Diffrent Exchange rate type for 1st Local Currency

Hello,
I have following problem:
E.g.
One company code in Germany having Local Currency as EUR and Another Company Code in France having Same Local Currency as EUR.
If i am posting transaction say on 12/09/2008 in USD for both company code and Exchange rate in Two Countries are as follows:
Germany -EUR to USD -1.25 on -12/09/2008 EXRTTY: M
France -EUR to USD -1.50 on -12/09/2008 EXRTTY: M
By default system picks up "M" exhchange Rate Type [EXRTTY]. And we cannot change exchange rate type for Currency "10" Local Currency.
Please help me how take care of such situation.
Regards,
Manish

Hi,
No i want system to pick diffrent exchange rate so i want to change exchange rate type for 1st Local Currency.
But that area is greyed out. Is there any system setting where i can maintain diffrent Exchange rate type for 1st Local Currency instead of "M". or is there any other way out that system will pick up diffrent exchange rate.
Problem is that two entities are operating in different market having same local currency but conversion rate for Foreign currency will be diffrent e.g. Local Currency EUR Exchange rate between EUR -USD in France 1.20 and Exchange rate between EUR-USD in Germany 1.25.
Is there any wayout to deal with such situation.
Please suggest.
Regards,
Manish

Similar Messages

Using Diffrent Exchange rate Type for Payroll

Hi All experts,
We wish to use a different exchange rate type for Payroll currency conversion. As we all know that the Payroll driver uses the currency coversion rate M and is hardcoded in the standard Programmes.
Now please suggest me whether it is possible in any means to use different currency conversion rate for Payroll?
Also we have explored the Global payroll, but the same has been not yet released for all customers, can I use it as it provides with the option of choosing exchange rate type on a particular date and have standard excahnge protection IT.
Awaiting guidance from u all....
Thanks in advance
Regards
learner

Hi,
No i want system to pick diffrent exchange rate so i want to change exchange rate type for 1st Local Currency.
But that area is greyed out. Is there any system setting where i can maintain diffrent Exchange rate type for 1st Local Currency instead of "M". or is there any other way out that system will pick up diffrent exchange rate.
Problem is that two entities are operating in different market having same local currency but conversion rate for Foreign currency will be diffrent e.g. Local Currency EUR Exchange rate between EUR -USD in France 1.20 and Exchange rate between EUR-USD in Germany 1.25.
Is there any wayout to deal with such situation.
Please suggest.
Regards,
Manish

Utilizing different exchange rate type for same currency combination

Hello Gurus,
I wanted to get your opinion/experience in handling the following scenario.
We have company codes in different countries operating using different local currencies. There is alternate exchange rate type EURX defined for Exchange rate type M for many currency combinations due to business requirements. One country with local currency EUR is utilizing EURX SEK - EUR exchange rate combination.
Other country with local currency HUF is making use of exchange rate type MNB as an alternate exchange rate. In one of its transaction, where VAT is being calculated on its foreign transaction, HUF company is trying to seek rate of MNB SEK- EUR where country currency is SEK and document currency is EUR.
But since on the 'translation ratios for currency translation' table EURX being the alternate currency for that particular combination, even when we set MNB SEK EUR exchange rate, the system is obviously picks up EURX rate.
Has anyone come across similar scenario where different countries trying to get different exchange rate types for the same combination of currency? and If so, how would that be possibly handled through config or using something custom?
Thanks all for your replies in advance.
Regards,
Sagar K.

Hi Sagar,
In tcode OBBS, if Alt.exchange rate is used for any currency pair, then that rate is used ( EURX in this case).
All countries in EMU region uses EURX ( which is mostly fixed after introduction of EUR).
If the company is in different countries in Europe, then mostly EUR is used as Alt. exchange rate. which uses EUR as reference currency.
Ther is no country specific settings in std. sap for a currency pair.
Cheers,

Exchange rate type for version - error message GP541 during confirmation

Hi FICO Experts,
I bumped into a problem during confirmation in CO15. (I would like to get the SFG by mvt 101 and consume the raw material by 261).
The error messase I get is:
Maintain the exchange rate type for version 000 in 2009
Message no. GP541
Diagnosis
You want to use plan version 000 with controlling area 1000 in fiscal year 2009.
You have not specified an exchange rate type for this plan version for fiscal year 2009. Since the update of all currencies in 2009 is active in the control indicators of the controlling area, currency conversions are possible and sometimes also needed.
It is therefore necessary to specify an exchange rate type for plan version 000 in year 2009.
System Response
The system will not accept your entry.
Procedure
1. Please maintain plan version 000 first using the function 'Change Plan Version', or
2. correct your typing error.
I'd like to ask you to please help to resolve this issue.
Thanks,
Csaba

go to Maintain Version at SPRO-Controlling-General Controlling-Organization->Maintan Version and do what ever it says. Provide Exchange rate type P or M would resolve your issue

Exchange rate type for posting to Controlling

Hi
We are using Currency type as 20 in Controlling Area. We have several Company Codes and each have different currency.
While posting entry from FI to CO , the system always take exchange rate type as M.
Please let me know whether we can assign some other exchange rate type for actual transactions.
Thanks
Gaurav Jain

Hi
Goto TCode OBA7 and select your document type (usually SA ) and enter in Field "Ex.rate type for forgn crncy docs" your required exchange type.
Cheers
Srinivas

Needs Diff. Exchange rates type for sales trans and Purc Trans

Hi Gurus,
My requirement is that for a same foreign currency i need to pick two different rates one for purchase related activites and another for sales related activites. is that possible in standard SAP.
Example of my scenario:
My company code currency is INR.
on 10.09.2007 if i make purchase of goods in USD system picks the rate i maintain for usd from the exchange rate type "M".
On the same day if i make any sales in USD system is picking it again from the same exchange rate type "M', but i want to pick it from exchange rate type "G".
Kindly Advice me what to be done.
Thanks and Regards
Karthik

Hi,
For SD related transactions, you can maintain the exchange rate in Customer Master - Sales Area Data. In Sales Tab you can maintain "Exchange Rate Type" for transactions related to that Customer.
Probably, for MM you can continue with the standard M.
Thanks
Murali.

User-Exit to modify exchange rate type for Accouting document

Hi,
My requirement is as follows.
I am creating an incoming invoices which in turn creates an accounting document.
The document currency for the accouting document is different from the Company code currency. In such a case, the "Exchange rate type" provided in the customization of the "Accouting doc type" is picked up and the exchange rate is determined for the conversion.
I need some user-exit/badi/bte where I can override default "Exchange rate type" for my accouting document.
Regards,
Abhishek

Provide the exchange rate in the BAPI to create the incoming invoice document.

Different Exchange Rate Type for Vendors and Customers Invoices

Dear Friends,
We have configured different exchange rate types for Accounts Payable and Accounts Receivable thru T Code OB07. What are the additional Config steps required to ensure that the respective buying and selling rates will apply to Accounts Payables and Receivables. We do not want to stipulate the exchange rate types in Document Types as this special exchange rates are applicable only for one of the Company Codes.
Would appreciate your help in this regard.
Regards,

Hi,
Then you can use a different document type for those company codes and can default the exchange rate type there.
OR,
The alternative wya is to use the substitution in OBBH/ GGB1 for those company codes with exit programming.
Regards,
SDNer

Custom Exchange Rate Type for Purchase Order

Hi
Our Financial Team doesn't want to change the Exchange Rates on a daily basis, but for place purchase orders with our overseas vendors we need the daily spot rate loaded in the system.
Is there way to configure a different exchange Rate type ? and use this Exchange Rate Type for Purchase Order to use instead of Default type "M"?
Thanks...

Found a soluntion ...
I have coded userexit EXIT_SAPLMEKO_001 component LMEKO001, to fill in Exchange Rate type in the Communication Structure "e_komk-kurst".
Update Exchange Rate Type "ZCUS" under SPRO and updated exchanges in TCURR table for this type. Then, everything else works like a charm.

Different exchange rate type for PO

Hi,
I have a requirement, where I need to take a different exchange rate type for one particular PO document type.
I have already maintained exchange rate type Z in Tcurr table.
I should enable system to pick this exchange rate for PO wich are created from a PO document type
Same exchange rate should be picked for GR and IR as well.
If I overwrite the PO exchange rate in PO header, GR and IR are picked default M exchange rate type.
If I maintain Z exchange rate for doc type WE and RE, the same would taken for all POs GR/IR.
I should make it available only for a PO document type and relevent GR/IRs.
Can you please advise how we can achieve this.
Your help in this regard is much appreciated.
Thanks,

Any Advise.

New G/L using an other Exchange Rate Type for Local ledger

In new G/L ledger we want to use for a Local ledger a different Exchange Rate Type then the standard M. This is for local reporting to the goverment
Is this possible and yes where I can make this setting?

Hi Paul Annotee
In T.Code: OB22 you can maintain another parallel currency say HARD Currency (40), and make this as identical to your local reporting currency... for this new currency you can maintain a different Exchange Rate Type
Regards

Avoid posting of realized exchange rate differences in 2nd local currency

Dear SAP fans,
The situation here in our company is that a company code is set up with NZD as 1st and EUR as 2nd local currency (currency type 30 "Group currency" for EC-CS consolidation).
Therefore, all postings (and balances) are also translated and saved in EUR (with the current exchange rate).
We now have an open item managed G/L account for prepaid expenses, which is used to collect postings which are then cleared later. It's however no payable/receivable account for vendors/customers. Therefore, it doesn't make sense to post realized exchange rate differences when clearing this account. This is however what SAP wants to do when we try to clear it.
For example, if I post today 100 NZD and two months later again 100 NZD to this account. If the NZD vs. EUR exchange rate changed in the meantime, then SAP won't let me clear this account without posting realized exchange rate differences, which makes however no sense.
Does anyone of you meet this problem before? Could you please give me a hint?
I thought about setting the "Only balances in local currency" indicator in the G/L account master but this helps only for differences between local and document currency (and not for differences in 1st and 2nd local currency).
Any help is highly appreciated!
Thanks and best regards,
Peter

Dear Padma,
Thanks for your answer. The customizing activities you mentioned are already set up in the system. This is not our problem.
The problem is however, that we don't want SAP to post automatically realized exchange rate differences between 1st and 2nd local currency as this doesn't make sense in this business case.
It's about an open item managed G/L account which is used to collect posting which are later cleared. It's not a payable/receivable account for customers/vendors where the posting of realized exchange rate differences makes sense.
We've thought about several solution which unfortunately all didn't help us:
- Don't setup realized exchange rate differences accounts or set them up only for group currency (in OB09)
- Set indicator "Only balances in local currency" in G/L master data
Best regards,
Peter

Exchange rate type for planning cost

Hy all,
our release is 4.7 .
Is it possible to change now the exchange rate type from M to P for costing and fix a budget figure valid for the whole year to evaluate standard cost?
Thanks in advance
Vir

Dear Vir,
http://help.sap.com/saphelp_nw04/helpdata/en/a8/352537b1d21763e10000009b38f889/frameset.htm
You can define the exchange rate for a currency pair using either direct or indirect quotation.
Indirect exchange rates are always given with the local currency or reference currency as the to-currency.
Hope this will help.
Regards,
Naveen.

Diffrent Exchange Rate Type

Hello We have two company code and we want saperate Exchange Rate Tyep for both the company codes, both the companies are exist in saperate country.
If any one knows any methid how to maitain the saperate exchange rate for both the company code, as usual by defoult system is taking M exchange rate for PO creatiion and Other document.
Regards,
Harry

Hello Srikanth, Giridhar,
Thanks for your reply,
But in my case if i will maintain exchange rate type at document level then it will be applicable for both the company code hence i could not aply this way.
I have one compnay code for Hoilland Compnay 2000 & Second for Switzerland 1000. Both the companies should have local & Copany Code currency as EUR but for both the company code exchange rate should be different as per rate provided by their banks.
hence request you to please inform if any user exist or BADI is ther to over write the exchange rate M by any other exchange rate at the time of MIGO or PO creation & Sales Delivery.
Thanks & Regards,
Harry

Exchange rate type for vendor invoice

Hi,
How to know which exchange rate type is being considered during postings vendor invoice in foreign currency.
Company code currency is EUR and I am posting an invoice in USD.
I checked OB08 and exchange rate with type M does not match with one calculated in FB60.
I checked document type KR (OBA7) -exchange rate type 'M' is mentioned.
I checked additional currencies for company code (OB22) - all currencies use exchange rate type 'M'
So how to check which exchange rate type is being used by system.
Thanks.

Hi
For posting vendor invoice which doc type are you using. If other than KR check that one also in oba7. And for OB08 you have to check for Ex rate M from EUR to USD what is the curr rate.
Regards
Mani.S
Edited by: smanimba1 on Nov 28, 2011 5:49 AM

Diffrent Exchange rate type for 1st Local Currency

Similar Messages

Maybe you are looking for