Diffrent language set on Public Conn when launching Viewer

Hi !
I'm launching Discoverer Viewer through Discoverer portlet using public connection.
When i created the connection i set the Locale to use other language than English but when i access the Viewer it takes the default language - English.
I made another test where i try to connect directly through Discoverer Viewer page, i set the same locale language and it worked ok.
On the client machine i set the regional settings, i added the language to the browser but no success.
Does somebody have any idea how i can make this working ?
Thank you,
Dani

HI
It seems that is a bug; this i found on metalink
"Bug reproduced. It looks like we do not use the language set in the public (or sso private) connection, but use the language from the publisher.
Currently the provider supports only 1 language in which
portlets were published. "
In this case i have to wait for another patch/version.
Regards,
Dani

Similar Messages

All is set up ok but when I view a home movie the apple tv reverts to the menu at random times, sometimes every 30 secs or so, sometimes plays for mins before cutting out and then i have to enter menu, go to movies and select the movie then resume play bu

Whwn viewing home movies the movie cuts out back to the general menu at random, forcing me to enter menu again, reselect the movie and hit resume button.
this happens everytime I try to play a movie, maybe after 1 min of play then again after 3 mins, next time it might play for 6 mins then cut out and so on. The macbook pro is not reverting to sleep mode or closing down and the wifi signal is strong. So is the apple tv an expensive load of junk or what?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

How can I change the language setting in iTunes store

I am using a french iTunes store but I would like to have the language set in English.
especially when it publish my acitivity on Twitter. it all in French!
Thank you!

I am using a french iTunes store but I would like to have the language set in English.
Click the round flag icon bottom right corner of the iTunes Store window then select USA in the next window.
Help for changing language settings on Twitter here > https://support.twitter.com/articles/119137-how-to-change-language-settings

Language Bar appears when launching apps on RD Client on iOS devices

When using the RD Client app on iOS devices to launch programs from a Remote Resource Feed we always get a language bar appearing on the screen. The language bar doesn't appear when using RemoteApp from a PC or if I login into the server directly, only when
using the iOS app.
The language bar also shows the default language as English US which is not the default. In Language screen in Control Panel we only have English UK listed. The Welcome screen and New user setting is also all set to English UK, the only place I can see English
US is in the Override Windows display language drop down menu in the Advanced Settings.
I am assuming the language bar is showing because it some how thinks English US is the default but not sure how to remove this. The language on the iOS devices are also English UK.
I have tried re-creating profiles and also actually adding the English US keyboard then removing it but neither worked.
The RemoteApp server is Windows 2012 R2.
Any help/ideas appreciated, thanks.

Hi,
Thank you for posting in Windows Server Forum.
Please try following script to control and hide the language bar.
You can also control the language bar by using a logon script to set the ShowStatus value. Here is a sample script to disable the language bar:
Dim WshShell
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell. RegWrite" HKCU\Software\Microsoft\CTF\LangBar\ShowStatus", 3, "REG_DWORD"
Also can try to create following registry setting.
Hide Language Bar:
[HKEY_CURRENT_USER\Software\Microsoft\CTF\LangBar]
“ShowStatus”=dword:00000003
More information.
Multilingual Images, Language Packs, Language Bar Settings
http://blogs.technet.com/b/education/archive/2010/04/12/multilingual-images-language-packs-language-bar-settings.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How To Set Third Party Media App Is Default When Launched From Default File Manager

I use rock media player, which can encode & decode The Video and audio files i use, unlike the phone i have, i don't receive the option to set the app as the default media player. I would really like to be able to use this app on the thrive as it is some much a better media player than the thrives defaulty app. Rock player is the name of the app, who do set it as the default player when launched from the default file manager.

From my experience playing with the Thrive, when you attempt to watch a media file, it will open a menu asking you what application to use. From that popup, you can set a default.
- Peter

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to display asia language title when launch application?

jnlp is ：
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0+"
codebase="<%= codebase %>">
<information>
<title>应用程序</title> //this is asia lanauage title
<vendor></vendor>
<description></description>
</information>
when launch app，the title showed as □□□□□， does i must convert asia language to unicode？

your jnlp file starts with:
<?xml version="1.0" encoding="utf-8"?>
but is this title in utf-8 encoding ?
/Dietz

FRM-41213 : Error raised by a form when launching report on the same server

Hello !
I get this error FRM-41213 when launching a report via rp2rro.rp2rro_run_product.
I don't want to set the report server in a var or property into a library or a form cause my app is to be sent to customers who will not have the sources files.
This app is a migration from an app 10g to 11g.
In 10g whe hadn't to set the ReportServerURL ... But in 11g it can't be ok if we don't set the server URL (with the URL it's ok)
The 11g Report server is running on port 9002, and the form server on port 9001 on the same machine. But the two server are accessible by an ohs on port 8888.
What the f**k ?
:)

Hi
I don't run my reports using rp2rro.rp2rro_run_product but in both 10g and in 11g have always needed to specify the name of the report server.
We have used different methods for different clients/customers. At times we have stored this name in a table in the application, other times in a pre-defined file on the server which we read using text_io.
HTH
Tony

Right now my ipod is set on 'music'. When I push the menu button, it will not go back to the main menu's, but I can still go to all the music and play it.

Right now my ipod classic is set on 'music'. When I push the munu button, it will not go back to the main menus, but it will still go forward and select and play music normally. I tried resetting it by holding the menu and center buttons until the apple logo appeared, but the problem is still there.

If your battery level is low, recharge it first for at least 2 hours, preferably 4 hours.
After the Apple Logo, you release the buttons, what do you see on the iPod screen? (language selection?)
Have a nice day!

Where is the language setting in pages 5.0?

please can someone tell me where is the language setting in page 5.0. this is for the purpose of spell check, for example, change british english to american english, the word "personalized" is red-underlined because the current setting is in british english, how can i fix this? thanks.

hmm this seems like to resolve the problem only temporarily.
when i shut down pages and reopens, it jumps back to the british spelling. how can i make this fixed to the american spelling?

"system cannot find the file specified" when launching a java app

Hi,
we are receiving an error message saying "The system cannot find the file specified" when launching a java app on a server. Exactly the same configuration on another server does not give the same problem.
The dialog box with the error message only presents one button - OK - and after pressing the button the app continues to run normally. This however is a big problem for us as we are trying to convert the apps into system services using the wrapper (http://wrapper.tanukisoftware.org).
Note: the problem exibits itself with and without the use of the wrapper.
I am not very comfortable about reinstalling the JRE on a production server. Is there any way to see what file it is missing? Debug options or something similar?
The JRE in question is 1.4.2_06. Many thanks in advance for your answers.

if not setting Post-Processing option results in a cryptic error why doesn't Adobe do one of at least three things?
1. Don't let user click Export on Export dialog if nothing's selected for Post-Processing.
2. Default Post-Processing to Do Nothing
3. Give the user a hint as to what the problem is when the error occurs instead of issuing cryptic error message.
Allowing this error to persist for so long is ridiculous.

Error when launching Photoshop - cannot modify scratch disk preferences

Hi all,
I recently installed photoshop CS5. When launching it I get the following error:
'Could not open a scratch file because the disk is not available'.
I went on this forum and found out several threads relevant to that issue. I did the following to try to fix the problem:
Did a clean uninstall of CS5, made sure no file pertaining to CS5 were remaining
Reinstalled CS5
As the problem was still occuring I did the following (as hinted in the threads)
I reset the photoshop preferences according to http://forums.adobe.com/thread/370735?tstart=0
I modified the setting of the drive HD (read & write everywhere, share folder checked)
I then tried to change the scratch disk preferences (launch photoshop then click Option+Command+Shift)I can select my disk but the selection does next time I try it is still the same (c.f. screen shot): first = startup, second = none, etc.)
I would really appreciate if someone could help me on this one.
Thank in advance,
Francis

I have one drive, but the point is rather that when I select it (=macintosh HD), it is still Startup that appears in the menu as depicted above on the next launch.

Error when launching .rdp file from RDWebAccess with RD Gateway "NtlmWebAuthException: 2" on Mac Version 8.0.8 (Build 25010)

When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version 8.0.8 (Build 25010).
The following is the use case:
Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
This same setup works on Windows using the Remote Desktop Connection client.
I found that if you edit the .rdp file and add the following line (no quotes):
"username:s: "
Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
Example failing RDP file:
redirectclipboard:i:1
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
devicestoredirect:s:*
drivestoredirect:s:*
redirectdrives:i:1
session bpp:i:32
prompt for credentials on client:i:1
span monitors:i:1
use multimon:i:1
remoteapplicationmode:i:1
server port:i:3389
allow font smoothing:i:1
promptcredentialonce:i:1
videoplaybackmode:i:1
audiocapturemode:i:1
gatewayusagemethod:i:1
gatewayprofileusagemethod:i:1
gatewaycredentialssource:i:0
full address:s:RDCB.COMPANY.COM
alternate shell:s:||Notepad
remoteapplicationprogram:s:||Notepad
gatewayhostname:s:rdgateway.COMPANY.com
remoteapplicationname:s:Notepad
remoteapplicationcmdline:s:
workspace id:s:RDCB.COMPANY.com
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
alternate full address:s:RDCB.COMPANY.COM
signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB

Hi,
I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
into the file as it is downloaded via the RD Web Access page.
I know that I can edit the RDP file after the event and then send it to my users but I don't want the
hassle of doing this,
The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information"
Anybody have any ideas?
Thanks,
Jaggie

Enable button in File Toolbar when launching in Internet Explorer

I have an installation of Acrobat Reader 8 installed using an MST file on several Citrix Servers. Also a hidemenu.js file is configured to show /hide some specific items.
When I open a PDF file all the items are showed/ hide as configured in the hidemenu.js file. So far so good
When launching Internet Explorer and open a pdf file in the browser some buttons are missing. We need the E-mail button from the File Toolbar by default. This button is there when I open the application outside Internet Explorer. The user can enable the E-mail option using the File Toolbar, but this setting is reset when the user has logged of.
Can somebody please explain how to enable this option (or any other option from the File Toolbar) when open a pdf file in Internet Explorer by default?

Hi,
In the screen which shows you the dump, you will have a button debugger. Click on that and find out the field that is passed to 'obj'. It should be of character type and it is passed as Packed Integer in your report. Change the data type to 'C' and check it.
Regards,
Sharmila

Javascript error when launching XFA pdf from browser

Hi all,
I am trying to use my XFA PDF from a browser. On my local system I have set up a web server and am launching my PDF from there. However, I am getting a ReferenceError with regards to one of my Javascript functions.
My PDF has dependency on a javascript file that resides in the Acrobat path as follows:
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Javascripts\
When I use my PDF directly from an Acrobat instance, everything works fine. The issue comes up only when launching from server. How do I link the javascript file to my PDF?
Edit: The user is going to be launching the PDF from the server via a web browser. In such a case where do I place the javascripts?
Help appreciated,
Thanks

@George: thanks for the quick response!
My JS code contains a readFileIntoStream which I learnt is also to be run under privileged context. (still learning the ropes here.. ). I have been trying to incorporate the JS code directly into the PDF to get around this privileged context.. but I am unable to find a non-privileged equivalent for readFileIntoStream..
Basically my users would be accessing the PDF from the server direct via the browser. For my testing purposes I am able to run the PDF directly from my desktop via an Acrobat instance without any hitch as the scripts are folder level like you mentioned. Is it possible for the users to be able to access the javascripts from anywhere on the server rather than directly from the PDF? Please note, users will not be saving copies of the PDF on to their local machines (in which case we could have pushed the JS file along to their machines) . I need to ultimately run the PDF from browser.
I hope I am clear..
Thanks.

Diffrent language set on Public Conn when launching Viewer

Similar Messages

Maybe you are looking for