Digital I/O Module... thanks Creative and Shannon in support for NOTHI

I love the way she brushes you off with a 'swap PCI cards and reload the drivers.' The thing that's so frustrating is that she knows **bleep* good and well that it's not going to fix the problem, yet she has the cold heart to send you off to perform an hour worth of work for no good reason. If creative cares this little about its users, then I'll be sure to never use them again. I've used Sound Blaster cards since the old ORIGINAL 8-bit sound card, a full length 8-bit ISA card in a 286. They've made a lot of money off of me, but their greed and lack of support has ensured I will never buy another product from them again. Note... my issue is the 'switching between Mic-In and Digial I/O every time the PC is rebooted' problem. They (CLabs) know about it, they know it's a problem, and it's probably a very simple one to fix. They just flat out don't care. A big **bleeeeeeeeeeeep** AdamFt. Worth, TXMessage Edited by Dale-CL on 2-20-2006 05:54 PM

adam2hick: First off, please leave the foul language off the forums. The censor is there for a reason, work-around it again and you'll probably be banned.
Next, Our advisors don't just send customers off on random tasks. I was a phone advisor here once, and I can tell you that doesn't happen. If she sent you to do something like that, then likely someone has managed to fix the problem that way before. Just because a particular fix doesn't work for you, doesn't mean it doesn't work. Computers are like that sometimes.
And finally, generally when I have run into issues with settings reverting themselves after a reboot, I find it's the antivirus programs causing the issue. Windows (and the CL sound manager in this case too) stores it's settings in the registry. Certain antivirus programs (not all of them, just the pain-in-the-butt ones) often block that by changing the registry back when Windows boots up. So any settings stored there are lost, often wit h the effects you are having.
I can't promise this will fix it in your case, it has merely worked for me repeatedly in the past for other customers. Just check your antivirus software's settings for any kind of "registry protection" and turn it off. If you can't find any, try uninstalling your antivirus/spyware protection, reboot, change that setting, reboot again, and see if the problem went away. If it did, you can narrow down what program may be causing it.
Good luck,
Dale

Similar Messages

When I try to sign in to Apps Store it says my computer cannot be verified and to contact support for assistance.

When I try to sign in to Apps Store it says my computer cannot be verified and to contact support for assistance. Can someone please help me with this?

Apple ID security issues -
Call Apple Care for your country and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699

Netflix and lack of support for iPhone

Is it just me? I've been trying to stream a movie via netflix on the iPhone 4, however, every time it starts saying Loading Movie... it sort of "crashes" back to the video selection screen. Of course my first thought is to search every support and search engine known to man but that yielded no results. Netflix has no support for the iPhone app on their website at all, why release something when there's no support, isn't that called a beta? Please help if anybody has experienced this problem. Thank you in advance.

I have the same exact problem on my iPod Touch 3rd gen 32GB. On my iPhone 3GS however on the same wifi network everything works fine.
When the iPod Touch first boots up I get the Alert: "Cannot reach netflix.com. Please try again later." (subsequent times, this error is not shown, but the movies still do not play) Pressing ok continues to launch Netflix and shows movie "Like"s and selecting Instant Queue menu has no problem showing my own Instant Queue. The problem occurs when you attempt to Play a movie. Pressing Play results in a message "loading...", then for a brief second the Netflix landscape red screen appears and returns back to where I pressed the Play button.
Tried updating to 4.1 and tried reinstalling Netflix without any luck.

I'm on a MacBook pro .. how can FF be kept from crashing, freezing, being slow in general, and get more support for Plugins (which break every time I update)? Thanks in advance, I really do want to see FF regain the glory it once had!

I've been using Firefox since version 1 and it's always been my #1 web browser of choice. Since version 4, Firefox has become my #3 browser of choice, behind Safari & Chrome. I would like FF to go back to being #1, because frankly FF 4 & FF 5 have been a royal pain in the a$$.
Since FF 4, my SEO for Firefox plugin has not worked properly. Since FF 5, the Google Toolbar has not worked ... probably soon to have a fix, I'm sure.

Poetsave wrote:
I just bought my first Mac, Macbook Pro 15in 2.53GHz Intel Core 2 Duo, 4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 SDRAM, 320GB Serial ATA; 5400 rpm.
I installed XP of a disk I had then used a Vista upgrade disk i had to install Vista. I noticed quickly that it was a 32bit version since it only recognized 3gb ram. I have been trolling the forums here and still have yet to get a straight answer on how to install vista 64 and have it actually work. So when what you are saying is I need a Mac Pro disk? Not the disk that came with my Macbook Pro to install all the drivers I need?
James
So it really depends. If you have an "early 2008" MBP as follows:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.6 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version: 1.27f1
Serial Number: xxxxxxxxxxx
Sudden Motion Sensor:
State: Enabled
Then the disk from an equivalent Mac Pro (needs to be of similar vintage) may help you. But if you have once of the newer models ("late 2008") this has an nVidia chipset in it and the drivers for that may not be on the Mac Pro.
You'll need 64bit drivers for the nVidia chipset for this to work.
A side note is that the EFI implementation on the "Early 2008" MPB might well be 32 bit, so it's debatable if you get the full advantage of 64bit Vista in terms of performance. It worked for me, but YMMV. In any case when Windows 7 ships, my Macs will mostly be in "Legacy" mode.
-- Nick

Airport problem with iMAC 27" and serious service support for indonesia

Hi all,
i can't seem to get any help from anywhere else. so i try to post it here.
i tried to call the apple store (indonesia) which i bought this imac 27" from. got transfered 4 times and i had to explain it to them all over. in the end i got to speak to the technician and i asked whether i can get a replacement and they don't think it's the correct solution and leave me hanging here.
the apple store is listed as an apple authorized service provider (AASP) or apple authorized distributor (AAD):
iBox by Padang Digital Indonesia - Apple Authorised Service Provider
Puri Imperium Office Plaza, (Belakang Menara Imperium)
Jl. Kuningan Madya Kav. 5-6, Jakarta
12980
Tel: 62 21 8370-iBox (4269); 830 6763
Fax: 62 21 830 6730
Email: [email protected]
Web: http://www.ibox.co.id
i called the apple support on the apple.com (0018 03061 2009 for indonesia) today wednesday 19 may 2010, time 1:12pm indonesia local time (GMT +7) i didn't get the guy's name but i can tell he's Indian from the accent, i told him what the problem is, he told me to wait, i waited for 10 minutes and he hung up on me at 1:24pm. please check on the record, because i was told the whole conversation was recorded.
so, let's go to the problem:
i can't share my internet with airport built-in in my imac 27".
I'm using ZTE usb hsdpa modem connected to the imac. (fyi, my friend is using the same exact modem and internet provider and don't have any problems with internet sharing using his macbook)
i tried to share the internet through the airport express simply with these steps:
1. open the system preferences, internet sharing,
2. connection with "ZTE usb modem", and the box next to "Airport" is ticked
3. turn on the internet sharing
4. press start
5. yes the firewall is off.
and these are what i'm having right now:
1. the airport symbol wont turn into an arrow
2. when i open the network preferences, it says: AirPort is turned on but is not connected to a network. (color is orange not green)
3. i searched the wireless network with my ipod touch and i found nothing
4. if i try to "create a network" here's what it says "There was an error creating your computer-to-computer network."
5. this are the details on the airport card:
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: RoW
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Not Associated
and yes, i've updated all the airport software and i stick on the 10.6.2 os.
It seems like people who has this latest imac 27" also having problems with the airport express. and they somehow got a replacement.
http://discussions.apple.com/thread.jspa?threadID=2261196&tstart=0&messageID=109 80828
so, i really really appreciate if i can get help here.
many thanks and best regards,
irene

If you have anything configured in System Preferences/Network/Airport then you have conflicts configured into the network. I suggest that you start from the beginning. Do not assume anything. Do not take any short cuts. Start fresh.
Go to Sys Prefs/Sharing turn off Internet Sharing. Go to Sys Prefs/Network, highlight AirPort and press the - symbol below to remove the AirPort interface. Now press the + symbol and create a new AirPort Interface. In the new AirPort interface do not turn on AirPort. You should only select the box to show AirPort Status in the menu bar. Now press Apply.
Go to Sys Prefs/Sharing and follow the steps 1 through 11 in my first post.
In step 11 Sys Prefs should ask you to turn on AirPort. Turn it on. It should next ask you to start Internet Sharing. Start Internet Sharing.
The AirPort Status in the menu bar should show AirPort is on and have an arrow pointing up. In the AirPort Status dropdown menu it should show AirPort is ON, Internet Sharing is ON and it should show the name of the Internet Sharing network that you created.

When I start my computer, I get popup error msg that "Apple Sync Notifier" has stopped working. I have tried several remedies suggested by those on the Apple (and Roxio) tech support. Nothing has worked. Trying to burn disc or puchased ITUNES.

I have been trying to burn newly purchased (as well as last year purchases) ITunes to a disc. I had burned some of these songs to a disc last year and all went well. Now I have been getting this popup telling me that the AppleSync Notifier has stoped working & the corefoundation.dll needs to be re-installed. Also that Windows will try to fix the problem. Every time I try to burn the disc, the computer sends the disc back out and the screen tells me to put in a blank recordable disc. I have tried 4 different new discs now and the same thing happens.
I am running Windows Vista.
Have been to the Roxio web site for help as well as Apple.
Have tried many "fixes" such as: updating latest version of Direct X from the Microsoft website; Disabling startup items; going to local disc C and into the Apple/Apple Appplication support and right-clicking on the SQLite3.dll and moving it tomobile support device window. Nothing has worked. What can I do to get some music recorder? Should I buy a new cassette deck and record onto tape like I did 20 years ago? This is a very important disc I am making as a gift & I need to get it done by this weekend. Is there anyone that can offer good advice?

love paying a lot of money for something that doesn't work right, thanks apple

CUCM and Unity LDAP Support for Server 2008 R2

I am planning on upgrading our Primary DC from Server 2003 Standard to Server 2008 R2. We current have 2 CUCM's version 7.1.5.31900-3 and 1 Cisco Unity version 7.0 (2). Both reference LDAP and/or GC. I need to know will everything break once I demote the 2003 DC. I already have one 2008 R2 domain controller in place. Also is the 2008 R2 domain functional level supported?

Hi,
The directory hierachy for a backup taken using windows server backup will be something like this:
\WindowsImageBackup\<ServerName>\<Backup datetime>\<guid name>.vhd file along with some xml config files.
The directory heirachy above suggests the backup was not taken using Windows Server Backup, at least directly, if it is taken using some software scripted over windows server backup, the .chm file may belong to that software.
The .vhd file created by windows server backup is not mountable in readonly mode, it is mountable in readwrite mode only.
Thanks,
Abhinav
This posting is provided "AS IS" with no warranties, and confers no rights

Remote login, htaccess and simulated browser support for frames

There is this remote, hosted web application that I want to connect to and add/change some content on-the-fly (eg. parse the page before it is sent to the client's browser). The first problem is how to login to this remote site that requires a frames-based browser. Is there anything in the Java arsenal that can emulate a browser with frames support?
Assuming there is and we can login, what would be the best way to parse the page before it is sent to the client's browser? Should I use htaccess to detect the page and have another page process it? Any ideas or suggestions would be welcomed and appreciated. Thank you.

I have no issues using remote panels in Firefox (2.0) I believ 1.5 worked as well.
You only have to make sure you accept the ActiveX component
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

JMS Clustering and JBoss JTA support for 10.1.3

I would like to migrate my codebase to 10.1.3dp3r2 and have noticed that the framework for clustering (cache coordination) and JTA have changed significantly.
The documentation appears to have headers for these subjects, but there is very little information on how to migrate both of these features over.
I've scanned this forum and the website, but I can't find any tutorials. Are there any resources available?
Thanks,
Nate

Hi,
take a look here
http://dietrichschroff.blogspot.com/search/label/Support?max-results=100
there should be links you should follow.

Creative labs new tech 'support' for Austra

Up until last week, I'd been dealing with the australian branch of crati've labs tech support. It appears over the last week or so theres been a changeover and its been sourced to singapore or something. I'd just like to say how utterly useless its been. I've been dealing with a terrible phone line, through which it is incredibly hard to understand anything i hear, that is sokmething i could overcome, but, the next problem is the operators.
Many of them cannot understand me, at all, now, I'm the first to admit I have somewhat of an Australain accent, its nothing extreme though, and I'm told I'm quite well spoken. These guys in some instances cannot udnerstand a word I am saying, in other instances they do sort of get me, but, when it comes to giving out say, an email address, are totally lost.
Yesterday I spent, oh, 5 minutes, trying to tell this guy that my last name, was spelt like this 'mcmahon', not like this m3mahon. It seems C and 3 are not easy to seperate. Not even giving a C for Cat, or C for Congo could help matters. I did manage to give out a phone number eventually, but still, no good.
All I was chasing up was the cost of a repair for my zen touch, the touch pad has gone haywire. A week or so ago I dealt with the aussie service center, and, they informed me of the cost, faxed me out a form to fill out, to start off the repair and I was good to go. I misplaced the repair cost, so, I thought it would be easy to chase this up. No way, no one in the new help center had a clue what i was talking about, even once i got past the enormous and extremly frustrating language barrier.
Just letting you know creative that unfortunately, this is the last straw. Your products are good, but, they arn't that good.Message Edited by macka_x on 03-07-200607:32 PM

Duplicate post.
Jason

Single Frame with Back and Next Jbutton support for Swing

Hi All,
I need a help regarding to th JFrame.
I have to design a tool with Back and next button with a single frame. With Next button action i should move to a new Frame content and with Back button i should back to the previous one.
How should i proceed?
Thanks a lot in advance.

1) That's a Swing question. There a {forum:id=950} forum.
2) This is a very common need. There is no built-in widget in the JDK, and a lot of custom approaches, including in libraries. Google for "Java Swing wizard"
3) If you roll your own, the simplest way, as far as the GUI layer goes, is to stuff your panels in a CardLayout, and have your buttons switch the current "card". Very simple: http://download.oracle.com/javase/tutorial/uiswing/layout/card.html
4) The trick may be in keeping the "business logic" in sync (if for example panel 2 depends on processing info from panel 1). If you're new to java and Swing, make sure you understand objects and references

Thanks HP Support For Nothing - Windows 10 Update - Laptop Issues!

I am one of many who has posted on here over the past couple about the issues with laptops shutting down / going into sleep after the Windows 10 update last week. There are now so many threads on the HP Forums I’ve lost count. I’ve tried all the recommended tricks, including updating the BIOS Driver from the HP Website, but nothing works! I’ve also updated all other drivers. I’ve spoken to HP Support who couldn’t care less about the issue and are not working on a fix – they seem to blame Microsoft for the problem and tell me to speak to them! Better still return my laptop back to the shop because it is still under warranty. Thanks HP for being supportive with this problem. BTW being informed that you are now telling people not to update to Windows 10 until Microsoft have ironed out the bugs and created fixes is really not helpful! Perhaps I’ll think again about buying a HP product in the future. Really poor customer service!

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and see that you are having issue with your Notebook PC. I would be happy to assist you. I just need your specific Model Numbers (How Do I Find My Model Number or Product Number?). After reading your post on the HP Support Forums, I believe that you are having two issues on your Notebook PC's, after your Windows 10 upgrade. You had mentioned that your HP Recovery could not open when you were logged into your Microsoft Account. You also mentioned that on your Notebook PC's it is showing you as "Standard" and not the "Administrator". I did some research for you and I found a document called HP PCs - Managing User Accounts and Logins (Windows 10). The information in this document describes the different account types in Windows 10, and explains how to change account types and how to save and change passwords. Just so I understand correctly, is it the HP System Recovery that will not open? Please follow the document provided and re-post with any information or results. Thanks!

Upgrading to Mountain Lion and lack of support for Power PC Applications

Hi
I have been reading with interest the comments and questions about this.
I am a bit of a novice with pc/mac terminology so was baffled to receive the message about Power PC Applications. I merely upgraded to Lion thinking it would be great to have the latest software on my Mac but am now unable to log into work remotely.
I log in using "Cryptocard" software and tokens. Does anyone have any experience of getting around the power pc application issue using the Cryptocard software? I an hoping I wont need to revert back to the previous software after spending £13 upgrading it!
Have contacted Cryptocard for support but comments are welcome
Many thanks

I have no experience with Cryptocards, but,
Workarounds:
1. Revert to the original OS X that was operating on your Mac;
2. Upgrade your PowerPC applications to Intel versions;
3. Replace your software with alternatives that work in Lion;
4. Partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" system to run your PPC applications but not concurrently with Lion; or
5. Do what I do, install Snow Leopard (with Rosetta) into Parallels in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions are here:
http://forums.macrumors.com/showthread.php?t=1365439

Why no email addy for firefox, and why no support for firefox

moving shortly to chrome or any browser that does have an email addy and does support its product. since the latest update firefox comes up with "not responding" after every page or click on screen, however as their is no email to write to in order to find out whats gone wrong, then it shows that firefox have no confidence in their own product as they refuse to respond or have a contact us email addy. mind you its nice to know that this has happened before firefox 4 appeared as that will be even more hopeless if the latest update is anything to go by. should think that ie will be overjoyed at the large numbers coming back to them due to firefox's untested updates that kill firefox.

Setting a different ringtone for a standard cell phone call versus a FaceTime call is not a feature of the iPhone. Submit your feedback requesting such a feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Camera Raw CC and CS6 and Lightroom 5 Support for Canon SX60 Canon 7D Mark II

I have just bought my wife Canon SX60 and loaded pictures into Bridge and saw that Camera Raw does not recognize Canon SX60 CR2s. I checked the supported cameras and saw SX60 is not in the list. I will be purchasing a Canon 7D Mark II on Tuesday and see that it is also not supported. I saw in a forum post that the 7D is not in the current Camera 8.7 but will be part of the Camera Raw 8.7 "production release". I currently have Photoshop CC, Photoshop CS6 and Lightroom 5 will both cameras be supported in the next "production version" of Camera Raw and Lightroom 5 and when is it scheduled for release (I saw some thoughts that it would be by the end of year but was hopefully we can get a more definitive date).
Thanks

It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.

Digital I/O Module... thanks Creative and Shannon in support for NOTHI

Similar Messages

Maybe you are looking for