DIGITAL DATA STORAGE TAPE LIBRARY MODEL #811

What is the capacity of the tape drive or tapes?

I would look for a DLT deck or robot... much more storage... Quantum Autoloader Tape Library Storage DLT TH5FA (FOR EXAMPLE). 7 20/40gig
tape robot.
there are a bunch of them out there... GOOGLE, look on Ebay....
just my $0.02 worth.
haroldkarl

Similar Messages

Can iTunes from 2 different computer use the same library? (from wireless data storage device)

I purchased a wireless data storage device. My iTunes content will be moved there and I'm planning on moving my wife's iTunes data to the wireless device. Can both our iTunes share the same library?

One Apple ID can be shared for store purchases. On the iPhone go to Settings>Store and put in the ID. Then all the songs purchased with that ID can be downloaded from the iTunes store on the phone.
I hope that is what you were asking?

Installing Sun Storage C4 - Tape Library on IBM p550Q

All,
Need your advise, what should we prepare to install Sun Storage C4 Tape Library attached to IBM P550Q?
I read the information about supported OS on C4 Tape Library are only Windows, Linux and Solaris. So, how do we reveal with this situation?
regards,
/hendra

I'm looking for the same thing -
Were you able to location any documentation?
I've been trying to get my hands on the documentation
for the C4. Sun's doc site does not have this product
listed at all. The product documentation link
(http://docs.sun.com/app/docs/prod/1878#hic) just
returns " The requested item could not be found."
I've even tried opening up a case with Sun. First,
the support people had no idea what the C4 was. After
3 days and 3 support engineers, I finally found one
who understood what this product was, but I was then
told that getting the documentation would be on a
time and materials basis. I'd rather not have to pay
$400+ for documentation that should be on their
website, just like all their other equipment. I'm
currently using the Quantum PX502 documentation as a
reference, but I'd really like to see Sun specific
documentation.
Any ideas?
Thanks.I'm looking for the same thing -
Were you able to location any documentation?

Tape Library Concern - Eject & Reinsertion after each backup

Here is what I am currently using.
System overview:
-HP Proliant DL380p Gen 8
-HP D2600 2TB 3G SATA LFF - 24TB Storageworks array
-Quantum Scalar i40
(2) HP LTO-5 tape heads
(25) Licensed slots
Tape library is configured as one partition
Windows 2012 R2 - fully patched
DPM 2012 R2 Data Center Edition with 7/2014 Update Rollup 3
I have used DPM for about 6 years since 2007 version but I have always used stand alone LTO-3 & LTO-5 tape drives. I
have used tape libraries before that time but with a different product.
Here is the scenario I am seeing. Any tapes jobs that are scheduled at the same time will
pull a tape into each tape drive and backups are performed. All is working normal from that perspective. The problem I see is that after each backup is completed the tape is removed from the drive, placed back in the slot, removed again from the
slot and then re-inserted back into the drive to continue with the next backup job that was scheduled at the same time as the previous one.
This seems highly inefficient and time consuming not to mention a lot of extra wear & tear
on the library & tapes. Is this behavior normal? If so, can it be changed? or is it is bug?
I would expect the tape to remain in the tape drive until all backups are completed assuming they
had available capacity and were not off-site ready. It appears if multiple servers are in the same protection group the tape is not removed between these backups. The issue appears to be when the next separate protection group is backed up.
I’d even be up to manually moving the tape and leaving it in the tape in drive but I don’t see
that kind of library control with DPM.
I saw another thread from August where someone mentioned seeing this behavior when doing verifies
on their backups.
Thoughts? PSS call?
Thanks!

I'm seeing that if a protection group consisting of hundreds of small SQL databases is configured for short term disk and long term tape, and configured to use 2 drives, that after EACH DATABASE the tape is rewound and re-slotted, only to be re-inserted
into the drive and fast forwarded to the end for the next database to be written.
If you've got hundreds of databases (many small, like msdn, model, etc) this can push the time out to 3 minutes plus per database taped, even for a 5MB database.
My current workaround is to configure the protection group to only allow the use of a single drive.
Doing so seems to reduce the time per database from 5 minutes down to 30 seconds, presumably just REW and FF tape movement.
Even though the time is reduced, I'm still disappointed the progress between databases doesn't continuously stream. I mean 100 small 5MB databases should only take 7 seconds, if streaming at 70MB/s to tape. Instead it's 30 seconds per 5MB database.
:(

Integration of RMAN with virtual tape library

OS: Oracle Linux 5.5 UEK (Virtualbox)
Oracle: 11gR2 11.2.0.1 Enterprise + ASM (Virtualbox)
Hello,
I would like to test something about RMAN and writing directly to tape. For this I installed mhvtl, a virtual tape library. The installation was pretty easy. http://sites.google.com/site/linuxvtl2/
RMAN does not recognize any tape in the system.
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
What I found out is that in order to make backups to a media manager, RMAN must communicate with a media management library, which is a 3rd party library that is not supplied by Oracle. So I guess unless there is a Oracle MML library available for mtx I' out of luck here.
Any ideas? Thanks!
rpm -ivh mhvtl-0.18-13.x86_64.rpm
rpm -ivh mhvtl-0.18-13.src.rpm
cd /usr/src/redhat/SOURCES/
tar zxvf ../SOURCES/mhvtl-2011-01-11.tgz
cd mhvtl-0.18/kernel
make
make install
/etc/init.d/mhvtl start
yum install mtx
The tape library and using it for backup from system seems to work fine:
# mtx status
Storage Changer /dev/changer:4 Drives, 43 Slots ( 4 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = E03001L4
etc.
# mtx load 1
Drive 0 Full (Storage Element 1 loaded)
# tar cf /dev/ntape ./
# tar tvf /dev/ntape
Edited by: Dude on Jan 20, 2011 5:22 PM

Thanks for the tip!
I installed Oracle Secure Backup Express and spend all afternoon with this strange product, mainly to troubleshoot the installation and setup. I'm not really sure everything works - it's quite a piece of software, as usual.
I ran into a couple of issues that were not mentioned in the installation documentation:
- install sg3_utils
- use obtool to register the server as mediaserver
# sg_map -i -x
/dev/sg9 3 0 1 0 1 /dev/nst0 IBM ULT3580-TD5 550V
/dev/sg10 3 0 2 0 1 /dev/nst1 IBM ULT3580-TD5 550V
/dev/sg11 3 0 3 0 1 /dev/nst2 IBM ULT3580-TD4 550V
/dev/sg12 3 0 4 0 1 /dev/nst3 IBM ULT3580-TD4 550V
/dev/sg13 3 0 9 0 1 /dev/nst4 IBM ULT3580-TD4 550V
/dev/sg14 3 0 10 0 1 /dev/nst5 IBM ULT3580-TD4 550V
/dev/sg15 3 0 11 0 1 /dev/nst6 IBM ULT3580-TD4 550V
/dev/sg16 3 0 12 0 1 /dev/nst7 IBM ULT3580-TD4 550V
/dev/sg17 3 0 0 0 8 STK L700 550V
/dev/sg18 3 0 8 0 8 SPECTRA PYTHON 550V
# obtool
ob> chhost --addrole mediaserver ol55
ob> mkdev -t library -o -a ol55:/dev/sg18 library1
ob> mkdev -t tape -o -a ol55:/dev/sg9 -l library1 -d 1 tape1
RMAN was not happy with it:
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
# cat /usr/tmp/obproxyd.log
2011/01/23.02:11:10 [5431] can't set root privileges; continuing anyway - program isn't stamped setuid-root (OB utilities)
2011/01/23.02:11:10 [5431] can't listen for connections - Operation not permitted
Document ID 396046.1 solution outlines to correct the hostname or mediaserver name. However, this was not the problem. I finally figured that /etc/obproxyd is a symlink to a .wrapper script which points to the actual proxy application. The fix was:
#chmod +s /usr/local/oracle/backup/.etc.linux86_64obproxyd
After this the error changed:
RMAN-03009: failure of backup command on ORA_SBT_TAPE_1 channel at 01/23/2011 02:43:36
ORA-19506: failed to create sequential file, name="3cm2q2an_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece 3cm2q2an_1_1 failed.
(Oracle Secure Backup error: 'no preauth config found for OS user (OB tools) oracle').
The fix for this error:
https://10.0.0.6, login as 'admin'
Configure->Users->Select Admin->Edit->Preauthorized Access->Add user 'Oracle' (select host and rman)
RMAN> backup database;
Starting backup at 23-JAN-11
using channel ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: starting full datafile backup set
channel ORA_SBT_TAPE_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/scratch/oradata/test/system01.dbf
input datafile file number=00002 name=/scratch/oradata/test/sysaux01.dbf
input datafile file number=00003 name=/scratch/oradata/test/undotbs01.dbf
input datafile file number=00005 name=/scratch/oradata/test/users02.dbf
input datafile file number=00004 name=/scratch/oradata/test/users01.dbf
channel ORA_SBT_TAPE_1: starting piece 1 at 23-JAN-11
Now it just sits there forever and the log just keeps adding the following lines:
# cat obproxyd.log
2011/01/23.03:00:31 [5662] handle_qsp_msg: received get job state request
2011/01/23.03:00:31 [5662] job id 'admin/5.1'
Strange, backup to tape with 'mtx' and 'tar' works, so the problem might be OSB.
Edited by: Dude on Jan 22, 2011 8:32 PM
I finally got it running. I deleted the current library and drive configuration and used the webtool to configure the other library at /dev/sg17. it was also necessary to use the webtool to load a volume into the drive. Unfortunately I did not note down the steps in details. Maybe next time.
channel ORA_SBT_TAPE_1: starting piece 1 at 23-JAN-11
channel ORA_SBT_TAPE_1: finished piece 1 at 23-JAN-11
piece handle=3im2qc42_1_1 tag=TAG20110123T053042 comment=API Version 2.0,MMS Version 10.2.0.3
channel ORA_SBT_TAPE_1: backup set complete, elapsed time: 00:03:26
Finished backup at 23-JAN-11
Starting Control File and SPFILE Autobackup at 23-JAN-11
piece handle=c-2036659790-20110123-00 comment=API Version 2.0,MMS Version 10.2.0.3
Finished Control File and SPFILE Autobackup at 23-JAN-11

Organizing footage tape library automatically??? Program or Shareware???

I have shot 200-300 mini-DV tapes full of footage over the years. I built a wall rack to hold all of my tapes. I want to go through all of them and organize the tapes and footage notes. Is there a program I can download or buy that would allow me to pop tape number 001 in the deck conected to my Mac and say take a frame grab every 30 or 60 seconds from beginning to end and then organize into a printable proof sheet so I can see at a glance what is on every one of my tapes. Maybe put all of the sheets into a thick notebook on my edit desk. Maybe have a time code stamp next to each thumbnail pic. I have went though some of the tapes and just watched the tapes and logged by hand some of the highlights of each tape along with time code notes, date shot, time shot, location etc. I feel that having a proof sheet with sample frames of video would be more user friendly for me. Any one have any info on programs or shareware for this. Please tell me how "you" organize your tape library.
Thanks in advance for any ideas on this!!!
Frank
www.SharkFootage.com
eMac 1.25ghz/1gb RAM/160gb Internal HD/Superdrive/External NTSC video monitor Mac OS X (10.3.9) External Firewire HD's Lacie 160GB for FCE scratch disk & three 250GB for archives
eMac 1.25ghz/1gb RAM/160gb Internal HD/Superdrive Mac OS X (10.3.9) External Firewire HD's Lacie 160GB for FCE scratch disk & two 250GB for archives

Please let us know how you make out on this project. I'm curious because, even in a corporate environment, we can't make any video database function worth diddle because of the incredible time/effort requirements. Assuming not all 300 tapes are full, that's still about 200 hours worth of material. Just viewing it and attempting to log it will take 5, 40-hour weeks of doing nothing but sitting in front of your monitors, loading tapes and keystroking. And that just gets the logs built. it doesn't pull in the video.
I can tell you one thing for certain. The single most important part about digital asset management is designing the catalog before you start trying to fill it up. And I can also tell that, in dozens of case studies I've seen, this step is rarely done. It is only performed by experienced database suers and those who have been trained in library arts.
Digital asset management is a huge hole into which you can pour time and money and end up with nothing of value.
bogiesan

DPM 2010 How to use autoloader tape library

Dear Team
Hello All,
We have implemented the DPM 2010 successfully in our organization. But while creating the protection group it shows the tape library name but not the individual tapes.
So, our requirement is as below.
We want to create the daily backup in one tape. and weekly backup in another tape.
How we can select the specific tape Slot in library for different backup?
An early response will be highly appreciated.
Regards
Selvaraj.S
[email protected]

Hi,
DPM has a flat tape handling model and does not provide the direct ability to assign certain tapes or slots to specific backup jobs. Depending on the retention period of the two goals, DPM should use separate tapes by default. You have
some control by tweaking the TapeWritePeriodRatio and ExpiryToleranceRange settings.
See the following resources for more information on the above parameters:
Enabling Data Co-Location on DPM
http://technet.microsoft.com/en-us/library/ff399230.aspx
http://blogs.technet.com/b/dpm/archive/2012/05/14/things-you-can-do-to-help-data-protection-manager-utilize-your-tapes-full-capacity.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847`

Uploading to online data storage: Now cannot download songs into iTunes

Hello all.
I am not seeing this one on any FAQs, knowledge bases, or discussion boards yet:
I am doing my initial upload of files to SugarSync, a highly-recommended online data storage service. Since I started, I cannot download songs into iTunes, even from the iTunes Store.
On any new downloads from the iTunes Store, the song DOES appear in the Music library view but immediately after completing the download it shows the exclamation point warning that the file is not in its location. The new folders get created properly within the iTunes Music folder but the subfolder where the song should be is empty. Each time I had to write iTunes Support to get them to make the files available.
I can still add files manually, no problem. E.g., I can add *.mp3 or *.wav files or folders, I can convert them to AAC, etc. The glitch seems to occur only when automated loads into iTunes are operating.
As a test, I downloaded a song from Amazon. Here the problem was different but I could work around it manually. Normally the Amazon process loads songs automatically into iTunes, too. Here again, the download did create the proper folder in the iTunes Music folder, as it should, but this time the symptoms were reversed:
(a) the mp3 file WAS in its folder as it should be (w/the iTunes DL, the file was NOT there)
(b) the song did NOT appear in the iTunes Music view (w/the iTunes DL, the song DID appear)
(c) I was able to browse to the file and tell it manually to load into iTunes (w/iTunes I had to write Support and wait a day).
(I wonder what's the cause of the differences between the two cases.)
Strictly speaking, I can't PROVE the problem has anything to do with SugarSync (which otherwise seems good so far), but the DL problem started as soon as I started using it. Something in the SugarSync upload or file-monitoring process, or an odd thin gin iTunes, seems to be preventing automated, direct loads into iTunes. And since the data service runs in background, so it can monitor file changes, that might mean I can't buy music anymore! Obviously that would be a dealbreaker with SS. (I have contacted SS on this but they've not had fair chance to reply yet.)
1) Anyone else have this problem?
2) Is this permanent or just temporary while I am doing the initial upload?
3) Anyone know a solution?
(FYI, I am a highly-experienced user and otherwise quite handy with iTunes files, library moves, and backups. My library is entirely consolidated and all AAC.)
Thanks.
(Oh, and this occurred in both iTunes 8 and the new iTunes 9, so it seems unrelated to the upgrade this week.)

UPDATE 1. CHANGING BROWSER HELPED -- OR DID IT?
I called Apple iTunes Support, who said the problem is new to them. The technician's hypothesis was that something, perhaps browser-related, was interfering with the initial creation of a temporary file (which should go to the Recycle Bin) that instead causes the completed file to go to there.
He noted that iTunes, though not going through one's browser onscreen, does use settings within one's default browser. I use Mozilla Firefox, so we switched to IE as the default browser, restarted iTunes, and the song downloaded with no problem! Then I switched back to Mozilla, restarted iTunes, and it worked AGAIN with no problem!
(Dutifully I advised SugarSync, which is still investigating.)
UPDATE 2: ARTIST NAME CHANGE - SOME FILES GOT MIS-MOVED / MIS-CHANGED
Definitely something still wrong. This time some pre-existing song entries (not new downloads) lost their connection to their source file.
In iTunes, which manages folder names for artists and albums automatically, I corrected the spelling for an Artist, so immediately iTunes renamed the folder, and automatically SugarSync noted the change to be uploaded. While the changed folder name and all the songs within were still uploading to SS, in iTunes I saw exclamation points come up -- but only for some of them. Most files got moved or changed correctly, but several lost connection to their file (i.e., the file was removed for the original misnamed folder but never moved into the correctly-named folder). Weird.
Worse, in only some of those cases did I find the missing *.m4a file in the Recycle bin. (I had to retrieve old, original *.mp3 versions from another folder and re-import each into iTunes manually.) I've never seen iTunes have a problem managing an Artist rename until I started using the live SS process.
(I've reported this to SS and asked if there is a way to disable temporarily SS to see if that's the problem.)
[Note: I am willing to try downloads again but I am wary of trying to rename entire Artists (Folder) again. That was a lot of work.]
====
UPDATE 3: SERIES OF TESTS - 1 FAILURE USING iTUNES
Still problem occurs, but not always. Today, I rebooted PC. I tried CD, iTunes, & Amazon. I varied having the browser open when using iTunes.
Here are the results of a series of attempts to download songs. "FAIL" means the file did not load properly into iTunes or loaded but lost its connection (exclamation point warning).
# Source Mozilla #Songs Result
1 CD Closed 1 OK
2 iTunes Closed 1 OK
3 Amazon Open 2 OK
4 iTunes Open 1 FAIL
5 Amazon Open 1 OK
6 iTunes Closed 1 OK
7 Amazon Open 2 OK
8 iTunes Open 2 OK
(I reported this to SS. Hoping they'll test and find the problem.)

2.23 Apps must follow the iOS Data Storage Guidelines or they will be rejected

My Multi Issue v14 App (24124) was just rejected by Apple. Apparently because storage of the data (folios?) was not iCloud compatible.
Is this related to v14? Would building a v15 app resolve the issue?
or is there some other problem?
Please advise...
Full text of Apple rejection below...
Nov 4, 2011 08:17 PM. From Apple.
2.23
We found that your app does not follow the iOS Data Storage Guidelines, which is not in compliance with the App Store Review Guidelines.
In particular, we found magazine downloads are not cached appropriately.
The iOS Data Store Guidelines specify:
"1. Only documents and other data that is user-generated, or that cannot otherwise be recreated by your application, should be stored in the /Documents directory and will be automatically backed up by iCloud.
2. Data that can be downloaded again or regenerated should be stored in the /Library/Caches directory. Examples of files you should put in the Caches directory include database cache files and downloadable content, such as that used by magazine, newspaper, and map applications.
3. Data that is used only temporarily should be stored in the /tmp directory. Although these files are not backed up to iCloud, remember to delete those files when you are done with them so that they do not continue to consume space on the user’s device."
For example, only content that the user creates using your app, e.g., documents, new files, edits, etc., may be stored in the/Documents directory - and backed up by iCloud. Other content that the user may use within the app cannot be stored in this directory; such content, e.g., preference files, database files, plists, etc., must be stored in the /Library/Caches directory.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
It would be appropriate to revise your app so that you store data as specified in the iOS Data Storage Guidelines.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. Please be sure to include any symbolicated crash logs, screenshots, or steps to reproduce the issues when you submit your request. For information on how to symbolicate and read a crash log, please see Tech Note TN2151 Understanding and Analyzing iPhone OS Application Crash Reports.
To appeal this review, please submit a request to the App Review Board.

You might want to check out our ANE (Adobe Native Extension) solution that enables your FB projects to abide by the Apple's Data Storage guidelines.
https://developer.apple.com/library/ios/#qa/qa1719/_index.html
Do Not Backup project:
http://www.jampot.ie/ane/ane-ios-data-storage-set-donotbackup-attribute-for-ios5-native-ex tension/
David
JamPot.ie

Error on clicking "Report Data Source" in library created using power pivot template

Hi,
On clicking on "Report Data Source" in library created using power pivot template i am getting below exception. Can some one help me in understanding the root cause / fix it.
Error being shown: Microsoft.ReportingServices.SharePoint.SharedService.Client.RecoverableCommunicationException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).
If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 8.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css">  System.ServiceModel.ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS
8.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css">  System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) -
-- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.get_IsWebServiceEnabled()
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.<>c__DisplayClass8`1.<ExecuteOnApplication>b__6(IReportServiceManagement proxy, Int32 dummy)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, IChannel channel, Int32 maxFaultSize)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext) -
-- End of inner exception stack trace ---
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnApplication[T](String operationName, String siteUrl, String xmlNamespace, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.Invoke[T](SPServiceContext serviceContext, String operationName, String siteUrl, String xmlNamespace, Guid serviceInstanceId, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceClient.Execute[TResult](String methodName, Func`2 action)
at Microsoft.ReportingServices.SharePoint.UI.BaseRSLayoutPage.ValidateReportServerConnection(SrvProxy rsProxy)
Followed steps from below link :
http://www.mssqltips.com/sqlservertip/3004/getting-started-with-power-view-reports-with-sharepoint-excel-and-sql-server/
Thanks,
Venugopal

Hi Venugopal,
Please refer to the blogs below and see if it works for your case:
http://sharepointerthilosh.blogspot.com/2013/10/sharepoint-2013-reports-unexpected.html
http://badalratra.wordpress.com/2014/03/13/error-the-content-type-texthtml/
To create a Power View report, start Power View from a
data model file in SharePoint Server 2010 or 2013. Models, or connections to models, can be in a SharePoint Server document library or in a
Power Pivot Gallery, a special purpose SharePoint Server document library that provides rich preview and document management for published Microsoft Excel workbooks that contain data models.
Please refer to the links below to get report in Power View in SharePoint server:
http://office.microsoft.com/en-in/excel-help/power-view-in-sharepoint-server-create-save-and-print-reports-HA102834736.aspx
http://office.microsoft.com/en-in/excel-help/create-a-connection-to-a-data-model-for-power-view-HA102835737.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

I need a memory management/ data storage recomendation for my IMac 2 GH Intel Core 2 Duo

Since giving my mid 2007 IMac a 2GB memory boost to accommodate Lion all has been well however my memory is full. I have a sizable ITunes library and 6000 photos in IPhoto, Me thinks I should store this all more effectively for the safety of the music and photos and for the well-being of the computer....but there seems to be choices. Is this where ICloud comes into play or time capsule or should I just get an external mini hard drive. Can anyone help me with some pearls of wisdom with data storage.

Greetings John,
There are two types of memory which you mention here.
The 2 GB memory you refer to is RAM. It is not used for storing information. Rather for giving the computer a place to do much of its work.
File storage is handled by the hard drive of the computer.
If your available hard drive space is getting low you can move larger files to a Mac Formatted external drive:
Faster connection (FW 800) drives:
http://store.apple.com/us/product/H2068VC/A
http://store.apple.com/us/product/TW315VC/A
http://store.apple.com/us/product/H0815VC/A
Normal speed (USB) drives:
http://store.apple.com/us/product/H6581ZM/A
Larger files can include entire databases like iTunes, iMovie, or iPhoto.
Keep in mind that if you move these items to an external drive you will have to have the drive plugged in and powered on to access the data on them. In addition, if you move important information off your internal drive to an external, you should be sure that your backup solution is backing up that external drive to keep your information safe.
iCloud is not a file storage solution and TimeCapsule is not suited for storing databases like those mentioned above (its meant primarily as a backup solution). I would stick with an external drive (1 to hold your big files and another one big enough to backup both your computer and the first drive).
Here are some other general computer clean up suggestions: http://thexlab.com/faqs/freeingspace.html.
Hope that helps.

How to set the IP address in L25 Tape library

I try to set the ip address in L25 tape library. But it is not stored in the NVRAM. For that purpose I restart the device. Then all the values are reset. please tell how to set the ip address.

Lylee,
Please take a look at the following links. The first describes how to distribute your application to multiple targets when using shared variables. The others are explaining alternate ways to change the IP address of a controller.
How Do I Distribute a Real-Time Application with Shared Variables to Multiple Users?
http://digital.ni.com/public.nsf/allkb/20C9771687E6BBB3862570E7006C2284?OpenDocument
How Do I Change the IP Address of a RT Series Controller (FieldPoint, cRIO, etc) that is not on the Local Subnet?
http://digital.ni.com/public.nsf/allkb/9F7548F5C781E05586256C75006D8B94?OpenDocument
Real-Time Target System Replication Tool
http://digital.ni.com/public.nsf/allkb/444A6A22A6EC50FB86257213004A878C?OpenDocument
http://digital.ni.com/public.nsf/allkb/DDD15965085446E68625733A00451C7A?OpenDocument
Can I Programmatically Assign an IP Address to My Real-Time Target?

Treo 755p The free data storage space on the device is low. Some data could not be saved

After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint)

Cluster and L1000 Tape Library

We are planning to purchase a tape library system for backing up the data on our cluster. I was wondering if any one ever used the Sun L1000 Tape library system with NetBackup. How do you like the L1000 and NetBackup? Is the L1000 tape library reliable? What kind of throughput do you get? We have a 2-node cluster E5500/E4500. I am planning to connect the tape library to an E250 and use it as the backup server.
Thank you in advance.

hi sjen,
it depends on the size of you databases and filesystems. the sun 250 should be ok, if you have enough memory. sometimes the network-interface (dfx) is a bottleneck.
lg michael

DIGITAL DATA STORAGE TAPE LIBRARY MODEL #811

Similar Messages

Maybe you are looking for