Digital audio via USB no longer works since IOS8

Hi,
I use the "Lightning to USB Camera Adapter" (ref MD821ZM) to connect my iPhone or the iPad to my Bowers and Wilkins speakers MM-1 USB cable.
This allowed to use the B&W internal DAC.
It has worked fine in IOS 7 and it was a fantastic feature and easy to use.
IOS no longer streams the music digitally to the DAC. it just keeps playing the music from the iPhone/ipad internal speakers.
I truly hope this is only a bug and not a feature Apple has voluntarely decided to remove, which would be a shame because it doesn't harm anyone to keep it.
or anyone has a suggestion (app or something)
thanks,
BigMat

b,
We are in business. I charged the iPod via the cigarette lighter (didn't take long). When I plugged it into the computer after charging it I got the familiar ding-dong sound and the iPod updater immediately prompted me to update the software on the iPod (which I did).
After updating, the computer no longer seemed to recognize it. I stopped all the USB devices that were running, one at a time until I finally saw Apple iPod in the list and I stopped that as well and disconnected.
To make a long story short, after rebooting my computer and reconnecting the iPod, iTunes came up as normal and it looks like I'm over this hurdle.
I have no idea why the computer wouldn't recognize the iPod when the battery was dead but suddenly recognizes it after charging it.
My wife says that the iPod had been left plugged into the computer for a long period of time but I'm not sure what that would have done.
At any rate, we're working now and hopefully someone will get some benefit from this thread.
Thanks again,
Greg.

Similar Messages

Can MacBook Pro output digital audio via usb?

I'd like to output digital audio via usb. Can it be done from iTunes? This would allow me to go directly to my dac and then to my preamp.
Thanks.

Russell, there are quite a variety of devices that accept digital audio over USB from any mac with a USB port - see http://www.trendsaudio.com/EN/Product/USBAudiodesc.htm for one example.
Try a google on MAC USB Audio OUTPUT any you should pop up some useful options.
Cheers
Rod
Message was edited by: Rod Hagen

M-audio omnistudio usb no longer works after upgrade to mountain lion

hello. has anyone encountered this problem. after upgrading my intel imac to 10.8, i have discovered that my m-audio omnistudio usb is no longer recognized. i have changed the usb cable and reinstalled the last current driver for the hardware, but still nothing. would like to get it running again as that is what my studio monitors are running thru. i can't play my piano(m-audio studio 88) anymore. any suggestions would be greatly appreciated, thanks.

It appears that ML no longer supports 32bit applications at all.
Therefore, you have 2 options:
1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server. You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface. I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
2) Move over to the Cisco AnyConnect VPN client, which does support 64bit. This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself. I went to this method yesterday and it's worked out great so far.

My mobile hotspot no longer works since I upgraded to mountain lion. What happened and how do I get it back?

My mobile hotspot (Samsung Note II) no longer works since I upgraded to mountain lion (running on MacBook Pro) What happened and how do I get it back? "
Keep getting error message:
"Could not join “NAME-HOTSPOT”.
A connection timeout occurred"
Please someone help me with this - I do a lot of travelling and use my hotspot!
Thanks

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wrieless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Airport express & digital audio through usb

Can airport express stream digital audio through usb to use with a usb DAC?

No. Digital optical audio is only available via the AirPort Express' audio port only.

Audio via USB displays input level but no sound is heard.

I have a Roland System 1 synth that features audio via USB. I have installed the drivers, and the System 1 is showing up in my menu for system preferences/sound. When I select the System 1 as my input device, play the keys, and adjust the synths volume knob, the input level meter responds accordingly, showing that the Mac is hearing the output of the synth. However, I can not get the sound to come out of the speakers! The Mac's internal speakers are set as my output device, and they are turned up and working fine with all other audio.

I have MIDI working fine in my DAW.
I just can't get any audio to play through USB, which is a feature of the System 1.
System 1 is set as my input device (driver has been installed) within system preferences/sound, I play the keys, and adjust the synths volume knob, the input level meter responds accordingly in the preferences window, showing that the Mac is hearing the output of the synth. No sound is heard.
All other Audio/system sounds/itunes/etc. can be heard.

Syncing with iPad mini does no longer work since latest update of iTunes

Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

Hyperlinks from Outlook are no longer working since updating to 8.

Hyperlinks from Outlook are no longer working since updating to 8.
I get a pop-up with "URL" An error occurred in sending the command to the application.

Well, I've had to downgrade to Firefox 4.0 in order to get hyperlinking back.

Plants v zombies no longer works since I upgrade to 10.8.2

Plants v zombies no longer works since I upgrade to 10.8.2. I was wondering if anyone else has had this problem.

Hello:
That sounds like a game. I suggest you contact the game developer.
Barry

TS1591 my ipod touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM

touch no longer works since ios 6 update!!!!!!!!!!!!! FIX THIS PROBLEM

Did you fail transfer all purchases to your computer before attmeoting to update? not good. ''You can redownload some itunes purchases in some contries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will need to restore. If you are unable then read this:
iOS: Unable to update or restore

IBooks no longer works since update. Keeps saying retry. Half way through reading a book that cost me $10 . Please fix this problem!!

Ibook app no longer works since trying to download the latest update. Just bought a book on Cancer treatments for $10 now l can't finish reading it. What happens now??

Hi, Piafromvic. This forum is about using apple's new iBooks Author software to create books. There's a separate forum for help with the ibooks app for reading books and you might get more answers there:
https://discussions.apple.com/community/app_store/ibooks
Good luck!

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling and the 'Continue' button at the SLA is greyed out. Any ideas? Cheers 'n thanks for any feedback.

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling the software and the 'Continue' button at the SLA page is greyed out. Any ideas?
Cheers 'n thanks for any feedback.

Went around the long way and reinstalled Mavericks since the Mac was acting a little flakey occasionally of late, and now the printer as once again been installed and works ok by wire. Have not yet had time to try to connect wirelessy yet, so...
Cheers!

HT201365 The keyboard on my phone no long works since ios7 update, I switched phone off to reset why

Keyboard on my phone no longer works since ios7 update. Advice please

Can you be more specific? Not in any application? Like writing an email, entering an address into Safari, sending a text message ...
If you touch a certain spot in those apps, the keyboard should slide up from the bottom.
If still not, what about restarting the phone? Does that help?

Why does Apple iPad Camera Connection Kit no longer work with iOS8

Why does Apple iPad Camera Connection Kit no longer work with iOS8?

The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

Recognizing digital camera via USB

I recently recently reinstalled 10.3 on my iBook using the 'Archive' option. Since reinstallation, my iBook will not recognize my digital camera that is connected via USB.
I have verified permissions and zapped pram. The USB ports work fine with my printer.
Any idea how to proceed to get the camera recognized?
Thanks for any help - direction.

I understand your frustration.
Does Apple System Profiler see anything connected to your USB port? With the camera connected and turned on, click "About This Mac" at the top of the Apple menu, then click "More Info" in the window that follows, and "USB" in the ASP window. When you click on each of your two USB ports in the upper right portion of the ASP window, what is shown below for connected devices? If there's nothing there, some sort of hardware problem would seem to be indicated — and the fact that your ports work with other devices suggests that if there's a hardware problem, it's in the camera or its USB cable. The fact that both were working before you reinstalled the OS doesn't absolutely guarantee that both are still working, though the temporal coincidence of a failure in one of them with your OS reinstallation does strain credulity a little.
...the camera was recognized by my computer before I reinstalled the OS.
That's why I initially surmised that the current failure to do so might be due to software (a driver or extension) that was deactivated when you archived your old OS. But it could instead be because of some software setting or preference that was selected before the reinstallation, archived with the old OS, and now needs to be selected again. Unfortunately, I can't think what it might be. I hope someone else will come along with a bright idea for you.

Digital audio via USB no longer works since IOS8

Similar Messages

Maybe you are looking for