Digi@nywhere A/D

I've just installed a Digi@nywhere A/D in a Dell GX270 2.6GHz w/2GB RAM, 3DForce FX-5200 AGP card and on-board sound. During the setup the TotalMedia application under analog TV shows the sound card options Audio Pin Source and SoundMax Digital Audio. Only the SoundMax has options when selected. These are the same options listed under the regular Windows sound choices. No choices will produce sound. The FM radio part works fine. I did not see anything under the FAQ on MSI's website. Any ideas? All the other applications on the PC work fine and have no sound issues.
Thanks,
OldWolf99

Quote
I borrowed a hauppauge card from a friend. One that also had an analog tuner. Media Center worked just fine with that card.
Which one was that?

Similar Messages

Digi@nywhere A/D Plus, Vista Media Center, Analog cable

How do I configure Vista Media Center to use the analog part of my digi@nywhere tuner card? It will only "see" the input source as: digital antenna. And, since I don't have an antenna connected, all signal strengths are at zero. Besides, the configuration seems to think I only have 16 channels availabnle to me, when in reality I have 30+. THinking this might not be a problem with the tuner card, I borrowed a hauppauge card from a friend. One that also had an analog tuner. Media Center worked just fine with that card. The included ArdSoft TotalMedia software also works fine, but I'd really prefer to use Media Center rather than the TotalMedia.
Thanks,
Dennis

Quote
I borrowed a hauppauge card from a friend. One that also had an analog tuner. Media Center worked just fine with that card.
Which one was that?

Does the Digi@nywhere A/D Plus work with PCI Express ?

Hi guys!
I am planning to purchase a Digi@nywhere A/D Plus for my PC,
but all PCI slots on my K9N Diamond mainboard are already busy,
only the second PCI Express slot which can be used for a second
graphic card in SLI mode (my mainboard uses nForce 590 SLI chipset)
is free to use.
Can the Digi@nywhere A/D Plus work with my PCI Express slot,
which is primarily intended to be used for a second graphic card in SLI mode,
or not ?

you cannot put a pci device in a pcie slot

Digi@nywhere - no QAM in WMC7

Hello all,
I am running a Digi@nywhere AD and Digi@nywhere AD Plus in a brand new quad core amd phenom setup, with Win7 Pro. Windows Media Center only sees these cards as analog (with digital atsc for over the air). It does not see these for QAM. I'm on Time Warner cable. When I run the Total Media software that came with the cards the QAM channels work, but Windows only sees these as analog. Any thoughts? I have a Linksys Media Extender in another room that I'm hoping to use along with WMC, but I would really like to record in digital without having to buy another card. I do have the cable lines plugged into both ports on the card.
thanks,

Analogue or Digital signals?
You might want to try a signal booster between the aerial and the PC to improve the signal quality. For some reason, PC TV tuners are more sensitive to digital TV signals than set-top boxes or those built into modern TVs. Maybe they have some sort of signal amplifier built-in, I'm not sure, but I used a Freeview box here in the UK that received digital TV fine, but I needed a booster when connecting to a PC TV tuner.
Good quality TV aerial cables can help too, the shorter the better.

Digi@nwhere A/D Plus on Windows XP MCE (not working with Media Center)

I just recently bought a MSI Digi@nywhere A/D Plus from Newegg.com http://www.newegg.com/Product/Product.aspx?Item=N82E16815127008 to replace the WinTV by Hauppage that came with my HP Media Center m7640n, after installing the card and drivers, I am able to watch TV in the ArcSoft application that came on the CD, but using the Windows Media Software
I've applied every possible update/rollup for my Windows Media software, but it just says Quote
"At least one tuner that supports a standard (NTSC) TV signal must be installed to configure the TV signal. Please ensure that your tuner hardware is correctly installed, restart the computer, and try again."
What am I doing wrongly that Media Center is not finding the card? Since my software is the 2005 version, from what I've read supports ATSC, and was listed on the Newegg.com and MSI spec as supported.
Quote
Windows XP SP2 / MCE 2005 / Vista (when using MCE 2005 OS, an extra 3rd party DVD decoder must be installed) / Windows 7
Is the 3rd party DVD decoder required for device use or just for burning to disc?

Quote from: Stu on 30-October-10, 17:38:44
Did you use the latest driver from here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=1948
Yeah, I've got the "Digi@nywhere A/D Plus BDA driver" installed on my PC
and my "device manager" shows that it's currently the 1.345.9.1009
I can view the TV in the ArcSoft TotalMedia software and everything works fine, but Media Center still fails to recognize the card. I'd really prefer Media Center because of it's enhance EPG & recording scheduling over TotalMedia
Is there something more to be done to/with Media Center? Registry edit or 3rd party add-on that I'm missing?

Entrada de Nota Fiscal de energia elétrica modelo 6 com 9 digítos

Ola,
Gostaria de entender qual a medida adotada para entrar com uma nota modelo 6 que tem mais do que 6 digitos.
A nota de fornecimento de energia elétrica de SP tem 7 digitos "5754899", e o campo NFNUM tem apenas 6 posições.
Não falamos de uma nota eletrônica.
Sei que no SINTEGRA há uma instrução para registrar os 6 posições da direita, ok, porém o SPED Fiscal no registro C500 já está apto para receber número de nota com 9 posições.
Alterar essa categoria de nota e seu respectivo modelo (6) para eletrônica não me parece correto.
Guardar apenas 6 digítos de um documento que tem 9 dígitos levantou muitos questionamentos do meu departamento Fiscal.
Amigos, como tem tratado este tema?

Olá,
Atuei em com projetos de SPED.
No caso em questão para Energia Elétrica foi convencionado o Modelo fiscal 06, considerando o regulamento de ICMS do Estado de Minas Gerais.
RICMS/ 2002 MG - Anexo VII
10.1.9-A - Campo 08 - Se o número do documento fiscal tiver mais de 6 dígitos, preencher com os 6 últimos dígitos.
No SPED esta previsto o recebimento de Documentos de Energia com 9 dígitos considerando que a nota seja classificada como NF-e de Energia Elétrica com o Modelo 55.
Conforme SPED, o campo 03, registro C500:
"Campo 03 - Valores válidos: [06, 28, 29,55]
A partir da versão 1.03 do Programa Validador e Assinador (PVA) da EFD-PIS/Cofins passa a aceitar a Nota Fiscal Eletrônica, código 55, referente a aquisição de energia elétrica, como documento válido a ser escriturado nesse registro."

Looking for Help with 4 digit access to Droid phone

My droid 4 digit pin access worked last night then I get up this morning NO GO...I am using same password but it will not authenticate. it there a way to reset without losing everything?

Hello fxrs2008,
Keeping personal information safe and secure is one of the most important factors to our customers. This is why I am so proud to see that our devices offer password setup for additional security! May I ask have you backed up all of your information on your device? If so then the factory data reset is the best option to regain access to the phone. I know that’s not what you want to do but it is currently the only solution to be able to use the phone again. If you need the steps on how to complete the reset then here’s a link for you!
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=30946
If you need any additional assistance then feel free to ask as I am available to assist!
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Decimal after two digit in RTF

HI,
i want to print decimal after two digit i.e., 44 must be changed to 44.00 in .rtf
I am able to print decimal after three and four digit i.e., 524 --> 524.00 , 6456 -->6456.00
I am using 0.00 format from BI PUBLISHER PROPERTY but not able to get decimal after two digit.
I want output like this :
4 -->4.00
44 --> 44.00
444 --> 444.00
4444 --> 4,444.00
Note : Output is in Excel
I hope u got my point.
please suggest me solution for this.
Edited by: 914936 on Apr 12, 2012 4:06 AM
Edited by: 914936 on Apr 12, 2012 5:33 AM

Your requirement is to get two decimal digits for all the numbers right?
This should be possible if you goto the field which you want to have two decimal digits .Right click and goto BIP properties. Here in the properties tab you should see the option to format .Select type as number and choose the necessary format.

My remote will not work with my TV @nywhere card, Please help.

I have just installed my TV @nywhere card and it works great. I have all the cables plugged in right but I can't get the remote control to work. I even tried a new battery. I'm running windows XP pro. Any Suggestions?

What's wrong with it is it's broken. The power button is broken. The dock port may be broken. The battery may have reached the end of its useful life.
Make an appointment at the genius bar of your local Apple Store and have it checked out. There are no words that will fix failed or broken hardware other than "here is my credit card"...
An out of warranty replacement for an iPhone 4 is only $149.

TS1741 I am having difficulty connecting my Remote App on iPad to iTunes. It used to work fine, but with latest iTunes and latest Remote, I can't get it to work. iTunes should open a 'pop up' window to add 4 digit code, but nothing happens. Any clues plea

Would appreciate in connecting Remote App on iPad to iTunes. It used to work find, before iTunes 11.0 - but now pop up window to input 4 digit code does not appear. Any ideas how to prompt window to open on iMac? Remote App works OK, but says that Home Sharing is not Turned On, although it is. Both devices are logged into my profile account.

You no longer need the 4 digit code in iTunes 11.
iTunes (10.0.1 or later)
Open iTunes on your Mac or PC.
iTunes 11 or newer: Turn on Home Sharing in iTunes by going to File > Home Sharing> Turn on Home Sharing.
iTunes 10.7 or older: Turn on Home Sharing in iTunes by going to Advanced > Turn on Home Sharing.
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Mac or PC is also connected to.
Open the Remote app (software version 2.0 or later) on your mobile device.
Turn on Home Sharing in the Remote Settings screen. Make sure to sign into the same Home Sharing account you used to sign in to from iTunes on your computer.
Once Home sharing is enabled for both your computer and your mobile device, Remote app will be be able to view and control audio and video playback in your iTunes library.
http://support.apple.com/kb/ht1947

How do I enter 4 digit passcode in itunes using remote app

My Apple TV is out of sync with my iPhones and iPad. I was trying to add new phone with the remote app and turned off and back on home sharing trying to find where to enter that 4 digit passcode the app gives on each devioce when you select Add an iTunes Library. On older version of iTunes when you had the devices on the left you RT click and added 4 digit passcode. On the current version of iTunes I can not find where to do that at all. What am I missing? Running Windows 8 with current version of iTunes as of September 2013. I remember setting the passcode in old version just fine. Remote app is great and I want it working again! And yes everything network wise is working I was using it to start a movie using the iPad running remote app. While trying to get new phone working killed off all device remote access!

There is no passcode to enter.
Why do you believe that a passcode is needed?
Understanding HomeSharing

Software that Works with TV@nywhere

I'd like to hear from others as to what their experiences have been with 3rd party software using the TV@nywhere card. This information may help others who also own this card and would like to experiment with different software.
I own the TV@nywhere Master card, here is my experience with the software listed below. Some of this software can be trained to use the remote control with the program GIRDER. I rely on GIRDER for use with MSIPVS, PowerDVD, and Showshifter.
MSIPVS (WINDVR2) and FM Radio - Work very well. However, recorded shows (no matter what format they are recorded in) have a slight slur in the audio where the levels go slightly up and down. Also, timeshifting often causes sync problems between video and audio. The audio is just NOT steady and stable. Picture quality is very good. Not terribly flexible in recording formats. MPEG-4 support is there but it really sucks and can't be tweaked.
WinDVR3 - Unfortunately this software cannot tune my channels. When it tries to autoscan, it holds the channel for 2 seconds and drops it. This program is unusable. The remote control also does not work with this program; although I've heard there is a workaround for the remote where you can copy files from MSIPVS into the WinDVR3 folder.
Cyberlink PowerVCR - Excellent picture and audio. However, recorded shows have poor audio with pops and hisses. Timeshifting also can have some sync problems. Remote control doesn't work with this program either. Not very flexible with different recording formats.
Snapstream BeyondTV 3 - Wow, very cool package. Even has a built in channel guide that can be used in Canada. Groovy graphics, setup and options. But oh my god the picture quality totally SUCKS. The tv channels are murky and saturated and no degree of tweaking makes any difference. This program is proof that a slick package means nothing without the TV Quality to back it up.
Showshifter - Showshifter has some great options. It also has excellent audio and video quality. The only downfall with this program is that it uses Windows task scheduler to schedule recorded shows. As a result, many recordings don't work or disappear after they've been saved. If this program had a built in scheduler such as PowerVCR or WinDVD, it would be a terrific solution. On the other hand, if you don't record shows all the time, this is an excellent solution for the TV@nywhere card. It allows recordings to be created in VCD, DVD, SVCD, AVI (Divx), etc. etc. Excellent options. The program generally keeps CPU usage between 13-20% and the recording quality is superb. If you install Girder, you can even use your remote control with this program by adding the appropriate group.
IUVCR - works ok but is nothing pretty to look at. Scheduler also uses Windows task scheduler which is unreliable. Can be set up to use DIVX for recordings, etc. Functional, but not the best of the best.
SageTV - forget this program, didn't even recognize my TV Tuner Card.
Fly2000TV - Another program that I played with for several hours but couldn't get it to recognize my TV Tuner Card.
Hopefully this information will help some of you who are seeking other software solutions. If I've missed some compatible software packages, I'd be very grateful if others of you would add to this thread and provide detailed information as to your experiences.
Thanks
TVeith

Quote
Originally posted by tveith
Sorry for the late response.
1 - No, I did not need to do this workaround for MSIPVS. It worked fine when set to Canada. This is obvously due to the deal MSI arranged with Intervideo.
2 - No I never had to uninstall/reinstall to get it to work, it worked the first time I tried it.
Have you given Showshifter a try yet? It is the only program I've come across that has been 100% reliable with the MSI TV@nywhere card. Not to mention that it has a Show Guide capability. I should mention that I purchased the program last week and the support I've received has been outstanding.
TVeith
I tried Showshifter but I found on my system, it was not removing the interlacing, which was annoying. With my current uncertainty of whether or not the MSI card is working normal, I can't say that that problem is not unique to my setup.
The current state of my card is that, after all the jerking around I had to do to try to determine the cause of the MSIPVS freeze up, the card no longer allows itself to be setup. It no longer accepts country location, or cable signal source but always reverts back to Afghanistan and antenna. This prevents a cable scan from taking place and I am no longer able to tune any stations. I can therefore do no more testing to try to determine cause of the original program freezing problem. I don't believe that any tv tuner program using the Windows drivers will work with this card now. I would have concluded that finally the card has bit the dust except for the fact that I can use an alpha version of Dscaler to control the tuner and tune all the appropriate stations on my cable hookup. I am working with the developers to add sound support for this card to the program. The unique aspect of Dscaler is that it controls the card directly instead of using the Windows drivers. Unfortunately, or fortunately, depending on how you look at it, the next version (5) being developed will use the Windows drivers.

HT4061 I downloaded IOS7 on My Iphone5 and put in a 4 digit lock code for find my phone but My phone wont Accept it. It wont let me restore/backup.

I put in My IMEI code and ICLOUD tells me THAT THE product has been replaced. I am doing This to TRY TO ACTIVATE MY IPHONE5 AS it wont Accept My 4 digit code after downloading IOS7
So My phone in disabaled, wont let me backup,restore kos FIND MY PHONE IS TURNED ON! How Canon i turn it on if phone is disabaled and computer wont recognise phone kos its locked and if i reboot it it demands i enter code (how Can i, phone,computer wont Accept) TALK ABOUT BANGING MY HEAD AGAINST A WALL, ALL I WANT IS TO USE MY PHONE . APPLE INTRODUCE NEWS SUPER SYSTEM, BETTER THIS, BETTER THAT, HA. IVE SPENT ALL YESTERDAY AND STILL TRYING TO RESOLVE THIS, LET ALONE MAKE A SIMPLE PHONE CALL!
HELP ME SOMEONE PLEASE ,PLEASE

You can't restore a backup to a phone that is running a version of iOS earlier than the version running when the backup was made. Normaly this situation occurs when replacing a phone, and the eplacement OS is not up to date. The fix is to update the replacement phone, then restore from the backup.
You could try an older backup made with iOS6.
Anyway, why do you need all your info on it while the screen is being fixed?

MSI TV@nywhere MASTER PCI TV Tuner card FAQ

So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
INSTALLING THE HARDWARE
I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
CONNECTING YOUR TV SIGNAL
Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
INSTALLING THE DRIVER
Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
INSTALLING THE MSIPVS TV SOFTWARE
If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems. The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything?
Device
Video Input:
"Device" is always the Conexant Cx2388x Video Capture"
"Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
"Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
TV
Tuner:
"Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
"Country or Region" - if need to explain this one then maybe you shouldn't have this card!
Channel
Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
So at this point now, if all has gone well, you should be able to watch and record TV on your PC! If it hasn't...

"I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
"When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
"MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
Go to Start > Run (or press Windows key + R) and enter:
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation
"I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
"When I start up Windows I can hear a hissing like "static" / the radio is playing"
One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
"Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
"My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
"I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
"I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
"MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
"Where can I find these "Unofficial New Drivers" that people keep referring to here?"
The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
[Last edited 8th October 05 by Dr Stu]

Problem with DNS - ping/Safari cannot resolve, but host/dig work OK

Hi All,
Have a weird problem with DNS which is a bit similar to the following ones:
http://discussions.info.apple.com/thread.jspa?threadID=2190208
http://forums.macrumors.com/showthread.php?t=337942
I connect with remote internal network via OpenVPN and from time to time (yes, intermittent problem :)) internal DNS names cannot be resolved.
When it happens I can still resolve names using host or dig utilities, but applications (like Safari) and ping cannot resolve them.
resolv.conf has proper DNS server set:
*$ cat /etc/resolv.conf*
*# Mac OS X Notice*
*# This file is not used by the host name and address resolution*
*# or the DNS query routing mechanisms used by most processes on*
*# this Mac OS X system.*
*# This file is automatically generated.*
*domain openvpn*
*search openvpn*
*nameserver 10.0.0.1*
More than that - it can resolve those internal names when queried directly, for example using host:
*$ host YYY.XXX.ru 10.0.0.1*
*Using domain server:*
*Name: 10.0.0.1*
*Address: 10.0.0.1#53*
Aliases:
*YYY.XXX.ru has address 192.168.x.y*
but at the same time ping reports "*Unknown host*":
*$ ping YYY.XXX.ru*
*ping: cannot resolve YYY.XXX.ru: Unknown host*
I tried "*dscacheutil -flushcache*" and it did not help. Also tried to comment out domain and search directives in resolv.conf and it did not help as well (and actually it should not matter).
Any ideas why this can happen and what else can I check when it happens again?
Thanks!

I have the same issue. It cropped up after I installed updates to MS Office 2008 and Firefox in which I also saw issues with the icons disappearing in the dock of the applications that were open when I started the Office update. I rebooted to try to get them back, but ended up deleting them and restoring from the Applications folder. I don't know if that's a red herring or not, but I generally try to figure out what has recently changed that may cause something to suddenly start failing.
I'd been working successfully all morning before it started acting up. Switching from wifi to cat5 had no effect.
@realaaa, were you able to resolve without a major undertaking, like reinstalling your OS?
pnmbp:~ pn$ dig goo.gl
; <<>> DiG 9.6.0-APPLE-P2 <<>> goo.gl
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40996
;; flags: qr rd ra; QUERY: 1, ANSWER: 6, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;goo.gl. IN A
;; ANSWER SECTION:
goo.gl. 140 IN A 74.125.45.139
goo.gl. 140 IN A 74.125.45.102
goo.gl. 140 IN A 74.125.45.113
goo.gl. 140 IN A 74.125.45.138
goo.gl. 140 IN A 74.125.45.101
goo.gl. 140 IN A 74.125.45.100
;; Query time: 27 msec
;; SERVER: 192.168.2.1#53(192.168.2.1)
;; WHEN: Mon Dec 13 16:59:34 2010
;; MSG SIZE rcvd: 120
pnmbp:~ pn$ ping goo.gl
ping: cannot resolve goo.gl: Unknown host
pnmbp:~ pn$ curl <a class="jive-link-external-small" href="http://">http://goo.gl
curl: (6) Couldn't resolve host 'goo.gl'
pnmbp:~ pn$ host goo.gl
goo.gl has address 74.125.45.100
goo.gl has address 74.125.45.101
goo.gl has address 74.125.45.138
goo.gl has address 74.125.45.113
goo.gl has address 74.125.45.102
goo.gl has address 74.125.45.139
pnmbp:~ pn$

Digi@nywhere A/D

Similar Messages

Maybe you are looking for