Digi Core Audio Driver and FCEHD 3.0

I'm unable to monitoe FCE-HD via my Digi 001.
Does anyone know why?
All other applications run perfectly through my ProTools system.
Power Mac G4 MDD DP 1.25 Mac OS X (10.3.7) digi 001/ProTools

So that's my answer? Use an older version?
I purchased this HD 3.0 retail just recently. Can someone explain to me how I roll it back to the Core Audio approved version and/or when will Apple make this compatible with the Digi driver?
Very disappointing. The folks at CompUSA assured me all was well with compatability. I guess..not so much.
Power Mac G4 MDD DP 1.25

Similar Messages

Major Bug in Digi Core Audio Driver? Audio Out of Phase in Logic!

In Logic 8.02 did the following;
Using a positive only impulse (only up then decays) I did a loop back test with the both the ADAT port and the analog I/O and both are recorded out out of phase.
Did the same tests in Logic using another Audio device with it's core drivers and all wall well - no phase issues here.
Anyone else find this?

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

Stupid question...where does the digidesign core audio driver belong

hey,
I did something really stupid and took out the digidesign core audio driver and I can't remember where to put it back. I've got a tdm system and never use the digihardware via core audio. now in order to switch from core audio to dae I have to quit logic and reboot where as before I could launch dae from within logic with out having to quit the program. I suspect this is because I removed the digicore audio driver.
any help would be appreciated.
ej

Probably get a faster response on the Digi forums.
Good luck!

Digi 001 Core Audio Manager and Logic 7.1

I just upgraded to Pro 7.1 from logic 5.5.1. When I would start up 5.1.1 it would automaticly startup the coreaudio manager for the Digi. I've noticed now using 7.1 that I have to start the Digi Core Audio Manager before starting up Logic Pro or it will not recognize the Digi at all, and will remove the digi as a sound card selection. Does anyone else experience this same issue? Is it normal? I read into the logic help and it said with a TDM or HD digi hardware this would be necessary. I'm confused help would be appreciated.

Yes, this is normal when using Logic Pro 7.1 and Digi Coreaudio version 6.4. They seem to have fixed this in more recent versions of the coreaudio manager, but 6.4 is the last revision supported by the Digi 001.

Mac G5/Pro Tools 002R Digi Core Audio Won't Launch HELP!!

All of a sudden Digi Core Audio won't launch. Not with I-Tunes, Not With Pro Tools, not with audio through the internet. What should I do? HELP!!
I haven't installed or updated anything. I ran disk utility and I got a message in RED saying
Volume Header Needs minor repair/
Volume Macintosh HD Needs to be repaired.
1. HFS Volume Checked
Volume Needs Repair
Someone suggested I hit the repair button but the repair disk button is grayed out.
What should I do next. I am basically computer illiterate, can you talk me through it like I am an 6 year old.
Thanks!!

Hi, you cannot Repair the drive you are booted from... a silly OSX feature if you ask me!
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
(If perchance you cant Find your Install Disk, at least do the Safe Boot part above).
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Quicktime 7.5.5 in Tiger breaks Digi core audio connection

Updated to 7.5.5 now Quicktime ignores my preference for Digi Core audio when playing movies (even quicktime movie trailers). iTunes plays through the Digi core audio as does all other audio applications, What gives?

Finally I've found a way, which worked well for me (QuickTime 7.5.5 to 7.4.1), go and see that link :
http://www.macquebec.com/forums/index.php?showtopic=3914
and this one to download a previous versions of quicktime :
http://www.finalcutuser.com/quicktime-archives/
But for some users it seems to have crashed everything... I own a powerbook G4 and OS 10.4.11 for info, and it replaced well quicktime 7.5.5 with 7.4.1

Error code -1 was returned by core audio driver

Hello everyone,i have logic pro 7 fully registered and all of a sudden when i try and open any of my songs i get an error message.error -1 was returned by core audio driver?and battery is the only plug-in that has a line through it and it will not open?i rebooted,even tried to open a brand new autoload and everytime i try to load in battery i get the same error message?If anyone has a clue,cause i dont

Try uninstalling 'battery' (I'm unfamiliar with that plug-in) & seeing if you still get error messages. If not, re-install 'battery'; but if the errors recur, you'll have to remove it again.
N.B.: check the installation instructions first; manually removing the obvious components may not be sufficient (you may need to run the installer & select 'uninstall').

Error Code -1 Returned by core audio driver-Please help!

I can't open GB3, each time I try, it gives this message error: Error Code -1 Returned by core audio driver
What can I do?
Intel 2.16, OS: Leopard, and I use Guitar Rig 2 which work fine.

There is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too?

"error code -1 was returned by the core audio driver" battery multi?

working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
"error code -1 was returned by the core audio driver"
everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
any ideas??
thanks in advance.

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Error Code -36 Returned by core audio driver-Please help!!!!

8:03 into my new song and all of a sudden I get a pop up that says "error code -36 was returned by the core audio driver" I click it off and the track continues to play looping 3 seconds of the same thing over and over again as the track continues over what should be correctly playing.
This is in garageband 08' on an up to date G5 intel with plenty of space and NO locked tracks. I also ran disk utility and nothing has helped.
Any idea what is happening and how to save my song?
Thanks for any help!
Message was edited by: Howard Herrick

There is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too?

Error code 25974 was returned by the core audio driver?

hello, well ive been having a problem trying to record one of my dj sets directly from my mixer.
This is my set up: My dj equipment is conected via my mixer to an m-audio ozone midi keyboard (1 stereo in 1/4 TRS jack), this keyboard is connected via usb to my computer (imac g4), and im using logic express 7.0.1 as my recording software.
When i start recording, everything is working ok, i can see the signal on my
m-audio keyboard, and i can see the signal on logic, on one of the audio tracks.
But then, logic gives me an error message:
"error code 25974 was returned by the core audio driver."
and then the signal goes out, and i cant finish my recording session. The portion of the recorded set until the error, is perfect, but i need to be able to record the whole session.
i hope i made my self clear. any help!!! thanks a lot
Imac G4 Mac OS X (10.4.4) 1 g ram

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Removing Core Audio driver

I've recently tried to install the digidesign Mbox to run with garageband, but had no luck. I installed the appropriate Core Audio driver with no problem, but now I can't get it off of my system. I've ran the unistall that came with the download but it still is showing up in my activity monitor as "coreaudiod" and is slightly slowing down my machine. Any thoughts on how to completely remove this driver from my system? Thanks!

What you see in Activity Monitor is the audio driver of the OS.
You might quit it. It will automatically restart if any application that has sound implemented is active.
I've done so when system sounds behave unnormal.

Digi core audio manager problems

Hi i have Digi002 and digi core audio manager as audio interface.
My problem is that after working some time, the DCAM disconnects and i am unable to hear anything. I then have to log out shut my Digi002 down for a few seconds and log in again.
The audio manager version is 7.4
Anybody knows the problem, and a solution?
Matias.

Matias La Cour1 wrote:
Hi i have Digi002 and digi core audio manager as audio interface.
My problem is that after working some time, the DCAM disconnects and i am unable to hear anything. I then have to log out shut my Digi002 down for a few seconds and log in again.
The audio manager version is 7.4
Anybody knows the problem, and a solution?
Matias.
I think you need to ensure the Digi002 is connected properly. IE make sure the cables are connected all the way in, and that there is no other cables resting on top of them.
Also, if you have many FireWire things hooked up to the same computer... get rid of a few of them. This helps the FireWire bandwidth.
Cheers

Digi Core Audio 7. Anyone is using it without problems?

I took ProTools 7.0 but I'm hesitant on installing it, particularly for DigiCoreAudio 7, because I'm using 6.9.2 which works fine with my Logic, and I wouldn't find bad surprises. Anyone is using it with Logic 7.2.2?
Thanks
Fulvio

Matias La Cour1 wrote:
Hi i have Digi002 and digi core audio manager as audio interface.
My problem is that after working some time, the DCAM disconnects and i am unable to hear anything. I then have to log out shut my Digi002 down for a few seconds and log in again.
The audio manager version is 7.4
Anybody knows the problem, and a solution?
Matias.
I think you need to ensure the Digi002 is connected properly. IE make sure the cables are connected all the way in, and that there is no other cables resting on top of them.
Also, if you have many FireWire things hooked up to the same computer... get rid of a few of them. This helps the FireWire bandwidth.
Cheers

"error code-39 with core audio driver"

so I have a 75 minute continuous dj mix I recorded onto garageband... after having recorded this I then converted the file from a 120bpm to a 60bpm speed so as to fit it all in... now, however, towards the end (between 65-70 minutes into it) the mix suddenly is interuppted by a crude digital-type sound. a pop up then says "error code-39 with or in core audio driver"....
what gives here?
I'd appreciate any help you can give.
peace.

does this mean I have to re-record the audio file?
Probably. I guess you could try a commercial disc repair program like TechTool Pro or Disk Warrior, but odds are if the file system can't figure out where the end of file is, the file is hosed --Hang B-(>

Digi Core Audio Driver and FCEHD 3.0

Similar Messages

Maybe you are looking for