Digital Camera RAW Compatibility Update 3.13

Digital Camera Raw 3.13 just released
Supported by Digital Camera RAW Compatibility Update 3.13
Canon EOS-1D X
Nikon D800E
Nikon D3200
Olympus OM-D E-M5
Panasonic LUMIX DMC-GF5
Sony Alpha SLT-A57

Well done code cutters at Aperture. At first glance the Digital Camera RAW Compatibility Update 3.13 seems to have fixed the problem. The quickness of your action is appreciated!

Similar Messages

Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

Hi
I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
Hmmm
Checking iPhoto ...
About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
Unfortunately this is only an update.
So I need to install first a newer Iphoto version.
Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
Lost!
How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
Any help welcome
Thx
Wolfgang

I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them. Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
The error:
Installer quit unexpectedly.
Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
Backtrace not available
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000055 ebx: 0x00000000 ecx: 0x00000000 edx: 0x00000000
edi: 0x00000000 esi: 0x00000000 ebp: 0x00000000 esp: 0x00000000
ss: 0x0000001f efl: 0x00010203 eip: 0x8fe01030 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000000
cr2: 0xfffffffc
Binary images description not available...
This laptop cannot be upgraded further without hindering its performance. Hence, I need to keep the version of iPhoto that I currently have.
Thank you for your response.

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02

Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
Please - any help would be very gratefully received

That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
Message was edited by: Ailish Eklof

Camera not in list for Digital Camera RAW Compatibility Update 3.11

Do I need this update if my camera isn't in the list of supported cameras?

45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to the Digital Camera Raw compatibility update 3.11?

Is Digital Camera RAW Compatibility Update 4.06 Affecting My Drivers?

After installing Digital Camera RAW Compatibility Update 4.06 and booted in windows 7, I can hear the windows startup sound but there is no display. After rebooting using the last good know config, I was able to login into windows but my ethernet and bluetooth are not working. In the device manager,
Ethernet and bluetooth device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Maybe. I don't know. I was able to use my ethernet before the update. After the update, I am facing these driver issues. My ethernet adapter cannot be found in the list of network connections.

Uninstalling Digital Camera Raw Compatibility Update 3.2 (5.5MB)

I need to uninstall Digital Camera Raw Compatibility Update 3.2 (5.5MB) file from my computer. Any help as to how I can do that???

Hi again...
Sorry not got a definitive answer for you, but I see no one else has responded yet... perhaps it cant be done..... I am fairly confident that there's no way you can remove a duff update through Time Machine...
Do you have a vault back up...? Vaults will restore all your images plus all the versions you created and every adjustment you have ever made... in short... everything.... you have ever done in Aperture....
If not.... ouch...!
You might have to seek help from an Apple genius in your local Apple store...
Hopefully someone here will have an answer for you..
Hoping..... Gerry...

Unable to update to Digital Camera RAW Compatibility Update 5.03

This is probably an Apple Update issue, but is anyone else experieincing a greyed out Update button. I restarted and the update button was available again. Initieated download, but got no message about installing our any success in updating it, so for now it remains in my update available pane for several days. Real pain! Any ideas on how to force or troubleshoot this update issue? Running Mavericks 10.9.1

What is your Aperture version? Is it compatible with the latest raw support? At least Aperture 9.4.5
Any ideas on how to force or troubleshoot this update issue?
Have you checked, if the update has actually been installed? You can see in the "About" panel the version of raw support that Aperture is using.
If the raw support has not been installed, try to download it from the Support page:
Digital Camera RAW Compatibility Update 5.03 http://support.apple.com/kb/DL1717
Sometimes you can recover unfinished downloads by using the menu item "Store > Check for unfinished downloads" in the App Store menu.

Can't install Digital Camera Raw Compatibility Update 2.2

Software Update wants to install Digital Camera Raw Compatibility Update 2.2, but it always fails, saying: "The update “Digital Camera Raw Compatibility Update” can’t be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
I've tried doing Repair Permissions in Disk Utility, but this has not helped. I'm using Mac OS X 10.5.5, all other recent updates have gone in fine.

I had the same problem. Deleting the contents of the HD/library/Updates worked.
Never the less I noticed that the permission set was different:
Original permission set: admin R&W, admin R only, everyone R only.
I also followed the Alias and found two files with the same permissions.
Re-downloading (via software update) revealed a new permission set:
(Me) R&W, Admin R&W, everyone Read only
In both the alias and the two files downloaded. Note that (Me) denotes your user with administrator access.
I believe that, since the update was downloaded automatically, the permissions were mismatched and instead of adding a system R&W privileges it added a second Admin Read only permission.
Adding an administrator user with read and write permissions should solve the problem (as long as you authenticate as that particular administrator when prompted for intall authorization).
Regards, Jaime.

Digital camera RAW compatibility Update

What is this update and is it important in the running of my OS? I'm not sure why I am getting these updates from the AP store but ever since I updated to Yosemite, I've gotten two of these. Can someone please explain to me what this update actually is?
Thanks!

Hello LBann,
Welcome to the Apple Support Communities!
These digital camera RAW compatibility updates allow different digital cameras to use the RAW format when importing to programs such as Aperture and iPhoto. Please read over the attached article for more information.
OS X Yosemite: Supported digital camera RAW formats - Apple Support
Have a great day,
Joe

Digital Camera Raw Compatibility Update 2.7

Having trouble updating my MacBook. The network crashed during my latest update, now whenever I try to update, it tells me "The update 'Digital Camera Raw Compatibility Update' can't be saved. A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the internet, then try again." I am connected to the internet as I am posting this from said computer, and continually get the same error message. Any suggestions? Thanks

I expect the network error is because it is trying to use old connection data that is no longer relevant so i was looking to remove its reference so it could start afresh. It seems that location is not pertinent.
Good software should be able to recover from this error, but yours seems hung up on its past attempt.
I don't know how you can fix this. Maybe someone else knows. Sorry I could not help.

Digital Camera RAW Compatibility Update 2.2 - White Balance Temperature

Prior to downloading the Digital Camera RAW Compatibility Update 2.2 I was importing RAW photos without a problem. Now all my photos are imported with a temperature of 2500K. I have a second computer on which this update hasn't been loaded and photos load with the proper temperature setting. When I load photos in Photoshop the temperature is indicated correctly. My DSLR is a fairly old Canon D60. Any suggestions?

Mark:
Welcome to the Apple Discussions. You can downgrade to 2.1 as described in this post:
Source:http://discussions.apple.com/message.jspa?messageID=8142169#8142169
Page Title: Apple - Support - Discussions - Can't import Canon RAW's (400D) to ...
Date: Wednesday, September 24, 2008 7:26:47 PM
This might work (from Clem who figured it out):
Delete the file: System/Library/CoreServices/RawCamera.bundle then (re)install the previous version.
Get the previous version here:
http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
Restart your computer.
Althought the fix was for correcting the problem of not being able to import at all it does give a means of downgrading to 2.1.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Digital Camera Raw Compatibility update installation issues.

I have attempted to install the Digital Camera Raw Compatibility update 6.01 but I am being asked over and over to restart my Mac Pro. The app store shows that I still need to install the update.

I was surprised to see it listed.
I don't have a shiny new Leica . Will have to make do with my shiny new RX1R .
(Added:)
I don't follow Medium-Format equipment, but a quick check tells me the Pentax 645D came out in 2010.
Message was edited by: Kirby Krieger

HT201070 Software update - Digital Camera RAW compatability update 4.04

I have an Imac and about 6 months ago the "Updates" tab in "Applications" reflected the following update "Digital Camera RAW compatability update 4.04" When I tried to update this in applications it has for 6 months given me a time out error. I cannot remove it from the updates tab in applications and it is blocking other updates, how can I resolve this?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Why does Digital Camera RAW Compatibility Update 4.09 OSX 10.8.5 crash my iMac?

Why does Digital Camera RAW Compatibility Update 4.09 OSX 10.8.5 crash my iMac? I can only restart with the ON/Off button.
Rolf

Are you getting a four language screen telling you to restart? That's a kernel panic. That can often happen due to RAM or data corruption issues. See my FAQ*:
http://www.macmaps.com/kernelpanic.html

Digital Camera RAW Compatibility Update 3.13

Similar Messages

Maybe you are looking for