Diffrent prints of same pld layout from diffrent printers

Hi
I have freezed one sales invoice pld for a pre printed invoice.
When i print it from one printer then it shows exact print on the pre printed paper as desired.
Now on another system and printer i use same pld, it shows different print and there is a lot variation of print from two different printers though the paper setting for both printer is A4.
Plz suggest me how to solve it.
Thanks

Hi Pari ,
Priprinted format are printer dependent , driver dependdent , however page size is same , the format will change .
So every time u change the printer u have to make the settings again .
Every [printer have there own settings like to margin , bottom margion , where the printer start to print and others lot .
rgds,
Premraj

Similar Messages

How to print one sales order output from two printers using single command.

Dear all,
Our requirement is to print single sales order from two different printers, where as one printout for sales order output and another for sales order cash receipt.
We developed two smartforms for both outputs.
But we are struggling to assign the smartforms to single document type, which has to result two printouts after saving the sales order.
Please help us to solve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Hi,
You should define two different output type for your requests, one is for SO output, the other is for SO cash receipt. That's okay!
Good luck
Z.T

Crystal Report unable to print out throught Remote Desktop from server

Dear All Expert,
I am facing problem when print a crystal report layout from SAP B1 8.8 through Remote to Server, print to Client machine. It will promt out Error Message "thunking spooler apis from 32 to 64 process has stopped working fix", but if print PLD, then it is work. Any Idea? Client machine using Windows 7 facing this problems, earlier using windows XP is fine. Thanks a lot.

Hi Gordon,
fyi, I have Turn Off UAC for the client machine (Win 7 32 bit), do the checking from command prompt (srf/scannow), uninstall the printer driver and reinstall the correct printer driver for server (windows server 64 bit), client machine (win7 32 bit), reboot the machine. Do the setting from internet option > Advance>
1. Allow active content fro CDs to run on My Computer*
2. Allow active content to run files on My Computer*
3. Allow software to run or install even if the signature is invalid.
But all of the above could not resolve the problem happen. It happen only print SAP B1 8.8 crystal report layout. Others PLD layout is able to print. Please Advice.

Smartforms layout printing diffrent in diffrent printer

Hi,
I have a layout designed in Smartforms. Till now it was printing fine from a specific printer but when using diffrent printer it is not printing well. Major issues are:barcode not showing, Font size is bit smaller & some text from the right hand side is missing. Is there any printer issue we need to fix or do i need to design diffrent layout for this printer? Please advise.
Rgds
Sid

We are having a similar problem with SMARTFORMS for 1099 called IDWTCERT_US_1099MISC. We noticed that the print preview after testing the 1099 and the print preview from the SPOOL (trx SP01) shows the 1099 form OK, but printing it out cuts off the right side of the form/image.
There are two things we've tried so far:
1) In SPAD, we have adjusted in the Output Attributes Tab of the DEVICE the area called Additional SAPScript and Smart Form Information. Here, the horizontal move can be entered as a -10 (in millimeters) for instance.
This didn't work for us, as it only shifted the truncated image to the left 1 CM.
2) Before printing from the spool in SP01 we changed the printer from the device type to be LOCL. This worked well, but we are not sure that it will work well when they print the 1099s in the production run.
I'd love to get some more feedback on this issue to see if using LOCL is the best way to do this, or if I can shift the background image or something. Shifting the background image would be difficult, however, not to mention it would make all the SMARTFORM fields on the 1099 print in the wrong spot.
Further ideas?
Jeremy

How can i duplicate a document print layout from one DB to another DB?

hi experts,
I make all document print layouts in a test DB, and now I want to move them to my production DB.
is there any easy way to copy a document layout from a database to another? please advise, thanks a lot.

Hi,
There is one more option
1.Open the PLD in the test database
2.Go to edit-> select all(including hidden fields)
3.Go to edit->Copy
4.Log off from test system(Administration-Choose company-select live database),log in live database
5.Open the corresponding documents system pld
6.Go to edit-select all
7.In the properties window uncheck the visible checkbox(Under General tab)
8.Save layout as different name say <Test>
9.Again open the layout <Test>
10.Go to edit-Paste and save layout.
NB:Don't delete the existing fields,you should only hide them as mentioned in step7

HT201250 if I used external hard disk for backup time machine, is it possible to use that external hard disk to save another else from diffrent computers?

If I used external hard disk for back up time machine, is it possible to use that external hard disk to save another else from diffrent computers?

Welcome to Apple Support Communities
You can do this, but you should make a new volume on your external disk. Time Machine needs a volume that is only used to store backups, so you can't store other data in the same volume as the one you are using for making backups.
If you want to create another volume on your external disk, use Disk Utility to do this > http://pondini.org/OSX/DU3.html Anyway, you should get another external disk to store other files, but if you don't want to, you can create another volume in it

Print 2:1 layout from numbers into pdf zero bytes

Output desired
1 page landscape with page 1 and 2 side by side
Problem: zero byte output when layout changed
Hi before mavericks / last numbers update i used to be able to print a spreadsheet with 2 separate sheets on one landscape page, by choosing print-->print...>layout (2 pages per sheet), then save as PDF. Anytime I choose anything other than 1 page per sheet the resulting PDF file has zero bytes and doesn't work. The print preview in numbers looks correct as well as the print dialogue preview. Something is failing in the export. Any ideas?

Hi lotsokids,
Just to ensure we are all singing the same tune .
A Numbers document consists of one or more sheets (tabs).
Each sheet can have one or more tables plus other objects (shapes, charts, text boxes... ).
A page is a piece of paper in your printer.
Am I right in thinking you have two tables on one sheet?
And you want to line them up within the page margins so that they both print on one page? Screen shot from Print Preview:
Numbers 3 has lost the good old Print View and Layout View of Numbers 2. We are stuck with Print Preview with limited editing options. We can set page margins, orientation (landscape or portrait), page headers and footers, print This Sheet or All Sheets. You may have to drag the Print Setup Panel up to see all the options.
To help align objects within the page margins, click on Done to close Print Preview. Then Menu > Numbers > Preferences > Rulers (and tick all boxes).
Alignment Guides can be dragged from the rulers to show page margins.
See this User Tip on creating a Layout Guide in Numbers 3:
https://discussions.apple.com/docs/DOC-7101
Regards,
Ian.

Hi, i have problems with audiobooks, chapters from diffrent books stand togheter, the book is mixed with another book, does someone know how to fix this

If i synchronise one book there is no problem,
when I sinchronise more books then chapters from diffrent books stand togheter.
In I-tunes the books are not mixed.
In my ipod classic the books are mixed.
I use the latest version from i-tunes
I work with windows vista pro NL

The easiest thing to do is to make a playlist for each book. I have about ten audiobooks on my iPod and have the same problem with everything being put together in one long list. The iPod does not treat each book as it does an album by grouping each audiobook in one folder, it just lumps them all together in one long list.

I am logged into the same itunes account on two diffrent accounts on the same computer, there are diffrents songs on each of the itunes library how do i get the same songs on the librarys on the diffrent computer accounts?

on the same computer on diffrent computer accounts i am logged into itunes using the same itunes account, but on the diffrent computer accounts the itunes librarys have diffrent songs because my sister will buy songs on her computer account and i buy them using itunes on my computer account. how do we make so that we have all of the same songs on both of the librarys without rebuying everything since its the same itunes account?

Where is all of the music now?
Just copy it all to the same computer.

How do I copy the same app folder layouts from one device to another? We have a several iphones and ipads.

how do I copy the same app folder layout from one device to another. We have several apple devices.
It's a challenge when syncing a device for the first time to go through all the apps and apply them back to the same folders as on your other iphone.
I've seen suggestions of taking pictures of the correct layout, then manually applying it to the new device. Big time waister.
What's the work around?
Thank you

I'm afraid there is no short workaround. One thing that you could do if you were REALLY desperate is reset your device to factory settings and then restore it from your other device's backup, but that is rather risky and you probably don't want to take your chances just for folder layouts. I would just do it manually.

AP Check Print: Same PDF O/P prints differently from Different Printers

hi ,
I am working on AP Check Printing. We are upgrading our system from 11i to R12.1.3.
I have developed the Check Template for a US Check, the PDF output generated from the "Format Payments Instructions" look good and prints perfectly onto one printer.
But when i print the same o/p to a different printer, it is cutting off all the edges.
I have verified that both the Printers use Universal Pasta Configuration & the same past_pdf.cfg file.
It has "Prepocess = pdftops - paper match {outfile} {infile}" as the command to convert PDF output file into a PS (Post Script).
I am able to reproduce the problem by printing the PS file from unix using the command "lp - d <printername> <PS File Name>".
Please advice ASAP, this is a BLOCKER issue for us and need to solve this at the earliest.
Thanks in Advance.
VIJAY

Hi,
Thanks a bunch for your quick response.
In order to check the driver, i have seen in the following areas.
System Admin => Install => Printers => Register /Type /Style / DRIVER.
The driver postion is actually depending on the print style like "PDF Publisher" or "Portrait For Logo" etc.
Is this the place you want me to check ? or is there anything else i am missing ?
Thanks,
Vijay

How to call view from Diffrent Components

Hi Experts,
In my application 5 component(comp1,comp2,comp3,comp4,comp5) under one DC.
In Comp1-> View1 have a drop down to select business operations, View Container with empty view while starting.
Ex: one,two, three, four list of values in drop down.
If i select Two from drop down, it should display view from comp2->View1 in ViewContainer.
Like this it should display view from diffrent component in comp1->View1 (Inter Componet Communication).
This application developing in CE 7.1 & NWDS 7.1 not in 2004s..
Please any one help me to do this requirement .....
Thanks in advance..
Regards,
Satya.

Hi,
The simplest solution in this case is to create another DC component.
This will have a single window with (a) ViewSet Container(s). Then you will have to create a window per view in your first DC Component.
After this - you will need to add the first DC component to the second DC component (under used DC Components). This is done by first creating public parts of the first DC and adding to the second, following which you need to right click "Used DC components" in the second DC and select the first. You may need to do this multiple times for different windows.
After this - in your second DC you will need to embed the Component Interface views of each of the windows to the View Set Containers (as created previously).
Next you will need to write some code in the onSelect Action for the DropDown that will manage the visibility of the different views.
Let me know in case there are any further issues.
Thanks.
HTH.
p256960.

My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

Hello, I have exactly the same problem. I could have written the same text. And I have'nt found solutions. Except, perhaps, change this printer (and quit HP?).
Any suggestions would be really much appreciated.
Thank you for your possible responses.

When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

Or, it is set the other way around (which makes more sense). Even though you are in Landscape mode, it is binding on the Long Side of the paper. Since you are in Landscape, you would want it to bind on the short side.
Think of the Binding like a Book. How would you flip the finished pages to read the “book.” Where it would be bound in the imaginary book is how you want it to print.

We have an imac 27, with 2 accounts. We share a Canon 9000 II printer, wired.. If my wife prints a photo it printes perfectly When I print the same pic from my account, overall dark magenta cast. Ideas????

We have an iMac 27, wife and I each have an administrator account. When she prints a pic from iphoto, or from the web, the colors are perfect, they match the monitor. When i print the same pic from my account, there is a dark magenta cast overall. Same printer, same driver, same paper. Using a Canon 9000series II printer, connected by wire. This is a new phenomenon. Using new inks, cartridges are full, all lit. Any ideas what could be causing this weird phenomenon???

When i print the same pic from my account, there is a dark magenta cast overall.
what happens when you print from your wives account?
This is a new phenomenon.
When did this start, when you installed a new OS, applications, new Mac?
A first step is to reset the printer from your account:
Apple Menu > System Preferences > Printers: right click in the list of printers and select Reset Printing System

Diffrent prints of same pld layout from diffrent printers

Similar Messages

Maybe you are looking for