Digital Camera RAW 3.11 is out

Digital Camera RAW Compatibility Update 3.11
This update adds RAW image compatibility for the following camera to Aperture 3 and iPhoto '11:
• Nikon D800
For more information on supported RAW formats, seehttp://support.apple.com/kb/HT4757.

Good afternoon everyone! I desperate need a help from someone who can send me or show me where I can download the "Digital Camera RAW Compatibility Update 3.11" ... need the "drive" for the Nikon D800 ... already downloaded the Digital Camera RAW Compatibility Update 3.12 but it did not work, then i did the OS upgrade to 10.8.2 but it did not work, then i upgraded the apperture to 3.4.1 but....it did not work. I deleted "RawCamera.bundle" and installed the update again "3.12", "3.10", "3.13" but I can not make with the apperture read files from Nikon D800.
My last hope is to get the file Digital Camera RAW Compatibility Update 3.11 ... unfortunately he is no longer available for download on apple website (i think)... maybe someone has an address where I can download it or send me it by email ?!
[email protected]
Thanks to everyone whoever can help me!
A hug - André ('m writing with the "ID" of my wife).

Similar Messages

Aperture Expert is reporting that Digital Camera RAW 4.0.5 supporting Fuji sensors is out...

It should be available via Software Update.
http://www.apertureexpert.com/tips/2013/4/17/digital-camera-raw-update-405-for-a perture-and-iphoto-fujifi.html
New cameras supported:
Fujifilm X20
Fujifilm X100S
Fujifilm X-E1
Fujifilm X-Pro1
I would expect it would also be available for download here:
http://support.apple.com/downloads/
But isn't there yet. I guess there may be numerous fewer threads here related to Fuji now ;-)

The Mountain Lion raw support article also lists the update already - I had to remember to clear the Browser Cache to see it
http://support.apple.com/kb/HT5371
And it was available at the AppStore for download more than an hour ago, but grouped with the pre-release software update, even if the update itself was not marked as pre-release seed.

Digital Camera Raw update 4.02

is out in software update. I don;t see it on the Apple site yet however.
This from software update

Discovered that the problem exists only with E-PM2 RAW files imported into Aperture before applying Digital Camera Raw Update 4.02. (I had been shooting RAW+JPEG since getting the camera, while waiting for RAW support.
Found a solution:
Select all the problem files. Choose "Reprocess Originals" from the Photos menu. Done.

Now available: Digital Camera RAW Compatibility 4.0.6

http://support.apple.com/kb/DL1656
Digital Camera RAW Compatibility Update 4.06
This update adds RAW image compatibility for the following cameras to Aperture 3 and iPhoto '11:
          Canon EOS-1D C
          Canon EOS Rebel SL1 / 100D / Kiss X7
          Canon EOS Rebel T5i / 700D / Kiss X7i
          Hasselblad Lunar
          Nikon COOLPIX A
          Nikon D7100
          Nikon 1 J3
          Nikon 1 S1
          Sony Alpha NEX-3N

Nah. There will be a new camera announced in the next week and it will again be a crisis that Apple is not professional because they take more than 4 days to support a new camera
What about a camera released a year ago? Should I get at least a bit upset fo the lack of support? Hope wit will come out soon.
Raf

Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

Unable to update to Digital Camera RAW Compatibility Update 5.03

This is probably an Apple Update issue, but is anyone else experieincing a greyed out Update button. I restarted and the update button was available again. Initieated download, but got no message about installing our any success in updating it, so for now it remains in my update available pane for several days. Real pain! Any ideas on how to force or troubleshoot this update issue? Running Mavericks 10.9.1

What is your Aperture version? Is it compatible with the latest raw support? At least Aperture 9.4.5
Any ideas on how to force or troubleshoot this update issue?
Have you checked, if the update has actually been installed? You can see in the "About" panel the version of raw support that Aperture is using.
If the raw support has not been installed, try to download it from the Support page:
Digital Camera RAW Compatibility Update 5.03 http://support.apple.com/kb/DL1717
Sometimes you can recover unfinished downloads by using the menu item "Store > Check for unfinished downloads" in the App Store menu.

Digital Camera RAW Compatibility Update 2.2 - White Balance Temperature

Prior to downloading the Digital Camera RAW Compatibility Update 2.2 I was importing RAW photos without a problem. Now all my photos are imported with a temperature of 2500K. I have a second computer on which this update hasn't been loaded and photos load with the proper temperature setting. When I load photos in Photoshop the temperature is indicated correctly. My DSLR is a fairly old Canon D60. Any suggestions?

Mark:
Welcome to the Apple Discussions. You can downgrade to 2.1 as described in this post:
Source:http://discussions.apple.com/message.jspa?messageID=8142169#8142169
Page Title: Apple - Support - Discussions - Can't import Canon RAW's (400D) to ...
Date: Wednesday, September 24, 2008 7:26:47 PM
This might work (from Clem who figured it out):
Delete the file: System/Library/CoreServices/RawCamera.bundle then (re)install the previous version.
Get the previous version here:
http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
Restart your computer.
Althought the fix was for correcting the problem of not being able to import at all it does give a means of downgrading to 2.1.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Digital Camera Raw Compatibility update installation issues.

I have attempted to install the Digital Camera Raw Compatibility update 6.01 but I am being asked over and over to restart my Mac Pro. The app store shows that I still need to install the update.

I was surprised to see it listed.
I don't have a shiny new Leica . Will have to make do with my shiny new RX1R .
(Added:)
I don't follow Medium-Format equipment, but a quick check tells me the Pentax 645D came out in 2010.
Message was edited by: Kirby Krieger

HT201070 Software update - Digital Camera RAW compatability update 4.04

I have an Imac and about 6 months ago the "Updates" tab in "Applications" reflected the following update "Digital Camera RAW compatability update 4.04" When I tried to update this in applications it has for 6 months given me a time out error. I cannot remove it from the updates tab in applications and it is blocking other updates, how can I resolve this?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Apple Digital Camera RAW Support 2.2. update

After todays Apple Security Update 2008-007 the Apple Digital Camera RAW Support 2.2. update finally works correctly and the data can be aquired via card reader.
Message was edited by: jdonath

Lucky you jdonath....
I have still have the problem that have been mentioned in a number of posts in the forum, and what I guess you are refering to. And I have tried the advices I have found in those posts. I must admit that I might not have found them all.
The CF card on my Nikon D2Xs shows in finder, .nef files are there, but Aperture 2.1.1 don´t recognize my files only the card itself.
I use a card reader-not transferring files directly from the camera. I have installed the latest security update and camera raw 2.2. I have tried to go back to version 2.1 of the raw converter with no luck. I have repaired permissions, both with Onyx and with the disk tool in OSX.
Aperture opens when I put the CF card in the reader and it shows in the import option/drives window in Aperture, but the files are somewhere in outer space or at least hidden and unavailable for import.
So for now my solution is to dump the files to a picture dump folder on my hard-drive and import them from there to one of the libraries I use.
I have different libraries for work and private files in case someone wondered
It does not make any difference which library I use the problem is persistent. This feels like unnecessary work and not a very satisfying sollution in my workflow.
Yeah, yeah i use both belt and suspenders so the files are kept safe on an external drive as well. Manually copied of course... and btw i use a combo of referenced and managed files, but that should not make any difference. I have tried to alter that in the import options, with no apparent result of course.
Can anyone give me a hint what could (still) be wrong or do I have to be moderately patient and wait till next sunrise (it is late autumn and dark in Norway this time of year) , when Apple sends out version 2.3 and make a prayer that they remember that some photographers are still back in the stone age when comes to cameraequipment... ( I wish someone gave me a D3)
And just to make the confusion complete... It used to work BEFORE the security update last night...
Cheers and my 2 cents
Ø

Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

Hi
I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
Hmmm
Checking iPhoto ...
About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
Unfortunately this is only an update.
So I need to install first a newer Iphoto version.
Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
Lost!
How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
Any help welcome
Thx
Wolfgang

I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them. Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
The error:
Installer quit unexpectedly.
Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
Backtrace not available
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000055 ebx: 0x00000000 ecx: 0x00000000 edx: 0x00000000
edi: 0x00000000 esi: 0x00000000 ebp: 0x00000000 esp: 0x00000000
ss: 0x0000001f efl: 0x00010203 eip: 0x8fe01030 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000000
cr2: 0xfffffffc
Binary images description not available...
This laptop cannot be upgraded further without hindering its performance. Hence, I need to keep the version of iPhoto that I currently have.
Thank you for your response.

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Digital Camera Raw Update

TUAW reports there's a new update to support more digital cameras. I didn't see a thread here, so I thought I'd share in case some of you were waiting for support.
Apple has released Digital Camera Raw Compatibility Update 3.1 via Software Update. The update can also be downloaded here. The 6.77 MB (web) or 7.2 MB (Software Update) update requires Mac OS X 10.5.8 or 10.6.2, and extends RAW image compatibility for Aperture 3 and iPhoto '09 for the following cameras:
o. Hasselblad H3DII-50
o. Leica M9
o. Leica X1
o. Olympus E-P1
o. Olympus E-P2
o. Panasonic Lumix DMC-GF1
o. Pentax K-7
o. Pentax K-x
o. Sony Alpha DSLR-A500
o. Sony Alpha DSLR-A550
o. Sony Alpha DSLR-A850

I am running Aperture 2, and iPhoto 09, with a Pentax Kx.
Either the 3.1 update, or the ProKit upgrade, killed reading of my DNG files in Aperture.
Although Software Update shows them as recommended for iPhoto 9 and Aperture users, I would suggest passing on them if you are still in Aperture 2.

Digital Camera RAW Compatibility Update 4.01 for Aperture 3 and iPhoto '11

Check Software Update!
Canon EOS M
Canon PowerShot S110
Nikon D600
Sony Cyber-shot DSC-RX100
Canon PowerShot G15
Canon PowerShot SX50 HS
Nikon 1 J2
Panasonic LUMIX DMC-FZ200
Panasonic LUMIX DMC-G5
Panasonic LUMIX DMC-LX7
Sony Alpha NEX-F3
Those of you who have already imported "unsupported" photos into Aperture (i.e. Nikon D600) photos, simply choose Photos->Reprocess Original after installing this update (and restarting Aperture), and the photo will then show up.
Aperture Expert has a little summary too:
http://www.apertureexpert.com/tips/2012/10/24/digital-camera-raw-compatibility-u pdate-401-for-aperture-3-a.html

I cannot fathom why a RAW update is not compatible with all versions of Aperture 3. This is forced redundancy in my opinion. Not happy...
I understand that this is annoying for you, but it is part of the redesign of MacOS to make it more efficient and not to waste disk space on redundant installations.
The recent raw update - as I see it - is an update to Mac OS X 10.8.x, not to Aperture. Since Mac OS X Lion Apple has started to migrate the raw support directly to the OS, so they do not need to install the raw support as update to many different applications. I have not checked yet - is this update included in Lion as well? I sincerely hope so.
Send feedback to Apple that you need this upgraded raw support also available in Snow Leopard.
http://www.apple.com/feedback/aperture.html
Léonie

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02

Digital Camera RAW 3.11 is out

Similar Messages

Maybe you are looking for