Digital Editions 3.0 not recognising that computer is authorised

Hi
I downloaded Digital Editions 3.0 onto a computer that was already authorised with my Adobe ID.  ADE has not picked up this authorisation and says that the computer is not authorised.  When I try and authroise it via ADE3.0 it has a box for "eBook Vendor" which is greyed out so I cannot insert anything and when I complete the other boxes with my Adobe ID and password it returns an Activation Server Error with the code "E_AUTH_NOT_READY".
Any suggestions?
Thanks
Tedd

Hi Tedd,
Please check the KB : http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
Regards,
Rave

Similar Messages

  • I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

    i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours.Help me pls.

    I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours. Help me please.
    iOS 8.1.3
    iPhone 5s 32 GB
    CPU 64 bit

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have updated my adobe digital editions but application not recognizing it, can't open epub book

    I have updated my adobe digital editions but application not recognizing it, can't open epub book

    What Adobe Digital app on your iPad? If you are talking about a third-party app (like Bluefire Reader) you need to connect your iPad to your computer, open iTunes, select the iPad, and select Apps in the Sidebar. Scroll down to the File Sharing section, select the app you plan on using, select Add (bottom right), navigate to where the book is on your computer, select the book and sync your iPad.

  • Adobe digital editions activation errer server for my computer, what do I do

    adobe digital editions activation errer server for my computer, what do I do

    You can do it with Calibre.   http://calibre-ebook.com/
    You can do it in one step very easily without too much control,
    or via HTML, add your style sheet manually, then to epub (I haven't tried this).
    In fact, Calibre will also transfer to an ereader and no need to use ADE at all.
    (I only use ADE rather than Calibre where there is a DRM file involved.)
    There are quite a few other software that will do it as well.

  • Adobe Digital Editions for Galaxy Note 10.1

    I am having dificulty using Adobe Digital Editions in galaxy note 10.1 to view a digital book that I recently purchased. I downloaded Adobe Content Viewer, but I cannot sign in with my adobe.com account.
    Thanks

    This is the Reader forum. The Digital Editions one is here:
    http://forums.adobe.com/community/adobe_digital_editions

  • I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

  • Replacement ipod touch not recognised by computer/itunes - help?

    Apple store replace ipod touch 4thgen.  New ipod not recognised by computer/itunes.  Can't figure out the problem - help please.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes

    ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

    Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
    Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

    Hi Elba,
    Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
    I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
    I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
    The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
    If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
    Completely baffled by it. Any idea what could be the reason?
    Kind regards,
    Nik

  • I installed Adobe Photoshop Elements 11 in my computer before. Right now I'm not using that computer anymore and want to re-install the software to a new computer. I still have the redemption code. Can you please provide me the download link or which ever

    I installed Adobe Photoshop Elements 11 in my computer before. Right now I'm not using that computer anymore and want to re-install the software to a new computer. I still have the redemption code. Can you please provide me the download link or which ever way I can re-install the software to the new computer? Thank you.

    Hi,
    Please go to the link below to download Photoshop elements 11
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    To get your serial number from redemption code click on the link below
    https://redeem.licenses.adobe.com/getserial/s/redeem
    Thank you,
    Mohd. Naseem

  • I'm from the uk and I'm trying to send a message to someone who lives in the US, however it does not recognise that they have an iPhone so it won't send as an iMessage, any solutions?

    I'm from the uk and I'm trying to send a message to someone who lives in the US, however it does not recognise that they have an iPhone so it won't send as an iMessage, any solutions?

    Hi Will_medlock,
    If you are having issues sending iMessages to a specific person overseas, you may find the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    I have over 250G backed up and I really don't want to reset everything and start again.
    Not sure what you mean here. 
    A reset will not affect any of the data on the Time Capsule hard drive.  You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
    I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
    I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
    Another user may be able to offer more input on Mavericks.

  • How to transfer an eBook from Adobe Digital Edition to samsung note 2 ?

    How to transfer an eBook from Adobe Digital Edition to samsung note 2 ?

    You will need to install an Adobe DRM compatible app on the samsung, such as Bluefire or Aldiko.
    Then copy books using a file manager (eg Windows Explorer, Mac Finder) to the device as a mounted drive.
    You can't copy from ADE (digital editions) directly as you can for a dedicated eReader device.

  • Do I need Adobe Digital Editions 2 and 3. on my computer?

    Recently I was going through 'Programs and Features' and realized I had Adobe Digital Editions 2 and 3 installed. Are both needed. I am running Vista on Windows 7 (64 bit).
    I have medical memory problems and am finding Chrome to be challenging.
    I also wonder if this could be related to the problem I am having with not being able to open Adobe Reader. I have the JavaScript all figured out and am trying everything I can think of to open Adobe Reader. I am open to any suggestions.
    Because of my problems all replys need to be in English (not in computer jargon) and in a 1, 2, 3 sequence. Sorry to be troublesome but thats me.
    Thanks to all who want to give it a try.

    I had the same issue.  I uninstalled version 2 and my program ran fine.  Well, it still has the same problem I had with version 2, which is why I'm in the forums right now, but you don't need both versions.  I don't know if having both will cause issues or not (some extensions and apps have this issue) from what I saw, downloading version 3 did not update version 2.  You just got another ADE program that was a bit newer.
    However, I'm not an expert.  This is just what I experienced by uninstalling it.  I highly doubt you'd have a problem.  And if you do have some weird issue from it?  Uninstall all ADE programs from your computer, and then reinstall the most current version available.  Should fix you right up.  Good luck!
    Lovies,
    Selenity Jade
    Coffee Addict & Insomniac

Maybe you are looking for

  • HOW create support message ONLY for KEY USER

    Hi all, I just configured my service desk and I wanted to give only the key users the permission to create support messages. But every user have the rights to create a message from the satellite system. How can I prevent that? Is it possible to hide

  • Help! Changing bleed/margins on even & odd pages in same file?

    I'm laying out a children's book and the printer requires the interior files to be submitted in single page layout(no spreads). The binding side margin and bleed is different than the top, bottom, and outside edges - basically the pages mirror each o

  • GPS "My Location" if OFF by about a Kilometer

    I have installed Nokia Maps version 3.04 - 0.1.23.112 on my NOKIA E72.  When I click on "my position" option GPS shows my location off by about 1 km some times one side and some times on the other side of my actual location on the map.  Earlier I did

  • S032 has incorrect stock valuation quantity

    Hi All, We are performing an implementation and are loading stock take-on. We have noticed an inconsistency between the LIS and MB52 (material master stock valuation). After some investigations it only happens when we are loading materials using mult

  • Can i connect an imac to my existing windows network

    Hi...I am thinking of buying an imac for home use, but I have run my business from home so also have a network & server which is running windows - will I be able to connect to the network for file access from the server etc??