Digital Camera RAW Update 4.05 for Aperture and iPhoto - Fujifilm Users Rejoice

If you have a Fuji camera, hit Software Update. As of this posting it doesn't show up in Apple.com downloads.

Isn't that nice, Thomas? And so soon! I just installed 4.04.
http://support.apple.com/kb/HT5371

Similar Messages

  • Installed digital camera raw update 3.8, but Aperture doesn't recognize Oly E-P3 raw files

    I was excited to see that the digital camera raw compatibility update 3.8 purported to provide support for Olympus E-P3 raw files. I installed it from Software Update, and Aperture 3.1.3 (OSX 10.6.8) still showed the raw files as "unsupported". I restarted my Mac, got the same result. I downloaded and installed the standalone update, and again got the same result. Has anyone else had success with the update?

    I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
    In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem.

  • Digital Camera Raw update 4.02

    is out in software update. I don;t see it on the Apple site yet however.
    This from software update

    Discovered that the problem exists only with E-PM2 RAW files imported into Aperture before applying Digital Camera Raw Update 4.02. (I had been shooting RAW+JPEG since getting the camera, while waiting for RAW support.
    Found a solution:
    Select all the problem files. Choose "Reprocess Originals" from the Photos menu. Done.

  • Digital Camera RAW Update 5.02 breaks Sony RX100 lens distortion correction (AGAIN!)

    Just like with the Digital Camera RAW Update 4.08, the latest 5.02 update breaks the Sony RX100 lens distortion correction again. I'm reverted back to 5.01 until this is fixed.
    From your Time Machine backup, restore the previous versions of
    /System/Library/CoreServices/RawCamera.bundle
    /System/Library/CoreServices/RawCameraSupport.bundle

    Yes, I noticed it too, but I wasn't certain it was 5.02 that did it as I sold my RX100 and haven't processes any files for a while. Then as part of the NR discussion here I looked at some old RX100 files, and the distortion correction now disappears. Unfortunately I can't really revert to 5.01 because I was waiting on the A7 support 5.02 brought.
    Apple are aware of it, so hopefully the fix will be quick to arrive.
    Andy

  • When will the new camera raw update come out for my nikon d7100

    when will the new camera raw update come out for my nikon d7100

    Hi,
    See if this answers your question:
    http://forums.adobe.com/thread/1178283?tstart=0

  • HT1338 I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?

    I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?  Help!

    Also when I do the system update it's not giving me an update for the latest Snow Leopard. I never knew that was available until I started looking around this site and it seems that since I have the internal dual core I should be able to update to mountian lion...is this correct? Will someone please help me and walk me through this. I love my mac I want to have it running like it should be.

  • Digital Camera Raw Update

    TUAW reports there's a new update to support more digital cameras. I didn't see a thread here, so I thought I'd share in case some of you were waiting for support.
    Apple has released Digital Camera Raw Compatibility Update 3.1 via Software Update. The update can also be downloaded here. The 6.77 MB (web) or 7.2 MB (Software Update) update requires Mac OS X 10.5.8 or 10.6.2, and extends RAW image compatibility for Aperture 3 and iPhoto '09 for the following cameras:
    o. Hasselblad H3DII-50
    o. Leica M9
    o. Leica X1
    o. Olympus E-P1
    o. Olympus E-P2
    o. Panasonic Lumix DMC-GF1
    o. Pentax K-7
    o. Pentax K-x
    o. Sony Alpha DSLR-A500
    o. Sony Alpha DSLR-A550
    o. Sony Alpha DSLR-A850

    I am running Aperture 2, and iPhoto 09, with a Pentax Kx.
    Either the 3.1 update, or the ProKit upgrade, killed reading of my DNG files in Aperture.
    Although Software Update shows them as recommended for iPhoto 9 and Aperture users, I would suggest passing on them if you are still in Aperture 2.

  • Digital Camera RAW update 2.1 (requires 10.5.3) XSi/450D support:

    http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
    Digital Camera RAW Compatibility Update 2.1
    About Digital Camera RAW Compatibility Update 2.
    This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
    Canon EOS Digital Rebel XSi/Kiss Digital x2/450D
    Epson R-D1
    Leaf AFi 7
    Leaf AFi 6
    Leaf AFi 5
    Pentax K200D
    Pentax K20D

    Firstly, the best method I have found (superior to Adobe Import/Convert/Export) is to install the software from the A300 CD - I know, blasphemy. Anyhow, you can delete all except for the RAW Image Converter, which lets you do raw editing, its decent, and then export into whatever file type and size that is convenient for you, though its not the same as native Raw support, I know.
    Quirks: Not many, its a great camera, I've had mine for about a month and a half now. The AF Assist light drains battery like an electric car, and I can't say that I totally appreciate the inability to invert the focus ring direction. Ergonomics whilst wearing glasses is mediocre at best and your screen will get dirty - you'll have to deal with it. Otherwise, its absolutely an amazing camera, DO NOT RETURN YOURS!!! As you can see, there are a few quirks, but if I were to write down its positives above cameras prices three times as much, the list would take up pages. keep it, its too good to care for the little things like that.

  • Why i cannot update the digital camera RAW COMPATIBILITY UPDTE 5.0.4 AND ALWAYS ASK TO UPDATE IT WITHOUT UPDATING

    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success

    toniak61 wrote:
    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success
    Because something is wrong.  Most likely, either:
    (1) your Mac OS X Startup disk is damaged and you need to repair or reinstall OS X,
         - or -
    (2) you are not following the correct update workflow and should use the help from this Apple article. 
    For instance, if you are trying to update via  > Software Update..., restart Mac and download and install the Download Center version: Digital Camera RAW Compatibility Update 5.04.

  • How do I install Camera Raw update aget downloading for Photoshop CS6 Ext on Windows 7 64bit

    How do I install Camera Raw update 6.7 after downloading for Photoshop 6 Ext 64 bit
    on Windows 7?

    Camera 6 and its update are for Photoshop CS5 , for Photoshop CS6 we have camera raw 7.

  • I can't switch editing my d4s files to photoshop..when will the camera raw update be available for this camera for cs5?

    help!!! i can't switch from lightroom to photoshop cs5 because it won't read and i need a camera raw update..when will this update be available??

    Moving this discussion to the Photoshop General Discussion forum.
    Beccaellison as an alternative you may want to consider posting your inquiry to the Photoshop Lightroom forum at Photoshop Lightroom.

  • New Camera Raw Update doesn't support Aperture 2.1.4?

    I just did an OS update for Camera Raw and am now able to read my Canon 550D/T2i RAW files using Preview. However, in my Aperture 2.1.4, I still get "Unsupported Image Format". Does the update not support Aperture 2.1.4 ? I thought Aperture's ability to read RAW files is tied to the OS's ability.

    RAW support page is here:
    http://www.apple.com/aperture/specs/raw.html
    Note:
    EOS Rebel T2i EF-S / 550D / Kiss X4**
    Indicates it requires Aperture 3 or later.

  • How do I make the Digital Camera Raw update go away?

    I have no idea what 'RAW' is, so this update is useless to me. But it won't go away, not even after I try to hide it. It won't hide! How can I fix this?

    Just install it anyway. It's a tiny download and it's not worth stressing yourself over.
    'RAW' in this case is referring to the raw image data from a Digital Camera's image sensor. Since each camera's sensor works differently, the RAW format differs for each camera, and support updates have to be released occasionally.
    You may think you don't need this update, but it is not as pointless as you think.

  • New Camera Raw Update adds support for extra cameras

    http://support.apple.com/kb/DL1072
    This update extends RAW image format compatibility to Aperture 3 and iPhoto '09 for the following cameras:
    Canon PowerShot SX1 IS
    Olympus E-PL1
    Panasonic Lumix DMC-G2
    Panasonic Lumix DMC-G10
    Samsung NX10
    Sony Alpha DSLR-A390
    Sony Alpha NEX-3
    Sony Alpha NEX-5
    As always: Back up first
    Regards
    TD

    Hi,
    See if this answers your question:
    http://forums.adobe.com/thread/1178283?tstart=0

  • New Camera Raw Update adds support for more cameras.

    http://support.apple.com/kb/DL1072
    This update extends RAW image format compatibility to Aperture 3 and iPhoto '09 for the following cameras:
    Canon PowerShot SX1 IS
    Olympus E-PL1
    Panasonic Lumix DMC-G2
    Panasonic Lumix DMC-G10
    Samsung NX10
    Sony Alpha DSLR-A390
    Sony Alpha NEX-3
    Sony Alpha NEX-5
    As always: Back up first
    Regards
    TD

    Hi,
    See if this answers your question:
    http://forums.adobe.com/thread/1178283?tstart=0

Maybe you are looking for

  • To get details after second list in interactive report

    hai abap experts, i got a problem, i have written acode in which 3rd list is not executing how to write code for 3rd list(my 3rd list is to get item details by call transaction 'me23') i'll send u all my  code lz check n help out. TABLES : EKKO,     

  • How access textarea in jsp ?

    Hai I am new to j2ee, please give me an idea that how can i access textarea values by using session varibale in jsp ? I try the following coding but it s say error msg "cannt resolve the symbol Enter the Address <textarea name=address cols=20 rows=5>

  • Difference of Seeberger AS2 and Seeberger EDI adapter

    Hi All,          What is the difference of Seeberger AS2 adapter and Seeberger EDI adapter?. is it both are same or not? Regards, Ramesh

  • Issue merging multiple images in PS Elements Mac

    I want to merge multiple images using PS Elements Editor/Organiser for Mac - when I click 'expert', then 'enhance' then 'photomerge' then 'Panorama' as suggested in 'Help' I get this error window: I appears to be some sort of s/w issue but would valu

  • Transport via CMS into two diferent XI landscapes

    Hello, we have one XI development system and have to transport the design and configuration objects to two different sets of consolidation and productive sets. we set up two tracks in the landscape configurator, but the exported objects only appear i