Digital Din and 2.1 systems.

Hi,
Currently have DTT2500 system and utilise digital din connection. Subwoofer is on the way out I think and I also have no need for a 5.1 system anymore,a good 2.1 system would fine but I am wondering what, if any, 2.1 system, offers digital connectivity.

The main reason I want a digital connection is that I currently have one and would prefer not to "trade down" to an analogue minijack. I currently have a soundblaster li've with the small expansion card that gives digital I/O (digital DIN, and I have also connected a small digital input/output module to the expansion card which gives spdif in and out in the form of coaxial and optical inputs/outputs). I suppose I could use the coaxial output on the module to connect to the megaworks?

Similar Messages

X-Fi Titanium supports Digital DIN connector from DTT35

Hi,
I'm looking for a new soundcard, and preferably one that works with my existing DTT3500 5. speakerset, which only has digital din, and no analogue inputs.
- Does the new X-Fi Titanium cards work with a Digital DIN connector from my DTT3500 speaker set?
- And if it does, does it carry 5. over Digital DIN or is it crippled to 2.
regards,
MrSnake

> Hi, I need the same information.
I have a new PC, and I would like to buy a new Sound Blaster X-Fi Titanium card.
But it is necessary that I'm able to connect the sound card to the DTT3500 speaker via Digital DIN cable (to have always 5. sound).
Someone could confirm this?
Thanks

Converting analog 5.1 (multiple cables) to Digital DIN (for Inspire 5700), how?

Hi,
So far I've been using my Inspire 5.1 Digital 5700 speaker system together with my Audigy Platinum in my Desktop PC to watch DVDs and play games with a 5.1 experience. To connect soundcard and Speaker system, I used the provided Digital DIN cable, and it worked fantastically, for both, DVDs and games.
Now I bought a notebook and the only choice to improve onboard sound was the X-Fi Xtreme Audio Notebook. I thought that I could simply connect it to my Inspire 5700 by connecting optical out with optical in using a TosLink-Mini -> Toslink cable. While this may work for DVDs (I don't have the cable yet), it won't work for all other applications, because as I read optical connections only provide a stereo signal unless the signal it'ss encoded via AC3 or DTS.
Of course there is the docking module which provides multichannel analog out. Trouble here: the Inspire 5700 only comes with two analog line in channels, front and rear. So that would lead to 4.0 instead of 5.1. Missing the center speaker for games is very bad.
Therefore I am looking for a way to convert the analog signal coming from the docking module into something that can be decoded as a 5.1 signal by the Inspire 5700. I have already found the DTS-610 which would turn the analog signal into a DTS signal. But that costs more than the soundcard itself.
So, my question: Is there any simpler / cheaper way how to transform multicable analog 5.1 to one-cable digital 5.1, either AC3, DTS or Digital DIN? I'd prefer a simple converter to Digital DIN, because that's what the Inspire 5700 was mainly designed for and it worked perfectly with my old Audigy.
Alternatively, one could possibly also use some fancy software to convert all the wave-out sound into AC3 or DTS and send it along the optical cable. But I don?t know any such software plus I expect this to drain a lot of processor power.
Any help is greatly appreciated it'ss kind of frustrating that two products of the same company can't be connected with each other, just because neither, the card nor the docking module provide Digital DIN.
Thank you very much and best regards
- spitfire
P.S. in another post, pjc said: You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket.
That's exactly what I'm looking for, but I couldn't find such a converter on the creative homepage.

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

FPS2000 w/ Audigy2 zs: Where to buy 1/8 male mini to 9 pin male digital din

I bought my FPS2000 Digital speaker system a few years ago and was not able to use the digital din connection because my Soundblaster sound card at the time did not have a digital out. Somewhere I lost my digital din connector. I now have the Audigy 2 zs and am looking to buy a digital din connector to hook up my speaker system. The only problem is the male mini /8 in to male digital din is the most impossible part to find. Is there anybody that knows a retailer or online store that has one to buy? Thanks
Message Edited by p2adan on 08-16-2005 03:08 AM

Ah, I have just found the cable here :-
http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0374
Unfortunately this is only in the US shop (who don't ship abroad) so I guess we Europeans will have to make do with some old string and hope for the best...

Dtt 3500 - Can't choose Dolby Digital DIN / PCM Audio

Hey all,
I've had a DTT 3500 for quite some time now and I was always very satisfied with this surround system.
I recently bought a new 7.1 System for my computer and now use the DTT 3500 along with my videobeamer to play Playstation 2 and XBox games... the soundoutput from these devices works perfect.
My problem is as follows:
I would like to use my DTT 3500 from my computer too, I hooked the DTT 3500 up to my Soundblaster Audigy 2 ZS soundcard with the "digital cable" that came with the DTT 3500. I then choose 5.1 speakers and "Digital Output Only"... but I don't hear any sound coming from the DTT 3500.
According to the manual I have to choose "Dolby Digital DIN / PCM Audio". When I try button with which one would accomplish that, I fail as I can only select Optical and Coaxial... I never get a "green light" next to "Dolby Digital DIN / PCM Audio".
Does anybody have the same problem?
The Audigy 2 ZS works wonderful with my 7.1 system and if I uncheck "Digital Output Only" I hear sound, all no problem... also, if I use an AC3 source (eg. XBox 360) I hear sound from the DTT 3500... I just have a problem hooking it up via digital output from my PC with Audigy 2 ZS...
Please help, this is driving me nuts! (And I tried to get it to work all sunday long... )
Cheers
Onkl

onkl0r,
Try disconnecting and then reconnect the DIN cable again. The speaker will need to detect a DIN connection first before the DIN option is selectable on the speaker end.
Jason

How to input/output a digital signal and acquire an analog signal at the same time?

Dasylab, version: 8.0.04
Acquirement Card: PCI1002L
When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
same time, DasyLab tell me the rate is too high and stop.
so, I searched the manual book1 (user guide) for that, it showed me :
To internally equalize measurement time and system time in the analog input, digital input and counter
hardware modules, use the following settings:
   Synchronization: PC Clock
   Sampling rate: <= 5Hz
   Block size: =1
the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
application.
so, how to improve it? who can give me a example programm for me. thanks!
by the way, I come from China, my English isn't good, I'm sorry.
Allen, China.

Hi,
Have things changed over the years?
I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
1. What can be done to synchronise AI with DO?
2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
Thanks in advance!

How to output the digital clock and synchronization signal from the NI USB-6211

Hello,
I need to connect the NI USB-6211 to control a digital to analog convertor chip (AD5541). However, this chip requires three input signals :1) Clock input, 2) Logic input or a synchronization signal and 3) Signal Serial Data input (CS, SCLK, DIN).
how to output the digital clock and the synchronization signal from the NI USB-6211?

Hi SaberSaber,
You should be able to use the counters to generate a pulse train that could be used for clock and synch purposes.
Hope this helps. Let us know if you have more questions.
Dave C.
Applications Engineer
National Instruments

Digital signatures and inbound documents

Hello all,
is it possible to import document previously digitaly signed in another system.
Scenario will be to have another (partner) system in which user create document with digital sign. This document is transfered to SAP R/3 with digital sign, and it should create document which has digital sign on it.
Is this scenario possible?
Do we need to have user from partner system created in SAP system with proper authorizations or document will be signed on some other way.
TIA
Gordan

You can edit a signed PDF document (assuming you are not using the field collection feature). This will not "Invalidate" the signature, but it will change the status of the signature.
I have attached two screen shots to illustrate... To generate these, I signed a PDF, changed some data and re-validated the signature.
ValidationStatus.gif shows the status of the actual signature.
DocStatus.gif shows a "roll-up" status (meaning it checks all signatures on a doc and displays an overview) of the signed document.
Regards
Steve

Producer consumer with analog and digital inputs and outputs

Hi everyone,
I am working on a control system program for some practical test work. Currently I am working on the data acuisition component of the Labview program. My architecture is produced-consumer loops with a que. My system will have analog inputs, analog outputs, digital inputs and digital outputs. It's not a time critical sytem, but I would like all of the data acquisition to be synchronised. I have attached my program as it is at the moment. I am having trouble getting all of the data into the que since I have two data types. Also, I'm not sure if i've synchronised the four read/write sequences correctly. I would greatly appreciate if somebody could take a look at my program and give me some advice. Thanks in advance.
Solved!
Go to Solution.
Attachments:
control_v2_DAQ loop.vi ‏46 KB

Robert, the specific error that I get is:
Error -200462 occurred at DAQmx Start Task.vi:6
Possible reason(s):
Generation cannot be started because the output buffer is empty.
Write data before starting a buffered generation. The following actions can empty the buffer: changing the size of the buffer, unreserving a task, setting the Regeneration Mode property, changing the Sample Mode, or configuring retriggering.
Task Name: Heater testing lab digital outputs
This error occurs at the 'DAQmx write.vi' function. I just want to sent one sample per second, for each channel. I would like the producer and consumer loops to each run once every second.
I have attached part of my code with just the data acquisition and writing. Any help would be greatly appreciated.
Attachments:
control_v2_ML_simple.vi ‏83 KB

Digital DIN no working (inspire 5700)

hi....
i have some problem here, when i use digital connnection (digital DIN) connect to my soundblaster audigy, and switch to digital output, but it no sound at all, i only able to use analog connection now.
is that the decoder problem or my soundcard problem? or software problem?

hi body,where did u get that cable?i need that cable too!!!!!!!!!
please help me out!!!!u can check my post in this forum
http://forums.creative.com/creativel...message.id=448

Digital DIN cable !!! inspire 5700+audigy 2ZS

Hi,
i need help with my inspire 5700. i don't have a digital din cable (for digital connecting audigy + inspire). Support says that cable is not available. does anybody know where to get this cable (4pole digital jack to 9pole digital DIN) or how to make this cable?
Mic

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

Where can I get a longer Digital DIN cable? Help!

I need an extension for the digital din cable to my creative inspire 5.1 digital 5700. I can't get it anywhere and my speakers are now connected with the normal stereo speaker cable extension and I can't output 5.1 sound off of my PC cause only 2 speakers are working.Please help me. Maybe someone knows where I can buy such an extension or maybe make one on my own? Andrew

Hi I have the same problem I need to find replacements for the 2 digital 9pin din cables the 5700 speaker sets shipped with.Anyone have any idea,s?Thanks and good luck in finding your cable andrew if you do let me know via the forum reply please.farcry34

Use of digital connection and Headphones - is it possibl

I am extremely happy as I have found that by using the "Flexijack" configured as a digital output and connecting it to my Logitech speakers I have resolved a problem that had developed with my front speakers going missing.
BUT when I try and use my headset for Skype I get distorted sound. Without the earphones connected the sound is perfect through the speakers. Is there a configuration I can use or I am expecting too much of the system ?
I have an OEM version of the X-Fi supplied as part of a Dell Dimension 950
Thanks in advance
Steve

It really runs with APDU buffer of usual Java Cards! Of course it works with the APDU buffer: it's a global array.
But SIM cards haven't such global array. Does it mean
that this scenario will not run there?Yes, it won't. As the APDU buffer is a global array (what implies that it is also a temporary JCRE entry point object), you're not able to store the reference in a class attribute or instance variable. So it's not useable for a Toolkit Applet which has been triggerd by an event.
A work around would be to pass each single primitive data unit to the Shareable Interface Object. But don't ask for performance ;o)

PKI- Digital signature and doc cypher

Hello everybody, I have a problem and I need help please. This is my situation:
I would like to cypher a world document and add a digital signature. I want to use certificates to do so. That is why I have developed a PKi in order to get certificates to use digital signature and ASYMMETRIC encryption. I have to add that I am trying to assure
non repudiation, integrity and confidentiality of word documents.
Is there any way to do it? if so, how can i do it and what software application do you recommend? thanks!

As Elke explains and shows via that link, that informs you how to digitally sign a document. However a digital signature only provides non-repudiation and integrity of a document, not confidentiality. Symmetric Encryption is needed for that.
You would not use Asymmetric encryption to bulk encrypt files, it would be too slow.
Unfortunately there is no easy way to symmetrically encrypt files with the tools available in modern Windows distributions. Personally I would digitally sign the document, then use a tool like 7-Zip
to encrypt them with AES-256 and a passphrase, or to go one better than that use Symantec Encryption Desktop. Using the latter allows you to do encrypt either with a passphrase, or with
your targets PGP public key (that does of course assume they are also using PGP) so that only they can decrypt it with their private half.
Also signing an Office document (or PDF for that matter) with an internal PKI certificate is only valuable if the documents are internally distributed within the same organisation, or when the other organisation(s) trust your root CA certificate, otherwise
they will not be able to verify the signature (think of it like the error in your browser with the red X stating there is a problem with your certificate).
I'm not quite sure what your use case is, but if it's just for distributing internal documents then no problem. Otherwise you'll have to get a document signing certificate from a vendor like
GlobalSign who have a trusted root certificate which ships with most operating systems so that anyone who receives the document can verify it.
D

Configure the stamp ,Digital signature and water mark in DMS

Hi...
I want to configure the stamp ,Digital signature and water mark in for my client in DMS.
Stamp:detaiils showing doc type, doc status,who has open, doc no,version,date and time
Digital Sign:with respect to approval (system should ask user name and password while approvig)
Water mark:for the status (Draft/approved)
Can anybody guide me to do this?Please explan in details as i am doing it first time.
In addition to do this what addition system requirement is needed?
Regards,
Sandip

Hi Sandip,
Please refer below links for required details
For Redlining Redlining
Watermark DMS Seal system watermarking solution
Hope this will answer your query.
Regards,
Deepak Kori

Digital Din and 2.1 systems.

Similar Messages

Maybe you are looking for