shows that) are not possible.
Complex remote (replication) snapshots cannot be based on Rowid too.
for 10.1
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_6002.htm#sthref5054
for 10.2
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#sthref6873
So I guess (didn't check it) that this applies ONLY to replication snapshots.
This is not documented clearly though (documentation bug ?!)
Documentation states that the following is generally not possible with Rowid MVIEWS:
Distinct or aggregate functions
GROUP BY or CONNECT BY clauses
Subqueries
Joins
Set operations
Rowid materialized views are not eligible for fast refresh after a master table reorganization until a complete refresh has been performed.
The main purpose of my statements was to try to give a few tips how to avoid common problems with this complex subject, like for example: being able to CREATE an MVIEW with fast refresh clause does not really guarantee that it will refresh fast in the long run (reorganisation, partition changes) if ROWID based, further the rowid mviews have limitations according to the documentation (no group by, no connect by, link see above) plus fast refresh means only to use filter columnns of the mview logs, plus for aggregates you need additional count (*) pseudo columns.
kind regards
Karsten

What is the diffrence between a javabean and EJB

hi!
what is the diffrence between a javabean and entreprise jvaabeans! i mean which are the uitilization featires of eaxh one !

i am seeking for a solution for my problem , in fact i ma trying to implement and develop an application with java that allows a certain range of IP adresses to be connected to a database server in order to extract the suitable data from the server .
let me explain mor ethe suitation , in fact what i am loking for is to use javabeans to grant my application much more consistence and pertinence : si i am asking if it could be possible to use javabeans in my case especially if i am not trying to developp a web application but a cleint /server one allowing some services.
The application is in fact dealing with a stock exchange market and what i am trying to do is to grant particilar registrated customers to have the informations that they need ( portofolio, currency's status, market indicators, .) also drawing some charts decribing rates, variations, and others specefic financial caracterestics .So , if we consider that this application is not a web application ( no HTTP request and no servers like apache or others ) how it is possible to use javabeans and not EJB to build the application? i mean what could be suitable and preferable to rely on and dvelop to ensure a good java application !!
if you need more details to help you find the answer for me don't hesitate to answer me back !!
Someone here gave me that answer
use RMI to code the services and (Updateable) Value Objects to pass the information between tiers.
RMI is an all-java distributed component framework (ie. EJB, CORBA, DCE/RPC, DCOM, etc.), that is very suitable for developing non-containerized multi-tier applications. Refer to the RMI trail in the Java Tutorial as a starting point for coding RMI solutions (http://java.sun.com/docs/books/tutorial/index.html). Under this scenario you would code the database access service as an RMI service (server-side). Client/server communication should be facilitated through the use of JavaBeans/classes that wrap the information being passed (customer information, portfolio details, market information, etc.) - these are refered to as 'Updateable Value Objects' (a design pattern). Graphing and charting would be handled in your client from the information received from the (RMI) server. GUI JavaBeans can be used to provide this functionality as well as other client-side services. There are numerous "shrink-wrapped" components for GUIs available on the market just peruse any Java magazine to find them.
but how comes? how can i do it !! and where can i find more information please about 'Updateable Value Object "
thanks

Diffrence between quality of preview monitor from hardware & GFX card

Similar Messages

Maybe you are looking for