Digigami MegaPEG.X Pro, anybody used it?

I'm interested in a very good MPEG 2 conversion, anybody used Digigami MegaPEG.X Pro? I know its compatible with FCP, but no more...
Thanks

I think I will go for BITVICE or look for a facility with dedicated hardware
(if price is affordable), compressor is ok, but spending so much time editing
and color correcting etc (even if its plain DV and for hobby) I want a better result in terms of quality
Thanks again
iMac g5 1,8 Mac OS X (10.3.7)

Similar Messages

Is anybody using RDX Removable Disk Backup System

I´m sorry, this a new post about an old discussion but I would like to start a fresh dialogue for today; 2011.
Is anybody using RDX Removable Disk Backup System (with or without T.Machine).
An affordable alternative to LTO tape? Proved compatibility with Mac OS?
Is it possible to insert a RDX drive as a second optic unit inside a Mac Pro?
Any happy RDX+mac user, so far?
Thanks.

I'm not using RDX on a Mac, but I do have one client I'm using RDX for a Windows server. While RDX is somewhat cost effective over LTO/Ultrium, IMHO it probably wouldnt' be the best for Time Machine. Time Machine expects the previous backup to be online and if you switch cartridges, TM would have to create a new backup from scratch. Then if you switch back the cartridges, your TM bundles are out of sync. I'm not saying it's not possible, but that this is not the "normal" way TM works. So you need to understand what you need to do if you were planning to switch cartridges. (If you weren't planning to switch cartridges, then a "normal" external or internal hard drive is more cost effective than RDX.)
RDX cartridges are basically 2.5" SATA hard drives. The RDX "drive" is, for the most part, just a SATA to USB converter. (Or SATA to eSATA or whatever interface you get.) On the PC the advantage is that you don't have to "safely remove hardware" and you don't lose the drive letter. On the Mac, a "normal" external hard drive is almost as convinient as RDX, since there's no drive letter to worry about. The RDX's advantage on the Mac would be not having to plug/unplug a USB cable on the external units. I suppose you could get an internal eSATA RDX to put into a Mac. I don't know of anyone doing that.
I did use my client's USB RDX drive on his Macbook, just to see what we could do with it. While it worked, we didn't do extensive testing so I can't comment on long term satisfaction with OSX. But so far it's been reliable with Windows for almost two years. (Windows Server 2008 with Backup Exec 2010.) However since RDX is basically just a hard drive, I've gotten the client to realize that in a year or two, we'll probably have to start replacing cartridges, assuming his data size doesn't grow beyond the RDX capacity. This is based on the assumption that the RDX cartridges would have similar longevity to laptop hard drives, which have 3-5 year warranties. We probably will get more lifespan than that, but better to have the client plan in the budget now, rather than have backups fail.

Anybody using their intel i-mac for professional use?

Is anybody using Intel i-Mac for professional use? (Music or video production?). I went to the Apple store here and checked the Powermac G5 2.0, Intel i-Mac and a Macbook pro. They all seem equally fast. (I tried loading songs in Garageband, opening multiple apps, switching between them, loading samples etc). What's your experience?

Have been using PhotoShop and InDesign and have found "saving" to be a problems sometimes when you have made a number of changes. The spinning ball keeps spinning. Suggest that anyone using it (Rosetta) save more frequently as I've had to Force Quit on some documents more frequently with loss of work.

Core Audio Format -- Is anybody using it?

CAF files are a new(ish) Audio File Format/Wrapper type. Apple made it.
Qs
Is anybody using it with Logic? -- They do import
How? Why? -- They have several advantages but are relatively new, and it is not acknowlodged in Logic's documentation AFAIK.
Soooo...... There are other apps that support this Format, many including Logic will just plop them in as AIFF, for example. The format actually supports many audio file formats.
So within a CAF there can be audio of several types, sample rates, resolutions... They even support multichannel, markers, regions, music chunks.
In practice this could be a very useful format. Logic doesn't support all of it's features/formats but could be extended through QT or could hold limitations, probably why it is not listed as a supported format.
So is anybody taking advantage of this stuff, or hitting walls, having problems using these with Logic Pro?
Just Curious.
J

I have. I mentioned it imports -- prolly just certain cases where the underlying format is Logic approved. Haven't really worked with it much yet though with Logic as it was never cited that it was supported AFAIR. So I am guessing that it's underlying format needs to be a Logic approved one, but it imports 16, 24 and rejects 8 and 32. It also creates independent waveform overview files. I compared a 16 CAF to 16 AIFF, there were 3-6 lines which are different. Of course the header was in that list every time.
I was asking if there was anybody else using it so.... shrugs. It imports but I don't know of any advantage to use it, at the moment.
Maybe this will be the de facto 32/64 mixed file format when we get a new arrange window with sample resolution : ^)
Cheers, J
Gr8-1. ja, right -- is that a fat joke?

Has anybody used jsmooth tool to convert .jar to .exe?help needed

Hello,
has anybody used jsmooth tool to convert .jar to .exe if so please let me how to do because i couldnt do using the user manual since its not clear pls if any one uses it please let me know the procedure to do its really urgent plsssss

Prabhav (guest) wrote:
: We were looking for a tool from which we could directly embed
: PL/SQL codes to our pre built HTML pages. When I came across
: WebAlchemy, developed by the Aussie pro, I thought that was
the
: thing I wanted. I am using the beta version 2.1 of WebAlchemy
: but I am having problems converting my pl/sql embedded Html
file
: into web PL/SQL cartridge as the Alchemy cannot convert few
: attributes properly.
: Has any body used it and have solution? Is there any other
: product like this on the web or market? Pleaes advice, only
: thing I want is to let my HTML be able to listen to Pl/sql
: procedure and generate dynamic contents without use of CGI and
: JavaScript.
: Please suggest anything u can.
Hi,
I have also used Web Alchemy, but have never come across a
production version (I tried also). It's a shame it was never
completed, as it only seems to support HTML v2.
Regards
Toby.
null

HELP! Can Adobe Premier Pro be used over Citrix?

Can Adobe Premier Pro be used over Citrix? IS it possible? Has anybody tested it?
Thanks in advance,
Bryan

> BUT there was no audio
Did you set your connection options for "Remote computer sound" to "Bring to this computer" ?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

HT201343 Can I upgrade my mid 2010 macbook pro to use airplay?

Can I upgrade my mid 2010 macbook pro to use airplay?

Unfortunately, no you can't.
Just to be clear. Your computer will support AirPlay it's just AirPlay Mirroring that requires newer hardware.
Matt

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them to upload to youtube but it won't let me import them.

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
please if anyone has any ideas that can help me please let me know XD thanks.

First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds.

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

How can i force my mac book pro to use an external display

how can i force my mac book pro to use an external display
my screen is black

What sort of adapter are you using?
Clinton

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder ..that doesn't have firewire out/input?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Digigami MegaPEG.X Pro, anybody used it?

Similar Messages

Maybe you are looking for