Digi@nwhere A/D Plus on Windows XP MCE (not working with Media Center)

I just recently bought a MSI Digi@nywhere A/D Plus from Newegg.com http://www.newegg.com/Product/Product.aspx?Item=N82E16815127008 to replace the WinTV by Hauppage that came with my HP Media Center m7640n, after installing the card and drivers, I am able to watch TV in the ArcSoft application that came on the CD, but using the Windows Media Software
I've applied every possible update/rollup for my Windows Media software, but it just says Quote
"At least one tuner that supports a standard (NTSC) TV signal must be installed to configure the TV signal. Please ensure that your tuner hardware is correctly installed, restart the computer, and try again."
What am I doing wrongly that Media Center is not finding the card? Since my software is the 2005 version, from what I've read supports ATSC, and was listed on the Newegg.com and MSI spec as supported.
Quote
Windows XP SP2 / MCE 2005 / Vista (when using MCE 2005 OS, an extra 3rd party DVD decoder must be installed) / Windows 7
Is the 3rd party DVD decoder required for device use or just for burning to disc?

Quote from: Stu on 30-October-10, 17:38:44
Did you use the latest driver from here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=1948
Yeah, I've got the "Digi@nywhere A/D Plus BDA driver" installed on my PC
and my "device manager" shows that it's currently the 1.345.9.1009
I can view the TV in the ArcSoft TotalMedia software and everything works fine, but Media Center still fails to recognize the card. I'd really prefer Media Center because of it's enhance EPG & recording scheduling over TotalMedia
Is there something more to be done to/with Media Center? Registry edit or 3rd party add-on that I'm missing?

Similar Messages

Windows Radius / NPS not working with mac book pro 10.9.4 wired

Hi,
I'm trying to get my Radius windows server 2012 working with the correct setting for using 802.1x wired connection for the mac book pro. The only issue I'm having is there is not much setting in the mac book pro. I'm not sure what need to setup on the sever to make it connect correctly and assign it to the correct vlan when it's authenticated.
Here are some screen shoots for my mac book pro
So I've got it up to a point where I have this issue and here is my screen shots setting:
So the above are my windows 2012 screen shot settings.
On the mac book pro, I'm getting a prompted about adding certificate and I've added that into the laptop and then I need to put the username and password information. I put the following:
[email protected] and the password.
I'm current working with someone at HP on the switch settings, everything looks good.
I know the following:
1. Wireshark: shows server is getting request from the switch but it's not accepting them here are my logs on the NPS:
RAD01 6274    Information      Microsoft Windows security auditing.   Security            2014-08-21 12:40:24 PM
Here is the detail of the machine:
Network Policy Server discarded the request for a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:                              S-1-5-21-2690993882-1154983957-2264505580-1328
Account Name:                         [email protected]
Account Domain:                                  LCS
Fully Qualified Account Name: LCS\username
Client Machine:
Security ID:                              S-1-0-0
Account Name:                         -
Fully Qualified Account Name: -
OS-Version:                             -
Called Station Identifier:                      b4-39-d6-ec-2c-00
Calling Station Identifier:                     ac-7f-3e-e6-32-34
NAS:
NAS IPv4 Address:                   xx.xx.xx.xx
NAS IPv6 Address:                   -
NAS Identifier:                         5412zl-xxx-xxxxswithname
NAS Port-Type:                                    Ethernet
NAS Port:                                 170
RADIUS Client:
Client Friendly Name:               HP Procurve 5412zl switch
Client IP Address:                                xx.xx.xx.xx
Authentication Details:
Connection Request Policy Name:       Secure Wired (Ethernet) Connections
Network Policy Name:              Secure Wired (Ethernet) Connections
Authentication Provider:                      Windows
Authentication Server:             rad01.xxx.xxx.ca
Authentication Type:                EAP
EAP Type:                                -
Account Session Identifier:                  -
Reason Code:                          1
Reason:                                               An internal error occurred. Check the system event log for additional information.
Again I don't know what's the correct setting the default 802.1x for mac book pro, but it should correct.
I'm also not sure what the internal error message is regarding about. The switch should automatically put me to vlan 7
Can you some please help out what the correct authentication method for mac 10.9.4.
Thanks

Flash Player is a browser add-on, not a standalone application.
You can test if the player is correctly installed at http://www.adobe.com/software/flash/about/

Full version windows 8.1 not working with pc itunes 11.1.1 64bit

Hello guys.
Not preview but the full released 8.1 pro with media centre (windows system - upgraded by windows app to windows 8.1)
I cannot get apple itunes ver 11.1.1 pc 64bit - to load or run - even after uninstall and reinstall.
any clues please ?

Hi debbor-pheonix:
I had the same problem, but another member posted this and it worked beautifully. Let me know if you have any problems.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Hopefully you've resolved your issue already, but if not, it'll work.

Windows phone emulator not working with windows 10 technical preview 9926

I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows. It says "Starting windows phone OS" for like 10 minutes. Then it gives me an error message:
windows phone emulator is unable to connect to the windows phone operating system: The phone did not respond to the connect request. Some functionality might be disabled. And then it will boot up for a little and the home search and back
button wont work and it will never deploy my app then it will crash and bring me back to visual studio. My hyper v is turned on I have checked all the network switches. The emulator used to work with the technical preview but ever since the newest update
it stopped working.
Any help would be appreciated.

Hi mavese,
>>I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows
Currently, Windows 10 is still in the Technical Preview stage, it is not official supported in this forum, and I would suggest you sending feedback using build-in way, please refer to this link:
http://windows.microsoft.com/en-us/windows/preview-how-to#how-to=tab7
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 7 cleartype NOT working with Firefox 6 (it worked with Firefox 5)

As soon as I upgraded to Firefox 6 on Aug 16, 2011 - the Windows 7 cleartype stopped working within firefox.
The text now looks blurry and light. I disabled all addons, tried safe mode. It was always the same thing.
To fix this, I manually downgraded to Firefox 5. As soon as I did this, the cleartype was back. The text was dark, the way it always was.
I have the same addons with both versions and I've tried to repeatedly install both versions, but with the same end result. Windows Cleartype doesn't seem to work in Firefox 6 (compared to Firefox 5).
Firefox 6 is amazing, but non-compatibility with Windows7 cleartype is a big issue. One of the best features of firefox is the tinkering it allows with it's fonts, and the clarity of text it allows. Sadly this doesn't work in Firefox 6.
I've downgraded to Firefox 5 for now. Hopefully this will be resolved soon..

I had the exact same issue after updating. I even resorted to downgrading yesterday after not finding any decent work-around for this, but when it forced an update today upon starting Firefox I just had to clear this up. Here's what you can do:
# Type '''about:config''' in the address bar.
# Type '''gfx.font''' into the filter bar.
# Focus on the following parameters: '''cleartype_level''', '''enhanced_contrast''', '''gamma''', '''pixel_structure''' and '''rendering_mode'''. Forget about the rest.
# Press Start and type '''regedit''' into the search field.
# Once there, choose the following: ''HKEY_CURRENT_USER - Software - Microsoft - Avalon.Graphics - DISPLAY1'' and note down each value represented in the data column within the brackets. For example, my '''ClearTypeLevel''' value is 100, '''EnhancedContrastLevel''' is 400 and '''TextContrastLevel''' is 2.
# Now that you've found these values, go back to the configuration in Firefox and right click on the '''cleartype_level''' parameter, and choose Modify. Now enter that very same value from before (100, for me) in there. Do that with the rest of the values. I put my '''rendering_mode''' as 2, which could coincide with the '''TextContrastLevel''', but it might not, but the '''rendering_mode''' values range from -1 to 5, so see which works for you.
# To change the '''gamma''' and '''pixel_structure''', go back to the '''Registry Editor''' like before, but this time follow this: ''HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Avalon.Graphics - DISPLAY1'' and note the values within the brackets from there.
# Replace those values to the ones in the configuration and you're all set!
If you want to read more about those configuration parameters and their values, [http://kb.mozillazine.org/Thunderbird_6.0%2C_etc.#Font_rendering_and_performance_issues here's] a great article of sorts about it. It's about Thunderbird 6.0, but everything mentioned there correlates with Firefox 6.0.
This is as close as I've gotten to the text looking like it's supposed to and if even this doesn't work for you then I'm open to any and all suggestions anyone might have : /

Zen touch, crashing with Windows XP professional, not working with Windows media pla

i will start with an apology if someone has posted this up before i have just had a quick look and could not see any think about this.
if i turn my computer on with out running any other programs and connect the zen touch the computer automatically turn on the zen touch media player program. this work's fine as long as no other programs are running.
i have tried to work the zen touch with Windows media player but this dose not work and the computer crashes every time.
i have window xp professional and have all up dates from Windows. my computer is very new and has more then enough memory and ram.
please can you help. i am not to happy with the zen touch computer program and would like to know how to fix this problem.
thank you for your help
Rob the monkey

I wonder if there are problems here associated with the use of the zen touch on SP2 machines. Interestingly I cannot transfer music from my PC to my Zen 20gb on a SP2 machine but I can do so on my sisters machine which has got SP. Obviously having the lastest firmware is a good idea though but I believe there are issues associated with SP2 and as you say you have all the latest updates to windows perhaps the problem lies there. Sorry if this doesn't help you at all

Bootcamp only saying "install windows 7" , also not working with install disks

i want to install windows 8.1
as u can see bootcamp only says "install windows 7"
i think that i can't do a usb drive install without deleting everything off the only usb stick i have, right?
so i have an install disc instead, like u used to be able to do
should it be working with a disc?
i have a copy of windows 7 as well, so i even tried to install 7 off a disc and this is the message i get when i have either the 8.1 or 7 disc in the drive and i click "continue"
i also figured it would give me the option of how space to allocate before it asked for the install disk

For Macs with built-in Optical drive, you need the Windows installer on a DVD. What year/model is the Mac? (The option to create USB Installer is missing which is also a clue).
The Windows DVD is identified as 'legitimate'. From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Also, from BC Info.plist...
<key>Win7OnlyModels</key>
    <array>
        <string>MacBook7,1</string>
        <string>MacBookAir3,2</string>
        <string>MacBookPro5,5</string>
        <string>MacPro2,1</string>
        <string>Macmini4,1</string>
        <string>iMac10,1</string>
    </array>

Hp 6500A plus wireless printer = hp eprint not working with pdf

I have a brand new HP 6500 A plus wireless printer.
I tried to print using hp eprint center by sending a pdf as attachement to printers email address.
But the printer doesn't like the pdf and prints a error page instead with below message.
=======
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to latest version of Adobe Reader for windows, Mac, or lInux by
visiting blah blah blah..
=======
I see that i have recent version of adobe reader - Adobe Reader X - Version 10.1.0
Please help and let me know if someone already had a solution.
HP Customer Support - ?
Thanks
Antony.
This question was solved.
View Solution.

Oh..Yes. It worked. !!
Thanks Jack for your inputs, that helped a lot.
The issue was not with the printer, but that the PDF document itself was a secured PDF document.
I tried copying the document from my pc to mac and tried to open the document and what i saw was exactly what got printed earlier in my first post. Tried attaching to my email and when downloaded, the document had just those text that got printed (also pasted below).
Finally got it working when directly printed from the pc over wireless(or wired). Looks good now .
=======
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to latest version of Adobe Reader for windows, Mac, or lInux by
visiting blah blah blah..
=======
Thanks
Antony.

How do I set a time period longer than 7 days for keeping my browsing history on my Macbook Pro? The instructions for doing so on a Windows PC do not work with a Mac.

I am using Firefox 8.0.1. There seems to be no option anywhere in Preferences on my Macbook Pro for keeping the browsing history for a specific period of time. Earlier my history was kept for quite a while. Now it only shows for 7 days at the most, and if I quit firefox, it starts over again fro scratch the next time I open Firefox. Any suggestions? There are plenty of answers out there if you are using Windows, but I haven't found anything for using a mac.

There is no time limit in Firefox 4+ versions for the history.<br />
Firefox determines automatically how many pages can be kept without affecting the performance.<br />
You can see the current value via the reads-only pref places.history.expiration.transient_max_pages on the about:config page.
See:
* http://blog.bonardo.net/2010/01/20/places-got-async-expiration
If you lose the history then make sure that you do not use Clear Recent History to clear the browsing history.<br />
Also make sure that you do not have cleanup software that might clean up files in the Firefox Profile Folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*Firefox > Preferences > Privacy : History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History

Windows 7 Clients Not Working With Web-Auth

I am using 5508 controllers, configured for WEB-AUTH passthrough, Windows XP clients work fine but Windows 7 clients are hit and miss getting redirected to the splash screen.
The login page is customised showing T's & C's with two buttons Except or Reject.
Do I need to Pre-Auth with ACL's? Has anyone had similar issues, or any good doc's etc.
Thanks in advance for any replies.
Jay

Nicolas,
Many thanks for your relpy, the problem is that this is a guest network that's also avalable to the public and I dont have any control over the end clients.
After doing a quick search on the net I found this.
NCSI : Uses a combination of DNS and/or HTTP look ups to tell if you are connected to the Internet. The way NCSI does this is either via a HTTP request for http://www.msftncsi.com/ncsi.txt or a DNS look up for dns.msftncsi.com that resovles to 131.107.255.255.
NCSI does this whether you are logged on or not.
Do I need to Create a Preauthentication ACL on the Guest WLAN interface:-
Configure a preauthentication ACL on the WLAN to allow wireless clients to allow:-
1. Permit DNS resolution (UDP/53) to 213.199.181.90
2. Permit TCP port 80 to 131.107.255.255
Jay

Recently reloaded Adobe Acrobat/CS3 on Windows 8- will not work with printer

I recently trashed my old laptop and reloaded Cs3 on the new one with Windows8. When I open Adobe Acrobat, it will not allow me to "Create from Scanner" because it does not allow me to "Select a Device".
Even though I can print to the same device just fine in Illustrator or Photoshop, Acrobat does not seem to recognize the device.
According to Adobe Customer Care (HA!) the issue is not the activation because it shows I am already activated.
During the initial process of reinstalling CS3, it did ask me to insert my copy of Windows, which I skipped, because this new computer/laptop came pre-loaded and I don't have a disk, per-se.

Most likely an unresolvable compatibility issue. CS3 comes from a time where Win 8 couldn't even be dreamed of, after all. As suggested, update your printer driver and check the permissions on the device, but that's as good as it may get.
Mylenium

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

How to get back to windows 8.1 from windows 8.1 with media center

Hello,
Good Day
I upgraded to windows 8.1 pro preview with media center to windows 8.1 pro with media center via windows store of windows 8.1 pro preview with media center. So, my question is how to remove media center and take only windows 8.1.Can anybody help me please
help me.
Than you
Best Regards,
Kaf

You would need to perform a "clean install" of Windows 8.
Carey Frisch

HP Laserjet 4 plus not working with Powerbook G4 & 10.5.8

I have been using a Powerbook G4 running 10.4.11 with a HP Laserjet 4 plus without any problems. Last week I updated my G4 to 10.5.8. To acheive this, I purchased a full retail 10.1 DVD from Ebay installed it then updated to 10.5.8 using Apples Update Software feature. I believe all the features of my computer work except printing. Previously I have been using an apple wireless network without any problems.
Now when using 10.5.8 I have tried this:
1) select system preferences
2) then select print & fax
3) then click on the plus sign to add a printer
4) the window that shows up that says default, fax. ip, windows, bluetooth, apple talk, more printers across the top of it.
5) In this window the are two Laserjet 4 plus machines listed. One is listed with Appletalk and one is listed with Bonjour Shared. I only own one machine. I have tried selecting both of them separately and each time the same problem continues to happen.
Each time either of the Laserjet 4 plus printers are selected the "Print Using" pull down menu begins searching for new drivers. The gray circular animation just goes round and round and eventually does not do anything. Obviously something has not installed correctly. Or there is a conflict somewhere that I have not been able to figure out.
I have downloaded and installed the HP Laserjet and Edgeline print-only.mpkg from HP's website. The problem still exists.
A family member in my household is using an Intel MacBook Pro running 10.5.8 with this same HP Laserjet 4 Plus on the same bonjour shared network without any problems. This being the case, I am confident the old HP 4 Plus printer will work with 10.5.8 using an apple wireless network.
Any help would be appreciated.
Thank you,
Conrad
NY

The HP 4 printer has a JetDirect card in the back of it. The JetDirect card has a 10BaseT ethernet which I connected with an ethernet cable to an airport express base station. The express unit communicates with the main airport unit in my home.
Many years ago I worked for a company that rebuilt macintosh computers and hardware for resale. I rebuilt this HP printer from spare parts and added the JetDirect card at that time and have not had any major problems with the unit until now. It had no problems or printing errors when I was running 10.4.11.
I neglected to mention that after the printer would not work with 10.5.8 I went back and tried to reinstall the optional printer driver package on the original 10.5.1 installation DVD. When this did not work either, I downloaded the HP print driver package available from their website. Could I have somehow screwed this up by installing the incorrect or uncompatible print drivers?
Thank you for your help. I really appreciate it.
Conrad

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

Digi@nwhere A/D Plus on Windows XP MCE (not working with Media Center)

Similar Messages

Maybe you are looking for