Diffrence betwn. - TAXINN and TAXINJ

Hi All,
Whatz the difference between TAXINJ and TAXINN
If I use TAXINN no need to maintain different, different Tax codes is this correct?
Regards,
MS

HI
TaxINJ used for formula based and taxinn used for condation based tax code will be used
Plz reward points if it is usefull
Regards
Sure

Similar Messages

Diff in TAXINN and TAXINJ

Hii All...
I am new in CIN can anyone please tell me what is the difference in these two procedure ?
Which one is generally used and why ?
And is there any difference in accounts to be maintained in both procedure.
Can any one please tell me both Tax procedure methods in details..
Do the needful help,
Thanks
Abhinay Waikar.

Hi Abinay,
ref the blw detailed info reg cin..
If SAP is implemented for any company in INDIA and the company is in EXCISABLE range then
in SAP ,CIN is implemented ( Country India Version) then
you have to implement the SAP by either of the one type of CIN
1. TAX INN - Condition based CIN implementation
2.TAX INJ -Formula Based CIN implementation
1. If you are using TAXINN then system will pick rate from condition record maintained using tcode FV11.
2. If you are using TAXINJ then rates are to be entered while creating tax code in FTXP & J1ID.
===============================
and ref the blw links which will give the complete details abt cin - tax procedure diff and config.
Cin config. Links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc?overridelayout=true
http://www.scribd.com/doc/7216701/MMCIN-Customization-Document
http://help.sap.com/saphelp_erp2005/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Diff between TAXINJ and TAXINN
Diff between TAXINJ and TAXINN
diff betwn TAXINN &TAXINJ
Re: Diff in TAXINN and TAXINJ
diff.between Taxinn& taxinj

Difference bitwen TAXINN and TAXINJ

Dear Friends,
can you please explain the difference bitwen TAXINN and TAXINJ and how the system carry out tax values to the sales order in the above two procedures. ( if you don't mind please give in more elaberate way)
thanks
nitchel

Dear Nitchel
Already, a lots of threads with several postings, are available. Have a look:
[TAXIIN and TAXINJ|TAXINN & TAXINJ]
[TAXIIN and TAXINJ|taxinn/taxinj?]
[TAXIIN and TAXINJ|Differences between TAXINN & TAXINJ]
[TAXIIN and TAXINJ|Difference between Taxinj and Taxinn]
And Many More - [Search Forum|https://www.sdn.sap.com/irj/scn/forumsearch]
I think, this will be sufficient. If not, lets us know, precisely.
All the very Best,
Amit

Difference between TAXINN and TAXINJ

Dear Friend,
Any one tell me the what are the difference between TAXINN and TAXINJ.
regards
Joseph

Hello,
The only difference between TAXINJ & TAXINN is that TAXINJ is formula based tax calculation procedure for India and TAXINN is that condition based tax calculation procedure. Now a dayu2019s most of the companies are using TAXINJ procedure.
In formula based we are using the formula like (excisecessvat/cst etc.,) but in condition based we just maintain the tax codes which are relevant to taxes and these tax codes has been assign to condition records which we are maintained in MM and SD configuration.
Thanks
Para

Diff Between TAXINN and TAXINJ

Hello Gurus,
Can anyone explain me the difference between TAXINN and TAXINJ..
Answer will be highly appreciated...
Thanks in Advance
Regards
Jigar

Hi Jigar
TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination.
ASSIGN POINTS, IF FOUND USEFUL
Regards
Vivek Sahni

TAXINN and TAXINJ missing

Dear Gurus,
Both TAXINN and TAXINJ are missing in our IDES system in client 800. We checked in client 000 and both the procedures are present there. Please let us know how to transport these two procedures to client 800 from client 000?
Thanks,
Abhishek.

hi,
infact this is possible with the help of basis guy but even then i can give u a t.code STMS with the help of this you can try to transport.But inyour ides system transport mgmnt should be configured to transport the data from one client to another.

TAXINN AND TAXINJ PROCEDURE

HI, CAN ANYBODY GIVE ME THE FULL TAXINN AND TAXINJ PROCEDURE WITH ALL TAXES COVERED.
REGARDS
SANDEEP.

hi kumar,
the TAXINN & TAXINJ are tax procedure you will not be able to find in the in sale & distribution follow the below menu path
spro>>finanical accounting>>finanical accountiing global setting>>tax on sale/purchase>>basic setting>>check calculation procedure
rewards if helpful
regards,
Arun prasad C R

TAXINN AND TAXINJ difference ? AND Which is better ?

HI,
Could u please explain difference between TAXINN AND TAXINJ ? AND Which is better ? And in which scenario they are used ?
Regrds,
Binayak

TAXINJ & TAXINN are Tax Procedures in India. TAXINJ is old version & TAX INN is new version. Both has its own advantage & disadvantage.
Upto 4.6C & partially 4.7 version of SAP, TAXINJ was used. TAXINJ is formula based calculation, in which we maintain the tax rate in Tax Code itself. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST & permutation & combination of these, we require that many Tax Codes. For example:
Tax Code: A1
Taxes: 16% Excise Duty + 2% Education Cess + 12% VAT
Tax Code: A2
Taxes: 16% Excise Duty + 2% Education Cess + 8% VAT
Tax Code: A3
Taxes: 12% Excise Duty + 2% Education Cess + 12% VAT
Tax Code: A3
Taxes: 12% Excise Duty + 2% Education Cess + 8% VAT
From 4.7 version onwards of SAP, TAXINN is being recommended & used. TAXINN is more user friendly & condition record based. In TAXINN, Tax Codes are statistical & of not much relevance, but are required to be maintained in condition record for taxes condition type. This makes Tax Codes simpler. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST, we need not have the tax codes to that combination. For example:
Tax Code: A1
Can be used for any rate of excise duty, as tax code is only required to be maintained statistically in condition record.
Tax Code: A2
Can be used for any rate of VAT, as tax code is only required to be maintained statistically in condition record
Regards,
Rajesh Banka
Reward points if helpful.

CIN - TAXINN and TAXINJ

Why should we go for TAXINN, what are the advantagous of TAXINN over TAXINN
Thanks in Advance

Hi,
TAXINJ is Routine based based PRICING PROCEDURE and we have to define the Routine/Requirement for our requirement and assign to each condition type in that pricing procedure
Here we have to define Routines with the Help of ABAPers. Till 4.7 version this pricing procedure is used
From 4.7 Onwards, SAP came with TAXINN pricing procedure which is condition records based pricing procedure for whcih we can just maintain the condition records which are very flexible.
Here we can have condition records based on the access sequence which are flexible and can be used in different scenarios.
This is the Main Advantage of TAXINN over TAXINJ.
Hope you got it.
regards,
santosh

TAXINN and TAXINJ

Do we require Server Upgradation while upgrading our tax procedure i.e. moving from TAXINJ to TAXINN ????

Dear Digambar,
I´m not sure if I understood bery well your doubt, by the way, please verify the answer below:
The SAP strongly reccommend not to move from one tax procedure to other as
the old Purchase Order created with the TAXINJ can not be seen (Taxes).
You can use the TAXINJ procedure and add all the new conditions
suggested for the TAXINN to your existing Pricing procedure (SD). For MM
you will have to follow the Formual based excise (TAXINJ) and SD you
can have the tax procedure as TAXINJ and put the new conditions.
What will be the impact on the previous Purchase Order which are clos
ed completely up to LIV?
You can not see the tax values if you change the tax procedures.
Regards,
Paulo

TAXINN and TAXINJ -difference

Dear all ,
would you please tell me whether TAXINN can be applied to SAP release 4.6C.As I understand that the TAXINJ is formula based taxprocedure and was most commonly used till version 4.7 what was the reason not to use TAXINN before that ?
Would you please explain is detail .
Thanks in advance.
Sunil

TaxINJ was the procedure which was used earlier to 4.7. This was based on the formula based approach even though the condition technique was introduced in the 4.6C version I think.
The condition based approach until ecc 5.0 did not work perfectly. Thats the reason why it was not popular. Also there was some inconsistency in the way the system determined the tax vaues. In the TAXINJ based on the formula based approach the records for excise and tax was maintianed though tax codes in finance transaction FTXP. This had little flexibility in that the number of combinations for excise and ST/CST was very large and a large number of tax codes need to be maintianed which was cumbersome. It was also very complex and should you wish to change the basis for the values it was difficult.It was totally a tax code based approach.
But it worked O.K though on the export side there are still a lot of things not yet ironed out by SAP even now.
When it came to condition technique it was a refreshing change. It was simple bold and flexible in that you could maintain your your condition using a variety of criteria i.e sales org, country, plant, chapter id , material .....
This offered the company a great flexibility. But the condition value still references to the tax code here which is a dummy tax condition which is required for maintian condition values. each of this condition values is unique unlike the previous where all the taxes are maintained in a single code.
If you want to change the tax rate basis its pretty simple. Just use a different access.
Thats the basic difference. There are other differences too but this is the essential.
regards
Jude

Diff betwn TAXINN &TAXINJ

hi,
can any one explain me in detail, what is difference between the taxprocedures TAXINN and TAXINJ.
Regards,
velu

Hi
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
SAP recommends usage of Condition based Excise determination.
Definition: condition-based excise determination
A method that the system uses of determining excise duty in India.
This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
Definition: formula-based excise determination
A method that the system uses of determining excise duty in India.
This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
Hope this helps
Thanks & Regards
Kishore

TAXINN to TAXINJ

When trying to change the tax procedure from TaxINN to TaxINJ. I assigned the country to tax procedure. When I trying to maintain tax in T-code - FTXP all the fields are in display mode only. So I cant able to maintain the percentage rate. urgent...........
regards
Anand

Hi,
Please go through this IMG documentation from SAP.
It is not advisable to change the tax procedure once you started the transactions.
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. *Note that once you have started using a tax procedure, you cannot switch to another one* otherwise you will not be able to display old documents.
Regards,
Rambhupal reddy

Migration from TAXINN to TAXINJ

Hello Experts,
My client is currently using TAXINN procedure. Now they are planning to migrate to TAXINJ Procedure.
I would be very helpful if you can guide me to let me know the effects of changing tax procedure to TAXINJ from SD and MM perspective.
This is an urgent requirement. Please let me know your inputs.
Thanks and regards
AB

In one of my earlier projects, a similar requirement came from client (TAXINJ to TAXINN) and when I checked with SAP, following are their comments:-
Please kindly note that changing over from TAXINJ to TAXINN is not recommended unless you are going in for a complete reimplementation & not just a technical upgrade.
They have also confirmed that there is no specific note on this process.
So in your case, if it is not complete reimplementation, then you should caution your client.
G. Lakshmipathi

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

Diffrence betwn. - TAXINN and TAXINJ

Similar Messages

Maybe you are looking for