Digital Blow in and Multi Orientation Folios

Hi there,
stoked to be using the reading api and digital blow in features discussed here.
we're using it in this app, and it appears we've discovered a bug, whereby if you produce a multi-orientation folio, then the web-overlay only works on the portrait orientation, not the landscape?
Are you able to confirm if this is a bug or not?  If so need to know of a workaround we can apply for this, and a timeframe for when this can be fixed?
thanks, love your work.
Conor.

So I did that, expecting a timely response. it's been a week and Adobe boast of one hour for response time. Very frustrated to essentially be a beta tester for Adobe's new features and software and not getting anywhere. For the record, we publish magazines that are featured on newsstand - not that makes any difference, but it's pretty furstrating to have to follow this up... it needs to be documented.

Similar Messages

  • Multi-folio app with both portrait and landscape orientation

    Can we create a multi-folio app that contains both portrait and landscape orientation folios?

    A multi-folio app can have any mix of portrait, landscape, or dual-orientation folios in it. The only requirement is that for a specific folio all articles in it share the same orientation setting.
    Neil

  • Distinguish mono-folio and multi-folio PDF on Windows Explorer

    Hi everyone,
    is there a way to distinguish mono-folio and multi-folio PDF files on Windows' Explorer ? I mean without opening them, simply when you look at the thumbnail ?
    Thanks.

    In that case, no. The icon for a PDF file is always the same, and the page count is not one of the properties displayed in the hover menus in Explorer.

  • Multi-rendition folios and 108ppi resolution

    Experimentation with multi-rendition PDF folios is throwing out some interesting things. I am in a sharing mood.
    - A standard iPad 2 folio rendition resamples images to 72ppi. An iPad 3 folio rendition resamples image to 144ppi. A multi-rendition folio resamples images to 108ppi. As a result, images in a multi-rendition folio look worse on an iPad 3 than those in an iPad 3-specific folio. Sure, if the original images are not very good, readers won't notice any difference, but for top-quality photography, the jaggies and jpegging noise are noticeably harsher.
    - All raster MSOs in a multi-rendition folio will be resampled to 108ppi. If those MSOs contain text, that text will appear fuzzy/jaggy on an iPad 3 even without zooming in. MSOs must therefore be set to Vector format to preserve the text... but remember that any text incorporated into a raster graphic will still be resampled to 108ppi, then fuzzed up onthe fly to 144ppi on the iPad 3 screen. So if someone is supplying you with logotypes, for example, insist on vector illustration files.
    Clearly, the 108ppi resolution of multi-rendition PDF folios is a compromise. I'd be a little happier with this resolution compromise if it was possible to adjust JPEG compression settings for the images.
    Ali

    Hi Bob
    I've just created a large report and did what you suggested, duplicate the image, and turn it into an mso and then added the HD folder. Nothing looked different, so I tested on of the images in the HD folder by adding the word HD, tested on iPad 3 and it didnt pick it up. I've made sure the file names are exactly the same. The files are tiff's.
    Have I missed something? all my SD assets are in a Links folder, with all the other assets, and then I created the folder "HD" with the hi-res images in there, and thats it. The 1024x768 folio is linked to all the normal images, but retina version is not picking up the images from HD folder
    Anything obvious missing? oh and I'm on release 23
    Cheers
    Alistair

  • How do you share and view multi article folios on any desktop computer without DPS?

    How can one view a multi article folio on a desktop computer, mac or pc, using the Adobe Content Viewer?
    I need this for desktop sharing purposes, for people without DPS of any other Adobe software installed (except for probably Content Viewer).
    It`s an interactive brochure that needs to be spread among a number of people. Some use mobile devices, but others use Desktop computers.
    Thank you.

    DPS is essentially a mobile publishing platform.
    The only desktop ACV that is available is for Windows 8.1. Otherwise these
    folks need tablets.

  • Digital Blow-in metrics, what's available?

    I was trying to dig up some documentation on this, and couldn't find any.
    Are there any analytics metrics recorded/used for digital blow-in purposes, or are we left with just entering our own tracking into the html?
    Cheers

    The digital blow-in not tracked. You are right, you can enter your own tracking in html.

  • Digital Connections, SPDIF and Dolby Digital Info

    I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
    Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
    Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
    ) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
    2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
    3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
    PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
    Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
    N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
    More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
    Dolby Surround info: http://www.dolby.com
    I hope that clarifies the issue .
    Message Edited by KokChoy-CL on 07-04-2008 :0 AM

    Digital Connections, SPDIF and Dolby Digital (german revision)
    Options
    03-08-2007 01:52 AM
    Digital Connections, SPDIF and Dolby Digital Info
    Übersetzung + Erweiterungen + Revision 03-08-07
    Der Digitale Anschluß
    Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
    Digitale Anschlüsse – S-PDIF & Toslink
    Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
    Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
    Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
    !! Update !!
    Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
    ( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
    In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
    Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
    Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
    Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
    Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
    !! Der einfache Weg !!
    Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
    - Glasfaser als Trägermaterial
    ( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
    aufwendige Wege
    Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
    (Massetrennung )
    + die elektrische Verbindung der Schirmung wird umgangen
    - aber Leistungs- & und Klangverlust(geringere Dynamik)
    - Verwendung von ( hochwertigen ) symmetrischen Verbindungen
    ( „PLUS“ „MINUS“ „Masse“)
    + Trennung der Schirmung an einer „Seite“ des Kabels möglich
    [bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
    anschließend dieses Kabel wertlos ist ]
    - sehr große Anschlüsse
    - Profibereich
    - Einsatz einer zentralen Spannungsversorgung für alle miteinander
    verbundenen Geräte
    Nachtrag
    Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
    - End - !! Update !!
    Einige Vorbetrachtungen
    Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
    Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
    Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
    Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
    Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
    Drei Varianten der Decodierung sind möglich.
    (1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
    Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
    Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
    In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
    Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
    Bitte merken:
    Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
    (2) - AC3 / DTS mit der Soundkarte decodieren
    Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
    In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
    Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
    ( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
    - die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
    - wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    [ mehr unten ]
    (3) - AC3 / DTS mit einer Software decodieren
    Wenn deine Soundkarte kein DolbyDigital unterstützt
    ( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
    (Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
    Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
    Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
    Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
    ( "SPDIF Pass-through" ) ausgeschaltet ist.
    Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
    Wiedergabeformate möglich.
    In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
    PC Spiele
    PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
    ( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
    Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
    !!! Notiz !!!
    X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
    Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
    Flexi-Jack - DigitalDIN
    Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
    3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
    für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
    - Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
    - Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    - Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    Das digitale E/A-Modul ( Digital I/O – Modul )
    Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
    Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
    Achtung !!
    ( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
    zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
    Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
    Front Panel-Sockel (für Geräte der SB073X-Serie)
    2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
    Anschlusskompatibilität
    Ausschließlich Intel HD Front Panel Audio-Standard
    Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
    Einschränkungen
    Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
    Sound Blaster X-Fi E/A-Konsole
    Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
    So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
    -eof-

  • Multi-rendition Folios

    Do multi-rendition folios work in Creative Cloud versions of DPS?

    They were specifically created for the Single Edition use case. They are only valuable if you are using pan and zoom overlays in your publication. If you aren't there's no point to them, just use a 1024x768 folio in PDF format.
    Neil

  • Memory leaks and multi threading issues in managed client.

    In our company we use a lot of Oracle, and after the release of the managed provider we migrated all applications to it. First the  things were very impressive : the new client was faster, but after some days applications that uses 100MB with old client goes to 1GB and up. The memory is not the only issue, we use a lot of multi threading, and we experience connection drops and not disposal, after 1 days working one of the application had over 100 sessions on the server. I think there is something wrong with connection pool and multi threading.
    Is someone experience same problems.
    Yesterday we went back with unmanaged provider. Now things are back to normal.

    connection drops: did you try to use "Validate Connection=true" parameter in your connection string?
    the new client was faster: are you sure with this statement? Even in 64bit environment? I got quite serious performance problems when running application under 64bit process: https://forums.oracle.com/thread/2595323

  • HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
    If your new TV has a conventional VGA in and stereo inputs you can try this connector.
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
    I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
    It won't be high resolution, but it will get you picture from iPad to TV.
    Good Luck.

  • I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

    I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera.  how do I get my PC to reconize that it is an iPad

    Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it. 
    This is what is happening to me.  the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC.  PC will not go anyfurther than a warning screen and I have to then shut it down  unplug the iPad and start again.  HELP please

  • A single report can't combine portrait and landscape oriented pages

    Post Author: joelo2
    CA Forum: Crystal Reports
    Hi,
    Can a single report in Crystal report XI (version 11.5.8.826) combine portriat and landscape oriented pages like Crystal report 2008?   For example, I have one main report with several subreports in the main report.  I want one subreport be in portrait page orientation and the other subreports in landscape.  Can I do something like that in Crystal report XI version?    I even tried writing a small .net program to do this, but it doesn't seem to allow me to do that programmatically either.  Please help

    Post Author: ngra
    CA Forum: Crystal Reports
    I'd like to elevate this issue with Crystal Reports XI. There is a critical application which we developed in-house which needs both portrait and landscape orientation in each of the 30,000 plus documents we are sending out every month.If developers in Business Objects are picking this thread up - we need a patch for this limitation - quick. Right now, we are toying with the possibility of exporting the documents into a text format with markers indicating if a page is portrait or landscape. This is to be loaded into a Xerox machine (which costs hundreds of thousands of dollars), where it is mapped automatically to portrait or landscape. Note to Business Objects: This will provide us and countless others with much value. Think 80/20 rule - most bang for your development bucks and value for your customers!

  • Keyboard and Multi-Touch trackpad may become unresponsive on MacBook Pro (Retina, 15-inch, Late 2013)

    Folks,
    I have exacly same sympton described here on my 5 day old 15 inc macbook pro.
    http://support.apple.com/kb/TS5296
    MacBook Pro (Retina, 13-inch, Late 2013): Keyboard and Multi-Touch trackpad may become unresponsive
    Has anone tried to apply this patch on 15 inc ?
    Kind Regards,
    Neroshige

    The patch is only for MBP late 2013 13 inch. 15 inch is not able to install this patch
    I'm facing this problem intermittently.
    When my keyboard & trackpad went unresponsive, I plug in my USB keyboard and the keyboard & trackpad went back normal.
    I search the web and somebody highlight it may due to connector to keyboard/trackpad appear to be curled.
    Not sure is hardware problem or software bug...

  • Do I need Adobe Digital Editions 2 and 3. on my computer?

    Recently I was going through 'Programs and Features' and realized I had Adobe Digital Editions 2 and 3 installed. Are both needed. I am running Vista on Windows 7 (64 bit).
    I have medical memory problems and am finding Chrome to be challenging.
    I also wonder if this could be related to the problem I am having with not being able to open Adobe Reader. I have the JavaScript all figured out and am trying everything I can think of to open Adobe Reader. I am open to any suggestions.
    Because of my problems all replys need to be in English (not in computer jargon) and in a 1, 2, 3 sequence. Sorry to be troublesome but thats me.
    Thanks to all who want to give it a try.

    I had the same issue.  I uninstalled version 2 and my program ran fine.  Well, it still has the same problem I had with version 2, which is why I'm in the forums right now, but you don't need both versions.  I don't know if having both will cause issues or not (some extensions and apps have this issue) from what I saw, downloading version 3 did not update version 2.  You just got another ADE program that was a bit newer.
    However, I'm not an expert.  This is just what I experienced by uninstalling it.  I highly doubt you'd have a problem.  And if you do have some weird issue from it?  Uninstall all ADE programs from your computer, and then reinstall the most current version available.  Should fix you right up.  Good luck!
    Lovies,
    Selenity Jade
    Coffee Addict & Insomniac

  • Am unable to download itones app for my windows pc that site says like "Now that you've downloaded iTunes, you're just a few steps away from starting a digital entertainment collection and enjoying it on your Mac, PC, iPad, iPhone or iPod." but i couldn,t

    Dear Apple,
    I am unable to download itones app for my windows pc that site says like "Now that you’ve downloaded iTunes, you’re just a few steps away from starting a digital entertainment collection and enjoying it on your Mac, PC, iPad, iPhone or iPod." but i couldn,t find in system.
    please send the itones downloads link.
    Thanks
    suresh

    Hi Suresh,
    Thank you for your reply.
    Devices should appear in the top right of iTunes, as seen in this image:
    From:
    iTunes 11 for Windows: Connect a device
    http://support.apple.com/kb/PH12449
    If you do not see your iOS device in this menu when you connect it to your computer, it may not be recognized by iTunes. In this case, I recommend the troubleshooting steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best,
    Jeremy

Maybe you are looking for